Electrochemical Synthesis of Hindered Primary and Secondary Amines via Proton-Coupled Electron Transfer

Electrochemical Synthesis of C(sp3)-Rich Amines by Aminative Carbofunctionalization of Carbonyl Compounds

Alkylamines form the backbone of countless nitrogen-containing small molecules possessing desirable biological properties. Despite advances in amine synthesis through transition metal catalysis and photoredox chemistry, multicomponent reactions that leverage inexpensive materials to transform abundant chemical feedstocks into three-dimensional α-substituted alkylamines bearing complex substitution patterns remain scarce. Here, we report the design of a catalyst-free electroreductive manifold that merges amines, carbonyl compounds and carbon-based radical acceptors under ambient conditions without rigorous exclusion of air and moisture. Key to this aminative carbofunctionalization process is the chemoselective generation of nucleophilic α-amino radical intermediates that readily couple with electrophilic partners, providing straightforward access to architecturally intricate alkylamines and drug-like scaffolds which are inaccessible by conventional means.

A Disconnection for Rapid Access to Heterocyclic Benzylic Amines with Fully Substituted α-Carbons

2- or 4-Pyridyl benzylic amines represent a privileged motif in drug discovery. However, the formation of heterocyclic benzylic amines with fully substituted α-carbons can require the execution of lengthy synthetic routes, which limit their application. Addition of various nucleophilic agents to Ellman's imines has been well established; however, there is no precedented literature reported for pyridyl-type nucleophiles, which are very important for medicinal chemistry. In this letter, we disclose the development of a one-step synthesis of heterocyclic benzylic amines with fully substituted α-carbons from heteroaryl halides and sulfinyl imines. Starting from 2,4-dibromopyridine, regioselective synthesis of 2- or 4-pyridyl benzylic amines could be achieved by choosing toluene or MTBE as a solvent.

Transition-Metal-Free, Reductive Csp2-Csp3 Bond Constructions via Electrochemically Induced Alkyl Radicals

Construction of the Csp2-Csp3 bond without the aid of transition metal catalysts has been achieved by coupling the electrogenerated alkyl radicals with electron deficient (hetero)arenes in an undivided cell. Simultaneous cathodic reduction of both unactivated alkyl halides and cyanobenzenes under high potential enables radical-radical cross-coupling to deliver alkylarenes in the absence of transition metals. Depending on the coupling partner, the electrogenerated alkyl radicals can also proceed the Minisci-type reaction with N-heteroarenes without redox agents.

Cathodically Coupled Electrolysis to Access Biheteroaryls

An electrochemical approach to biheteroaryls through the coupling of diverse N-heteroarenes with heteroaryl phosphonium salts is reported. The reaction features pH and redox-neutral conditions and excellent regioselectivity, as well as exogenous air or moisture tolerance. Additionally, a one-pot, two-step protocol can be established to realize formal C-H/C-H coupling of heteroarenes, thereby greatly expanding the substrate availability. The utility of this method is demonstrated through late-stage functionalization, the total synthesis of nitraridine, and antifungal activity studies.

Direct C(sp3)-H Arylation of Unprotected Benzyl Anilines and Alkylarenes by Organocatalysis under Visible Light

Reported herein is direct C(sp3)-H arylation of unprotected benzyl anilines and alkylarenes via consecutive photoinduced electron transfer by visible light irradiation. Reductive quenching cycles and radical-radical cross-coupling were involved, and electron paramagnetic resonance experiments provide evidence for the formation of radical intermediates formed in situ. The protocol highlights transition metal free, external oxidant free, broad substrate scope, and high efficiency (>60 examples, up to 96%).

Electrochemically Driven C4-Selective Decyanoalkylation of Cyanopyridines with Unactivated Alkyl Bromides Enabling C(sp3)-C(sp2) Coupling

With cyanopyridines and alkyl bromides as coupling partners, an electrochemically driven C4-selective decyanoalkylation has been established to access diverse 4-alkylpyridines in one step. The reaction proceeds through the single electron reduction/radical-radical coupling tandem process under mild electrolytic conditions, achieving the cleavage of the C(sp2)-CN bond and the formation of C(sp3)-C(sp2). The practicality of this protocol is illustrated by no sacrificial anodes, a broad substrate scope, and gram-scale synthesis.

Scandium-Catalyzed Electrochemical Synthesis of α-Pyridinyl Tertiary Amino Acids and Esters

α-Pyridyl tertiary amino acids have potential pharmaceutical applications because of their structural features. However, their synthesis is still highly limited. Herein, we report a straightforward approach for the electrochemical synthesis of tertiary α-substituted amino acid derivatives via three-component reductive coupling. Using gaseous ammonia as both the N and H source, the α-keto ester reacts directly with 4-CN-pyridine. The application of scandium catalysis is the key for achieving chemoselectivity among various side reaction pathways.

Dehalogenative Arylation of Unactivated Alkyl Halides via Electroreduction

Herein, a facile and efficient dehalogenative arylation of unactivated alkyl halides enabled by electrochemical reductive coupling is developed, affording a series of C(sp2)-C(sp3) products in moderate to good yields. This protocol proceeds in the absence of transition metal catalysts and redox mediators. The reaction features mild conditions, broad substrate scope, and high tolerance of functional groups and is demonstrated to be applicable for gram-scale synthesis and late-stage functionalization of natural products.

α-Tertiary Primary Amine Synthesis via Photocatalytic C(sp3)-H Aminoalkylation

Facile access to sterically hindered α-tertiary primary amines via photocatalytic radical coupling of native C(sp3)-H substrates with N-unsubstituted ketimines is reported. LiBr was used as a hydrogen atom transfer reagent to cleave C(sp3)-H bonds to get alkyl radicals. The in situ-generated HBr can then serve as a Bronsted acid to activate N-unsubstituted ketimines readily for single-electron reduction to deliver α-amino radicals. As a consequence, radical-radical coupling affords primary amines with a congested α-tertiary substituent. This reaction is highlighted by simple and mild conditions, 100% atom-economy, and broad hydrocarbon substrate scope for benzyl ethers, cyclic ethers, benzyl alcohols, alkylarenes, and carbocycles.

Deep Electroreductive Chemistry: Harnessing Carbon- and Silicon-based Reactive Intermediates in Organic Synthesis

This Viewpoint outlines our recent contribution in electroreductive synthesis. Specifically, we leveraged deeply reducing potentials provided by electrochemistry to generate radical and anionic intermediates from readily available alkyl halides and chlorosilanes. Harnessing the distinct reactivities of radicals and anions, we have achieved several challenging transformations to construct C-C, C-Si, and Si-Si bonds. We highlight the mechanistic design principle that underpinned the development of each transformation and provide a view forward on future opportunities in growing area of reductive electrosynthesis.

Photoredox-Nickel Dual-Catalyzed C-Alkylation of Secondary Nitroalkanes: Access to Sterically Hindered α-Tertiary Amines

The preparation of tertiary nitroalkanes via the nickel-catalyzed alkylation of secondary nitroalkanes using aliphatic iodides is reported. Previously, catalytic access to this important class of nitroalkanes via alkylation has not been possible due to the inability of catalysts to overcome the steric demands of the products. However, we have now found that the use of a nickel catalyst in combination with a photoredox catalyst and light leads to much more active alkylation catalysts. These can now access tertiary nitroalkanes. The conditions are scalable as well as air and moisture tolerant. Importantly, reduction of the tertiary nitroalkane products allows rapid access to α-tertiary amines.

Electroreductively Induced Radicals for Organic Synthesis

Organic electrochemistry has attracted tremendous interest within the novel sustainable methodologies that have not only reduced the undesired byproducts, but also utilized cleaner and renewable energy sources. Particularly, oxidative electrochemistry has gained major attention. On the contrary, reductive electrolysis remains an underexplored research direction. In this context, we discuss advances in transition-metal-free cathodically generated radicals for selective organic transformations since 2016. We highlight the electroreductive reaction of alkyl radicals, aryl radicals, acyl radicals, silyl radicals, fluorosulfonyl radicals and trifluoromethoxyl radicals.

Cobalt-electrocatalytic C-H hydroxyalkylation of N-heteroarenes with trifluoromethyl ketones

Trifluoromethyl carbinols and N-heteroarenes are both prevalent in bioactive molecules. However, access to high-value pharmacophores combining these two functional groups still remains a challenge. Herein, we report an electro-chemical redox-neutral coupling for the synthesis of N-heteroaryl trifluoromethyl carbinols from readily available N-heteroarenes and trifluoromethyl ketones. The reaction starts with reversing the polarity of ketones to nucleophilic ketyl radicals through an electrocatalytic proton-coupled electron transfer (PCET), followed by radical addition to heteroarenes and rearomatization to afford tertiary alcohol products. Importantly, the merging of paired electrolysis and cobalt catalysis is crucial to this regioselective C-H hydroxyalkylation of heteroarenes, and thus avoids several known competing pathways including the spin-center shift (SCS) process. Collectively, this protocol provides straightforward access to heteroaryl trifluoromethyl carbinols, featuring ideal atom economy, excellent regioselectivity, and paired redox-neutral electrolysis.

Palladium-catalyzed asymmetric allylic 4-pyridinylation via electroreductive substitution reaction

The enantioselective pyridinylation is important for providing chiral compounds bearing heterocycles of pharmaceutical interests. 4-CN-pyrinde is extensively applied in the radical pyridinylation reaction, however, its’ enantioselective application is highly challenging. To achieve this goal, we propose an electrochemical catalytic activation of 4-CN-pyridine with a chiral transition metal complex instead of direct cathodic reduction. The chiral catalyst acts as the electron mediator and the transition metal catalysis in turn. The radical species from 4-CN-pyridine is captured via radical rebound by chiral catalyst, and undergoes enantioselective pyridinylation reaction. Here, we show the first method for catalytic asymmetric allylic 4-pyridinylation reactions using 4-CN-pyridine under electrochemical conditions.

Controlling the enantioselectivity of radical reactions is a persistent challenge in organic synthesis. Here, the authors report a method to form asymmetric pyridine derivatives via the combination of chiral palladium catalysis and electrochemistry.

Direct Reductive Arylation of Imines with Electron-Deficient (Hetero) Arenes via Electrosynthesis to Access Benzylic Amines

In this paper, a direct access to benzylic amines from imines and electron-deficient (hetero) arenes via electrochemical radical-radical cross-coupling is described. The reaction has the characteristics of the wide range of substrates, excellent functional group tolerance, metal-free and highly atom-economical. The insensitivity to air and moisture makes this synthetic strategy more efficient for the construction of various benzylic amine derivatives.

Paired Electrolysis for Decarboxylative Cyanation: 4-CN-Pyridine, a Versatile Nitrile Source

A decarboxylative cyanation of amino acids under paired electrochemical reaction conditions has been developed. 4-CN-pyridine was found to be a new and effective cyanation reagent under catalyst-free conditions. Mechanistic studies support a nucleophilic reaction pathway, and the cyanation protocol can be applied to diverse substrates including N,N-dialkyl aniline and indole derivatives.

Cascade of C(sp2)-H Addition to Carbonyl and C(sp2)-CN/C(sp2)-H Coupling Enabled by Brønsted Acid: Construction of Benzo[a]carbazole Frameworks

Herein, we report an unprecedented cascade reaction of C(sp²)-H addition to carbonyl and the C(sp²)-CN/C(sp²)-H coupling of 2-(2-oxo-2-arylethyl)benzonitriles with indoles enabled by commercially available TsOH·H₂O. The protocol represents the first metal-free C(sp²)-CN/C(sp²)-H coupling, affording a new route for the synthesis of various benzo[a]carbazole derivatives with a broad substrate scope, high yields, and simple conditions.

Electrochemical ammonium-cation-assisted pyridylation of inert N-heterocycles via dual-proton-coupled electron transfer

A straightforward and practical strategy for pyridylation of inert N-heterocycles, enabled by ammonium cation and electrochemical, has been described. This protocol gives access to various N-fused heterocycles and bidentate nitrogen ligand compounds, through dual-proton-coupled electron transfer (PCET) and radical cross-coupling in the absence of exogenous metal and redox reagent. It features broad substrate scope, wide functional group tolerance, and easy gram-scale synthesis. Various experiments and density functional theory (DFT) calculation results show the mechanism of dual PCET followed by radical cross-coupling is the preferred pathway. Moreover, ammonium salt plays the dual role of protonation reagent and electrolyte in this conversion, and the resulting product 9-(pyridin-4-yl)acridine compound can be used for fluorescence recognition of Fe²⁺ and Pd²⁺ with high sensitivity.

•

Electrochemical NH₄⁺-assisted dual PCET followed by the radical cross-coupling

•

Straightforward and practical synthetic route for N-fused heterocycles

•

Fluorescence recognition of Fe²⁺ and Pd²⁺ with high-sensitivity

Recent Advances in C(sp3)-C(sp3) and C(sp3)-C(sp2) Bond Formation through Cathodic Reactions: Reductive and Convergent Paired Electrolyses

The formation of C(sp³)-C(sp³) and C(sp³)-C(sp²) bonds is one of the major research goals of synthetic chemists. Electrochemistry is commonly considered to be an appealing means to drive redox reactions in a safe and sustainable fashion and has been utilized for C-C bond-forming reactions. Compared to anodic oxidative methods, which have been extensively explored, cathodic processes are much less investigated, whereas it can pave the way to alternative retrosynthetic disconnections of target molecules and to the discovery of new transformations. This review provides an overview on the recent achievements in the construction of C(sp³)-C(sp³) and C(sp³)-C(sp²) bonds via cathodic reactions since 2017. It includes electrochemical reductions and convergent paired electrolyses.

Hydropyridylation of α,β-Unsaturated Esters through Electroreduction of 4-Cyanopyridine

A mild and highly efficient method for the hydropyridylation of α,β-unsaturated esters has been developed. This protocol provides the products smoothly with a wide substrate scope in an undivided cell under ambient conditions. Moreover, studies showed that the scope could be extended to other unsaturated compounds, including enones and aldehydes.

Photons or Electrons? A Critical Comparison of Electrochemistry and Photoredox Catalysis for Organic Synthesis

Redox processes are at the heart of synthetic methods that rely on either electrochemistry or photoredox catalysis, but how do electrochemistry and photoredox catalysis compare? Both approaches provide access to high energy intermediates (e.g., radicals) that enable bond formations not constrained by the rules of ionic or 2 electron (e) mechanisms. Instead, they enable 1e mechanisms capable of bypassing electronic or steric limitations and protecting group requirements, thus enabling synthetic chemists to disconnect molecules in new and different ways. However, while providing access to similar intermediates, electrochemistry and photoredox catalysis differ in several physical chemistry principles. Understanding those differences can be key to designing new transformations and forging new bond disconnections. This review aims to highlight these differences and similarities between electrochemistry and photoredox catalysis by comparing their underlying physical chemistry principles and describing their impact on electrochemical and photochemical methods.

Photochemical and Electrochemical Applications of Proton-Coupled Electron Transfer in Organic Synthesis

We present here a review of the photochemical and electrochemical applications of multi-site proton-coupled electron transfer (MS-PCET) in organic synthesis. MS-PCETs are redox mechanisms in which both an electron and a proton are exchanged together, often in a concerted elementary step. As such, MS-PCET can function as a non-classical mechanism for homolytic bond activation, providing opportunities to generate synthetically useful free radical intermediates directly from a wide variety of common organic functional groups. We present an introduction to MS-PCET and a practitioner's guide to reaction design, with an emphasis on the unique energetic and selectivity features that are characteristic of this reaction class. We then present chapters on oxidative N-H, O-H, S-H, and C-H bond homolysis methods, for the generation of the corresponding neutral radical species. Then, chapters for reductive PCET activations involving carbonyl, imine, other X═Y π-systems, and heteroarenes, where neutral ketyl, α-amino, and heteroarene-derived radicals can be generated. Finally, we present chapters on the applications of MS-PCET in asymmetric catalysis and in materials and device applications. Within each chapter, we subdivide by the functional group undergoing homolysis, and thereafter by the type of transformation being promoted. Methods published prior to the end of December 2020 are presented.

Synthesis of carbinoxamine via α-C(sp3)–H 2-pyridylation of O, S or N-containing compounds enabled by non-D–A-type super organoreductants and sulfoxide- or sulfide HAT reagents

The radical cations of tertiary amines (R₃N) have been well-established as the precursors of HAT reagents in photochemical transformations. Similarly, thiols and thioacids bearing SH groups have also been widely applied as HAT reagents. Despite the fact that sulfoxides (R₂SO) and sulfides (RSR) also bear lone pairs of electrons, these compounds have been barely reported as HAT reagents in photocatalysis. On the other hand, the α-C–H 4-pyridylation of O or N-containing compounds has been documented, whereas 2-pyridylation remains challenging. However, the antihistamine and anticholinergic agent carbinoxamine is an ether bearing 2-pyridyl, which has not been obtained by the existing α-photoarylation of ether. In this work, we report the discovery of a non-donor–acceptor (D–A) type organic photoreductant CBZ6 and sulfoxide/sulfide synergistically catalyzed general α-C(sp³)–H arylation of ethers, thioethers and amines. By using as low as 1 mol% of CBZ6 as a recyclable organic photoreductant and sulfoxides or sulfides as a new type of HAT reagent, the 2- or 4-pyridylation of O, N, or S-containing compounds has been accomplished. This is the first base-free version of α-C–H 2-/4-pyridylation of O, N, or S-containing compounds. It is the first example of sulfoxides or sulfides working as HAT reagents. It is also the first general method for photocatalytic HAT 2-pyridylation of various ethers, amines or thioethers.

We report the discovery of a non-donor–acceptor (D–A) type organic photoreductant CBZ6 and sulfoxide/sulfide synergistically catalyzed general α-C(sp³)–H arylation of ethers, thioethers and amines.

Electroreductive 4-pyridylation of unsaturated compounds using gaseous ammonia as a hydrogen source

By using ammonia as a hydrogen source, electrochemical pyridylation of unsaturated compounds is achieved with more than 50 examples. In particular, the β-keto ester could be converted to the corresponding tertiary β-hydroxyl ester for the first time.

Regioselective Umpolung Addition of Dicyanobenzene to α,β-Unsaturated Alkenes Enabled by Electrochemical Reduction

An umpolung addition of dicyanobenzene to α,β-unsaturated alkenes has been developed with an electroreductive strategy. This electrochemical protocol is well compatible with broad range of conventionally challenging substrates, including α,β-unsaturated...

Recent advances in the electrochemical reactions of nitrogen-containing organic compounds

The electrochemical reaction of amines, nitriles, amides, nitroaromatics, and imines has been proven to be a valuable method for the synthesis of various nitrogen-containing organic compounds.

Iterative addition of carbon nucleophiles to N,N-dialkyl carboxamides for synthesis of α-tertiary amines

A protocol for the synthesis of α-tertiary amines was developed by iterative addition of carbon nucleophiles to N,N-dialkyl carboxamides. Nucleophilic 1,2-addition of organolithium reagents to carboxamides forms anionic tetrahedral carbinolamine (hemiaminal) intermediates, which are subsequently treated with bromotrimethylsilane (Me₃SiBr) followed by organomagnesium (Grignard) reagents, organolithium reagents or tetrabutylammonium cyanide, affording α-tertiary amines. Employment of (trimethylsilyl)methylmagnesium bromide as the 2^nd nucleophile allowed for aza-Peterson olefination of the resulting α-tertiary (trimethylsilyl)methylamines with acidic work-up, resulting in the formation of 1,1-diarylethylenes.

Electrochemical Oxo-Fluorosulfonylation of Alkynes under Air: Facile Access to β-Keto Sulfonyl Fluorides

Radical fluorosulfonylation is emerging as an appealing approach for the synthesis of sulfonyl fluorides, which have widespread applications in many fields, in particular in the context of chemical biology and drug development. Here, we report the first investigation of FSO₂ radical generation under electrochemical conditions, and the establishment of a new and facile approach for the synthesis of β-keto sulfonyl fluorides via oxo-fluorosulfonylation of alkynes with sulfuryl chlorofluoride as the radical precursor and air as the oxidant. This electrochemical protocol is amenable to access two different products (β-keto sulfonyl fluorides or α-chloro-β-keto sulfonyl fluorides) with the same reactants. The β-keto sulfonyl fluoride products can be utilized as useful building blocks in the synthesis of various derivatives and heterocycles, including the first synthesis of an oxathiazole dioxide compound. Furthermore, some β-keto sulfonyl fluorides and derivatives exhibited notably potent activities against Bursaphelenchus xylophilus and Colletotrichum gloeosporioides.

Photocatalytic Hydroaminoalkylation of Styrenes with Unprotected Primary Alkylamines

Catalytic, intermolecular hydroaminoalkylation (HAA) of styrenes provides a powerful disconnection for pharmacologically relevant γ-arylamines, but current methods cannot utilize unprotected primary alkylamines as feedstocks. Metal-catalyzed HAA protocols are also highly sensitive to α-substitution on the amine partner, and no catalytic solutions exist for α-tertiary γ-arylamine synthesis via this approach. We report a solution to these problems using organophotoredox catalysis, enabling a direct, modular, and sustainable preparation of α-(di)substituted γ-arylamines, including challenging electron-neutral and moderately electron-rich aryl groups. A broad range of functionalities are tolerated, and the reactions can be run on multigram scale in continuous flow. The method is applied to a concise, protecting-group-free synthesis of the blockbuster drug Fingolimod, as well as a phosphonate mimic of its in vivo active form (by iterative α-C-H functionalization of ethanolamine). The reaction can also be sequenced with an intramolecular N-arylation to provide a general and modular access to valuable (spirocyclic) 1,2,3,4-tetrahydroquinolines and 1,2,3,4-tetrahydronaphthyridines. Mechanistic and kinetic studies support an irreversible hydrogen atom transfer activation of the alkylamine by the azidyl radical and some contribution from a radical chain. The reaction is photon-limited and exhibits a zero-order dependence on amine, azide, and photocatalyst, with a first-order dependence on styrene.

Unlocking the Potential of High-Throughput Experimentation for Electrochemistry with a Standardized Microscale Reactor

Organic electrochemistry has emerged as an enabling and sustainable technology in modern organic synthesis. Despite the recent renaissance of electrosynthesis, the broad adoption of electrochemistry in the synthetic community, and especially in industrial settings, has been hindered by the lack of general, standardized platforms for high-throughput experimentation (HTE). Herein, we disclose the design of the HTe - Chem, a high-throughput microscale electrochemical reactor that is compatible with existing HTE infrastructure and enables the rapid evaluation of a broad array of electrochemical reaction parameters. Utilizing the HTe - Chem to accelerate reaction optimization, reaction discovery, and chemical library synthesis is illustrated using a suite of oxidative and reductive transformations under constant current, constant voltage, and electrophotochemical conditions.

Pyridylphosphonium salts as alternatives to cyanopyridines in radical-radical coupling reactions

Radical couplings of cyanopyridine radical anions represent a valuable technology for functionalizing pyridines, which are prevalent throughout pharmaceuticals, agrochemicals, and materials. Installing the cyano group, which facilitates the necessary radical anion formation and stabilization, is challenging and limits the use of this chemistry to simple cyanopyridines. We discovered that pyridylphosphonium salts, installed directly and regioselectively from C–H precursors, are useful alternatives to cyanopyridines in radical–radical coupling reactions, expanding the scope of this reaction manifold to complex pyridines. Methods for both alkylation and amination of pyridines mediated by photoredox catalysis are described. Additionally, we demonstrate late-stage functionalization of pharmaceuticals, highlighting an advantage of pyridylphosphonium salts over cyanopyridines.

Cyanopyridines form dearomatized radical anions upon single-electron reduction and participate in photoredox coupling reactions. Pyridylphosphonium salts replicate that reactivity with a broader scope and increase the utility of these processes.

Tunable Electrosynthesis of Anthranilic Acid Derivatives via a C-C Bond Cleavage of Isatins

A facile and direct electrocatalytic C-C bond cleavage/functionalization reaction of isatins was developed. With isatins as the amino-attached C1 sources, a variety of aminobenzoates, and aminobenzamides were synthesized in moderate to good yields under mild conditions.

Exploiting Transient Radical Cations as Brønsted Acids for Allylic C-H Heteroarylation of Enol Silyl Ethers

Intermediary radical cations, generated through single-electron oxidation of enol silyl ethers by excited Ir-based photocatalysts, can be exploited as Brønsted acids for the activation of heteroarylcyanides. This strategy enables the direct allylic C-H heteroarylation of enol silyl ethers under visible-light irradiation.

Mass spectrometric detection of fleeting neutral intermediates generated in electrochemical reactions

Towards the goal of on-line monitoring of transient neutral intermediates during electrochemical reactions, an electrochemistry-neutral reionization-mass spectrometry (EC-NR-MS) technique was developed in this work. The EC-NR setup consisted of a customized EC flow cell, a sonic spray ionization source, a heating tube, an ion deflector and an electrospray ionization source, which were respectively used for the precise control of the electrochemical reaction, solution nebulization, droplet desolvation, ion deflection and neutral intermediate ionization. Based on the EC-NR-MS approach, some long-sought neutral radicals including TPrA˙, DBAE˙ and TEOA˙, which belong to important reductive intermediates in electrochemiluminescence (ECL) reactions, were successfully identified which helps to clarify the previously unproven ECL reaction mechanism. These findings were also supported by spin-trapping experiments and the tandem MS technique. Accordingly, the EC-NR-MS method provides a direct solution for studying complicated electrochemical reactions, especially for detecting short-lived neutral radicals as well as ionic intermediates.

An electrochemistry-neutral reionization-mass spectrometry (EC-NR-MS) technique was developed for on-line studying the long-sought neutral radicals generated in electrochemical reactions.

Ultra-high-throughput SPE-MALDI workflow: Blueprint for efficient purification and screening of peptide libraries

At the forefront of synthetic endeavors in the pharmaceutical industry, including drug discovery and high-throughput screening, timelines are tight and large quantities of pure chemical targets are rarely available. In this regard, the development of novel and increasingly challenging chemistries requires a commensurate level of innovation to develop reliable analytical assays and purification workflows with rapid turnaround that enables accelerated pharmacological evaluation. A small-scale automation platform enabling high-throughput analysis and purification to streamline the selection of candidate leads would be a transformative advance. Herein, we introduce an automation-friendly solid-phase extraction-matrix-assisted laser desorption/ionization (SPE-MALDI) platform applied to the high-throughput purification and analysis of peptide libraries. This advance enabled us to purify peptides from microgram levels in less than a day with results comparable to traditional high-performance liquid chromatography-diode array detection-mass spectrometry (HPLC-DAD-MS).

Electroreductive C3 Pyridylation of Quinoxalin-2(1H)-ones: An Effective Way to Access Bidentate Nitrogen Ligands

The construction of functional N-containing active biomolecules and bidentate nitrogen ligands by electroreductive pyridylation of N-heteroaromatics is an eye-catching task and challenge. A simple and practical electroreductive-induced C3 pyridylation of quinoxalin-2(1H)-ones with readily available cyanopyridines is reported. More than 36 examples are supplied, and the reaction performed in >95% yield. The present protocol provides a convenient, efficient, and gram-scale synthesis strategy for a series of new types of potential bidentate nitrogen ligands.