Engineering in Vivo Production of α-Branched Polyesters

Microcrystalline cellulose grafted hyperbranched polyester with roll comb structure for synergistic toughening and strengthening of microbial PHBV/bio-based polyester elastomer composites

The brittle feature of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is the major challenge that strongly restricts its application at present. Successfully synthesized bio-based engineering polyester elastomers (BEPE) were combined with PHBV to create entirely bio-composites with the intention of toughening PHBV. Herein, the 2,2-Bis(hydroxymethyl)-propionic acid (DMPA) was grafted onto microcrystalline cellulose (MCC) and then further transformed into hyperbranched polyester structure via polycondensation. The modified MCC, named MCHBP, had plenty of terminal hydroxyl groups, which get dispersed between PHBV and BEPE. Besides, a large number of terminal hydroxyl groups of MCHBP can interact with the carbonyl groups of PHBV or BEPE in a wide range of hydrogen bonds, and subsequently increase the adhesion and stress transfer between the PHBV and BEPE. The tensile toughness and the elongation at break of the PHBV/BEPE composites with 0.5phr MCHBP were improved by 559.7 % and 221.8 % in comparison to those of PHBV/BEPE composites. Results also showed that MCHBP can play a heterogeneous nucleation effect on the crystallization of PHBV. Therefore, this research can address the current issue of biopolymers' weak mechanical qualities and may have uses in food packaging.

Nature-inspired methylated polyhydroxybutyrates from C1 and C4 feedstocks

Polyolefin plastics are widely used due to their low cost and outstanding properties, but their environmental persistence presents a major societal challenge. Polyhydroxyalkanoates (PHA) are biodegradable substitutes for polyolefins, but their high cost and thermal instability are impediments to their widespread application. Here we report a series of methylated polyhydroxybutyrates, poly(3-hydroxy-2-methylbutyrate)s, which are structurally inspired by natural PHAs. The cis homopolymers exhibit tacticity-independent crystallinity, which allows for the discovery of high-melting, thermally stable and mechanically tough copolymers, and a full range of polyolefin-like properties can be further achieved by tailoring the cis/trans ratio of the repeating units. Moreover, these materials can be synthesized from inexpensive carbon monoxide and 2-butene feedstocks, and they can be chemically recycled or upcycled at their end of life. The versatile properties, abundant feedstocks and end-of-life utility of this family of polyesters will enable a powerful platform for the discovery of sustainable alternatives to polyolefin plastics.

Engineering polyester monomer diversity through novel pathway design

Polyesters composed of hydroxy acids (HAs) and diols serve many material niches and are invaluable to our daily lives. However, their traditional synthesis from petrochemicals creates many environmental concerns. Metabolically engineered microorganisms have been leveraged for the industrially competitive production of a few polyesters with properties that limit their application. Designing new metabolic pathways to polyester building blocks is essential to broadening material property diversity and improving carbon and energy usage of current bioproduction schemes. This review focuses on recently developed pathways to HAs and diols. Specifically, new pathways to 2,3- and ω-Hydroxy acids, as well as C3-C4 and medium-chain-length diols, are discussed. Pathways to the same compound are compared on the basis of criteria such as energy usage, number of pathway steps, and titer. Finally, suggestions for improvements and next steps for each pathway are also discussed.

Engineering site-selective incorporation of fluorine into polyketides

Although natural products and synthetic small molecules both serve important medicinal functions, their structures and chemical properties are relatively distinct. To expand the molecular diversity available for drug discovery, one strategy is to blend the effective attributes of synthetic and natural molecules. A key feature found in synthetic compounds that is rare in nature is the use of fluorine to tune drug behavior. We now report a method to site-selectively incorporate fluorine into complex structures to produce regioselectively fluorinated full-length polyketides. We engineered a fluorine-selective trans-acyltransferase to produce site-selectively fluorinated erythromycin precursors in vitro. We further demonstrated that these analogs could be produced in vivo in Escherichia coli on engineering of the fluorinated extender unit pool. By using engineered microbes, elaborate fluorinated compounds can be produced by fermentation, offering the potential for expanding the identification and development of bioactive fluorinated small molecules.

Reverse β-oxidation pathways for efficient chemical production

Microbial production of fuels, chemicals, and materials has the potential to reduce greenhouse gas emissions and contribute to a sustainable bioeconomy. While synthetic biology allows readjusting of native metabolic pathways for the synthesis of desired products, often these native pathways do not support maximum efficiency and are affected by complex regulatory mechanisms. A synthetic or engineered pathway that allows modular synthesis of versatile bioproducts with minimal enzyme requirement and regulation while achieving high carbon and energy efficiency could be an alternative solution to address these issues. The reverse β-oxidation (rBOX) pathways enable iterative non-decarboxylative elongation of carbon molecules of varying chain lengths and functional groups with only four core enzymes and no ATP requirement. Here, we describe recent developments in rBOX pathway engineering to produce alcohols and carboxylic acids with diverse functional groups, along with other commercially important molecules such as polyketides. We discuss the application of rBOX beyond the pathway itself by its interfacing with various carbon-utilization pathways and deployment in different organisms, which allows feedstock diversification from sugars to glycerol, carbon dioxide, methane, and other substrates.

Natural products from mangrove sediments-derived microbes: Structural diversity, bioactivities, biosynthesis, and total synthesis

The mangrove forests are a complex ecosystem, and the microbial communities in mangrove sediments play a critical role in the biogeochemical cycles of mangrove ecosystems. Mangrove sediments-derived microbes (MSM), as a rich reservoir of natural product diversity, could be utilized in the exploration of new antibiotics or drugs. To understand the structural diversity and bioactivities of the metabolites of MSM, this review for the first time provides a comprehensive overview of 519 natural products isolated from MSM with their bioactivities, up to 2021. Most of the structural types of these compounds are alkaloids, lactones, xanthones, quinones, terpenoids, and steroids. Among them, 210 compounds are obtained from bacteria, most of which are from Streptomyces, while 309 compounds are from fungus, especially genus Aspergillus and Penicillium. The pharmacological mechanisms of some representative lead compounds are well studied, revealing that they have important medicinal potentials, such as piericidins with anti-renal cell cancer effects, azalomycins with anti-MRSA activities, and ophiobolins as antineoplastic agents. The biosynthetic pathways of representative natural products from MSM have also been summarized, especially ikarugamycin, piericidins, divergolides, and azalomycins. In addition, the total synthetic strategies of representative secondary metabolites from MSM are also reviewed, such as piericidin A and borrelidin. This review provides an important reference for the research status of natural products isolated from MSM and the lead compounds worthy of further development, and reveals that MSM have important medicinal values and are worthy of further development.

Diamine Biosynthesis: Research Progress and Application Prospects

Diamines are important monomers for polyamide plastics; they include 1,3-diaminopropane, 1,4-diaminobutane, 1,5-diaminopentane, and 1,6-diaminohexane, among others. With increasing attention on environmental problems and green sustainable development, utilizing renewable raw materials for the synthesis of diamines is crucial for the establishment of a sustainable plastics industry. Recently, high-performance microbial factories, such as Escherichia coli and Corynebacterium glutamicum, have been widely used in the production of diamines. In particular, several synthetic pathways of 1,6-diaminohexane have been proposed based on glutamate or adipic acid. Here, we reviewed approaches for the biosynthesis of diamines, including metabolic engineering and biocatalysis, and the application of bio-based diamines in nylon materials. The related challenges and opportunities in the development of renewable bio-based diamines and nylon materials are also discussed.

Poly(3-hydroxybutyrate-3-hydroxyvalerate) production from pretreated waste lignocellulosic hydrolysates and acetate co-substrate

The purpose of this study was to explore the potential of producing Poly(3-hydroxybutyrate-3-hydroxyvalerate) (PHBV) by mixed microbial culture (MMC) with lignocellulosic hydrolysates and acetate co-substrate as feedstock. The addition of co-substrate acetate led to the introduction of HV monomer into the polyhydroxyalkanoate (PHA), and the initial mixed sludge suspension (MLSS) increased with the increase of acetate. Almost 1.91-fold increase in the yield of PHA was achieved with limited nitrogen medium (the carbon to nitrogen ratio (C/N) was 33) compared to the normal nitrogen medium (C/N = 20). Limiting nitrogen source and micro alkaline culture environment was more conducive to the accumulation of PHBV. PHA production achieved to the highest value of about 2308.45 mg/L under the condition of optimized technology. Acidovorax was the dominant genus of all bioreactors using co-substrate. Further, utilizing lignocellulosic hydrolysate and acetate co-substrate as feedstock in mixed microbial culture was a promising approach in a low-cost large-scale PHA production.