Disruption and reassociation of casein micelles under high pressure: influence of milk serum composition and casein micelle concentration

Gastric aggregation of micellar casein powders induced by high hydrostatic pressure: Effect of serum Ca2+ level

Micellar casein (MC) has a unique gastric colloidal behavior in response to Ca2+ cross-linking, and its aggregation properties are closely related to pepsin and gastric acid. In this study, MC with different levels of colloidal calcium phosphate (CCP) was obtained by high hydrostatic pressure (HHP) at different pressures, followed by spray drying to obtain the powders. Different amounts of calcium chloride (exogenous Ca2+) were added to MC powders prior to in vitro simulated digestion to investigate the effect of exogenous serum Ca2+ levels on the aggregation behavior and the structure change of curds generated in gastric tract. The results revealed that HHP induced the emergence of more Ca2+-binding sites, thus Ca2+ was more likely to bind to MC matrix with low CCP levels. Meanwhile, high serum Ca2+ level provided more opportunities to form aggregates. The Highest pressure (500 MPa) with the highest Ca2+ level (5 mM) caused the lowest solubility aggregates, which were only 30% at the end of gastric digestion (120 min), half of the control sample (0 MPa with 0.15 mM Ca2+). The results of wide-angle X-ray scattering / small-angle X-ray scattering suggested that both pepsin and gastric acid-induced aggregation via Ca2+ as a bridge. For pepsin, Ca2+ cross-linked between para-κ-casein; For gastric acid, Ca2+ recombined phosphorylation sites and caused cross-linking of casein subunits.

Effect of reverse osmosis and ultra-high-pressure homogenization on the composition and microstructure of sweet buttermilk

Buttermilk (BM), the by-product of butter making, is similar to skim milk (SM) composition. However, it is currently undervalued in dairy processing because it is responsible for texture defects (e.g., crumbliness, decreased firmness) in cheese and yogurt. One possible way of improving the incorporation of BM into dairy products is by the use of technological pretreatments such as membrane filtration and homogenization. The study aimed at characterizing the effect of preconcentration by reverse osmosis (RO) and single-pass ultra-high-pressure homogenization (UHPH) on the composition and microstructure of sweet BM to modify its techno-functional properties (e.g., protein gel formation, syneresis, firmness). The BM and RO BM were treated at 0, 15, 150, and 300 MPa. Pressure-treated and control BM and RO BM were ultracentrifuged to fractionate them into the following 3 fractions: a supernatant soluble fraction (top layer), a colloidal fraction consisting of a cloudy layer (middle layer), and a high-density pellet (bottom layer). Compositional changes in the soluble fraction [lipid, phospholipid (PL), protein, and salt], as well as its protein profile by PAGE analysis, were determined. Modifications in particle size distribution upon UHPH were monitored by laser diffraction in the presence and absence of sodium citrate to dissociate the casein (CN) micelles. Microstructural changes in pressure-treated and non-pressure-treated BM and RO BM particles were monitored by confocal laser scanning microscopy. Particle size analysis showed that UHPH treatment significantly decreased the size of the milk fat globule membrane fragments in BM and RO BM. Also, pressure treatment at 300 MPa led to a significant increase in the recovery of total lipids, CN, calcium, and phosphate in the BM soluble fraction (top layer) following ultracentrifugation. However, PL were primarily concentrated in the pellet cloud (middle layer), located above the pellet in BM concentrated by RO. In contrast, PL were evenly distributed between soluble and colloidal phases of BM. This study provides insight into the modifications of sweet BM constituents induced by RO and UHPH from a compositional and structural perspective.

The Effect of pH and Sodium Caseinate on the Aqueous Solubility, Stability, and Crystallinity of Rutin towards Concentrated Colloidally Stable Particles for the Incorporation into Functional Foods

Poor water solubility and low bioavailability of hydrophobic flavonoids such as rutin remain as substantial challenges to their oral delivery via functional foods. In this study, the effect of pH and the addition of a protein (sodium caseinate; NaCas) on the aqueous solubility and stability of rutin was studied, from which an efficient delivery system for the incorporation of rutin into functional food products was developed. The aqueous solubility, chemical stability, crystallinity, and morphology of rutin (0.1–5% w/v) under various pH (1–11) and protein concentrations (0.2–8% w/v) were studied. To manufacture the concentrated colloidally stable rutin–NaCas particles, rutin was dissolved and deprotonated in a NaCas solution at alkaline pH before its subsequent neutralisation at pH 7. The excess water was removed using ultrafiltration to improve the loading capacity. Rutin showed the highest solubility at pH 11, while the addition of NaCas resulted in the improvement of both solubility and chemical stability. Critically, to achieve particles with colloidal stability, the NaCas:rutin ratio (w/w) had to be greater than 2.5 and 40 respectively for the lowest (0.2% w/v) and highest (4 to 8% w/v) concentrations of NaCas. The rutin–NaCas particles in the concentrated formulations were physically stable, with a size in the range of 185 to 230 nm and zeta potential of −36.8 to −38.1 mV, depending on the NaCas:rutin ratio. Encapsulation efficiency and loading capacity of rutin in different systems were 76% to 83% and 2% to 22%, respectively. The concentrated formulation containing 5% w/v NaCas and 2% w/v rutin was chosen as the most efficient delivery system due to the ideal protein:flavonoid ratio (2.5:1), which resulted in the highest loading capacity (22%). Taken together, the findings show that the delivery system developed in this study can be a promising method for the incorporation of a high concentration of hydrophobic flavonoids such as rutin into functional foods.

Assembled milk protein nano-architectures as potential nanovehicles for nutraceuticals

Nanoencapsulation of hydrophobic nutraceuticals with food ingredients has become one of topical research subjects in food science and pharmaceutical fields. To fabricate food protein-based nano-architectures as nanovehicles is one of effective strategies or approaches to improve water solubility, stability, bioavailability and bioactivities of poorly soluble or hydrophobic nutraceuticals. Milk proteins or their components exhibit a great potential to assemble or co-assemble with other components into a variety of nano-architectures (e.g., nano-micelles, nanocomplexes, nanogels, or nanoparticles) as potential nanovehicles for encapsulation and delivery of nutraceuticals. This article provides a comprehensive review about the state-of-art knowledge in utilizing milk proteins to assemble or co-assemble into a variety of nano-architectures as promising encapsulation and delivery nano-systems for hydrophobic nutraceuticals. First, a brief summary about composition, structure and physicochemical properties of milk proteins, especially caseins (or casein micelles) and whey proteins, is presented. Then, the disassembly and reassembly behavior of caseins or whey proteins into nano-architectures is critically reviewed. For caseins, casein micelles can be dissociated and further re-associated into novel micelles, through pH- or high hydrostatic pressure-mediated disassembly and reassembly strategy, or can be directly formed from caseinates through a reassembly process. In contrast, the assembly of whey protein into nano-architectures usually needs a structural unfolding and subsequent aggregation process, which can be induced by heating, enzymatic hydrolysis, high hydrostatic pressure and ethanol treatments. Third, the co-assembly of milk proteins with other components into nano-architectures is also summarized. Last, the potential and effectiveness of assembled milk protein nano-architectures, including reassembled casein micelles, thermally induced whey protein nano-aggregates, α-lactalbumin nanotubes or nanospheres, co-assembled milk protein-polysaccharide nanocomplexes or nanoparticles, as nanovehicles for nutraceuticals (especially those hydrophobic) are comprehensively reviewed. Due to the fact that milk proteins are an important part of diets for human nutrition and health, the review is of crucial importance not only for the development of novel milk protein-based functional foods enriched with hydrophobic nutraceuticals, but also for providing the newest knowledge in the utilization of food protein assembly behavior in the nanoencapsulation of nutraceuticals.

Impact of high-pressure treatment on casein micelles, whey proteins, fat globules and enzymes activity in dairy products: a review

The quality and safety of food products are the two factors that most influence the demands made by consumers. Contractual food sterilization and preservation methods often result in unfavorable changes in functional properties of foods. High-pressure processing (HPP) (50-1000 MPa) is a non-thermal preservation technique, which can effectively reduce the activity of spoilage and pathogenic microorganisms with minimal impact on the functional and nutritional properties of food. Comprehensive inquires have disclosed the potential profits of HPP as an alternative to heat treatments by affecting the structure of milk components, particularly proteins and fats. The present paper aims to investigate the effects of HPP on milk components including fats, casein, whey proteins, enzymes, and minerals, as well as on the industrial production of milk and dairy products including cheese, yogurt, ice cream, butter, cream, and probiotic dairy products. HPP allows to extend shelf life of products without the use of additives, meeting current consumer demands. The assurance of microbial safety and the production of food products with minimal changes in quality characteristics (organoleptic, nutritional, and rheological properties) are among its main effects. In addition, the nutritional value of HPP-treated dairy products is also preserved.

Doxorubicin-loaded casein nanoparticles for drug delivery: Preparation, characterization and in vitro evaluation

Casein, a milk protein that self-assembles to form micelles in aqueous solution, can bind to a wide range of drugs (hydrophilic and hydrophobic). Herein, a low cost and facile method was reported to prepare casein nanoparticles loaded with an anticancer drug, doxorubicin (DOX). The particles were fabricated by adding an excess of Ca²⁺ ions which brings the soluble casein present in the solution into the micellar framework to form dense nanoparticles. The binding between the drug and the macromolecule was confirmed using fluorescence studies. Circular Dichroism (CD) shows that upon addition of excess Ca²⁺ the protein chains rearrange. The nanoparticles were characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and dynamic light scattering (DLS). The release at pH 1 was higher than the physiological pH making this formulation potent for delivering the drug to the stomach via the oral route. The DOX attached with casein showed improved efficacy, i.e., better cytotoxicity against human pancreatic carcinoma cell line, PANC 1 cells as compared to the free drug of the same concentration, owing to higher cell uptake of the macromolecule.

pH-driven encapsulation of curcumin in self-assembled casein nanoparticles for enhanced dispersibility and bioactivity

The poor water solubility and bioactivity of lipophilic phytochemicals can be potentially improved by delivery systems. In this study, a low-cost, low-energy, and organic solvent-free encapsulation technology was studied by utilizing the pH-dependent solubility properties of curcumin and self-assembly properties of sodium caseinate (NaCas). Curcumin was deprotonated and dissolved, while NaCas was dissociated at pH 12 and 21 °C for 30 min. The subsequent neutralization enabled the encapsulation of curcumin in self-assembled casein nanoparticles. The degradation of curcumin under encapsulation conditions was negligible based on visible light and nuclear magnetic resonance spectroscopy. The dissociation of NaCas at pH 12 and reassociation after neutralization were confirmed using dynamic light scattering and analytical ultracentrifugation. The curcumin encapsulated in casein nanoparticles showed significantly improved anti-proliferation activity against human colorectal and pancreatic cancer cells. The studied encapsulation method is promising to utilize lipophilic compounds in food or pharmaceutical industries.

Improving clarity and stability of skim milk powder dispersions by dissociation of casein micelles at pH 11.0 and acidification with citric acid

Casein micelles in milk cause turbidity and have poor stability at acidic conditions. In this study, skim milk powder dispersions were alkalized to pH 10.0 or 11.0, corresponding to reduced particle mass. In the following acidification with hydrochloric or citric acid, the re-formation of casein particles was observed. The combination of treatment at pH 11.0 and acidification with citric acid resulted in dispersions with the lowest turbidity and smallest particles, which enabled translucent dispersions at pH 5.5-7.0, corresponding to discrete nanoparticles. The concentration of ionic calcium was lower when acidified with citric acid than hydrochloric acid, corresponding to smaller particles with less negative zeta potential. The pH 11.0 treatment followed by acidification with citric acid also resulted in smaller particles than the simple chelating effects (directly implementing sodium citrate). The produced casein nanoparticles with reduced dimensions can be used for beverage and other novel applications.

Pasteurization of milk proteins promotes allergic sensitization by enhancing uptake through Peyer's patches

BACKGROUND

The underlying mechanisms responsible for allergic sensitization to food proteins remain elusive. To investigate the intrinsic properties (as well as the effect of pasteurization) of the milk proteins alpha-lactalbumin, beta-lactoglobulin and casein that promote the induction of milk allergy.

METHODS

Alteration of structure and immune-reactivity of native and pasteurized proteins was assessed by gel filtration and ELISA. Uptake of these proteins was compared in vitro and in vivo. The biological effect was assessed by orally sensitizing C3H/HeJ mice with milk proteins followed by a graded oral challenge. Required dose to induce anaphylaxis, symptoms and mean body temperature was recorded. Antigen-specific antibodies and cytokine production by splenocytes were analyzed.

RESULTS

Soluble beta-lactoglobulin and alpha-lactalbumin but not insoluble casein were readily transcytosed through enterocytes in vitro and in vivo. Pasteurization caused aggregation of beta-lactoglobulin and alpha-lactalbumin inhibiting uptake by intestinal epithelial cells in vitro and in vivo. Furthermore, aggregation redirected uptake to Peyer's patches, which promoted significantly higher Th2-associated antibody and cytokine production in mice than their native counterparts. Despite this only the soluble forms of beta-lactoglobulin and alpha-lactalbumin elicited anaphylaxis (following priming) when allergens were administered orally. Aggregated beta-lactoglobulin and alpha-lactalbumin as well as casein required systemic administration to induce anaphylaxis.

CONCLUSIONS

These results indicate that triggering of an anaphylactic response requires two phases (1) sensitization by aggregates through Peyer's patches and (2) efficient transfer of soluble protein across the epithelial barrier. As the majority of common food allergens tend to form aggregates, this may be of clinical importance.

Effect of high hydrostatic pressure and whey proteins on the disruption of casein micelle isolates

High hydrostatic pressure disruption of casein micelle isolates was studied by analytical ultracentrifugation and transmission electron microscopy. Casein micelles were isolated from skim milk and subjected to combinations of thermal treatment (85°C, 20 min) and high hydrostatic pressure (up to 676 MPa) with and without whey protein added. High hydrostatic pressure promoted extensive disruption of the casein micelles in the 250 to 310 MPa pressure range. At pressures greater than 310 MPa no further disruption was observed. The addition of whey protein to casein micelle isolates protected the micelles from high hydrostatic pressure induced disruption only when the mix was thermally processed before pressure treatment. The more whey protein was added (up to 5 g/l) the more the protection against high hydrostatic pressure induced micelle disruption was observed in thermally treated samples subjected to 310 MPa.