Quantitative analysis of beta-sitosterol oxides induced in vegetable oils by natural sunlight, artificially generated light, and irradiation

Advances and Challenges in Plant Sterol Research: Fundamentals, Analysis, Applications and Production

Plant sterols (PS) are cholesterol-like terpenoids widely spread in the kingdom Plantae. Being the target of extensive research for more than a century, PS have topped with evidence of having beneficial effects in healthy subjects and applications in food, cosmetic and pharmaceutical industries. However, many gaps in several fields of PS's research still hinder their widespread practical applications. In fact, many of the mechanisms associated with PS supplementation and their health benefits are still not fully elucidated. Furthermore, compared to cholesterol data, many complex PS chemical structures still need to be fully characterized, especially in oxidized PS. On the other hand, PS molecules have also been the focus of structural modifications for applications in diverse areas, including not only the above-mentioned but also in e.g., drug delivery systems or alternative matrixes for functional foods and fats. All the identified drawbacks are also superimposed by the need of new PS sources and technologies for their isolation and purification, taking into account increased environmental and sustainability concerns. Accordingly, current and future trends in PS research warrant discussion.

Liposomal Bilayer as a Carrier of Rosa canina L. Seed Oil: Physicochemical Characterization, Stability, and Biological Potential

Rosa canina L. seeds are rich in bioactive components that can add value to the various formulations. The focus of the study was the development of liposomes for R. canina oil to protect its sensitive compounds and prolong their shelf-life. Oil-loaded liposomes were characterized via the determination of the particle size, polydispersity index (PDI), zeta potential, conductivity, mobility, density, surface tension, viscosity, and stability. Raman and FT-IR spectroscopy were employed to investigate the chemical composition of the non-treated and UV-treated samples, and the presence of different interactions. Antioxidant and antimicrobial activities were examined as well. The liposome size was 970.4 ± 37.4 nm, the PDI 0.438 ± 0.038, the zeta potential -32.9 ± 0.8 mV, the conductivity 0.068 ± 0.002 mS/cm, the mobility -2.58 ± 0.06 µmcm/Vs, the density 0.974 ± 0.004 g/cm³, the surface tension 17.2 ± 1.4 mN/m, and the viscosity 13.5 ± 0.2 mPa•s. The Raman and FT-IR spectra showed the presence of lipids, fatty acids, polyphenols, and carotenoids. It was approved that the oil compounds were distributed inside the phospholipid bilayer and were combined with the membrane interface of the bilayer. The UV irradiation did not cause any chemical changes. However, neither the pure oil nor the oil-loaded liposomes showed any antimicrobial potential, while the antioxidant capacity of the oil-loaded liposomes was significantly low. The sizes of the liposomes did not change significantly during 60 days of storage. Due to the proven stability of the oil-loaded liposomes, as well as the liposome's ability to protect the sensitive oil compounds, their potential application in the pharmaceutical and cosmetic formulations could be investigated with a focus on the skin regeneration effects.

Oxidative stability of UV irradiated and X-rayed soybean oil incorporated with rose oil

The effects of UV radiation and X-ray on the oxidative stability of soybean oil were investigated. Also, rose oil was incorporated into soybean oil and its antioxidant activity was compared with that of α-tocopherol during accelerated storage. Treating the samples with radiation (UV and X-ray) stimulated the oxidation process in soybean oil in comparison with samples that did not receive radiation. X-rayed samples had significantly higher amounts of oxidation products than UV irradiated samples. The X-ray caused more oxidation in the samples due to its higher energy content. Also, the antioxidant activity of rose oil was comparable with that of α-tocopherol.

Impact of electron beam irradiation on quality of sea buckthorn (Hippophae rhamnoides L.) oil

BACKGROUND

Sea buckthorn oil is a valuable product that can be incorporated into daily foodstuffs, cosmetics or pharmaceuticals. The effect of accelerated electron irradiation up to 8 kGy on quality characteristics of sea buckthorn oil was investigated in this study.

RESULTS

Irradiation had no significant influence on phenolic content. Conversely, carotenoid content, antioxidant activity, and oxidative status suffered alterations as the irradiation dose increased. Although no colour changes were visible for oil irradiated up to 3 kGy, the total colour difference indicated clearly changes that involved a two-step pattern associated with slow degradation of oil colour up to 3 kGy, followed by a fast degradation up to 8 kGy. Some changes of the oil spectral features related to the frequency and intensity of some bands have been found after irradiation, indicating an alteration of the structural integrity induced by irradiation.

CONCLUSION

The present investigation may be a useful starting point for irradiation processing of food or non-food matrices containing sea buckthorn oil. Thus, sea buckthorn oil safety can be ensured with minimal undesirable changes in its quality by applying irradiation doses up to 3 kGy, which allow control of the microbial contamination depending on microorganism type and initial microbial load.

Development and validation of methodologies for the quantification of phytosterols and phytosterol oxidation products in cooked and baked food products

Chromatography-mass spectrometry (GC-MS) methodologies for the analysis of the main phytosterols (PS) and phytosterol oxidation products (POPs) present in 19 different foodstuffs cooked or baked using margarines with or without added plant sterols are presented. Various methods for fat extraction were evaluated to allow the GC-MS analysis of large numbers of prepared vegetable, fish and meat products, egg and bakery items in a practically feasible manner. The optimized methods resulted in a good sensitivity and allowed the analysis of both PS and POPs in the broad selection of foods at a wide range of concentrations. Calibration curves for both PS and POPs showed correlation coefficients (R(2)) better than 0.99. Detection limits were below 0.24mgkg(-1) for PS and 0.02mgkg(-1) for POPs, respectively. Average recovery data were between 81% and 105.1% for PS and between 65.5 and 121.8% for POPs. Good results were obtained for within- and between-day repeatability, with most values being below 10%. Entire sample servings were analyzed, avoiding problems with inhomogeneity and making the method an exact representation of the typical use of the food by the consumer.

Development and validation of a gas chromatography-mass spectrometry method for determination of sterol oxidation products in edible oils

An efficient GC-MS method for determination of sterol oxidation product profiles in edible oils was established by combination with optimized silylation, and validated using the standards of sitosterol oxidation products.

Analysis of sitosteryl oleate esters in phytosterols esters enriched foods by HPLC-ESI-MS(2.)

Phytosteryl esters (PE)-enriched spreads are marketed for eating and cooking purposes. Temperature and also light exposure are the major factors leading to the formation of PE oxides in food matrix. In this study a high-speed HPLC-MS(2) method was developed to analyze the major PE present in PE-enriched spreads: sitosteryl oleate (SO) and its oxidation products, by using synthesized compounds as standards. This analytical method was used to quantify seven SO oxides formed in PE-enriched spreads after heating at different temperatures for varying time periods and after prolonged exposure to sunlight. Quantification of remaining native SO was also performed after these different treatments. It was found that under specific heating conditions the decrease of the SO amount was much more important compared to the formation of SO oxides showing that many other products are formed. In contrast to heating, sunlight radiation did not result in the degradation of SO and very few oxides were formed.

Plant sterols from foods in inflammation and risk of cardiovascular disease: a real threat?

High dietary intakes of cholesterol together with sedentary habits have been identified as major contributors to atherosclerosis. The latter has long been considered a cholesterol storage disease; however, today atherosclerosis is considered a more complex disease in which both innate and adaptive immune-inflammatory mechanisms as well as bacteria play a major role, in addition to interactions between the arterial wall and blood components. This scenario has promoted nutritional recommendations to enrich different type of foods with plant sterols (PS) because of their cholesterol-lowering effects. In addition to cholesterol, PS can also be oxidized during food processing or storage, and the oxidized derivatives, known as phytosterol oxidation products (POPs), can make an important contribution to the negative effects of both cholesterol and cholesterol oxidation oxides (COPs) in relation to inflammatory disease onset and the development of atherosclerosis. Most current research efforts have focused on COPs, and evaluations of the particular role and physiopathological implications of specific POPs have been only inferential. Appreciation of the inflammatory role described for both COPs and POPs derived from foods also provides additional reasons for safety studies after long-term consumption of PS. The balance and relevance for health of all these effects deserves further studies in humans. This review summarizes current knowledge about the presence of sterol oxidation products (SOPs) in foods and their potential role in inflammatory process and cardiovascular disease.

Development and validation of a comprehensive two-dimensional gas chromatography-mass spectrometry method for the analysis of phytosterol oxidation products in human plasma

Phytosterol oxidation products (POPs) have been suggested to exert adverse biological effects similar to, although less severe than, their cholesterol counterparts. For that reason, their analysis in human plasma is highly relevant. Comprehensive two-dimensional gas chromatography (GC×GC) coupled with time-of-flight mass spectrometry (TOF-MS) has been proven to be an extremely powerful separation technique for the analysis of very low levels of target compounds in complex mixtures including human plasma. Thus, a GC×GC/TOF-MS method was developed and successfully validated for the simultaneous quantification of ten POPs in human plasma. The calibration curves for each compound showed correlation coefficients (R(2)) better than 0.99. The detection limits were below 0.1 ng mL(-1). The recovery data were between 71.0% and 98.6% (RSDs <10% for all compounds validated). Good results were obtained for within- and between-day repeatability, with most values being below 10%. In addition, non-targeted sterol metabolites were also identified with the method. The concentrations of POPs found in human plasma in the current study are between 0.3 and 4.5 ng mL(-1), i.e., 10-100 times lower than the typical values found for cholesterol oxidation products.

Stability of plant sterols in ingredients used in functional foods

The content of plant sterol (PS) and their oxidation products (POPs) in eight ingredients used to enrich functional foods was studied. A gas chromatographic (GC) technique with mass-spectrometric detection was used for identification, while GC with a flame ionization detector (GC-FID) was used for quantification. β-Sitosterol was the most abundant phytosterol, and the main POPs found were derived from this compound (7α/β-hydroxysitosterol, 7-ketositosterol, and sitostanetriol). The total amount of POPs found in the ingredients ranged from 29.03 to 110.02 μg/100 g PS. The β-sitosterol oxidation rates ranged from 10 to 50 μg β-sitosterol oxides/100 g of β-sitosterol. In view of this low rate of oxidation in the ingredients tested, it can be concluded that the PS remain stable in these ingredients. Significant correlations (p < 0.01) were found between total oxysitosterols versus β-sitosterol contents (R(2) = 86.5%) and between total POPs and total PS (R(2) = 81.6%).

Oxysterols: A world to explore

Oxysterols (oxidized derivatives of cholesterol and phytosterols) can be generated in the human organism through different oxidation processes, some requiring enzymes. Furthermore, oxysterols are also present in food due to lipid oxidation reactions caused by heating treatments, contact with oxygen, exposure to sunlight, etc., and they could be absorbed from the diet, at different rates depending on their side chain length. In the organism, oxysterols can follow different routes: secreted into the intestinal lumen, esterified and distributed by lipoproteins to different tissues or degraded, mainly in the liver. Cholesterol oxidation products (COPs) have shown cytotoxicity, apoptotic and pro-inflammatory effects and they have also been linked with chronic diseases including atherosclerotic and neurodegenerative processess. In the case of phytosterol oxidation products (POPs), more research is needed on toxic effects. Nevertheless, current knowledge suggests they may also cause cytotoxic and pro-apoptotic effects, although at higher concentrations than COPs. Recently, new beneficial biological activities of oxysterols are being investigated. Whereas COPs are associated with cholesterol homeostasis mediated by different mechanisms, the implication of POPs is not clear yet. Available literature on sources of oxysterols in the organism, metabolism, toxicity and potential beneficial effects of these compounds are reviewed in this paper.

Peptide and protein quantification: a map of the minefield

The increasing popularity of gel-free proteomics technologies has created a strong demand for compatible quantitative analysis methods. As a result, a plethora of different techniques has been proposed to perform gel-free quantitative analysis of proteomics samples. Each of these methods comes with certain strengths and shortcomings, and they often are dedicated to a specific purpose. This review will present a brief overview of the main methods, organized by their underlying concepts, and will discuss the issues they raise with a focus on data processing. Finally, we will list the available software that can help with the data processing from quantitative experiments. We hope that this review will thus enable researchers to find the most appropriate method available for their research objectives, and can also serve as a basis for creating a reliable data processing strategy.

Stability of sterols in phytosterol-enriched milk under different heating conditions

Commercially available phytosterol-enriched milk was subjected to usual and drastic heating conditions to evaluate the stability of the sterols at different treatments. Products showed 422.2 mg of phytosterols/100 g of milk and 132 microg of sterol oxidation products (SOPs)/g of fat (277 microg of SOPs/100 g of milk). Schaal oven conditions (24 h/65 degrees C, equivalent to 1 month of storage at room temperature) reduced the phytosterol content by only 4%. Drastic heating treatments (2 min of microwave heating at 900 W or 15 min of electrical heating at 90 degrees C) led to a 60% decrease of total phytosterol content, with a significant increase of TBARs. The oxysterol amount under those conditions (which was higher in microwave-treated samples) was lower than expected, probably because of the degradation of the oxidation products. Usual heating conditions (1.5 min of microwaves) maintained phytosterol content on physiologically active values (301 mg/100 g of milk) with oxidation percentages around 0.12-0.40% for phytosterols and 1.13% for cholesterol.