Homogenous Synthesis of Monodisperse High Oligomers of 3-Hexylthiophene by Temperature Cycling

A Ni0(cod)(dq) (COD: 1,5-cycloctadiene; DQ: duroquinone) complex as a catalyst precursor for oligothiophene and polythiophene synthesis

Nickel-catalyzed syntheses of oligothiophene and polythiophene were carried out with Ni(cod)(dq) (COD: 1,5-cycloctadiene; DQ: duroquinone) as a catalyst precursor. Studies on the ligand exchange of Ni(cod)(dq) revealed that a high temperature was necessary to replace COD and DQ with PPh3 and N-heterocyclic carbene IPr. A coupling reaction of a metalated 3-hexylthiophene with 2-chloro-3-hexylthiophene employing Ni(cod)(dq) with IPr proceeded with a remarkably reduced amount of homocoupling byproduct. Polymerization of 2-chloro-3-hexylthiophene with Ni(cod)(dq)/DPPP also resulted in the reduction of the regioregularity defect.

Ligand Relay for Nickel-Catalyzed Decarbonylative Alkylation of Aroyl Chlorides

Transition metal-catalyzed direct decarboxylative transformations of aromatic carboxylic acids usually require high temperatures, which limit the substrate's scope, especially for late-stage applications. The development of the selective decarbonylative of carboxylic acid derivatives, especially the most fundamental aroyl chlorides, with stable and cheap electrophiles under mild conditions is highly desirable and meaningful, but remains challenging. Herein, a strategy of nickel-catalyzed decarbonylative alkylation of aroyl chlorides via phosphine/nitrogen ligand relay is reported. The simple phosphine ligand is found essential for the decarbonylation step, while the nitrogen ligand promotes the cross-electrophile coupling. Such a ligand relay system can effectively and orderly carry out the catalytic process at room temperature, utilizing easily available aroyl chlorides as an aryl electrophile for reductive alkylation. This discovery provides a new strategy for direct decarbonylative coupling, features operationally simple, mild conditions, and excellent functional group tolerance. The mild approach is applied to the late-stage methylation of various pharmaceuticals. Extensive experiments are carried out to provide insights into the reaction pathway and support the ligand relay process.

Blade Coating Poly(3-hexylthiophene): The Importance of Molecular Weight on Thin-Film Microstructures

Poly(3-hexylthiophene) is one of the most prevalent and promising conjugated polymers for use in organic electronics. However, the deposition of this material in thin films is highly dependent on the process, such as blade coating versus spin coating and material properties such as molecular weight. Typically, large polymer dispersity makes it difficult to isolate the effect of molecular weight without considering a distribution. In this study, we characterize oligothiophenes of exactly 8, 11, and 14 repeat units, which were deposited into thin films by varying blade coating conditions and postdeposition annealing. From synchrotron-based grazing incidence wide-angle X-ray scattering (GIWAXS), scanning transmission X-ray microscopy (STXM) and near-edge X-ray absorption fine structure spectroscopy (NEXAFS), Raman microscopy, optical microscopy, and X-ray diffraction (XRD), it was suggested that higher molecular weight polymers exhibit a fast-forming crystalline polymorph (form-1) while low molecular weight polymers exhibit a slow forming polymorph (form-2) with large domain boundaries. As molecular weight is gradually increased, the polymorph formed transitions from form-1 and form-2, where 11 repeat unit oligomers display both polymorphs. We also found that processing conditions can increase the formation of the form-2 polymorph. We also report improved organic thin film transistor (OTFT) performance when form-1 is present. Overall, oligothiophene polymorph formation is highly dependent on the molecular weight and processing conditions, providing critical insight into the importance of polymer weight control in the development of thin-film electronics based on conjugated polymers.

Group 16 conjugated polymers based on furan, thiophene, selenophene, and tellurophene

Five-membered aromatic rings containing Group 16 elements (O, S, Se, and Te), also referred as chalcogenophenes, are ubiquitous building blocks for π-conjugated polymers (CPs). Among these, polythiophenes have been established as a model system to study the interplay between molecular structure, solid-state organization, and electronic performance. The judicious substitution of alternative heteroatoms into polythiophenes is a promising strategy for tuning their properties and improving the performance of derived organic electronic devices, thus leading to the recent abundance of CPs containing furan, selenophene, and tellurophene. In this review, we first discuss the current status of Kumada, Negishi, Murahashi, Suzuki-Miyaura, and direct arylation polymerizations, representing the best routes to access well-defined chalcogenophene-containing homopolymers and copolymers. The self-assembly, optical, solid-state, and electronic properties of these polymers and their influence on device performance are then summarized. In addition, we highlight post-polymerization modifications as effective methods to transform polychalcogenophene backbones or side chains in ways that are unobtainable by direct polymerization. Finally, the major challenges and future outlook in this field are presented.

Palladium Mediated Synthesis of Protein-Polyarene Conjugates

Catalyst transfer polymerization (CTP) is widely applied to the synthesis of well-defined π-conjugated polymers. Unlike other polymerization reactions that can be performed in water (e.g., controlled radical polymerizations and ring-opening polymerizations), CTP has yet to be adapted for the modification of biopolymers. Here, we report the use of protein-palladium oxidative addition complexes (OACs) that enable catalyst transfer polymerization to furnish protein-polyarene conjugates. These polymerizations occur with electron-deficient monomers in aqueous buffers open to air at mild (≤37 °C) temperatures with full conversion of the protein OAC and an average polymer length of nine repeating units. Proteins with polyarene chains terminated with palladium OACs can be readily isolated. Direct evidence of protein-polyarene OAC formation was obtained using mass spectrometry, and all protein-polyarene chain ends were uniformly functionalized via C-S arylation to terminate the polymerization with a small molecule thiol or a cysteine-containing protein.

Precision Synthesis of Conjugated Polymers Using the Kumada Methodology

Since the discovery of conductive poly(acetylene), the study of conjugated polymers has remained an active and interdisciplinary frontier between polymer chemistry, polymer physics, computation, and device engineering. One of the ultimate goals of polymer science is to reliably synthesize structures, similar to small molecule synthesis. Kumada catalyst-transfer polymerization (KCTP) is a powerful tool for synthesizing conjugated polymers with predictable molecular weights, narrow dispersities, specific end groups, and complex backbone architectures. However, expanding the monomer scope beyond the well-studied 3-alkylthiophenes to include electron-deficient and complex heterocycles has been difficult. Revisiting the successful applications of KCTP can help us gain new insight into the CTP mechanisms and thus inspire breakthroughs in the controlled polymerization of challenging π-conjugated monomers.In this Account, we highlight our efforts over the past decade to achieve controlled synthesis of homopolymers (p-type and n-type), copolymers (diblock and statistical), and monodisperse high oligomers. We first give a brief introduction of the mechanism and state-of-the-art of KCTP. Since the extent of polymerization control is determined by steric and electronic effects of both the catalyst and monomer, the polymerization can be optimized by modifying monomer and catalyst structures, as well as finding a well-matched monomer-catalyst system. We discuss the effects of side-chain steric hindrance and halogens in the context of heavy atom substituted monomers. By moving the side-chain branch point one carbon atom away from the heterocycle to alleviate steric crowding and stabilize the catalyst resting state, we were able to successfully control the polymerization of new tellurophene monomers. Inspired by innocent role of the sterically encumbered 2-transmetalated 3-alkylthiophene monomer, we introduce the treatment of hygroscopic monomers with a bulky Grignard compound as a water-scavenger for the improved synthesis of water-soluble conjugated polymers. For challenging electron-deficient monomers, we discuss the design of new Ni(II)diimine catalysts with electron-donating character which enhance the stability of the association complex between the catalyst and the growing polymer chain, resulting in the quasi-living synthesis of n-type polymers. Beyond n-type homopolymers, the Ni(II)diimine catalysts are also capable of producing electron-rich and electron-deficient diblock and statistical copolymers. We discuss how density functional theory (DFT) calculations elucidate the role of catalyst steric and electronic effects in controlling the synthesis of π-conjugated polymers. Moreover, we demonstrate the synthesis of monodisperse high oligomers by temperature cycling, which takes full advantage of the unique character of KCTP in that it proceeds through distinct intermediates that are not reactive. The insight we gained thus far leads to the first example of isolated living conjugated polymer chains prepared by a standard KCTP procedure, with general applicability to different monomers and catalytic systems. In summarizing a decade of innovation in KCTP, we hope this Account will inspire future development in the field to overcome key challenges including the controlled synthesis of electron-deficient heterocycles, complex and high-performance systems, and degradable and recyclable materials as well as cutting-edge catalyst design.

Improving the Kumada Catalyst Transfer Polymerization with Water-Scavenging Grignard Reagents

Conjugated polymers have received widespread interest as optoelectronic materials. Recently, these macromolecules have been adopted for biologically relevant applications, such as sensors, imaging agents, and drug delivery vectors. A major limitation of the chemistry used to prepare these classes of compounds is that the resultant polymers themselves are not tolerant to water or are not inherently water-soluble. For example, the most controlled method of conjugated polymer synthesis, the Kumada catalyst transfer polymerization (KCTP), requires stringent drying of monomers, catalysts, and other reagents. Here, we describe an approach to use a water-scavenging Grignard reagent to alleviate many of the shortcomings that currently hinder the synthesis of water-soluble conjugated polymers. This method shows improved polymerization performance in both traditional conjugated polymer synthesis as well as more challenging syntheses of polar hygroscopic polymers that are of interest for biological applications.

Isolation of Living Conjugated Polymer Chains

Living polymerizations currently play a central role in polymer chemistry. However, one feature of these polymerizations is often overlooked, namely, the isolation of living polymer chains. Herein we report the isolation of living π-conjugated polymer chains, synthesized by catalyst-transfer polycondensation. Successful preservation of the nickel complex at polymer chain ends is evidenced by nuclear magnetic resonance spectroscopy, end group analysis, and chain extension experiments. When characterizing living chains by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, we discovered a unique photoionization-photodissociation fragmentation process for polymers containing a nickel phosphine end group. Living chains are isolated for several types of conjugated polymers as well as discrete living oligomers. Additionally, we are able to recycle the catalysts from the isolated polymer chains. Catalyst recycling after π-conjugated polymerization has previously been impossible without chain isolation. This strategy not only exhibits general applicability to different monomers but also has far-reaching potential for other catalytic systems.