Multiresidue analysis of pesticides in soil by gas chromatography with nitrogen-phosphorus detection and gas chromatography mass spectrometry

Rational design of a dual-mode fluorescent probe for portable detection of pyriproxyfen in the environment and food

The development of a fluorescent probe for pyriproxyfen (PPF) is crucial due to its potential threat to human health. However, the chemical inertness and low solubility of PPF present significant challenges for the detection of PPF in aqueous solutions using fluorescent probes. Herein, we have originally proposed a complex based on 2-(4-(dimethylamino)phenyl)-3-hydroxy-6,7-dimethoxy-4 H-chromen-4-one (HOF) and serum albumin (SA) as a dual-mode fluorescent probe, HOF@SA. This probe utilizes an indicator displacement assay (IDA) to release the dye HOF from the probe at low PPF concentrations (< 10 µM) and embeds the free dye HOF into the micelle of PPF at high concentrations (> 10 µM). This results in dual-mode fluorescent response characteristics for PPF: a turn-off response at low concentrations and a ratiometric response at high concentrations. An investigation of sensing behavior of HOF@SA for PPF detection exhibits rapid response (< 60 s), high sensitivity (LOD ∼4.7 ppb), high selectivity, and excellent visual detection capability (from cyan to yellow). Moreover, with the aid of a portable device, this method enables to analyze PPF in environmental and food samples. These results promote the advancement of a fluorescent probe approach for PPF analysis in environment and food.

Simultaneous multi-residue pesticide analysis in southern Brazilian soil based on chemometric tools and QuEChERS-LC-DAD/FLD method

A simple and straightforward QuEChERS extraction method was proposed for the simultaneous determination of atrazine (ATZ), desethylatrazine (DEA), desisopropylatrazine (DIA), carbaryl (CBL), carbendazim (CBD), and diuron (DIU) in soil with high agricultural activity from southeastern Brazil, using high-performance liquid chromatography-diode-array detection/fluorescence detection. Screening studies carried out by 2⁴ factorial design indicate better recoveries when less sample (1.0 g) and the volume of solvent (2.0 mL of ACN) were applied, compared to the original QuEChERS method. Furthermore, interactions between factors were not negligible in the experimental set, except for ATZ and DIU, in which only water volume influenced their recovery. The influence of the type (primary secondary amine (PSA), C18, and Florisil) and the sorbent amount ratio to the compounds' concentration were also considered. PSA (25 mg) was selected as the best sorbent without losing analytical response. The limits of quantification (LOQ) were estimated to be 5.0 to 15 µg kg^-1 in the soil matrix. Analytical performances were consistent with linearity (R² ≥ 0.998), recovery from 74.7 to 108%, and relative standard deviations (RSD) between 2.6 and 20.2%. Robustness was assessed by fractional factorial Plackett-Burman design. The method is recommended for chemicals that are soluble in water, and it was successfully applied in the analysis of real soil samples containing the analytes in the range of μg kg^-1, proving to be suitable for the study of soils strongly impacted by agricultural activity.

Side effects of traditional pesticides on soil microbial respiration in orchards on the Russian Black Sea coast

Agricultural use of pesticides has greatly increased worldwide over the last several decades, affecting soil microorganisms. Microbial basal respiration and substrate-induced respiration rates are commonly used to assess the detrimental effects of pesticides on soil quality. The goal of the present study was (1) to compare the impact of different pesticides on soil microbial respiration under field conditions, and (2) to characterize the recovery time of soil microbial respiration after pesticide application. The following pesticides were used in the present study: chlorpyrifos, phosalone, dimethoate (organophosphorus insecticides), λ-cyhalothrin (pyrethroid insecticide), and kresoxim-methyl (fungicide). The application of all the pesticides at commercial doses led to a decrease in soil microbial respiration. The inhibition of basal respiration and substrate-induced respiration rate decreased in the following order: chlorpyrifos > phosalone > dimethoate > λ-cyhalothrin ≈ kresoxim-methyl. Among all the pesticides assessed, chlorpyrifos showed the highest toxicity as well as the highest persistence. Several of the observed results differed greatly from previous studies; thus, local assessments are highly advisable. Given that environmental concerns can be a key decision factor for pesticide selection, assessment of different pesticides-such as undertaken in this study-could help farmers to choose the most appropriate pesticide.

Phytoremediation and Bioremediation of Pesticide-Contaminated Soil

Management and destruction of obsolete pesticides and the remediation of pesticide-contaminated soil are significant global issues with importance in agriculture, environmental health and quality of life. Pesticide use and management have a history of problems because of insufficient knowledge of proper planning, storage, and use. This manuscript reviews recent literature with an emphasis on the management of obsolete pesticides and remediation of pesticide-contaminated soil. The rhizosphere of plants is a zone of active remediation. Plants also take up contaminated water and remove pesticides from soil. The beneficial effects of growing plants in pesticide-contaminated soil include pesticide transformation by both plant and microbial enzymes. This review addresses recent advances in the remediation of pesticide-contaminated soil with an emphasis on processes that are simple and can be applied widely in any country.

Distribution of Heavy Metals in the Soils Associated with the Commonly Used Pesticides in Cotton Fields

Agricultural soils contain both heavy metals and pesticides originating from various agricultural practices. It is quite important to study the relationships between these two classes of compounds. To accomplish this, 52 soil samples were collected from cotton fields and analyzed for their metal contents (Ni, Cu, Co, Pb, Cr, and Cd) and levels of most commonly used pesticides (imidacloprid, acetamiprid, and emamectin). FAAS was used for metal estimation and the pesticides were determined by HPLC equipped with UV detector. The results of the study revealed slightly enhanced levels of Ni and Cd in these samples while the rest of the metals were present within tolerable range. Acetamiprid residues in soil were strongly positively correlated with Cu and negatively correlated with Cr. Similarly, imidacloprid in soil was negatively correlated with Ni. Thus it was evidenced that Cu stabilizes acetamiprid while Cr and Ni facilitate the degradation of acetamiprid and imidacloprid in the soil.

Strategies for the multi-residue analysis of 100 pesticides by liquid chromatography-triple quadrupole mass spectrometry

Analytical strategies for screening, quantitation and confirmation of a group of 100 pesticides in fruit and vegetable samples by LC-MS and LC-MS/MS were developed. The pesticides studied belong to different chemical families of herbicides, insecticides and fungicides. A selection of some degradation products was also included. Chromatographic separation was performed using a Zorbax Eclipse XDB-C8 column (150 mm × 4.6 mm and 5 μm particle size), and gradient elution with acetonitrile-water (both with 0.1% formic acid) as mobile phase. LC-MS/MS using highly-selective selected reaction monitoring (H-SRM) acquisition mode monitoring two transitions for each compound showed to be the most sensitive methodology. Quantitation was carried out using matrix-matched standard calibration and good linearity of response was demonstrated (r>0.998). Limits of detection (by acquiring two transitions and with the ion-ratio requirements) ranged between 0.01 and 20 μg/kg were obtained. So, in general, the sensitivity achieved meets the maximum residue levels (MRLs) established by the European Union regulation for food monitoring programs. Pesticide confirmation was carried out following European Union guidelines. In order to prevent false-positives, further confirmatory strategies were proposed. LC-MS in highly-selective selected ion monitoring (H-SIM) mode with accurate mass measurement was used to obtain an orthogonal criterion (exact mass) for confirmation. Accurate mass measurements were always bellow 0.9 mDa for almost all pesticides studied (similar to those described with TOF instruments). A user reversed energy ramp (RER) product ion scan spectra library was generated by means of a data dependent analysis for routine library searching of pesticides. The combination of LC-MS/MS in H-SRM mode and the generation of the RER product ion scan spectra and library search were then used to achieve further confirmation on pesticide analysis. The LC-MS and LC-MS/MS strategies developed were successfully applied for the analysis and confirmation of pesticides in different types of fruit and vegetables samples, and examples of the screening, quantitation and confirmation of pesticides in these samples are shown in this work.

Evaluation of a modified QuEChERS extraction of multiple classes of pesticides from a rice paddy soil by LC-APCI-MS/MS

A new method for the determination of clomazone, fipronil, tebuconazole, propiconazole, and azoxystrobin in samples of rice paddy soil is presented. The extraction of the pesticides from soil samples was performed by using a modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) method. Some extraction conditions such as salt addition, sample acidification, use of buffer, and cleanup step were evaluated. The optimized method dealt with a single extraction of the compounds under study with acidified acetonitrile, followed by the addition of MgSO(4) and NaCl prior to the final determination by liquid chromatography-atmospheric chemical pressure ionization-tandem mass spectrometry. Validation studies were carried out in soil samples. Recoveries of the spiked samples ranged between 70.3 and 120% with relative standard deviation lower than 18.2%. The limits of quantification were between 10 and 50 μg kg(-1). The method was applied to the analysis of real samples of soils where rice is cultivated.

Heterogeneous photocatalytic oxidation of cyprodinil and fludioxonil in leaching water under solar irradiation

The efficiency of ZnO and TiO(2) suspensions in the photocatalytic degradation of two fungicides (cyprodinil and fludioxonil) in leaching water was investigated. The experiments were carried out at pilot plant scale using compound parabolic collectors under natural sunlight. The blank experiments for both irradiated compounds solutions showed that both oxides strongly enhanced the removal of the fungicides. The addition of an oxidant (Na(2)S(2)O(8)) to the ZnO or TiO(2) increased the rate of photooxidation. The degradation of cyprodinil and fludioxonil followed first order kinetics according to the Langmuir-Hinshelwood model. Complete degradation of both fungicides was achieved within 4 h (t(30W)=18 min) when treated with illuminated ZnO. The disappearance time (DT(75)), when referred to the normalized illumination time (t(30W)), was lower than 40 and 550 min (t(30W)=2 and 40 min) for both fungicides using ZnO or TiO(2), respectively. ZnO appeared to be more effective in cyprodinil and fludioxonil oxidation than TiO(2) probably due to its nonstoichiometry.

Rate of loss of insecticides during soil solarization and soil biosolarization

This paper reports the use of solarization and biosolarization to decontaminate a soil polluted with six insecticides (buprofezin, pirimicarb, pirimiphos methyl, pyridaben, pyriproxyfen and tebufenpyrad). In the experiment, 17-L pots filled with clay-loam soil were placed in a greenhouse during the summer season and then contaminated with the insecticides of interest. Treatments consisted of different solarization and biosolarization treatments, including a control without disinfection. For both solarization and biosolarization treatments, low-density polyethylene film was used as cover; the biosolarization treatment involving application of a mixture of sheep and chicken manures at a rate of 400 g pot(-1). Five pots per treatment were sampled periodically up to 90 d after the beginning of each treatment. The results showed that both solarization and biosolarization enhanced the degradation rates of most of the insecticides tested compared with the control, probably as a result of the increased soil temperature. Pirimicarb, pirimiphos methyl, tebufenpyrad, pyriproxyfen and pyridaben were degraded to a greater extent in the biosolarization than in the solarization treatment. The results confirm that both solarization and biosolarization can be considered as a remediation tool for soils polluted by these insecticides.

Solarization and biosolarization enhance fungicide dissipation in the soil

Although there is some evidence regarding the effect of solarization and biosolarization on pesticide degradation, information is still scarce. The aim of this study was to determine the effect of these disinfection techniques on the degradation of eight fungicides (azoxystrobin, kresoxin methyl, tebuconazole, hexaconazole, triadimenol, cyprodinil, pyrimethanil and fludioxonil) commonly used in pepper crops under greenhouse cultivation. Seventy-five 17-L pots filled with clay-loam soil were placed in a greenhouse during the summer season and then contaminated with the studied fungicides. Treatments consisted of different disinfection treatments, including a control without disinfection, solarization and biosolarization. For the solarization and biosolarization treatments, low-density polyethylene film was used as cover. Five pots per treatment were sampled periodically up to 90d after the beginning of each treatment and fungicide residues were analyzed by GC/MS. The results showed that both solarization and biosolarization enhanced fungicide dissipation rates with regard to the control treatment, an effect which was attributed to the increased soil temperature. Most of the fungicides studied showed similar behavior under solarization and biosolarization conditions. However, triadimenol was degraded to a greater extent in the biosolarization than in the solarization treatment, while fludioxonil behaved in the opposite way. The results confirm that both solarization and biosolarization contribute to pesticide dissipation and can therefore be considered alongside other soil disinfection techniques, as a bioremediation tool for pesticide-polluted soils.

Impact of biofumigation with solarization on degradation of pesticides and heavy metal accumulation

A greenhouse study was conducted to evaluate the effect of biofumigation (with sheep and chicken manure) combined with solarization on the dissipation of pesticides (pyrifenox, DDT and dieldrin), and on soil metals accumulation. The treatments consisted of a control, and soil disinfestations by biofumigation combined with solarization (B+S) for two, four, five, six consecutive years. B+S enhanced the dissipation of pyrifenox with regard to control treatment. Significant differences were not detected among plots disinfected with B+S for consecutive years. On the other hand, B+S had no effect on the dissipation of DDT and dieldrin, probably due to the resistance of these pesticides to microbial degradation and/or high temperatures. Biofumigation is considered to be an environmentally safe practice, since no accumulation of heavy metals such as Cd, Co, Cu, Cr, Pb, Ni, or Zn was observed after the subsequent application of organic matter through the treatments.