Simultaneous determination of multiple (fluoro)quinolone antibiotics in food samples by a one-step fluorescence polarization immunoassay

Veterinary Drug Residues in the Food Chain as an Emerging Public Health Threat: Sources, Analytical Methods, Health Impacts, and Preventive Measures

Veterinary medications are necessary for both contemporary animal husbandry and food production, but their residues can linger in foods obtained from animals and pose a dangerous human risk. In this review, we aim to highlight the sources, occurrence, human exposure pathways, and human health effects of drug residues in food-animal products. Following the usage of veterinary medications, pharmacologically active compounds known as drug residues can be found in food, the environment, or animals. They can cause major health concerns to people, including antibiotic resistance development, the development of cancer, teratogenic effects, hypersensitivity, and disruption of normal intestinal flora. Drug residues in animal products can originate from variety of sources, including water or food contamination, extra-label drug use, and ignoring drug withdrawal periods. This review also examines how humans can be exposed to drug residues through drinking water, food, air, and dust, and discusses various analytical techniques for identifying these residues in food. Furthermore, we suggest some potential solutions to prevent or reduce drug residues in animal products and human exposure pathways, such as implementing withdrawal periods, monitoring programs, education campaigns, and new technologies that are crucial for safeguarding public health. This review underscores the urgency of addressing veterinary drug residues as a significant and emerging public health threat, calling for collaborative efforts from researchers, policymakers, and industry stakeholders to develop sustainable solutions that ensure the safety of the global food supply chain.

Fluorescence Polarization Assay Based on a New Recognition Motif QepA for the One-Step Detection of Fluoroquinolones in Eggs

A recognition motif is vital in determining the specificity and sensitivity of the fluorescence polarization assay (FPA) for detecting chemical contaminants in food. Four candidates (Gyrase, GyrBA, TopIV, and QepA) were prepared for this study. The applicability of QepA was confirmed through DNA cleavage assay, inhibition effects, and mechanism investigations using molecular docking, compared to other counterparts. Finally, a novel FPA based on QepA and a CIP-FITC tracer for the detection of fluoroquinolones (FQs) in eggs was developed. The limits of detection (LODs) for eight fluoroquinolones ranged from 2.2 to 5.1 ng g-1, with enrofloxacin, danofloxacin, and difloxacin meeting the maximum residue limits (MRLs). The spiked recoveries ranged from 65.8 to 103.6% with coefficients of variation (CVs) of 5.4-12.8%. Therefore, a new recognition motif for FQs that did not belong to conventional antibodies was identified, and QepA-based FPA could be a potential tool for rapid, homogeneous, and sensitive monitoring of the residue of FQs in eggs.

A Robust Homogeneous Fluorescence Polarization Immunoassay for Rapid Determination of Erythromycin in Milk

Erythromycin (ERY) is one of the most common macrolides applied in veterinary medicine to treat diseases or as a feed additive for animal growth promotion. Long-term irrational use of ERY could lead to residues in animal-derived food and the emergence of drug-resistant strains, posing potential threats to human health. In this study, a highly sensitive, specific, robust, and rapid fluorescence polarization immunoassay (FPIA) for the determination of ERY in milk has been described. Herein, to achieve high sensitivity, five tracers of ERY with different fluorescein structures were synthesized and paired with three monoclonal antibodies (mAbs). Under the optimized conditions, the combination of mAb 5B2 and tracer ERM-FITC achieved the lowest IC₅₀ value in the FPIA with 7.39 μg/L for ERM. The established FPIA was used to detect ERY in milk, revealing a limit of detection (LOD) of 14.08 μg/L with recoveries of 96.08-107.77% and coefficients of variations (CVs) of 3.41-10.97%. The total detection time of the developed FPIA was less than 5 min from the addition of samples to the result readout. All the above results showed that the proposed FPIA in this study was a rapid, accurate, and simple method for the screening of ERY in milk samples.

Dual-Wavelength Fluorescence Polarization Immunoassay for Simultaneous Detection of Sulfonamides and Antibacterial Synergists in Milk

Combinations of sulfonamides (SAs) and antibacterial synergists (ASGs) are frequently used for treating infectious diseases and promoting growth for animals, which cause potential hazards to food safety and human health. To realize the simultaneous detection of SAs and ASGs in food, a homogeneous and high-throughput screening dual-wavelength fluorescence polarization immunoassay (DWFPIA) was developed. In this study, three SAs tracers and three ASGs tracers were synthesized by fluoresceins with different linkers and paired with their corresponding monoclonal antibodies (mAbs), respectively. To achieve a high sensitivity and broad specificity, the combination of tracers SADMPM-HDF with the longest linker paring mAb 10E6 for SAs and tracer HaptenA-DSCA paring mAb 9C9 for ASGs were chosen for the development of DWFPIA, achieving surprising IC₅₀ values for 23 SAs below 100 μg L^-1 and 5 ASGs below 50 μg L^-1. The accuracy of DWFPIA was applied in real milk samples by typical sulfamethazine (SMZ) and trimethoprim (TMP), with recoveries of 81.7-97.2% and 78.6-103.6%, and coefficient of variations (CVs) below 18.9%, which could be completed within 15 min, including sample pretreatment. We firstly developed a simultaneous screening DWFPIA, covering all of the SAs and ASGs used in clinic and providing a great application potential in food safety analysis.

Development of a Dihydropteroate Synthase-Based Fluorescence Polarization Assay for Detection of Sulfonamides and Studying Its Recognition Mechanism

In this study, the dihydropteroate synthase of Staphylococcus aureus was obtained, and its recognition mechanisms for 31 sulfonamide drugs were studied. Results showed that their core structure matched well with the binding pocket of para-aminobenzoic acid, and all the sulfonamide side chains were out of the binding pocket. Hydrogen bonds and hydrophobic interactions were the main intermolecular forces, and the key amino acids were Gly171 and Lys203. The binding sites in sulfonamide molecules were mainly around the para-aminobenzenesulfonamide part. This enzyme was used to develop a fluorescence polarization assay for detection of these drugs in chicken muscles. The change trends of half of inhibition concentrations and cross-reactivities for the 31 drugs were identical with the receptor-ligand affinities. The limits of detection were in the range of 2.0-38.5 ng/g, and one assay could be finished within several minutes. Therefore, this method could be used for multiscreening of sulfonamide residues in meat samples.

Synthesis and characterization of tracers and development of a fluorescence polarization immunoassay for amantadine with high sensitivity in chicken

Fluorescence polarization immunoassay (FPIA) is a homogeneous and rapid analytical method that is suitable for high-throughput screening of large numbers of samples. However, FPIA typically suffers from lower sensitivity than the well-established enzyme-linked immunosorbent assay (ELISA), limiting its wide application as an analytical tool that can be run with trace levels of an analyte. Herein, a highly sensitive FPIA for detecting amantadine (AMD) in chicken is described. To achieve high sensitivity, nine chemical tracers of AMD that employ different fluoresceins, fluorescein derivatives, and haptens were synthesized and paired with four previously produced monoclonal antibodies (mAbs). The effect of the tracer structure on the sensitivity of FPIA was investigated and discussed. We found that the tracers with a linear and shorter bridge between adamantane and fluorescein generally provided higher sensitivity. After optimization, N'-(1-adamantyl) ethylenediamine (AEDA), an AMD structural analogue labeled with fluorescein isothiocyanate (FITC), achieved the lowest IC₅₀ value (1.0 ng/ml) in the FPIA, which was comparable to that of the heterologous ELISA format that used the same mAb7G2. We also investigated the possible recognition mechanism of mAbs in terms of conformational and electronic aspects. The developed FPIA was applied to chicken to detect AMD residue, demonstrating a limit of detection (LOD) of 0.9 µg/kg with recoveries of 76.5-89.3% and coefficients of variation (CVs) below 14.5%. These results show that the proposed FPIA is an efficient, accurate, and convenient method for the rapid screening of AMD residues in chicken. PRACTICAL APPLICATION: The fluorescence polarization immunoassay (FPIA) was developed to determine and quantify amantadine (AMD) in chicken samples with high sensitivity. This homogeneous method avoids coating and washing steps and may provide high-throughput AMD screening in chicken in 10 min with high accuracy and precision. FPIA can be used as a monitoring tool and contribute significantly to the rapid detection of AMD in chicken.

Design, Synthesis, and Characterization of Tracers and Development of a Fluorescence Polarization Immunoassay for Rapid Screening of 4,4'-Dinitrocarbanilide in Chicken Muscle

The compound, 4,4′-dinitrocarbanilide (DNC), is the marker residue of concern in edible tissues of broilers fed with diets containing anticoccidial nicarbazin (NIC). In this study, 25 fluorescein-labeled DNC derivatives (tracers) are synthesized and characterized to develop a rapid fluorescence polarization immunoassay (FPIA) for the detection of DNC in chickens using DNC monoclonal antibodies (mAbs). The effect of the tracer structure on the sensitivity of the FPIA is investigated. Our results show that after optimization, the half maximal inhibitory concentrations (IC₅₀) and limit of detection (LOD) of the FPIA in the buffer are 28.3 and 5.7 ng mL⁻¹, respectively. No significant cross-reactivity (CR < 0.89%) with 15 DNC analogues is observed. The developed FPIA is validated for DNC detection in spiked chicken homogenates, and recoveries ranged from 74.2 to 85.8%, with coefficients of variation <8.6%. Moreover, the total time needed for the detection procedure of the FPIA, including sample pretreatment, is <40 min, which has not been achieved in any other immunoassays for DNC from literature. Our results demonstrate that the FPIA developed here is a simple, sensitive, specific, and reproducible screening method for DNC residues in chickens.

Synthesis of molecularly imprinted microspheres and development of a fluorescence method for detection of chloramphenicol in meat

In this study, nitrobenzene was used as dummy template to synthesize a type of specific molecularly imprinted microspheres for chloramphenicol, and 4-nitroaniline was coupled with three fluorophores to synthesize three fluorescent tracers. Then a competitive fluorescence method was developed on a conventional microplate for detection of chloramphenicol in chicken and pork samples. This method contained only one sample-loading step, so one assay was finished within 30 min. The IC₅₀ was 1.8 ng/ml, and the limit of detection was 0.06 ng/g. The recoveries from chloramphenicol-fortified blank meat samples were in the range 67.5-96.2%. Furthermore, this method could be recycled three times. The detection results for some real meat samples were identical to that of a LC-MS/MS method. Therefore, this method could be used as a practical tool for routine screening for the residue of chloramphenicol in large number of meat samples.

Development of a molecularly imprinted microspheres-based microplate fluorescence method for detection of amantadine and rimantadine in chicken

In this study, molecularly imprinted microspheres of a type capable of recognising amantadine and rimantadine were first synthesised, and three fluorescent tracers based on dansyl chloride, fluorescein isothiocyanate and 5-carboxytetramethylrhodamine were also synthesised. These reagents were used to develop and optimise a direct competitive fluorescence method on conventional 96-well microplate for detection of the two analytes. Results showed that this method achieved simple operation procedure, rapid assay process (30 min), high sensitivity (limits of detection 0.04-0.05 ng mL^-1) and acceptable recycle performance (five times). After optimisation of several parameters, this method was used to detect amantadine and rimantadine in chicken muscle samples. Their recoveries from standards fortified blank samples were in the range of 62.3-93.7%. The analysis results for some real chicken samples were consistent with a confirmatory LC-MS/MS method. Therefore, this method could be used as a rapid, simple and accurate tool for routine screening the residues of amantadine and rimantadine in a large number of chicken muscle samples.

Fluorescence Polarization-Based Bioassays: New Horizons

Fluorescence polarization holds considerable promise for bioanalytical systems because it allows the detection of selective interactions in real time and a choice of fluorophores, the detection of which the biosample matrix does not influence; thus, their choice simplifies and accelerates the preparation of samples. For decades, these possibilities were successfully applied in fluorescence polarization immunoassays based on differences in the polarization of fluorophore emissions excited by plane-polarized light, whether in a free state or as part of an immune complex. However, the results of recent studies demonstrate the efficacy of fluorescence polarization as a detected signal in many bioanalytical methods. This review summarizes and comparatively characterizes these developments. It considers the integration of fluorescence polarization with the use of alternative receptor molecules and various fluorophores; different schemes for the formation of detectable complexes and the amplification of the signals generated by them. New techniques for the detection of metal ions, nucleic acids, and enzymatic reactions based on fluorescence polarization are also considered.

Development of Fluorescence Polarization Immunoassay for Imidacloprid in Environmental and Agricultural Samples

A fluorescence polarization immunoassay (FPIA) for the determination of imidacloprid (IMI) was developed with advantages of simple operation and short assay time. The haptens of IMI, acetamiprid (ACE), and thiamethoxam (THI) were conjugated with fluorescein isothiocyanate ethylenediamine (EDF) and 4'-Aminomethyl fluorescein (AMF), respectively, to prepare six fluorescence tracers. The conjugation of IMI hapten and EDF (IMI-EDF) was selected to develop the FPIA due to the largest fluorescent polarization value increase in the presence of anti-IMI monoclonal antibody. Under the optimum condition, the limit of detection, 50% inhibition concentration and detection range of the FPIA were 1.7, 4.8, and 1.7-16.3 μg/L, respectively. The cross-reactivities (CRs) with the analogs of IMI were negligible except for imidaclothiz with CR of 79.13%. The average recovery of spiked paddy water, corn and cucumber samples were 82.4-118.5% with the RSDs of 7.0-15.9%, which indicated the FPIA had good accuracy. Thus, the developed FPIA was a potential tool for the rapid and accurate determination of IMI in agricultural and environmental samples.

Quantitative ciprofloxacin on-site rapid detections using quantum dot microsphere based immunochromatographic test strips

The ciprofloxacin (CIP) abuse has caused many problems threatening to human health. Here, we design the quantum dot microsphere (QDM) based immunochromatographic quantitative CIP test strip: when the sample under detection contains CIP, the QDM-monoclonal antibody (mAb) probes bound with the CIP and cannot be captured by CIP-bovine serum albumin (BSA) conjugation dispersed on the T lines, reducing the fluorescence intensities. These test strips can provide a low detection limit of 0.05 ng/mL and a wide linear detection range from 0.1 ng/mL to 100 ng/mL in high sensitivity and accuracy as well as good selectivity, reproducibility and stability. Moreover, a smartphone based test strip reader with the size of 85 mm × 48 mm × 44 mm is also fabricated using 3-D printing to automatically and quantitatively detect CIP. The whole process of CIP detection can be finished within 15 min, but only cost ~1 RMB (10 cents).

Molecularly imprinted microspheres based multiplexed fluorescence method for simultaneous detection of benzimidazoles and pyrethroids in meat samples

Two molecularly imprinted microspheres and two fluorescent tracers for benzimidazoles and pyrethroids were synthesized respectively. The two types of microspheres were coated in the wells of conventional microplate simultaneously. Then the sample extracts and the two traces were added for differential competition. The fluorescence intensities at two different emission wavelengths were excited and recorded for quantification of the two classes of drugs respectively. The optimized multiplexed fluorescence method could be used to determine 8 benzimidazoles and 10 pyrethroids in mutton and beef samples simultaneously. The limits of detection of the method for the 18 drugs were in the range of 5.2-17 ng/mL, and the recoveries from the standards fortified blank samples were in the range of 67.7%-109%. From the analysis of 60 real mutton and beef samples, this method could be used for multi-screening the residues of benzimidazoles and pyrethroids in meat samples.

Fluorescence Polarization Immunoassay for Determination of Enrofloxacin in Pork Liver and Chicken

Enrofloxacin (ENR) is a widely used fluoroquinolone (FQ) antibiotic for antibacterial treatment of edible animal. In this study, a rapid and highly specific fluorescence polarization immunoassay (FPIA) was developed for monitoring ENR residues in animal foods. First, ENR was covalently coupled to bovine serum albumin (BSA) to produce specific polyclonal antibodies (pAbs). Three fluorescein-labeled ENR tracers (A, B, and C) with different spacers were synthesized and compared to obtain higher sensitivity. Tracer C with the longest arm showed the best sensitivity among the three tracers. The developed FPIA method showed an IC₅₀ (50% inhibitory concentration) of 21.49 ng·mL⁻¹ with a dynamic working range (IC₂₀–IC₈₀) of 4.30–107.46 ng·mL⁻¹ and a limit of detection (LOD, IC₁₀) of 1.68 ng·mL⁻¹. The cross-reactivity (CR) of several structurally related compounds was less than 2%. The recoveries of spiked pork liver and chicken samples varied from 91.3% to 112.9%, and the average coefficients of variation were less than 3.83% and 5.13%, respectively. The immunoassay took only 8 min excluding sample pretreatment. This indicated that the established method had high sensitivity, specificity, and the advantages of simplicity. Therefore, the proposed FPIA provided a useful screening method for the rapid detection of ENR residues in pork liver and chicken.

Amplified colorimetric detection of tetracycline based on an enzyme-linked aptamer assay with multivalent HRP-mimicking DNAzyme

Tetracycline (TC) is widely used to treat bacterial infections in humans and animals due to its low price and good antibacterial properties. The abuse of tetracycline has led to TC residues in daily food that could seriously affect human health. Thus, it is imperative to develop highly sensitive and selective methods for TC detection. In this work, we developed a colorimetric method for TC detection based on an enzyme-linked aptamer assay (ELAA) with multivalent HRP-mimicking DNAzyme. An aptamer was used as an alternative recognition element in the enzyme-linked immunosorbent assay (ELISA). Multivalent HRP-mimicking DNAzyme, assembled via hybridization chain reactions (HCR), was used for catalytic substrate color rendering in ELAA. The multivalent HRP-mimicking DNAzyme exhibited enhanced catalytic capacity and improved the detection sensitivity greatly. The limit of detection was 8.1 × 10-2 ng mL-1 with a linear range from 1.0 × 10-2 ng mL-1 to 1.0 × 104 ng mL-1 toward TC in buffer. To challenge the practical application capability of this strategy, the detection of TC in milk samples was also investigated and showed similar linear relationships. Due to the introduction of an aptamer, this ELAA strategy shows high selectivity towards TC and has potential for the detection of a wide spectrum of analytes.

Antibiotic residues in milk: Past, present, and future

Now-a-days, various types of antibiotics are being used worldwide in veterinary sector indiscriminately for promotion of growth and treatment of the livestock. Significant portions of antibiotics are released through milk of dairy animals unaltered and exert serious harmful effects on human health. This review evaluates and compare researches on antibiotic residues in milk in published literatures from Pubmed, CrossRef, CAB direct, DOAJ, JournalTOCs, AGRICOLA, ScientificGate, Electronic Journals Library, CAB abstracts, Global Health Databases, Global Impact Factor, Google Scholar, Park Directory of Open Access Journals, BanglaJOL and ISC E-Journals. Antibiotics residue in milk was first detected in 60s and then with an increasing trend with highest after 2,000 (188). The highest no. of works, 49 (21.87%) were accomplished in China, followed by Spain, 30 (13.39%); Germany, 11 (4.91%); and USA, 10 (4.46%). Continent-wise highest researches are published from Europe, 105 (46.88%), followed by Asia, 77 (34.38%); South America, 18 (8.04%); North America, 16 (7.14%); and Africa, 8 (3.57%). For detection, Bovine milk sample is mostly used, 193 (86.16%), followed by ovine, 19 (8.48%); and caprine, 14 (6.25%). Acetonitrile was used in maximum cases (77) for processing the samples. Chromatographic technique was the highest, 115 (51.34%) for detection. Residue of β-lactam group have been detected mostly 133 (36.54%), followed by tetracyclines, 51 (14.01%); fluoroquinolones, 49 (13.46%); sulfonamides, 46 (12.64%); and aminoglycosides, 38 (10.44%). This review observe that antibiotics residues are more common in milk samples that are being manifested in increasing researches on antibiotic detection and measures should adopt to cease this residue.

Broad-Specificity Chemiluminescence Enzyme Immunoassay for (Fluoro)quinolones: Hapten Design and Molecular Modeling Study of Antibody Recognition

On the basis of the structural features of (fluoro)quinolones (FQs), pazufloxacin was first used as a generic immunizing hapten to raise a broad-specificity antibody. The obtained polyclonal antibody exhibited broad cross-reactivity ranging from 5.19% to 478.77% with 21 FQs. Furthermore, the antibody was able to recognize these FQs below their maximum residue limits (MRLs) in an indirect competitive chemiluminescence enzyme immunoassay (ic-CLEIA), with the limit of detection (LOD) ranging from 0.10 to 33.83 ng/mL. For simply pretreated milk samples with spiked FQs, the ic-CLEIA exhibited an excellent recovery with a range of 84.6-106.9% and an acceptable coefficient of variation below 15%, suggesting its suitability and reliability for the use of a promising tool to detect FQs. Meanwhile, comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) models, with statistically significant correlation coefficients (q(2)CoMFA = 0.559, r(2)CoMFA = 0.999; q(2)CoMSIA = 0.559, r(2)CoMSIA = 0.994), were established to investigate the antibody recognition mechanism. These two models revealed that in the antibody, the active cavity binding FQs' 7-position substituents worked together with another cavity (binding FQs' 1-position groups) to crucially endow the high cross-reactivity. This investigation will be significant for better exploring the recognition mechanism and for designing new haptens.

General Bioluminescence Resonance Energy Transfer Homogeneous Immunoassay for Small Molecules Based on Quantum Dots

Here, we describe a general bioluminescence resonance energy transfer (BRET) homogeneous immunoassay based on quantum dots (QDs) as the acceptor and Renilla luciferase (Rluc) as the donor (QD-BRET) for the determination of small molecules. The ratio of the donor-acceptor that could produce energy transfer varied in the presence of different concentrations of free enrofloxacin (ENR), an important small molecule in food safety. The calculated Förster distance (R0) was 7.86 nm. Under optimized conditions, the half-maximal inhibitory concentration (IC50) for ENR was less than 1 ng/mL and the linear range covered 4 orders of magnitude (0.023 to 25.60 ng/mL). The cross-reactivities (CRs) of seven representative fluoroquinolones (FQs) were similar to the data obtained by an enzyme-linked immunosorbent assay (ELISA). The average intra- and interassay recoveries from spiked milk of were 79.8-118.0%, and the relative standard deviations (RSDs) were less than 10%, meeting the requirement of residue detection, which was a satisfactory result. Furthermore, we compared the influence of different luciferase substrates on the performance of the assay. Considering sensitivity and stability, coelenterazine-h was the most appropriate substrate. The results from this study will enable better-informed decisions on the choice of Rluc substrate for QD-BRET systems. For the future, the QD-BRET immunosensor could easily be extended to other small molecules and thus represents a versatile strategy in food safety, the environment, clinical diagnosis, and other fields.

Heterologous strategy enhancing the sensitivity of the fluorescence polarization immunoassay of clinafloxacin in goat milk

BACKGROUND

Clinafloxacin is used for the treatment of disease in food-producing animals, e.g. Brucella melitensis, which often occurs in goats; however, the clinafloxacin residue in goat milk may harm human health and result in the development of drug-resistant bacterial strains or allergies. Despite this, there is not a rapid, sensitive and accurate analytical method in goat milk for rapid screening or monitoring purposes.

RESULTS

One homologous and five heterologous tracers were designed and compared for fluorescence polarization immunoassay (FPIA) optimization. Based on the combination of a heterologous tracer (PAZ-FITC, synthesized with pazufloxacin and FITC) and the antibody against clinafloxacin, a highly sensitive FPIA was established for the detection of clinafloxacin residue in goat milk for the first time. The IC50 value was 29.3 µg L(-1) for clinafloxacin in the heterologous format - six times lower than that of the combination of the homologous tracers and the antibody. The recoveries ranged from 86.8% to 104.5%, with the relative standard deviation ranging from 4.1% to 7.2%. Validation by high-performance liquid chromatography (HPLC) confirmed that the results obtained from the proposed FPIA were in agreement with those of HPLC.

CONCLUSION

This proposed heterologous strategy for enhanced FPIA is sensitive and rapid enough for the high-throughput detection of clinafloxacin residue in goat milk.

A universal multi-wavelength fluorescence polarization immunoassay for multiplexed detection of mycotoxins in maize

Multi-analyte immunoassays have attracted increasing attention due to their short assay times, low sample consumption, and reduced detection costs per assay. In this work, we describe a homologous and high-throughput multi-wavelength fluorescence polarization immunoassay (MWFPIA) for the multiplexed detection of mycotoxins. Three typical Fusarium mycotoxins, deoxynivalenol (DON), T-2 toxin and fumonisin B1 (FB1), were labeled with different dyes. Tracers and specific monoclonal antibodies (mAbs) were employed in the MWFPIA to simultaneously detect the three mycotoxins. Under optimal conditions, the limits of detection using MWFPIA were 242.0 μg kg(-1) for DON, 17.8 μg kg(-1) for T-2 toxin and 331.5 μg kg(-1) for FB1, providing sufficient sensitivity to meet the action levels of these three contaminants in maize as set by the European Union. The use of a methanol/water (2:3, v/v) mixture for sample pretreatment allowed recoveries ranging from 76.5-106.3%, with coefficients of variation less than 21.7%. The total time of analysis, including sample preparation, was less than 30 min. Twenty naturally contaminated maize samples were tested using MWFPIA and HPLC-MS/MS, with correlation coefficients (R(2)) of 0.97 for DON and 0.99 for FB1. By changing the targets of interest, homologous MWFPIA, a method with high sensitivity, a simple procedure and a short analysis time, can easily be extended to other chemical contaminants. Thus, MWFPIA represents a versatile strategy for food safety analysis.

Development of a screening fluorescence polarization immunoassay for the simultaneous detection of fumonisins B₁ and B₂ in maize

This paper reports the development of a screening fluorescence polarization immunoassay (FPIA) for the simultaneous detection of fumonisins B1 (FB1) and B2 (FB2) in maize. Three FB1 tracers including FB1-fluorescein isothiocyanate isomer I (FB1-FITC), FB1-5-([4,6-dichlorotriazine-2-yl]amino)-fluorescein (FB1-5-DTAF), and FB1-Texas Red-X succinimidyl ester (FB1-TRX) were synthesized and studied to select appropriate tracer-antibody pairs using seven previously produced monoclonal antibodies (mAbs). An FPIA employing the pair of FB1-FITC and mAb 4B9 showing 98.9% cross-reactivity (CR) toward FB2 was used to simultaneously detect FB1 and FB2. Maize flour samples were extracted with methanol/water (2:3, v/v). After optimization, the FPIA revealed a limit of detection (LOD) of 157.4 μg/kg for FB1 and an LOD of 290.6 μg/kg for FB2, respectively. Recoveries were measured for spiked samples of FB1 or FB2 separately, ranging from 84.7 to 93.6%, with a coefficient of variation (CV) of <9.9%. Total time needed for FPIA including sample pretreatment was <30 min. The FPIA was used to screen naturally contaminated maize samples. Results detected by FPIA showed good agreement with that of HPLC-MS/MS with a fit of R(2) = 0.99 for the simultaneous detection of FB1 and FB2. The established method offered a rapid, simple, sensitive, and high-throughput screening tool for the detection of fumonisins in maize.