High-performance liquid chromatography-inductively coupled plasma mass spectrometry based method for the determination of organic arsenic feed additives and speciation of anionic arsenics in animal feed

Novel insights into the co-selection of metal-driven antibiotic resistance in bacteria: a study of arsenic and antibiotic co-exposure

The simultaneous development of antibiotic resistance in bacteria due to metal exposure poses a significant threat to the environment and human health. This study explored how exposure to both arsenic and antibiotics affects the ability of an arsenite oxidizer, Achromobacter xylosoxidans CAW4, to transform arsenite and its antibiotic resistance patterns. The bacterium was isolated from arsenic-contaminated groundwater in the Chandpur district of Bangladesh. We determined the minimum inhibitory concentration (MIC) of arsenite, cefotaxime, and tetracycline for A. xylosoxidans CAW4, demonstrating a multidrug resistance (MDR) trait. Following this determination, we aimed to mimic an environment where A. xylosoxidans CAW4 was exposed to both arsenite and antibiotics. We enabled the strain to grow in sub-MIC concentrations of 1 mM arsenite, 40 µg/mL cefotaxime, and 20 µg/mL tetracycline. The expression dynamics of the arsenite oxidase (aioA) gene in the presence or absence of antibiotics were analyzed. The findings indicated that simultaneous exposure to arsenite and antibiotics adversely affected the bacteria's capacity to metabolize arsenic. However, when arsenite was present in antibiotics-containing media, it promoted bacterial growth. The study observed a global downregulation of the aioA gene in arsenic-antibiotic conditions, indicating the possibility of increased susceptibility through co-resistance across the entire bacterial population of the environment. This study interprets that bacterial arsenic-metabolizing ability can rescue the bacteria from antibiotic stress, further disseminating environmental cross-resistance. Therefore, the co-selection of metal-driven antibiotic resistance in bacteria highlights the need for effective measures to address this emerging threat to human health and the environment.

Current advances in the detection and removal of organic arsenic by metal-organic frameworks

Arsenic (As) is a highly toxic heavy metal and has been widely concerned for its hazardous environmental impact. Aromatic organic arsenic (AOCs) has been frequently used as an animal supplement to enhance feed utilization and prevent dysentery. The majority of organic arsenic could be discharged from the body and evolve as highly toxic inorganic arsenic that is hazardous to the environment and human health via biological conversion, photodegradation, and photo-oxidation. Current environmental issues necessitate the development and application of multifunctional porous materials in environmental remediation. Compared to the conventional adsorbent, such as activated carbon and zeolite, metal-organic frameworks (MOFs) exhibit a number of advantages, including simple synthesis, wide variety, simple modulation of pore size, large specific surface area, excellent chemical stability, and easy modification. In recent years, numerous scientists have investigated MOFs related materials involved with organic arsenic. These studies can be divided into three categories: detection of organic arsenic by MOFs, adsorption to remove organic arsenic by MOFs, and catalytic removal of organic arsenic by MOFs. Here, we conduct a critical analysis of current research findings and knowledge pertaining to the structural characteristics, application methods, removal properties, interaction mechanisms, and spectral analysis of MOFs. We summarized the application of MOFs in organic arsenic detection, adsorption, and catalytic degradation. Other arsenic removal technologies and conventional substances are also being investigated. This review will provide relevant scientific researchers with references.

Ultrasensitive detection of four organic arsenic compounds at the same time using a five-link cardboard-based assay

In order to effectively control the excessive use of organic arsenic reagents in livestock and poultry products, there is an urgent need to develop a method for rapid detection of multiple organic arsenic reagents. In this study, two haptens were designed and derivatized around the structural formula of roxarsone, and a highly-sensitive group-selective mAb 3F2 was prepared, which can simultaneously detect roxarsone, 4-aminophenylarsonic acid, 2-aminophenylarsonic acid and phenylarsonic acid. We further developed a colloidal gold immunochromatographic test strip (ICS) and prepared a five-link card that can simultaneously detect four organic arsenics in chicken and pork samples. Its quantitative detection limits (LOQ) for the four compounds in chicken and pork samples were 0.06 and 0.32 ng/mL, 0.11 and 0.29 ng/mL, 0.34 and 0.99 ng/mL, and 0.88 and 1.5 ng/mL, respectively. This multi-ICS detection provides a powerful tool for the on-site detection and rapid screening of organic arsenic reagents in actual samples.

An integrated method for source apportionment of heavy metal(loid)s in agricultural soils and model uncertainty analysis

Elevated concentrations of heavy metals in agricultural soils threatening ecological security and the quality of agricultural products, and apportion their sources accurately is still a challenging task. Multivariate statistical analysis, GIS mapping, Pb isotopic ratio analysis (IRA), and positive matrix factorization (PMF) were integrated to apportion the potential sources of heavy metal(loid)s of orchard soil in Karst-regions. Study region soils were moderately contaminated by Cd. Obvious enrichment and moderate contamination level of Cd were found in study region surface soils, followed by As, Zn, and Pb. Correlation analysis (CA) and principal component analysis (PCA) indicated Ba, Co, Cr, Ni, V were mainly from natural sources, while As, Cd, Cu, Pb, Zn were derived from two kinds of anthropogenic sources. Based on Pb isotope composition, atmospheric deposition and livestock manure were the main sources of soil Pb accumulation. Further source identification and quantification results with PMF model and GIS mapping revealed that soil parent materials (46.44%) accounted for largest contribution to the soil heavy metal(loid)s, followed by fertilizer application (31.37%) and mixed source (industrial activity and manure, 22.19%). Uncertainty analysis indicated that the three-factors solution of PMF model was an optimal explanation and the heavy metal(loid) with lower percentage contributions had higher uncertainty. This study results can help to illustrate the sources of heavy metals more accurately in orchard agricultural soils with a clear expected future for further applications.

Selective solid-phase extraction of four phenylarsonic compounds from feeds, edible chicken and pork with tailoring imprinted polymer

The novel molecularly imprinted microspheres for four phenylarsonic compounds have been firstly prepared with the reversible addition-fragmentation chain transfer polymerization in a suspension system. The resulting polymeric microspheres were characterized by infrared spectrum, scanning electron microscope and differential scanning calorimetry. With serial adsorption experiments, the polymeric microspheres showed highly specific molecular recognition, fast mass transfer rate and robust adsorption of the substrates. Then, the imprinted polymer was used as the solid-phase extraction adsorbent to extract the phenylarsonic compounds from the feeds, edible chicken and pork. The cartridge was washed with 2 mL ethyl acetate and eluted with 3 mL of methanol- acetic acid (90:10, v/v). The recoveries of the molecularly imprinted solid-phase extraction (MISPE) column ranged from 83.4% to 95.1%. This work provided a versatile approach for the specific extraction of the organoarsenic compounds from complicated matrices and exhibited a bright future for the application of MISPE column.

Synthesis of Ag and TiO2 modified polycaprolactone electrospun nanofibers (PCL/TiO2-Ag NFs) as a multifunctional material for SERS, photocatalysis and antibacterial applications

In this study, we reported the design and the fabrication of Ag and TiO₂ modified polycaprolactone (PCL) electrospun nanofiber (NF) mats. The as-prepared NF mats were fabricated by one-step electrospinning and it was exploited for three different purposes (i) reusable SERS substrate for quantitative analysis to trace organic pollutants, (ii) photocatalyst for degradation of organic pollutants and (iii) antibacterial agent for killing of bacteria. Three different nanofiber mats, PCL, PCL-TiO₂, PCL/TiO₂-Ag NFs. were fabricated and further investigated. The morphologies and structures of the as-prepared nanofiber mats were carried out using X-ray diffraction spectroscopy (XRD), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX) and fourier transform infrared spectroscopy (FT-IR) techniques. PCL/TiO₂-Ag NFs served as a highly effective SERS platform with a detection limit of 10 nM for the detection of methylene blue dye (MB). A remarkable feature of the presented platform is the ability to reuse the PCL/TiO₂-Ag NFs for SERS analysis of MB; availing from its capability for self-cleaning under UV light. By employing PCL/TiO₂-Ag NFs nanocatalyst, complete photocatalytic degradation of the probe analytes MB and ibuprofen (Ibu) under UV irradiation was accomplished not more than 180 min. Moreover, PCL/TiO₂-Ag NF mats showed a highly promising bactericidal feature against gram-negative Escherichia coli and gram-positive Staphylococcus aureus bacteria, which immensely emerged due to the presence of Ag NPs. This new trending nanofiber is assumed to lead a bunch of changes in the field of photocatalytic, SERS and antibacterial studies.

Aromatic organoarsenic compounds (AOCs) occurrence and remediation methods

Many researchers at home and abroad have made a body of researches and have gained great achievements on the environmental occurrence, fate, and toxicity of inorganic arsenic. But there is less research on the use of aromatic organoarsenic compounds (AOCs), which are common feed additives for livestock in the poultry industry. In this review, we outline the current state of knowledge acquired on the occurrence and remediation of AOCs, respectively. We also identify knowledge gaps and research needs, including the elucidation of the environmental fate of AOCs, metabolic pathway, the impact of metabolic modification on toxicity, and advanced analytical or repaired methods that allows for monitoring, identification or removal of the degradation products.

Speciation of As in environmental samples using the nano-TiO2/PCHG-FAAS online system

This work presents an alternative method for arsenic speciation using the nano-TiO₂ hydride generation photocatalytic hydride generation (PCHG) system, which is easily separated from the medium. Nano-TiO₂ was studied as photocatalyst to reduction of arsenic species by UV-induced with formic acid and atomic absorption detection of different forms of arsenic [As (III), As (V), dimethylarsinic acid (DMA)] in environmental samples (water, sediment and plant). The effect of the average pH, the organic acid concentration, the ultraviolet irradiation time and their amount were investigated. With the presence of formic acid, the process was more effective in the reduction of arsenic when compared to other organic acids, mainly acetic acid. In addition, the photocatalytic hydride generation and flame atomic absorption spectrometry (nano-TiO₂/PCHG-FAAS) increased the identification and quantification of different arsenic species. The ultrasound extraction procedure was used as a method to prepare samples with solutions of 1.0 mol L^-1 phosphoric acid. The accuracy of the measurements (n = 12), calculated as relative standard deviation, was less than 8.6%. The detection limits for As (III) and As (total) in samples were 0.418 and 0.574 μg g^-1, respectively.

A Review on Recent Applications of High-Performance Liquid Chromatography in Metal Determination and Speciation Analysis

High-performance liquid chromatography (HPLC) has several advantages over the conventional methods due to their operational simplicity. It is a vital tool to determine metal ions having same mass but different electronic configuration, to separate complex mixtures and to resolve ions that may be indistinguishable by mass spectrometry alone. Metal ions play vital role in many biological processes and involved in setting up of many diseases. Therefore, the development of simple methods for the detection and quantification of metals in real samples might serve as diagnostic tools for various diseases. This review article focuses on the recent main feature of this technique, i.e. speciation of metal ions and their applications to series of problem of metal ion chemistry in different environmental matrixes. Speciation of metals is of increasing interest and has a great importance because of bioavailability, environmental mobility, toxicity and potential risk of metals. With the capability of partitioning the complex species of different metal ions, HPLC is an efficient technique for this task. This review summarizes recent advances in the development of HPLC to the fundamental understanding of metal ion chemistry in the environment and discusses all the issues that still need a lot of consideration. It has been classified into different sections depending on the role of HPLC in separation used and metal speciation; furthermore, the underlying sample preconcentration techniques and detection systems involved for the determination of metal ions and their applications were discussed.

Speciation analysis of organoarsenic compounds in livestock feed by microwave-assisted extraction and high performance liquid chromatography coupled to atomic fluorescence spectrometry

The development of a new method to determine the presence of the organoarsenic additives p-arsanilic acid (ASA), roxarsone (ROX) and nitarsone (NIT) in livestock feeds by high performance liquid chromatography coupled to ultraviolet oxidation hydride generation atomic fluorescence spectrometry (HPLC-UV/HG-AFS) after microwave assisted extraction (MAE) was proposed. Chromatographic separation was achieved on a C18 column with 2% acetic acid/methanol (96:4, v/v) as the mobile phase. The limits of detection (LODs) were 0.13, 0.09 and 0.08mgL^-1, and the limits of quantification (LOQs) were 0.44, 0.30 and 0.28mgL^-1. The relative standard deviations (RSDs) for ASA, ROX and NIT determined from five measurements of the mixed calibration standard were 3.3, 5.3, and 5.4%, respectively. MAE extraction of phenylated arsenic compounds using 1.5M H₃PO₄ at 120°C for 45min allowed for maximum recoveries (%) of total arsenic (As) and organoarsenic species, with no degradation of these compounds. The extraction of total As was approximately 97%, and the As species recoveries were between 95.2 and 97.0%. The results of the analysis were validated using mass balance by comparing the sum of extracted As with the total concentration of As in the corresponding samples. The method was successfully applied to determine the presence of these compounds in feed samples. ASA was the only As species detected in chicken feed samples, with a concentration between 0.72 and 12.91mgkg^-1.

Heavy Metal Induced Antibiotic Resistance in Bacterium LSJC7

Co-contamination of antibiotics and heavy metals prevails in the environment, and may play an important role in disseminating bacterial antibiotic resistance, but the selective effects of heavy metals on bacterial antibiotic resistance is largely unclear. To investigate this, the effects of heavy metals on antibiotic resistance were studied in a genome-sequenced bacterium, LSJC7. The results showed that the presence of arsenate, copper, and zinc were implicated in fortifying the resistance of LSJC7 towards tetracycline. The concentrations of heavy metals required to induce antibiotic resistance, i.e., the minimum heavy metal concentrations (MHCs), were far below (up to 64-fold) the minimum inhibition concentrations (MIC) of LSJC7. This finding indicates that the relatively low heavy metal levels in polluted environments and in treated humans and animals might be sufficient to induce bacterial antibiotic resistance. In addition, heavy metal induced antibiotic resistance was also observed for a combination of arsenate and chloramphenicol in LSJC7, and copper/zinc and tetracycline in antibiotic susceptible strain Escherichia coli DH5α. Overall, this study implies that heavy metal induced antibiotic resistance might be ubiquitous among various microbial species and suggests that it might play a role in the emergence and spread of antibiotic resistance in metal and antibiotic co-contaminated environments.

Organoarsenicals in poultry litter: detection, fate, and toxicity

Arsenic contamination in groundwater has endangered the health and safety of millions of people around the world. One less studied mechanism for arsenic introduction into the environment is the use of organoarsenicals in animal feed. Four organoarsenicals are commonly employed as feed additives: arsanilic acid, carbarsone, nitarsone, and roxarsone. Organoarsenicals are composed of a phenylarsonic acid molecule with substituted functional groups. This review documents the use of organoarsenicals in the poultry industry, reports analytical methods available for quantifying organic arsenic, discusses the fate and transport of organoarsenicals in environmental systems, and identifies toxicological concerns associated with these chemicals. In reviewing the literature on organoarsenicals, several research needs were highlighted: advanced analytical instrumentation that allows for identification and quantification of organoarsenical degradation products; a greater research emphasis on arsanilic acid, carbarsone, and nitarsone; identification of degradation pathways, products, and kinetics; and testing/development of agricultural wastewater and solid treatment technologies for organoarsenical-laden waste.

Arsenic pollution of agricultural soils by concentrated animal feeding operations (CAFOs)

Animal wastes from concentrated animal feeding operations (CAFOs) can cause soil arsenic pollution due to the widespread use of organoarsenic feed additives. This study investigated the arsenic pollution of surface soils in a typical CAFO zone, in comparison with that of agricultural soils in the Pearl River Delta, China. The mean soil arsenic contents in the CAFO zone were elevated compared to those in the local background and agricultural soils of the Pearl River Delta region. Chemical speciation analysis showed that the soils in the CAFO zone were clearly contaminated by the organoarsenic feed additive, p-arsanilic acid (ASA). Transformation of ASA to inorganic arsenic (arsenite and arsenate) in the surface soils was also observed. Although the potential ecological risk posed by the arsenic in the surface soils was relatively low in the CAFO zone, continuous discharge of organoarsenic feed additives could cause accumulation of arsenic and thus deserves significant attention.

Selectively adsorptive extraction of phenylarsonic acids in chicken tissue by carboxymethyl α-cyclodextrin immobilized Fe3O4 magnetic nanoparticles followed ultra performance liquid chromatography coupled tandem mass spectrometry detection

Carboxymethyl α-cyclodextrin immobilized Fe₃O₄ magnetic nanoparticles (CM-α-CD-Fe₃O₄) were synthesized for the selectively adsorptive extraction of five phenylarsonic acids including p-amino phenylarsonic acid, p-nitro phenylarsonic acid, p-hydroxy phenylarsonic acid, p-acylamino phenylarsonic acid and p-hydroxy-3-nitro phenylarsonic acid in chicken tissue. Using ultra performance liquid chromatography coupled with tandem mass spectrometry (UPLC-MS/MS), a highly sensitive analytical method was proposed for the determination of five phenylarsonic acids. It was shown that CM-α-CD-Fe₃O₄ could extract the five phenylarsonic acids in complex chicken tissue samples with high extraction efficiency. Under the optimal conditions, a high enrichment factor, ranging from 349 to 606 fold, was obtained. The limits of detection (LODs) (at a signal-to-noise ratio of 3) were in the range of 0.05–0.11 µg/kg for the five phenylarsonic acids. The proposed method was applied for the determination of five target phenylarsonic acids in chicken muscle and liver samples. Recoveries for the spiked samples with 0.2 µg/kg, 2.0 µg/kg and 20 µg/kg of each phenylarsonic acids were in the range of 77.2%–110.2%, with a relative standard deviation (RSD) of less than 12.5%.

Electroanalysis of As(iii) at nanodendritic Pd on PEDOT

Nanodendritic Pd electrodeposited on poly(3,4-ethylenedioxythiophene) coated carbon paper electrodes is studied for electroanalysis of As(iii).

Arsenic species in poultry feather meal

Organoarsenical drugs are widely used in the production of broiler chickens in the United States. Feathers from these chickens are processed into a meal product that is used as an animal feed additive and as an organic fertilizer. Research conducted to date suggests that arsenical drugs, specifically roxarsone, used in poultry production result in the accumulation of arsenic in the keratinous material of poultry feathers. The use of feather meal product in the human food system and in other settings may result in human exposures to arsenic. Consequently, the presence and nature of arsenic in twelve samples of feather meal product from six US states and China were examined. Since arsenic toxicity is highly species-dependent, speciation analysis using HPLC/ICPMS was performed to determine the biological relevance of detected arsenic. Arsenic was detected in all samples (44-4100 μg kg(-1)) and speciation analyses revealed that inorganic forms of arsenic dominated, representing 37 - 83% of total arsenic. Roxarsone was not detected in the samples (<20 μg As kg(-1)). Feather meal products represent a previously unrecognized source of arsenic in the food system, and may pose additional risks to humans as a result of its use as an organic fertilizer and when animal waste is managed.

Organic solvent-free reversed-phase ion-pairing liquid chromatography coupled to atomic fluorescence spectrometry for organoarsenic species determination in several matrices

A novel method has been developed to determine As-containing animal feed additives including roxarsone (ROX), p-arsanilic acid (p-ASA) and nitarsone (NIT), as well as other organic As species (dimethylarsonic acid (DMAA) and monomethylarsonic acid (MMAA)) by ion-pairing high-performance liquid chromatography coupled to hydride generation atomic fluorescence spectrometry (IP-HPLC-HG-AFS). A simple isocratic reversed-phase (RP) HPLC method with a mobile phase containing citric acid and sodium hexanesulfonate (pH 2.0) was developed using a C(18) column. The use of an organic solvent free mobile phase turns this methodology into an environmentally friendly alternative. Several ion pair forming agents, such as sodium hexanesulfonate, tetrabutylammonium bisulfate and perfluoroheptanoic acid, were studied. The limits of detection for As species were calculated in standard solution and resulted to be 0.2, 0.5, 0.6, 1.6, and 1.6 μg As L(-1) for MMAA, DMAA, p-ASA, ROX and NIT, respectively. This method exhibited convenient operation, high sensitivity and good repeatability. It was applied to As speciation in different samples including arugula, dog food, dog urine and chicken liver.