Loop-mediated isothermal amplification: rapid visual and real-time methods for detection of genetically modified crops

Loop-Mediated Isothermal Amplification for Detecting Gly-4891-Glu and Ile-4734 Multiple Mutations of Ryanodine Receptor in the Fall Armyworm, Spodoptera frugiperda

The key mutations, such as the Gly-4891-Glu substitution and the Ile-4734 multiple substitutions within the ryanodine receptors (RyR), are linked to diamide resistance in fall armyworm (FAW), Spodoptera frugiperda. In this study, we found that FAW remained sensitive to cyantraniliprole and chlorantraniliprole, while its sensitivity to flubendiamide was reduced. Moreover, a low level of heterozygous mutation at I4743 was observed. To facilitate the detection procedure of these mutations, a simple and efficient loop-mediated isothermal amplification (LAMP) protocol was developed for operation. The reaction for detecting the G4891E and I4743 single or multiple mutations was carried out at 68 °C for 85 min and 68 °C for 85 min or 68 °C for 65 min, respectively. These LAMP reactions can be easily observed via visualization of the color change from pink to yellow. This assay provides a simple, convenient, and effective means of detecting mutations in the RyR of FAW for pest management purposes.

Multiplex Real-Time Loop-Mediated Isothermal Amplification (LAMP) Based on the Annealing Curve Analysis: Toward an On-Site Multiplex Detection of Transgenic Sequences in Seeds and Food Products

Monitoring of the introduction of unapproved genetically modified (GM) events is required because the approval status of a GM event may differ from country to country. The on-site methods such as loop-mediated isothermal amplification (LAMP) offer a technological answer for the rapid GM detection beyond the laboratories. Real-time LAMP assays detecting one GM target were reported earlier. To increase the efficiency of the assay, a multiplex real-time LAMP simultaneously targeting Figwort Mosaic Virus promoter (P-FMV) that constructs region between the Cauliflower Mosaic Virus 35S promoter and cry1Ac gene (p35S-cry1Ac) and neomycin phosphotransferase II (nptII) marker gene was developed. The assay could detect as low as 0.1% for each GM target within 45 min. To the best of our knowledge, multiplexing in real-time LAMP using the Genie II system with applicability in GM detection has been reported herein for the first time. The developed method provides rapid, on-site, and real-time GM detection in seeds and food products.

Analysis of Whole-Genome for Identification of Seven Penicillium Species with Significant Economic Value

The Penicillium genus exhibits a broad global distribution and holds substantial economic value in sectors including agriculture, industry, and medicine. Particularly in agriculture, Penicillium species significantly impact plants, causing diseases and contamination that adversely affect crop yields and quality. Timely detection of Penicillium species is crucial for controlling disease and preventing mycotoxins from entering the food chain. To tackle this issue, we implement a novel species identification approach called Analysis of whole GEnome (AGE). Here, we initially applied bioinformatics analysis to construct specific target sequence libraries from the whole genomes of seven Penicillium species with significant economic impact: P. canescens, P. citrinum, P. oxalicum, P. polonicum, P. paneum, P. rubens, and P. roqueforti. We successfully identified seven Penicillium species using the target we screened combined with Sanger sequencing and CRISPR-Cas12a technologies. Notably, based on CRISPR-Cas12a technology, AGE can achieve rapid and accurate identification of genomic DNA samples at a concentration as low as 0.01 ng/µL within 30 min. This method features high sensitivity and portability, making it suitable for on-site detection. This robust molecular approach provides precise fungal species identification with broad implications for agricultural control, industrial production, clinical diagnostics, and food safety.

Single-tube, single-strip lateral flow assays utilizing loop-mediated isothermal amplification for simultaneous hepatitis B and C viral detection

Globally, hepatitis B virus (HBV) affects over 250 million people, whereas hepatitis C virus (HCV) affects approximately 70 million people, posing major public health challenges. Despite the availability of vaccines and treatments, a lack of comprehensive diagnostic coverage has left many cases undiagnosed and untreated. To address the need for sensitive, specific, and accessible diagnostics, this study introduced a multiplex loop-mediated isothermal amplification assay with lateral flow detection for simultaneous HBV and HCV testing. This assay achieved exceptional sensitivity and was capable of detecting HBV and HCV concurrently in a single tube and on a single strip within 25 min, achieving the required clinical sensitivity (10 and 103 genomic copies/reaction for HBV and HCV, respectively). The method was validated in clinical samples of various viral genotypes, achieving an equivalent limit of detection. Additionally, a custom portable heating device was developed for field use. The assay developed here, capable of direct viral detection on the strip, shows promise in supplanting current methods that solely identify antibodies and necessitate additional qPCR for viral activity assessment. This economical and rapid assay aligns with point-of-care testing needs, offering significant advancements in enhancing viral hepatitis diagnostics in settings with limited resources.

A Portable Nucleic Acid Sensor Based on PCR for Simple, Rapid, and Sensitive Testing of Botrytis cinerea in Ginseng

Botrytis cinerea is a ubiquitous pathogen that can infect at least 200 dicotyledonous plant species including many agriculturally and economically important crops. In Ginseng, the fungus may cause ginseng gray mold disease, causing great economic losses in the ginseng industry. Therefore, the early detection of B. cinerea in the process of ginseng production is necessary for the disease prevention and control of the pathogen's spread. In this study, a polymerase chain reaction-nucleic acid sensor (PCR-NAS) rapid detection technique was established, and it can be used for field detection of B. cinerea through antipollution design and portable integration. The present study showed that the sensitivity of PCR-NAS technology is 10 times higher than that of traditional PCR-electrophoresis, and there is no need for expensive detection equipment or professional technicians. The detection results of nucleic acid sensors can be read by the naked eye in under 3 min. Meanwhile, the technique has high specificity for the detection of B. cinerea. The testing of 50 field samples showed that the detection results of PCR-NAS were consistent with those of the real-time quantitative PCR (qPCR) method. The PCR-NAS technique established in this study can be used as a novel nucleic acid field detection technique, and it has a potential application in the field detection of B. cinerea to achieve early warning of the pathogen infection.

An Accurate, Rapid and Cost-Effective Method for T-nos Detection Based on CRISPR/Cas12a

CRISPR/Cas12a technology is used for nucleic acid detection due to its specific recognition function and non-specific single-stranded DNA cleavage activity. Here, we developed a fluorescence visualisation detection method based on PCR and CRISPR/Cas12a approaches. The method was used to detect the nopaline synthase terminator (T-nos) of genetically modified (GM) crops, circumventing the need for expensive instruments and technicians. For enhanced sensitivity and stability of PCR-CRISPR/Cas12a detection, we separately optimised the reaction systems for PCR amplification and CRISPR/Cas12a detection. Eleven samples of soybean samples were assessed to determine the applicability of the PCR-CRISPR/Cas12a method. The method could specifically detect target gene levels as low as 60 copies in the reaction within 50 min. In addition, accurate detection of all 11 samples confirmed the applicability. The method is not limited by large-scale instruments, making it suitable for mass detection of transgenic components in plants in the field. In conclusion, we developed a new, accurate, rapid, and cost-effective method for GM detection.

Dual-color blending based visual LAMP for food allergen detection: A strategy with enlarged color variation range and contrast

•

A near contrast color change was obtained by blending HNB and CR colorimetric LAMP detection process.

•

The sensitivity of the dual-color blending method was comparable to the real-time LAMP.

•

The ratio between the two visual dyes in the dual-color blending method is crucial.

•

The reaction is conducted in one tube and no lid-opening was needed.

Food allergy has been a serious public health problem around the world. Its prevention relies heavily on the effective avoidance of any contaminated food, making clear and accurate detection very important. LAMP is one of the most potent methods for allergen rapid detection. However, its current colorimetric readouts usually have low color contrast and narrow color variation range. Thus, here we proposed a strategy based on color evolution to enlarge the variation range as well as the contrast to improve its suitability for naked-eye observation. By simply blending two commonly used color change processes during amplification, a wider color variation window, and a near contrast color change, purple-to-green with a hues difference of 10 were obtained. Three important allergens (walnuts, hazelnuts, and peanuts) were tested with a comparable sensitivity towards fluorescent real-time LAMP. Its feasibility for practical use has also been studied. This simple but effective strategy provides a new idea for the colorimetric detection of LAMP amplicons and can be applied to various fields.

GmoDetector: An accurate and efficient GMO identification approach and its applications

The rapid increase of genetically modified organisms (GMOs) entering the food and feed markets, and the contamination of donor (micro)organisms of transgenic elements make it more challenging for the existing GMO detection. In this study, we developed a high-throughput and contamination-removal GMO detection approach named as GmoDetector. GmoDetector targeted 64 common transgenic elements and 76 GMO-specific events collected from 251 singular GM events, and combined with next generation sequencing (NGS) and target enrichment technology to detect various GMOs. As a result, GmoDetector was able to exclude the donor (micro)organism contamination, and detect the authorized and unauthorized GMOs (UGMOs) in any forms of food or feed, such as processed or unprocessed. The sensitivity of GmoDetector is as low as 0.1% (GMO content), which has met the GMO labeling threshold for all countries. Therefore, GmoDetector is a robust tool for accurate and efficient detection of the authorized and UGMOs.

Construct-Specific Loop-Mediated Isothermal Amplification: Rapid Detection of Genetically Modified Crops with Insect Resistance or Herbicide Tolerance

BACKGROUND

Insect resistant and herbicide tolerant genetically modified (GM) events have been approved in many countries. Screening methods could facilitate preliminary testing to check the GM status, which may target control elements, transgenes, and marker genes or construct regions. Among these, methods targeting the construct region, i.e., the junction between two genetic elements of a transgenic cassette are more specific.

OBJECTIVE

Loop-mediated isothermal amplification (LAMP) assays targeting three construct regions were developed; between Cauliflower Mosaic Virus 35S promoter and cry1Ac gene (p35S-cry1Ac), cry2Ab2 gene and nos terminator (cry2Ab2-tnos), and cp4-epsps gene and nos terminator (cp4epsps-tnos).

METHOD

LAMP assays were performed by incubation at constant temperatures for selected targets. Positive amplification was detected as a change in color from orange to green on addition of SYBR® Green dye in visual LAMP and as real-time amplification curves in real-time LAMP.

RESULTS

These assays showed acceptable specificity and sensitivity. Visual LAMP was found to be sensitive enough to detect as low as 0.005%, equivalent to two target copies. Real-time LAMP assays were able to detect as low as four copies of the target within 40 min, making them suitable for rapid on-site testing for GM organisms (GMO). Practical utility was also verified using spiked test samples.

CONCLUSIONS

These assays could be employed to address some of the biosafety or post-release monitoring issues, as well as to check for approved and unapproved GM events in a country.

HIGHLIGHTS

LAMP assays targeting three construct regions have been developed, enabling screening for approved or unapproved GMO.

Loop-mediated isothermal amplification technique: principle, development and wide application in food safety

Food safety is a major and enduring challenge and has a profound impact on the quality of human life. Loop-mediated isothermal amplification (LAMP) is a relatively novel gene amplification method under isothermal conditions with rapidity, simplicity and high specificity. This review will describe the principles and development of the LAMP technique along with its advantages and disadvantages, such as LAMP integrated on classical microfluidic chips, paper-chips, electrochemical devices, nanomaterials and digital devices. Moreover, we will systematically and comprehensively review its applications in the field of food safety, such as in the detection of foodborne pathogens, allergens and organophosphorus pesticides and genetically modified organisms; finally its development trends in food safety will be discussed.

Visual detection for nucleic acid-based techniques as potential on-site detection methods. A review

Nucleic acid-based techniques could achieve highly sensitive detection by amplifying template molecules to millions of folds. It has been one of the most valued analytical methods and is applied in many detection fields, such as diagnosis of infectious diseases, food safety assurance and so on. Nucleic acid-based techniques consist of three steps: nucleic acid extraction, amplification, and product detection. Among them, the detection step plays a vital role because it shows the results directly. As the trend of detection is simple, rapid and instrument-free, it is of necessity to carry out visual detection, where the result read-out could be visible and distinguished by the naked eye. In this critical review, advanced visual detection methods are summarized and discussed in detail, aiming to promote the potential application in on-site detection.

DaimonDNA: A portable, low-cost loop-mediated isothermal amplification platform for naked-eye detection of genetically modified organisms in resource-limited settings

The steady increase in commercialization of genetically modified organisms (GMOs) demands low-cost, rapid and portable GMO-detection methods that are technically and economically sustainable. Traditional nucleic acid detection platforms are still expensive, immobile and generate complex read-outs to be analyzed by experienced personal. Herein, we report the development of a portable, rapid and user-friendly GMO-detection biosensor, DaimonDNA. The system specifically amplifies the target DNA using loop-mediated isothermal amplification (LAMP) and provides real-time, naked-eye detection with Hydroxynaphthol blue reagent in less than 30 min. The construction of the platform relies on 3D printing and off-the-shelf electronic components that makes it extremely low-cost (<25 Euro), light weight (108 g), mobile (6 × 6 × 3 cm) and suitable for field deployment. We present the detection of the soybean lectin gene as a species control, and P35S as a transgene element found in many GMO varieties. We confirmed specificity of the DaimonDNA biosensor using" RoundUp Ready (RRS)" and MON89788 soybean genomic DNA with P35S and lectin primer sets. We characterized sensitivity of our system using 76.92, 769.2 and 7692 copies of RRS soybean genomic DNA in a non-GMO background. We benchmarked the DNA amplification and detection efficiency of our system against a thermocycling machine by quantifying the images obtained from gel electrophoresis and showed that our system is comparable to most other reported isothermal amplification techniques. This system can also be used for widespread point-of-care or field-based testing that is infrequently performed due to the lack of rapid, inexpensive, user-friendly and portable methods.

Optimised LAMP allows single copy detection of 35Sp and NOSt in transgenic maize using Bioluminescent Assay in Real Time (BART)

Loop-mediated amplification (LAMP) has been widely used to amplify and hence detect nucleic acid target sequences from various pathogens, viruses and genetic modifications. Two distinct types of primer are required for LAMP; hairpin-forming LAMP and displacement. High specificity arises from this use of multiple primers, but without optimal conditions for LAMP, sensitivity can be poor. We confirm here the importance of LAMP primer design, concentrations and ratios for efficient LAMP amplification. We further show that displacement primers are non-essential to the LAMP reaction at certain concentrations providing accelerating loop primers are present. We investigate various methods to quantify DNA extracts from GM maize certified reference materials to calculate the target copy numbers of template presented to the LAMP reaction, and show that LAMP can amplify transgenic promoter/terminator sequences in DNA extracted from various maize GM events using primers designed to target the 35S promoter (35Sp) or NOS terminator (NOSt) sequences, detection with both bioluminescence in real-time (BART) and fluorescent methods. With prior denaturation and HPLC grade LAMP primers single copy detection was achieved, showing that optimised LAMP conditions can be combined with BART for single copy targets, with simple and cost efficient light detection electronics over fluorescent alternatives.

Rapid Screening Detection of Genetically Modified Crops by Loop-Mediated Isothermal Amplification with a Lateral Flow Dipstick

We developed a novel loop-mediated isothermal amplification (LAMP)-based detection method using lateral flow dipstick chromatography for genetically modified (GM) soybean and maize events. The single-stranded tag hybridization (STH) for the chromatography printed-array strip (C-PAS) system was used for detections targeting the cauliflower mosaic virus 35S promoter, mannose-6-phosphate isomerase gene, Pisum sativum ribulose 1, 5-bisphosphate carboxylase terminator, a common sequence between the Cry1Ab and Cry1Ac genes, and a GA21-specific sequence. The STH C-PAS system was applicable for multiplex analyses to perform simultaneous detections. The limit of detection was 0.5% or less for each target. By using the developed method, the LAMP amplification was visually detected. Moreover, the detection could be carried out without any expensive instruments, even for the DNA amplification steps, by virtue of the isothermal reaction. We demonstrated that the rapid and useful method developed here would be applicable for screening GM crops.

Inter-laboratory validation of visual loop-mediated isothermal amplification assays for GM contents screening

Loop-mediated isothermal amplification (LAMP) has been widely used in many fields of molecular diagnostics, including detection of genetically modified organisms (GMOs). Herein, we report a collaborative ring trial validation of three established visual LAMP assays targeting three common GM elements, namely CaMV35S promoter, FMV35S promoter and NOS terminator, respectively. The high specificity of each assay was confirmed in different GM events analyses, and the sensitivity of each was determined to be 10, 10, and 50 haploid genome equivalents (HGEs) for CaMV35S promoter, FMV35S promoter, and NOS terminator, respectively. The probability of detection was also determined based on specificity and sensitivity data from 10 participating laboratories that returned correct results for the practical sample tests. These results demonstrate that the three visual LAMP assays are sensitive and time-saving, with high application potential for on-spot testing and routine screening of GMOs.

Panorama general de los organismos genéticamente modificados en Colombia y en el mundo: Capacidad nacional de detección

Los organismos genéticamente modificados (OGM) y en particular los cultivos genéticamente modificados (GM), son el resultado de la modificación de la información genética de una especie a partir del uso de la biotecnología moderna para proporcionar nuevas características que su contraparte no modificada no posee, tales como resistencia a insectos, tolerancia a herbicidas, contenido de nutrientes entre otros. La mayor parte de estos cultivos se concentran en cuatro productos: soya (Glycine max), maíz (Zea Mays), canola (Brassica napus) y algodón (Gossypium hirsutum); y los principales productores son Estados Unidos, Brasil, Argentina, India y Canadá. Por su parte, Colombia ocupa el puesto 18 con cultivos de maíz, algodón y claveles azules. La introducción de estas especies en cualquier mercado está limitada por la legislación propia del país destino, así como por los estudios que permiten establecer su efecto sobre el medio ambiente, la salud humana y animal; en este sentido, la precisión y confianza de las técnicas analíticas empleadas en la evaluación del contenido de OGM son un elemento importante para la toma de decisiones basadas en evidencias objetivas, especialmente frente al debate en torno a su uso. Este documento presenta una revisión de las tecnologías de análisis más importantes disponibles a nivel mundial, frente a las capacidades nacionales para su detección.

Development and evaluation of rapid screening detection methods for genetically modified crops using loop-mediated isothermal amplification

We developed new loop-mediated isothermal amplification (LAMP)-based detection methods for the screening of genetically modified (GM) maize and soybean events. The LAMP methods developed targeted seven sequences: cauliflower mosaic virus 35S promoter; 5-enolpyruvylshikimate-3-phosphate synthase gene from Agrobacterium tumefaciens strain CP4 (cp4epsps); phosphinothricin acetyltransferase (pat) gene; mannose-6-phosphate isomerase gene; Pisum sativum ribulose 1, 5-bisphosphate carboxylase terminator; a common sequence between Cry1Ab and Cry1Ac genes; and a GA21 construct-specific sequence. We designed new specific primer sets for each target, and the limit of detection (LOD) was evaluated using authorized GM maize and soybean events. LODs for each target were ≤ 0.5%. To make the DNA extraction process simple and rapid, we also developed a direct LAMP detection scheme using crude cell lysates. The entire process, including pretreatments and detection, could be completed within 1 h.

Critical assessment of digital PCR for the detection and quantification of genetically modified organisms

The number of genetically modified organisms (GMOs) on the market is steadily increasing. Because of regulation of cultivation and trade of GMOs in several countries, there is pressure for their accurate detection and quantification. Today, DNA-based approaches are more popular for this purpose than protein-based methods, and real-time quantitative PCR (qPCR) is still the gold standard in GMO analytics. However, digital PCR (dPCR) offers several advantages over qPCR, making this new technique appealing also for GMO analysis. This critical review focuses on the use of dPCR for the purpose of GMO quantification and addresses parameters which are important for achieving accurate and reliable results, such as the quality and purity of DNA and reaction optimization. Three critical factors are explored and discussed in more depth: correct classification of partitions as positive, correctly determined partition volume, and dilution factor. This review could serve as a guide for all laboratories implementing dPCR. Most of the parameters discussed are applicable to fields other than purely GMO testing. Graphical abstract There are generally three different options for absolute quantification of genetically modified organisms (GMOs) using digital PCR: droplet- or chamber-based and droplets in chambers. All have in common the distribution of reaction mixture into several partitions, which are all subjected to PCR and scored at the end-point as positive or negative. Based on these results GMO content can be calculated.

Closed tube loop-mediated isothermal amplification assay for rapid detection of hepatitis B virus in human blood

Recently, many studies have demonstrated the significant advantages of loop-mediated isothermal amplification (LAMP) based methods over serological tests and PCR for rapid detection of microbial pathogens. Here, a rapid LAMP assay was developed to detect the hepatitis B virus (HBV) from DNA, and particularly, blood samples from infected patients using a commercially available master mix and portable real-time fluorometer. The final optimized fluorescence-based LAMP assay provided significant amplification time of less than 15 minutes compared with over 1 hour for PCR and an opened tube LAMP system described previously. Results indicated that fluorescence-based LAMP assay was more sensitive than PCR as a rapid, sensitive, efficient, and highly reliable approach for rapid detection of HBV.

Molecular Approaches for High Throughput Detection and Quantification of Genetically Modified Crops: A Review

As long as the genetically modified crops are gaining attention globally, their proper approval and commercialization need accurate and reliable diagnostic methods for the transgenic content. These diagnostic techniques are mainly divided into two major groups, i.e., identification of transgenic (1) DNA and (2) proteins from GMOs and their products. Conventional methods such as PCR (polymerase chain reaction) and enzyme-linked immunosorbent assay (ELISA) were routinely employed for DNA and protein based quantification respectively. Although, these Techniques (PCR and ELISA) are considered as significantly convenient and productive, but there is need for more advance technologies that allow for high throughput detection and the quantification of GM event as the production of more complex GMO is increasing day by day. Therefore, recent approaches like microarray, capillary gel electrophoresis, digital PCR and next generation sequencing are more promising due to their accuracy and precise detection of transgenic contents. The present article is a brief comparative study of all such detection techniques on the basis of their advent, feasibility, accuracy, and cost effectiveness. However, these emerging technologies have a lot to do with detection of a specific event, contamination of different events and determination of fusion as well as stacked gene protein are the critical issues to be addressed in future.

Current perspectives on genetically modified crops and detection methods

Genetically modified (GM) crops are the fastest adopted commodities in the agribiotech industry. This market penetration should provide a sustainable basis for ensuring food supply for growing global populations. The successful completion of two decades of commercial GM crop production (1996-2015) is underscored by the increasing rate of adoption of genetic engineering technology by farmers worldwide. With the advent of introduction of multiple traits stacked together in GM crops for combined herbicide tolerance, insect resistance, drought tolerance or disease resistance, the requirement of reliable and sensitive detection methods for tracing and labeling genetically modified organisms in the food/feed chain has become increasingly important. In addition, several countries have established threshold levels for GM content which trigger legally binding labeling schemes. The labeling of GM crops is mandatory in many countries (such as China, EU, Russia, Australia, New Zealand, Brazil, Israel, Saudi Arabia, Korea, Chile, Philippines, Indonesia, Thailand), whereas in Canada, Hong Kong, USA, South Africa, and Argentina voluntary labeling schemes operate. The rapid adoption of GM crops has increased controversies, and mitigating these issues pertaining to the implementation of effective regulatory measures for the detection of GM crops is essential. DNA-based detection methods have been successfully employed, while the whole genome sequencing using next-generation sequencing (NGS) technologies provides an advanced means for detecting genetically modified organisms and foods/feeds in GM crops. This review article describes the current status of GM crop commercialization and discusses the benefits and shortcomings of common and advanced detection systems for GMs in foods and animal feeds.

PMA-LAMP for rapid detection of Escherichia coli and shiga toxins from viable but non-culturable state

In exposure to outer pressure, microorganisms are capable of entry into the Viable But Non-Culturable (VBNC) state, and thus survive under various elimination processing. The survival microorganisms may yield negative results on culturing, and cause false negative for this golden standard methodology. In this study, a novel PMA-LAMP assay on the detection of Enterohemorrhage E. coli and shiga toxins has been developed and evaluated, with further application on a number of food borne E. coli strains. LAMP primers were designed on the target of rfbe for Enterohemorrhage E. coli and stx1with stx2 for shiga toxins. Via specific penetration through the damaged cell membrane of dead cells and intercalating into DNA, PMA could prevent DNA amplification of dead bacteria from LAMP, which enabled the differentiation of bacteria between VBNC state and dead state. The established PMA-LAMP showed significant advantage in rapidity, sensitivity and specificity, compared with regular PCR assay. The applicability had also been verified, demonstrating the PMA-LAMP was capable of detection on Enterohemorrhage E. coli and shiga toxins.

Loop-Mediated Isothermal Amplification (LAMP): Emergence As an Alternative Technology for Herbal Medicine Identification

Correct identification of medicinal plant ingredients is essential for their safe use and for the regulation of herbal drug supply chain. Loop-mediated isothermal amplification (LAMP) is a recently developed approach to identify herbal medicine species. This novel molecular biology technique enables timely and accurate testing, especially in settings where infrastructures to support polymerase chain reaction facilities are lacking. Studies that used this method have altered our view on the extent and complexity of herbal medicine identification. In this review, we give an introduction into LAMP analysis, covers the basic principles and important aspects in the development of LAMP analysis method. Then we presented a critical review of the application of LAMP-based methods in detecting and identifying raw medicinal plant materials and their processed products. We also provide a practical standard operating procedure (SOP) for the utilization of the LAMP protocol in herbal authentication, and consider the prospects of LAMP technology in the future developments of herbal medicine identification and the challenges associated with its application.

Detection of Bar Transgenic Sugarcane with a Rapid and Visual Loop-Mediated Isothermal Amplification Assay

Genetic engineering offers an attractive alternative in sugarcane breeding for increasing cane and sugar yields as well as disease and insect resistance. Bar transgenic sugarcane employing the herbicide tolerance is a useful agronomical trait in weed control. In this study, a loop-mediated isothermal amplification (LAMP) assay for rapid detection of the bar gene in transgenic sugarcane has been developed and evaluated. A set of six primers was designed for LAMP-based amplification of the bar gene. The LAMP reaction conditions were optimized as follows: 5.25 mM of Mg(2+), 6:1 ratio of inner vs. outer primer, and 6.0 U of Bst DNA polymerase in a reaction volume of 25.0 μL. The detection limit of the recombinant plasmid 1Ac0229 was as low as 10 copies in the developed LAMP, which was 10-fold higher sensitive than that of conventional PCR. In 100 putative transgenic lines, the bar gene was detected in 100/100 cases (100%) by LAMP and 97/100 cases (97%) by conventional PCR, respectively. In conclusion, the developed LAMP assay is visual, rapid, sensitive, reliable, and cost-effective for detection of the bar specific transgenic sugarcane.

Real-time electrochemical LAMP: a rational comparative study of different DNA intercalating and non-intercalating redox probes

The main objective of this study is provide guidelines in the search for ideal redox-active reporters in real-time electrochemical LAMP.

Perspectives on genetically modified crops and food detection

Genetically modified (GM) crops are a major product of the global food industry. From 1996 to 2014, 357 GM crops were approved and the global value of the GM crop market reached 35% of the global commercial seed market in 2014. However, the rapid growth of the GM crop-based industry has also created controversies in many regions, including the European Union, Egypt, and Taiwan. The effective detection and regulation of GM crops/foods are necessary to reduce the impact of these controversies. In this review, the status of GM crops and the technology for their detection are discussed. As the primary gap in GM crop regulation exists in the application of detection technology to field regulation, efforts should be made to develop an integrated, standardized, and high-throughput GM crop detection system. We propose the development of an integrated GM crop detection system, to be used in combination with a standardized international database, a decision support system, high-throughput DNA analysis, and automated sample processing. By integrating these technologies, we hope that the proposed GM crop detection system will provide a method to facilitate comprehensive GM crop regulation.

Current and new approaches in GMO detection: challenges and solutions

In many countries, genetically modified organisms (GMO) legislations have been established in order to guarantee the traceability of food/feed products on the market and to protect the consumer freedom of choice. Therefore, several GMO detection strategies, mainly based on DNA, have been developed to implement these legislations. Due to its numerous advantages, the quantitative PCR (qPCR) is the method of choice for the enforcement laboratories in GMO routine analysis. However, given the increasing number and diversity of GMO developed and put on the market around the world, some technical hurdles could be encountered with the qPCR technology, mainly owing to its inherent properties. To address these challenges, alternative GMO detection methods have been developed, allowing faster detections of single GM target (e.g., loop-mediated isothermal amplification), simultaneous detections of multiple GM targets (e.g., PCR capillary gel electrophoresis, microarray, and Luminex), more accurate quantification of GM targets (e.g., digital PCR), or characterization of partially known (e.g., DNA walking and Next Generation Sequencing (NGS)) or unknown (e.g., NGS) GMO. The benefits and drawbacks of these methods are discussed in this review.

Multiplex electrochemical DNA platform for femtomolar-level quantification of genetically modified soybean

Current EU regulations on the mandatory labeling of genetically modified organisms (GMOs) with a minimum content of 0.9% would benefit from the availability of reliable and rapid methods to detect and quantify DNA sequences specific for GMOs. Different genosensors have been developed to this aim, mainly intended for GMO screening. A remaining challenge, however, is the development of genosensing platforms for GMO quantification, which should be expressed as the number of event-specific DNA sequences per taxon-specific sequences. Here we report a simple and sensitive multiplexed electrochemical approach for the quantification of Roundup-Ready Soybean (RRS). Two DNA sequences, taxon (lectin) and event-specific (RR), are targeted via hybridization onto magnetic beads. Both sequences are simultaneously detected by performing the immobilization, hybridization and labeling steps in a single tube and parallel electrochemical readout. Hybridization is performed in a sandwich format using signaling probes labeled with fluorescein isothiocyanate (FITC) or digoxigenin (Dig), followed by dual enzymatic labeling using Fab fragments of anti-Dig and anti-FITC conjugated to peroxidase or alkaline phosphatase, respectively. Electrochemical measurement of the enzyme activity is finally performed on screen-printed carbon electrodes. The assay gave a linear range of 2-250 pM for both targets, with LOD values of 650 fM (160 amol) and 190 fM (50 amol) for the event-specific and the taxon-specific targets, respectively. Results indicate that the method could be applied for GMO quantification below the European labeling threshold level (0.9%), offering a general approach for the rapid quantification of specific GMO events in foods.

Development of a loop-mediated isothermal amplification assay for rapid, sensitive detection of Campylobacter jejuni in cattle farm samples

Campylobacter jejuni is a leading cause of bacterial foodborne disease worldwide. The detection of this organism in cattle and their environment is important for the control of C. jejuni transmission and the prevention of campylobacteriosis. Here, we describe the development of a rapid and sensitive method for the detection of C. jejuni in naturally contaminated cattle farm samples, based on real-time loop-mediated isothermal amplification (LAMP) of the hipO gene. The LAMP assay was specific (100% inclusivity and exclusivity for 84 C. jejuni and 41 non-C. jejuni strains, respectively), sensitive (detection limit of 100 fg/μl), and quantifiable (R(2) = 0.9133). The sensitivity of the LAMP assay was then evaluated for its application to the naturally contaminated cattle farm samples. C. jejuni strains were isolated from 51 (20.7%) of 246 cattle farm samples, and the presence of the hipO gene was tested using the LAMP assay. Amplification of the hipO gene by LAMP within 30 min (mean ~10.8 min) in all C. jejuni isolates (n = 51) demonstrated its rapidity and accuracy. Next, template DNA was prepared from a total of 186 enrichment broth cultures of cattle farm samples either by boiling or using a commercial kit, and the sensitivity of detection of C. jejuni was compared between the LAMP and PCR assays. In DNA samples prepared by boiling, the higher sensitivity of the LAMP assay (84.4%) compared with the PCR assay (35.5%) indicates that it is less susceptible to the existence of inhibitors in sample material. In DNA samples prepared using a commercial kit, both the LAMP and PCR assays showed 100% sensitivity. We anticipate that the use of this rapid, sensitive, and simple LAMP assay, which is the first of its kind for the identification and screening of C. jejuni in cattle farm samples, may play an important role in the prevention of C. jejuni contamination in the food chain, thereby reducing the risk of human campylobacteriosis.

Development and application of loop-mediated isothermal amplification assays for rapid visual detection of cry2Ab and cry3A genes in genetically-modified crops

The cry2Ab and cry3A genes are two of the most important insect-resistant exogenous genes and had been widely used in genetically-modified crops. To develop more effective alternatives for the quick identification of genetically-modified organisms (GMOs) containing these genes, a rapid and visual loop-mediated isothermal amplification (LAMP) method to detect the cry2Ab and cry3A genes is described in this study. The LAMP assay can be finished within 60 min at an isothermal condition of 63 °C. The derived LAMP products can be obtained by a real-time turbidimeter via monitoring the white turbidity or directly observed by the naked eye through adding SYBR Green I dye. The specificity of the LAMP assay was determined by analyzing thirteen insect-resistant genetically-modified (GM) crop events with different Bt genes. Furthermore, the sensitivity of the LAMP assay was evaluated by diluting the template genomic DNA. Results showed that the limit of detection of the established LAMP assays was approximately five copies of haploid genomic DNA, about five-fold greater than that of conventional PCR assays. All of the results indicated that this established rapid and visual LAMP assay was quick, accurate and cost effective, with high specificity and sensitivity. In addition, this method does not need specific expensive instruments or facilities, which can provide a simpler and quicker approach to detecting the cry2Ab and cry3A genes in GM crops, especially for on-site, large-scale test purposes in the field.

GMO quantification: valuable experience and insights for the future

Cultivation and marketing of genetically modified organisms (GMOs) have been unevenly adopted worldwide. To facilitate international trade and to provide information to consumers, labelling requirements have been set up in many countries. Quantitative real-time polymerase chain reaction (qPCR) is currently the method of choice for detection, identification and quantification of GMOs. This has been critically assessed and the requirements for the method performance have been set. Nevertheless, there are challenges that should still be highlighted, such as measuring the quantity and quality of DNA, and determining the qPCR efficiency, possible sequence mismatches, characteristics of taxon-specific genes and appropriate units of measurement, as these remain potential sources of measurement uncertainty. To overcome these problems and to cope with the continuous increase in the number and variety of GMOs, new approaches are needed. Statistical strategies of quantification have already been proposed and expanded with the development of digital PCR. The first attempts have been made to use new generation sequencing also for quantitative purposes, although accurate quantification of the contents of GMOs using this technology is still a challenge for the future, and especially for mixed samples. New approaches are needed also for the quantification of stacks, and for potential quantification of organisms produced by new plant breeding techniques.

Sensitive detection of Xanthomonas oryzae Pathovars oryzae and oryzicola by loop-mediated isothermal amplification

Molecular diagnostics for crop diseases can enhance food security by enabling the rapid identification of threatening pathogens and providing critical information for the deployment of disease management strategies. Loop-mediated isothermal amplification (LAMP) is a PCR-based tool that allows the rapid, highly specific amplification of target DNA sequences at a single temperature and is thus ideal for field-level diagnosis of plant diseases. We developed primers highly specific for two globally important rice pathogens, Xanthomonas oryzae pv. oryzae, the causal agent of bacterial blight (BB) disease, and X. oryzae pv. oryzicola, the causal agent of bacterial leaf streak disease (BLS), for use in reliable, sensitive LAMP assays. In addition to pathovar distinction, two assays that differentiate X. oryzae pv. oryzae by African or Asian lineage were developed. Using these LAMP primer sets, the presence of each pathogen was detected from DNA and bacterial cells, as well as leaf and seed samples. Thresholds of detection for all assays were consistently 10(4) to 10(5) CFU ml(-1), while genomic DNA thresholds were between 1 pg and 10 fg. Use of the unique sequences combined with the LAMP assay provides a sensitive, accurate, rapid, simple, and inexpensive protocol to detect both BB and BLS pathogens.

Multitarget real-time PCR-based system: monitoring for unauthorized genetically modified events in India

A multitarget TaqMan real-time PCR (RTi-PCR) based system was developed to monitor unauthorized genetically modified (GM) events in India. Most of the GM events included in this study are either authorized for commercial cultivation or field trials, which were indigenously developed or imported for research purposes. The developed system consists of a 96-well prespotted plate with lyophilized primers and probes, for simultaneous detection of 47 targets in duplicate, including 21 event-specific sequences, 5 construct regions, 15 for transgenic elements, and 6 taxon-specific targets for cotton, eggplant, maize, potato, rice, and soybean. Limit of detection (LOD) of assays ranged from 0.1 to 0.01% GM content for different targets. Applicability, robustness, and practical utility of the developed system were verified with stacked GM cotton event, powdered samples of proficiency testing and two unknown test samples. This user-friendly multitarget approach can be efficiently utilized for monitoring the unauthorized GM events in an Indian context.