Easy-to-Implement Hydrogen Isotope Exchange for the Labeling of N-Heterocycles, Alkylkamines, Benzylic Scaffolds, and Pharmaceuticals

Au(I)-Catalyzed Regioselective Hydrogen Isotope Labeling of Indoles

The gold(I)-catalyzed hydrogen isotope exchange reaction on indoles and related heterocycles is described under mild conditions and low catalyst loadings, using CD3OD and D2O as readily available deuterium sources. C3-unsubstituted indoles are labeled at the C3 position with exquisite regioselectivity, while C3-substituted indoles are labeled at the C2 position. The method is also applicable to the regioselective tritiation of indoles. Mechanistic studies revealed the involvement of aurated indoles as key intermediates.

Multifunctionalization of Alkenyl Alcohols via a Sequential Relay Process

Aryl-substituted aliphatic amines are widely recognized as immensely valuable molecules. Consequently, the development of practical strategies for the construction of these molecules becomes increasingly urgent and critical. Here, we have successfully achieved multifunctionalization reactions of alkenyl alcohols in a sequential relay process, which enables transformation patterns of arylamination, deuterated arylamination, and methylenated arylamination to the easy access of multifarious arylalkylamines. Notably, a novel functionalization mode for carbonyl groups has been developed to facilitate the processes of deuterium incorporation and methylene introduction, thereby providing new means for the diverse transformations of carbonyl groups. This methodology displays a wide tolerance toward functional groups, while also exhibiting good applicability across various skeletal structures of alkenols and amines.

Highly Chemoselective Synthesis of α, α-Dideuterio Amines by the Reductive Deuteration of Thioamides Using Mild SmI2-D2O

An efficient and chemoselective protocol for the single-electron-transfer (SET) reductive deuteration of thioamides using SmI2 and D2O is reported. This method uniquely produces α,α-dideuterio amines via a thio-ketyl radical intermediate without generating alcohol byproducts, distinguishing it from the SET reduction of amides. The inherent high reactivity of thioamides obviates the need for ligands like Et3N to improve the reducing power of SmI2, thereby enabling milder reaction conditions that are compatible with a broad range of sensitive functional groups. This protocol tolerates both primary and secondary aliphatic and aromatic thioamides, leading to the synthesis of 27 α,α-dideuterio amines and valuable deuterated nitrogen heterocycles with >95% deuterium incorporations.

Site-selective Photoredox-Catalyzed Late-stage Benzylic Hydrogen Isotope Exchange

A highly regioselective visible light photoredox-catalyzed hydrogen isotope exchange (HIE) of benzylic positions in both simple and complex molecules is reported. The process follows a dual catalytic approach using an acridinium photocatalyst in combination with a thiol-based hydrogen atom transfer catalyst, while the use of D2O as an isotope source ensures operational simplicity and cost-effectiveness. High reactivity has been achieved for electron-rich benzylic positions. Moreover, targeted radical formation enables unprecedented selective HIE on intramolecular competing benzylic and alpha to heteroatom positions with moderate to excellent deuterium incorporation. The utility of the reaction was demonstrated on the late-stage HIE of several natural compounds and drug derivatives. Experimental studies and density functional theory (DFT) calculations suggested a single electron transfer (SET) mechanism followed by deprotonation to generate the benzylic radical, and revealed the importance of halogenated solvents or additives. Upon a weak complexation of the halogenated species to the substrate, an oxidation potential lowering effect is induced, as well as a stabilization of the radical-cation species through spin delocalization.

The Development and Application of Tritium-Labeled Compounds in Biomedical Research

With low background radiation, tritiate compounds exclusively emit intense beta particles without structural changes. This makes them a useful tool in the drug discovery arsenal. Thanks to the recent rapid progress in tritium chemistry, the preparation and analysis of tritium-labeled compounds are now much easier, simpler, and cheaper. Pharmacokinetics, autoradiography, and protein binding studies have been much more efficient with the employment of tritium-labeled compounds. This review provides a comprehensive overview of tritium-labeled compounds regarding their properties, synthesis strategies, and applications.

Electrochemical hydrogen isotope exchange of amines controlled by alternating current frequency

Here, we report an electrochemical protocol for hydrogen isotope exchange (HIE) at α-C(sp3)-H amine sites. Tetrahydroisoquinoline and pyrrolidine are selected as two model substrates because of their different proton transfer (PT) and hydrogen atom transfer (HAT) kinetics at the α-C(sp3)-H amine sites, which are utilized to control the HIE reaction outcome at different applied alternating current (AC) frequencies. We found the highest deuterium incorporation for tetrahydroisoquinolines at 0 Hz (i.e., under direct current (DC) electrolysis conditions) and pyrrolidines at 0.5 Hz. Analysis of the product distribution and D isotope incorporation at different frequencies reveals that the HIE of tetrahydroisoquinolines is limited by its slow HAT, whereas the HIE of pyrrolidines is limited by the overoxidation of its α-amino radical intermediates. The AC-frequency-dependent HIE of amines can be potentially used to achieve selective labeling of α-amine sites in one drug molecule, which will significantly impact the pharmaceutical industry.

Ruthenium nanoparticles stabilized by 1,2,3-triazolylidene ligands in the hydrogen isotope exchange of E-H bonds (E = B, Si, Ge, Sn) using deuterium gas

A series of ruthenium nanoparticles (Ru·MIC) stabilized with different mesoionic 1,2,3-triazolylidene (MIC) ligands were prepared by decomposition of the Ru(COD)(COT) (COD = 1,5-cyclooctadiene; COT = 1,3,5-cyclooctatriene) precursor with H2 (3 bar) in the presence of substoichiometric amounts of the stabilizer (0.1-0.2 equiv.). Small and monodisperse nanoparticles exhibiting mean sizes between 1.1 and 1.2 nm were obtained, whose characterization was carried out by means of transmission electron microscopy (TEM), including high resolution TEM (HRTEM), inductively coupled plasma (ICP) analysis and X-ray photoelectron spectroscopy (XPS). In particular, XPS measurements confirmed the presence of MIC ligands on the surfaces of the nanoparticles. The Ru·MIC nanoparticles were used in the isotopic H/D exchange of different hydrosilanes, hydroboranes, hydrogermananes and hydrostannanes using deuterium gas under mild conditions (1.0 mol% Ru, 1 bar D2, 55 °C). Selective labelling of the E-H (E = B, Si, Ge, Sn) bond in these derivatives, with high levels of deuterium incorporation, was observed.

Rapid Enantiomeric Excess Measurements of Enantioisotopomers by Molecular Rotational Resonance Spectroscopy

Recent work in drug discovery has shown that selectively deuterated small molecules can improve the safety and efficacy for active pharmaceutical ingredients. The advantages derive from changes in metabolism resulting from the kinetic isotope effect when deuterium is substituted for a hydrogen atom at a structural position where rate limiting C-H bond breaking occurs. This application has pushed the development of precision deuteration strategies in synthetic chemistry that can install deuterium atoms with high regioselectivity and with stereocontrol. Copper-catalyzed alkene transfer hydrodeuteration chemistry has recently been shown to have high stereoselectivity for deuteration at the metabolically important benzyl C-H position. In this case, stereocontrol results in the creation of enantioisotopomers-molecules that are chiral solely by virtue of the deuterium substitution-and chiral analysis techniques are needed to assess the reaction selectivity. It was recently shown that chiral tag molecular rotational resonance (MRR) spectroscopy provides a routine way to measure the enantiomeric excess and establish the absolute configuration of enantioisotopomers. High-throughput implementations of chiral tag MRR spectroscopy are needed to support optimization of the chemical synthesis. A measurement methodology for high-throughput chiral analysis is demonstrated in this work. The high-throughput ee measurements are performed using cavity-enhanced MRR spectroscopy, which reduces measurement times and sample consumption by more than an order-of-magnitude compared to the previous enantioisotopomer analysis using a broadband MRR spectrometer. It is also shown that transitions for monitoring the enantiomers can be selected from a broadband rotational spectrum without the need for spectroscopic analysis. The general applicability of chiral tag MRR spectroscopy is illustrated by performing chiral analysis on six enantioisotopomer reaction products using a single molecule as the tag for chiral discrimination.

Unprecedented perspectives on the application of CinNapht fluorophores provided by a "late-stage" functionalization strategy

A simple and easy-to-implement process based on a nucleophilic aromatic substitution reaction with a wide variety of nucleophiles on a fluorinated CinNapht is described. This process has the key advantage of introducing multiple functionalities at a very late stage, thus providing access to new applications including the synthesis of photostable and bioconjugatable large Stokes shift red emitting dyes and selective organelle imaging agents, as well as AIEE-based wash-free lipid droplet imaging in live cells with high signal-to-noise ratio. The synthesis of bench-stable CinNapht-F has been optimized and can be reproduced on a large scale, making it an easy-to-store starting material that can be used at will to prepare new molecular imaging tools.

Benzylic deuteration of alkylnitroaromatics via amine-base catalysed exchange with deuterium oxide

This paper describes the deuterium-labelling of alkylnitroaromatics by base-catalysed exchange with deuterium oxide. As the alkyl protons alpha to the aromatic ring are the most acidic sites in the molecule, regioselective hydrogen isotope exchange at this benzylic location leads to a regiospecifically deuterated product. The exchange labelling takes place in good yields and with high atom% abundance in the presence of an appropriate nitrogen base. Alkylated 2,4-dinitrobenzenes deuterate at room temperature under catalysis by triethylamine, whilst alkylated 2-nitro- or 4-nitrobenzenes and related mono-nitroaromatics require higher temperatures and catalysis by 1,5-diazobicyclo[4.3.0]non-5-ene (DBN). The labelling reactions require an inert gas atmosphere, but otherwise are simple and high yielding with no obvious byproducts. Those compounds in which the benzylic protons are in an ortho-orientation with respect to the nitro group label somewhat more slowly than the analogues where there is a para relationship. In addition, higher alkyl homologues undergo benzylic deuteration at slower rates than methyl.

Deuterated Drugs and Biomarkers in the COVID-19 Pandemic

Coronavirus disease 2019 (COVID-19) is a highly contagious disease caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Initially identified in Wuhan (China) in December 2019, COVID-19 rapidly spread globally, resulting in the COVID-19 pandemic. Carriers of the SARS-CoV-2 can experience symptoms ranging from mild to severe (or no symptoms whatsoever). Although vaccination provides extra immunity toward SARS-CoV-2, there has been an urgent need to develop treatments for COVID-19 to alleviate symptoms for carriers of the disease. In seeking a potential treatment, deuterated compounds have played a critical role either as therapeutic agents or as internal MS standards for studying the pharmacological properties of new drugs by quantifying the parent compounds and metabolites. We have identified >70 examples of deuterium-labeled compounds associated with treatment of COVID-19. Of these, we found 9 repurposed drugs and >20 novel drugs studied for potential therapeutic roles along with a total of 38 compounds (drugs, biomarkers, and lipids) explored as internal mass spectrometry standards. This review details the synthetic pathways and modes of action of these compounds (if known), and a brief analysis of each study.