Analysis of organophosphorus pesticides in dried ground ginseng root by capillary gas chromatography-mass spectrometry and -flame photometric detection

Carbon nanomaterials for the detection of pesticide residues in food: A review

In agricultural fields, pesticides are widely used, but their residual presence in the environment poses a threat to humans, animals, insects, and ecosystems. The overuse of pesticides for pest control, enhancement of crop yield, etc. leaves behind a significant residual amount in the environment. Various robust, reliable, and reusable methods using a wide class of composites have been developed for the monitoring and controlling of pesticides. Researchers have discovered that carbon nanomaterials have a wide range of characteristics such as high porosity, conductivity and easy electron transfer that can be successfully used to detect pesticide residues from food. This review emphasizes the role of carbon nanomaterials in the field of pesticide residue analysis in different food matrices. The carbon nanomaterials including carbon nanotubes, carbon dots, carbon nanofibers, graphene/graphene oxides, and activated carbon fibres are discussed in the review. In addition, the review examines future prospects in this research area to help improve detection techniques for pesticides analysis.

Status and advances in technologies for phosphorus species detection and characterization in natural environment- A comprehensive review

Poor recovery of phosphorus (P) across natural environment (water, soil, sediment, and biological sources) is causing rapid depletion of phosphate rocks and continuous accumulation of P in natural waters, resulting in deteriorated water quality and aquatic lives. Accurate detection and characterization of various P species using suitable analytical methods provide a comprehensive understanding of the biogeochemical cycle of P and thus help its proper management in the environment. This paper aims to provide a comprehensive review of the analytical methods used for P speciation in natural environment by dividing them into five broad categories (i.e., chemical, biological, molecular, staining microscopy, and sensors) and highlighting the suitability (i.e., targeted species, sample matrix), detection limit, advantages-limitations, and reference studies of all methods under each category. This can be useful in designing studies involving P detection and characterization across environmental matrices by providing insights about a wide range of analytical methods based on the end user application needs of individual studies.

Rapid Determination of 21 Chinese Domestically Registered Pesticides in Ginseng Using Cleanup Based on Zirconium-Oxide-Modified Silica and Ultrahigh-Performance Liquid Chromatography-Tandem Mass Spectrometry

In this study, an analytical method was developed for the rapid determination of 21 pesticides used in ginseng cultivation. All pesticides covered by this method have been registered by 2020 in China for use on ginseng. The extracts were cleaned up using zirconium-oxide-modified silica (Z-Sep) and primary secondary amine (PSA). The combination of Z-Sep and PSA provided good recovery for all analytes and the cleanest matrix background out of a number of PSA-based sorbent combinations, as indicated by high-performance liquid chromatography (HPLC) and gas chromatography (GC). Instrumental analysis was completed in 5 min using the ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The linearity (r > 0.99) for all analytes was satisfactory over the calibration range of 0.002-0.1 μg mL^-1. Intraday recoveries (n = 5) at ginseng-spiked levels of 0.02, 0.05, 0.1, and 1 mg kg^-1 ranged between 72% and 119%, with the corresponding relative standard deviations (RSDs), were less than 19%, while the interday recoveries (n = 15) ranged between 77% and 103%, and RSDs were less than 22%. Limits of quantitation (LOQs) ranged between 0.02 and 0.05 mg kg^-1 for all 21 pesticides. This is a seminal study using Z-Sep for the efficient cleanup of ginseng samples, and it could present a practical method for future monitoring of pesticide residues in ginseng produced in China.

The Most Active Oxidase-Mimicking Mn2 O3 Nanozyme for Biosensor Signal Generation

Oxidase-mimicking nanozymes are more desirable than peroxidase-mimicking ones since H₂ O₂ can be omitted. However, only a few nanomaterials are known for oxidase-like activities. In this work, we compared the activity of Mn₂ O₃ , Mn₃ O₄ and MnO₂ and found that Mn₂ O₃ had the highest oxidase activity. Interestingly, the activity of Mn₂ O₃ was even inhibited by H₂ O₂ . The oxidase-like activity of Mn₂ O₃ was not much affected by the presence of proteins such as bovine serum albumin (BSA), but the physisorption of antibodies to Mn₂ O₃ was not strong enough to withstand the displacement by BSA. We then treated Mn₂ O₃ with 3-aminopropyltriethoxysilane to graft an amine group, which was used to conjugate antibodies using glutaraldehyde as a crosslinker. A one-step indirect competitive ELISA (icELISA) was developed for the detection of isocarbophos, and an IC₅₀ of 261.7 ng/mL was obtained, comparable with the results of the standard two-step assay using horseradish peroxidase (HRP)-labeled antibodies. This assay has the advantage of significant timesaving for rapid detection of large amounts of samples. This work has discovered a highly efficient oxidase-mimicking nanozyme useful for various nano- and analytical applications.

A comparison of the effectiveness of QuEChERS, FaPEx and a modified QuEChERS method on the determination of organochlorine pesticides in ginseng

This study provides a review of methods used in the determination of organochlorine pesticides (OCPs) in ginseng and compares the effectiveness of three extraction methods (Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS), a modified QuEChERS and a Fast Pesticide Extraction (FaPEx)) in the analyses of 20 OCPs in ginseng root samples. For each method, sample mass, solvent volume and sorbent mass were varied to identify the optimum combination to effectively isolate analytes of interest from the complex sample matrix. Extracts were analyzed using the gas chromatography-μ-electron capture detector (GC-μ-ECD), and confirmatory analyses performed by gas chromatography-tandem-mass spectrometry (GC-MS/MS). Eighteen out of 20 OCPs spiked onto in-house prepared ginseng samples produced acceptable recoveries (51-156%) when extracted using QuEChERS and FaPEx. All 20 analytes, including dichlorodiphenyldichloroethane (p, p'- DDD) and dichlorodiphenyltrichloroethane (o, p'-DDT), produced acceptable recoveries (51-129%) with the use of a modified QuEChERS method. The applicability of the modified QuEChERS method was demonstrated through the analysis of ginseng samples grown in endosulfan-treated soil. The samples were analyzed by both GC-μ-ECD and GC-MS/MS with no significant difference identified in the results of each analytical method. This study highlights the applicability of the modified QuEChERS method, in combination with GC- μ-ECD, to determine organochlorine pesticides in ginseng. This may be especially useful for laboratories in developing countries and less advanced institutions without access to MS/MS instrumentation.

Effect of proteins on the oxidase-like activity of CeO2 nanozymes for immunoassays

Protein adsorption inhibits the oxidase-like activity of CeO₂ nanoparticles. Coating a partial shell of silica on CeO₂ and subsequent conjugation of antibodies allow highly sensitive and selective detection of fenitrothion.

An Electronic Nose Technology to Quantify Pyrethroid Pesticide Contamination in Tea

The contamination of tea with toxic pesticides is a major concern. Additionally, because of improved detection methods, importers are increasingly rejecting contaminated teas. Here, we describe an electronic nose technique for the rapid detection of pyrethroid pesticides (cyhalothrin, bifenthrin, and fenpropathrin) in tea. Using a PEN 3 electronic nose, the text screened a group of metal oxide sensors and determined that four of them (W5S, W1S, W1W, and W2W) are suitable for the detection of the same pyrethroid pesticide in different concentrations and five of them (W5S, W1S, W1W, W2W, and W2S) are suitable for the detection of pyrethroid pesticide. The models for the determination of cyhalothrin, bifenthrin, and fenpropathrin are established by PLS method. Next, using back propagation (BP) neural network technology, we developed a three-hidden-layer model and a two-hidden-layer model to differentiate among the three pesticides. The accuracy of the three models is 96%, 92%, and 88%, respectively. The recognition accuracies of the three-hidden-layer BP neural network pattern and two-hidden-layer BP neural network pattern are 98.75% and 97.08%, respectively. Our electronic nose system accurately detected and quantified pyrethroid pesticides in tea leaves. We propose that this tool is now ready for practical application in the tea industry.

Novel three-Dimensional molecularly imprinted polymer-coated carbon nanotubes (3D-CNTs@MIP) for selective detection of profenofos in food

A new and facile method for selective measurement of profenofos (PFF) using a simple flow-injection system with a molecularly-imprinted-polymer-coated carbon nanotube (3D-CNTs@MIP) amperometric sensor is proposed. The 3D-CNTs@MIP was synthesized by successively coating the surface of carboxylated CNTs with SiO₂ and vinyl end groups, then terminating with molecularly imprinted polymer (MIP) shells. MIP was grafted to the CNT cores using methacrylic acid (MAA) monomer, ethylene glycol dimethacrylate (EGDMA) as cross linker, and 2,2'-azobisisobutyronitrile (AIBN) as initiator. We constructed the PFF sensor by coating the surface of a glassy carbon electrode (GCE) with 3D-CNTs@MIP and removed the imprinting template by solvent extraction. Morphological and structural characterization reveal that blending of the MIP on the CNT surface significantly increases the selective surface area, leading to greater numbers of imprinting sites for improved sensitivity and electron transfer. The 3D-CNTs@MIP sensor exhibits a fast response with good recognition when applied to PFF detection by cyclic voltammetry and amperometry. The PFF oxidation current signal appears at +0.7 V vs Ag/AgCl using 0.1 M phosphate buffer (pH 7.0) as the carrier solution. The designed 3D-imprinted sensor provides a linear response over the range 0.01-200 μM (r² = 0.995) with a low detection limit of 0.002 μM (3σ). The sensor was successfully applied to detection of PFF in vegetable samples.

GC-MS-based identification and statistical analysis of liposoluble components in the rhizosphere soils of Panax notoginseng

Continuous cropping obstacle, mainly caused by microorganisms and organic components in soil, has become a serious problem for the plantation of Panax notoginseng (Araliaceae) due to the rapidly increased demands of this famous herbal medicine in recent decades. The rhizosphere soils cultivated with 3-year-old healthy and ill notoginseng were chemically investigated by gas chromatography-mass spectrometry (GC-MS) and compared with the corresponding soils without the plantation of notoginseng. Totally 47 liposoluble components were identified. Furthermore, the multiple statistical analysis showed that these constituents were qualitatively and quantitatively associated with the differences between the cultivated soil with P. notoginseng and the uncultivated soil. Among them, neophytadiene (4), d-α-tocopherol (38), (3β,22E,24S)-ergosta-5,22-dien-3-ol (39), (3β,24R)-ergost-5-en-3-ol (40), stigmasta-5,22-dien-3-ol (41), stigmast-4-en-3-one (44) and (5α)-stigmastane-3,6-dione (47) contributed most to the significant differences between the cultivated and uncultivated soils, whereas cyclopentadecane (3), octadecanoic acid methyl ester (16), docosanoic acid ethyl ester (31), nonacosane (34), 38 and 39 were found in much higher amount in the soils with ill P. notoginseng as compared to the case of those with the healthy P. notoginseng. On the other hand, liposoluble components in different cultivation areas were of great diversity; however, they were able to remain relatively consistent across the overall trend of differential substances.

Liposoluble components in the rhizosphere soils of Panax notoginseng were found as potential allelochemicals by GC-MS identification and statistical analysis.

Pesticide analysis using nanoceria-coated paper-based devices as a detection platform

We report the first use of a paper-based device coated with nanoceria as a simple, low-cost and rapid detection platform for the analysis of organophosphate (OP) pesticides using an enzyme inhibition assay with acetylcholinesterase (AChE) and choline oxidase (ChOX). In the presence of acetylcholine, AChE and ChOX catalyze the formation of H2O2, which is detected colorimetrically by a nanoceria-coated device resulting in the formation of a yellow color. After incubation with OP pesticides, the AChE activity was inhibited, producing less H2O2, and a reduction in the yellow intensity. The assay is able to analyze OP pesticides without the use of sophisticated instruments and gives detection limits of 18 ng mL(-1) and 5.3 ng mL(-1) for methyl-paraoxon and chlorpyrifos-oxon, respectively. The developed method was successfully applied to detect methyl-paraoxon in spiked vegetables (cabbage) and a dried seafood product (dried green mussel), obtaining ∼95% recovery values for both sample types. The spiked samples were also analyzed using LC-MS/MS as a comparison to the developed method and similar values were obtained, indicating that the developed method gives accurate results and is suitable for OP analysis in real samples.

Acetylcholinesterase biosensor based on electrochemically inducing 3D graphene oxide network/multi-walled carbon nanotube composites for detection of pesticides

A sensitive electrochemical biosensor for determining organophosphates and carbamate pesticides has been achieved by immobilizing acetylcholinesterase on electrochemically inducing 3D graphene oxide network/multi-walled carbon nanotubes composites.

Determination of Multiresidue Pesticides in Botanical Dietary Supplements Using Gas Chromatography-Triple-Quadrupole Mass Spectrometry (GC-MS/MS)

A simplified sample preparation method in combination with gas chromatography-triple-quadrupole mass spectrometry (GC-MS/MS) analysis was developed and validated for the simultaneous determination of 227 pesticides in green tea, ginseng, gingko leaves, saw palmetto, spearmint, and black pepper samples. The botanical samples were hydrated with water and extracted with acetonitrile, magnesium sulfate, and sodium chloride. The acetonitrile extract was cleaned up using solid phase extraction with carbon-coated alumina/primary-secondary amine with or without C18. Recovery studies using matrix blanks fortified with pesticides at concentrations of 10, 25, 100, and 500 μg/kg resulted in average recoveries of 70-99% and relative standard deviation of 5-13% for all tested botanicals except for black pepper, for which lower recoveries of fortified pesticides were observed. Matrix-matched standard calibration curves revealed good linearity (r(2) > 0.99) across a wide concentration range (1-1000 μg/L). Nine commercially available tea and 23 ginseng samples were analyzed using this method. Results revealed 36 pesticides were detected in the 9 tea samples at concentrations of 2-3500 μg/kg and 61 pesticides were detected in the 23 ginseng samples at concentrations of 1-12500 μg/kg.

Canola oil is an excellent vehicle for eliminating pesticide residues in aqueous ginseng extract

Background

We previously reported that two-phase partition chromatography between ginseng water extract and soybean oil efficiently eliminated pesticide residues. However, an undesirable odor and an unpalatable taste unique to soybean oil were two major disadvantages of the method. This study was carried out to find an alternative vegetable oil that is cost effective, labor effective, and efficient without leaving an undesirable taste and smell.

Methods

We employed six vegetable oils that were available at a grocery store. A 1-mL sample of the corresponding oil containing a total of 32 pesticides, representing four categories, was mixed with 10% aqueous ginseng extract (20 mL) and equivalent vegetable oil (7 mL) in Falcon tubes. The final concentration of the pesticides in the mixture (28 mL) was adjusted to approximately 2 ppm. In addition, pesticides for spiking were clustered depending on the analytical equipment (GC/HPLC), detection mode (electron capture detector/nitrogen–phosphorus detector), or retention time used. Samples were harvested and subjected to quantitative analysis of the pesticides.

Results

Soybean oil demonstrated the highest efficiency in partitioning pesticide residues in the ginseng extract to the oil phase. However, canola oil gave the best result in an organoleptic test due to the lack of undesirable odor and unpalatable taste. Furthermore, the qualitative and quantitative changes of ginsenosides evaluated by TLC and HPLC, respectively, revealed no notable change before or after canola oil treatment.

Conclusion

We suggest that canola oil is an excellent vehicle with respect to its organoleptic property, cost-effectiveness and efficiency of eliminating pesticide residues in ginseng extract.

Multifamily determination of pesticide residues in soya-based nutraceutical products by GC/MS-MS

An analytical method based on a modified QuEChERS extraction coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS) was evaluated for the determination of 177 pesticides in soya-based nutraceutical products. The QuEChERS method was optimised and different extraction solvents and clean-up approaches were tested, obtaining the most efficient conditions with a mixture of sorbents (PSA, C18, GBC and Zr-Sep(+)). Recoveries were evaluated at 10, 50 and 100 μg/kg and ranged between 70% and 120%. Precision was expressed as relative standard deviation (RSD), and it was evaluated for more than 160 pesticides as intra and inter-day precision, with values always below 20% and 25%, respectively. Limits of detection (LODs) ranged from 0.1 to 10 μg/kg, whereas limits of quantification (LOQs) from 0.5 to 20 μg/kg. The applicability of the method was proved by analysing soya-based nutraceuticals. Two pesticides were found in these samples, malathion and pyriproxyfen, at 11.1 and 1.5 μg/kg respectively.

Molecularly imprinted nanomicrospheres as matrix solid-phase dispersant combined with gas chromatography for determination of four phosphorothioate pesticides in carrot and yacon

An efficient, rapid, and selective method for sample pretreatment, namely, molecularly imprinted matrix solid-phase dispersion (MI-MSPD) coupled with gas chromatography (GC), was developed for the rapid isolation of four phosphorothioate organophosphorus pesticides (tolclofos-methyl, phoxim, chlorpyrifos, and parathion-methyl) from carrot and yacon samples. New molecularly imprinted polymer nanomicrospheres were synthesized by using typical structural analogue tolclofos-methyl as a dummy template via surface grafting polymerization on nanosilica. Then, these four pesticides in carrot and yacon were extracted and adsorbed using the imprinted nanomicrospheres and further determined by gas chromatography. Under the optimized conditions, a good linearity of four pesticides was obtained in a range of 0.05-17.0 ng·g(-1) with R varying from 0.9971 to 0.9996, and the detection limit of the method was 0.012~0.026 ng·g(-1) in carrot and yacon samples. The recovery rates at two spiked levels were in the range of 85.4-105.6% with RSD ≤9.6%. The presented MI-MSPD method combined the advantages of MSPD for allowing the extraction, dispersion, and homogenization in two steps and the advantages of MIPs for high affinity and selectivity towards four phosphorothioate pesticides, which could be applied to the determination of pesticide residues in complicated vegetal samples.

A rapid miniaturized residue analytical method for the determination of zoxamide and its two acid metabolites in ginseng roots using UPLC-MS/MS

A miniaturized residue method was developed for the analysis of the fungicide zoxamide and its metabolites in dried ginseng root. The zoxamide metabolites, 3,5-dichloro-1,4-benzenedicarboxylic acid (DCBC) and 3,5-dichloro-4-hydroxymethylbenzoic acid (DCHB), are small acid molecules that have not been previously extracted from the ginseng matrix with common multiresidue methods. The presented extraction method effectively and rapidly recovers both the zoxamide parent compound and its acid metabolites from fortified ginseng root. The metabolites are extracted with an alkaline glycine buffer and the aqueous ginseng mixture is partitioned with ethyl acetate. In addition, this method avoids the use of derivatization of the small acid molecules by using UPLC-MS/MS instrumental analysis. In a quantitative validation of the analytical method at three levels for zoxamide (0.007 (LOD), 0.02 (LOQ), and 0.2 mg/kg) and four levels (0.07 (LOD), 0.2 (LOQ), and 0.6 and 6 mg/kg) for both metabolites, acceptable method performances were achieved with recoveries ranging from 86 to 107% (at levels of LOQ and 3×, 10×, and 30× the LOQ) with <20% RSD for the three analytes in accordance with international guidelines.1.

Organophosphorus pesticide and ester analysis by using comprehensive two-dimensional gas chromatography with flame photometric detection

Thirty-seven phosphorus (P)-containing compounds comprising organophosphorus pesticides and organophosphate esters were analyzed by using comprehensive two-dimensional gas chromatography with flame photometric detection in P mode (GC × GC-FPD(P)), with a non-polar/moderately polar column set. A suitable modulation temperature and period was chosen based on experimental observation. A number of co-eluting peak pairs on the (1)D column were well separated in 2D space. Excellent FPD(P) detection selectivity, responding to compounds containing the P atom, produces clear 2D GC × GC plots with little interference from complex hydrocarbon matrices. Limits of detection (LOD) were within the range of 0.0021-0.048 μmol L(-1), and linear calibration correlation coefficients (R(2)) for all 37 P-compounds were at least 0.998. The P-compounds were spiked in 2% diesel and good reproducibility for their response areas and retention times was obtained. Spiked recoveries were 88%-157% for 5 μg L(-1) and 80%-138% for 10 μg L(-1) spiked levels. Both (1)tR and (2)tR shifts were noted when the content of diesel was in excess of 5% in the matrix. Soil samples were analyzed by using the developed method; some P-compounds were positively detected. In general, this study shows that GC × GC-FPD(P) is an accurate, sensitive and simple method for P-compound analysis in complicated environmental samples.

Recent methodology in ginseng analysis

As much as the popularity of ginseng in herbal prescriptions or remedies, ginseng has become the focus of research in many scientific fields. Analytical methodologies for ginseng, referred to as ginseng analysis hereafter, have been developed for bioactive component discovery, phytochemical profiling, quality control, and pharmacokinetic studies. This review summarizes the most recent advances in ginseng analysis in the past half-decade including emerging techniques and analytical trends. Ginseng analysis includes all of the leading analytical tools and serves as a representative model for the analytical research of herbal medicines.

Multiresidue pesticide analysis of dried botanical dietary supplements using an automated dispersive SPE cleanup for QuEChERS and high-performance liquid chromatography-tandem mass spectrometry

An automated dispersive solid phase extraction (dSPE) cleanup procedure as part of the Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) method, coupled with liquid chromatography-tandem mass spectrometry using electrospray ionization in positive mode, was used for the simultaneous analysis of 236 pesticides in three dried powdered botanical dietary supplements (ginseng, saw palmetto, and gingko biloba). The procedure involved extraction of the dried powdered botanical samples with salt-out acetonitrile/water extraction using anhydrous magnesium sulfate and sodium chloride, followed by an automated dSPE cleanup using a mixture of octadodecyl- (C18) and primary-secondary amine (PSA)-linked silica sorbents and anhydrous MgSO4 and online LC-MS/MS analysis. Dynamic multiple-reaction monitoring (DMRM) based on the collection of two precursor-to-product ion transitions with their retention time windows was used for all of the targeted pesticides and the internal standard. Matrix-matched calibration standards were used for quantitation, and standard calibration curves showed linearity (r(2) > 0.99) across a concentration range of 0.2-400 ng/mL for the majority of the 236 pesticides evaluated in the three botanical matrices. Mean recoveries (average %RSD, n = 4) were 91 (6), 93 (4), 96 (3), and 99 (3)% for ginseng, 101 (9), 98 (6), 99 (4), and 102 (3)% for gingko biloba, and 100 (9), 98 (6), 96 (4), and 96 (3)% for saw palmetto at fortification concentrations of 25, 100, 250, and 500 μg/kg, respectively. The geometric mean matrix-dependent instrument detection limits were 0.17, 0.09, and 0.14 μg/kg on the basis of the studies of 236 pesticides tested in ginseng roots, gingko biloba leaves, and saw palmetto berries, respectively. The method was used to analyze incurred ginseng samples that contained thermally labile pesticides with a concentration range of 2-200 μg/kg, indicating different classes of pesticides are being applied to these botanicals other than the traditional pesticides that are commonly used and analyzed by gas chromatography techniques. The method demonstrates the use of an automated cleanup procedure and the LC-MS/MS detection of multiple pesticide residues in dried, powdered botanical dietary supplements.

Multiresidue pesticide analysis in Korean ginseng by gas chromatography-triple quadrupole tandem mass spectrometry

In this study, a new analytical method was developed based on gas chromatography-triple quadrupole tandem mass spectrometry (GC-MS/MS) and used to determine 32 multiclass pesticides in ginseng products. The analytical method was validated, yielding recovery rates in the range of 55.2-108.3%, with precision values expressed as relative standard deviation (RSD) lower or equal to 12% at the spiking levels of 30, 100, and 1000 μg/kg. Correlation coefficients and LOQs (limit of quantification) were in the range 0.9801-0.9989 and 0.15-70 g/kg, respectively. With these validation data and this method, multiresidue pesticides of ginseng samples (fresh ginseng (n=118), red ginseng (n=24), dried ginseng (n=10)) were analysed. Among them, the most frequently detected pesticide was tolclofos-methyl. Tolclofos-methyl was detected in 86.4% of fresh ginseng (18.25-404.5 μg/kg), 91.7% of red ginseng (13.14-119.4 μg/kg), and 87.5% of dried ginseng (23.15-3673 μg/kg).

Isolation and analysis of ginseng: advances and challenges

Ginseng occupies a prominent position in the list of best-selling natural products in the world. Because of its complex constituents, multidisciplinary techniques are needed to validate the analytical methods that support ginseng's use worldwide. In the past decade, rapid development of technology has advanced many aspects of ginseng research. The aim of this review is to illustrate the recent advances in the isolation and analysis of ginseng, and to highlight new applications and challenges. Emphasis is placed on recent trends and emerging techniques.

Multiresidue pesticide analysis by capillary gas chromatography-mass spectrometry

A multiresidue pesticide method using a modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) procedure and capillary gas chromatography-mass spectrometry (GC-MS) is described for the determination of 166 organochlorine, organophosphorus, and pyrethroid pesticides, metabolites, and isomers in spinach. The pesticides from spinach were extracted using acetonitrile saturated with magnesium sulfate and sodium chloride, followed by solid-phase dispersive cleanup using primary-secondary amine and graphitized carbon black sorbents and toluene. Analysis is performed using different GC-MS techniques emphasizing the benefits of non-targeted acquisition and targeted screening procedures. Non-targeted data acquisition of pesticides in the spinach was demonstrated using GC coupled to a single quadrupole mass spectrometery (GC-MS) in full scan mode or multidimensional GC-time-of-flight mass spectrometery (GC  ×  GC-TOF/MS), along with deconvolution software and libraries. Targeted screening was achieved using GC-single quadrupole mass spectrometry in selective ion monitoring (GC-MS/SIM) mode or -tandem mass spectrometry (GC-MS/MS) in multiple reaction monitoring mode. The development of these techniques demonstrates the powerful use of GC-MS for the screening, identification, and quantitation of pesticide residues in foods.

Ultrasensitively sensing acephate using molecular imprinting techniques on a surface plasmon resonance sensor

An ultrathin molecularly imprinted polymer film was anchored on an Au surface for fabricating a surface plasmon resonance sensor sensitive to acephate by a surface-bound photo-radical initiator. The polymerization in the presence of acephate resulted in a molecular-imprinted matrix for the enhanced binding of acephate. Analysis of the SPR wavenumber changes in the presence of different concentrations of acephate gave a calibration curve that included the ultrasensitive detection of acephate by the imprinted sites in the composite, K(ass) for the association of acephate to the imprinted sites, 7.7×10(12) M(-1). The imprinted ultrathin film revealed impressive selectivity. The selectivity efficiencies for acephate and other structurally related analogues were 1.0 and 0.11-0.37, respectively. Based on a signal to noise ratio of 3, the detection limits were 1.14×10(-13) M for apple sample and 4.29×10(-14) M for cole sample. The method showed good recoveries and precision for the apple and cole samples spiked with acephate solution. This suggests that a combination of SPR sensing with MIP film is a promising alternative method for the detection of organophosphate compounds.

Assessing children's dietary pesticide exposure: direct measurement of pesticide residues in 24-hr duplicate food samples

BACKGROUND

The data presented here are a response to calls for more direct measurements of pesticide residues in foods consumed by children and provide an opportunity to compare direct measures of pesticide residues in foods representing actual consumption with those reported by the U.S. Department of Agriculture Pesticide Data Program.

OBJECTIVE

We measured pesticide residues in 24-hr duplicate food samples collected from a group of 46 young children participating in the Children's Pesticide Exposure Study (CPES).

METHODS

Parents were instructed to collect 24-hr duplicate food samples of all conventional fruits, vegetables, and fruit juices equal to the quantity consumed by their children, similarly prewashed/ prepared, and from the same source or batch. Individual or composite food items were analyzed for organophosphate (OP) and pyrethroid insecticide residues.

RESULTS

We collected a total of 239 24-hr duplicate food samples collected from the 46 CPES children. We found 14% or 5% of those food samples contained at least one OP or pyrethroid insecticide, respectively. We measured a total of 11 OP insecticides, at levels ranging from 1 to 387 ng/g, and three pyrethroid insecticides, at levels ranging from 2 to 1,133 ng/g, in children's food samples. We found that many of the food items consumed by the CPES children were also on the list of the most contaminated food commodities reported by the Environmental Working Group.

CONCLUSIONS

The frequent consumption of food commodities with episodic presence of pesticide residues that are suspected to cause developmental and neurological effects in young children supports the need for further mitigation.

Development of IC-ELISA for detection of organophosphorus pesticides in water

Diethyl (carboxymethyl) phosphonate (DECP) was used as the hapten to develop an indirect competitive enzyme-linked immunosorbent assay (IC-ELISA) for detecting organophosphorus pesticides (OPs). Conjugator of DECP with bovin serum albumin (BSA) was used as the immunogen for producing the polyclonal antibodies (PcAbs). Three antisera were obtained after the immune procedure. Characterization studies of the PcAbs indicated that the titer of antiserum-1 was highest in 3 antisera, and antiserum-1 had high affinity and specificity to the parathion, dichlorvos and pirimiphos. The IC-ELISA showed an IC50 of 0.428 micro g/mL with a detection limit of 0.0125 micro g/mL to parathion. The assay also indicated that the IC50 values of pirimiphos and dichlorvos were 0.331 micro g/mL and 1.25 micro g/mL respectively, and the detection limits of pirimiphos and dichlorvos were 0.0116 micro g/mL and 0.048 micro g/mL respectively. Recoveries of parathion, pirimiphos and dichlorvos spiked into water samples ranged from 90% to 160%. The results indicated that the ELISA could be a convenient and supplemental analytical tool for monitoring OPs residues in environmental water samples.

Analysis of pesticides in dried hops by liquid chromatography-tandem mass spectrometry

An analytical method was developed for the determination of eleven agrochemicals [abamectin (as B1a), bifenazate, bifenthrin, carfentrazone-ethyl, cymoxanil, hexythiazox, imidacloprid, mefenoxam, pymetrozine, quinoxyfen, and trifloxystrobin] in dried hops. The method utilized polymeric and NH2 solid phase extraction (SPE) column cleanups and liquid chromatography with mass spectrometry (LC-MS/MS). Method validation and concurrent recoveries from untreated dried hops ranged from 71 to 126% for all compounds over three levels of fortification (0.10, 1.0, and 10.0 ppm). Commercially grown hop samples collected from several field sites had detectable residues of bifenazate, bifenthrin, hexythiazox, and quinoxyfen. The control sample used was free of contamination below the 0.050 ppm level for all agrochemicals of interest. The limit of quantitation and limit of detection for all compounds were 0.10 and 0.050 ppm, respectively.