Cross-linking of interfacial casein layer with genipin prevented pH-induced structural instability and lipase digestibility of the fat droplets

Enhanced in vitro bioavailability of resveratrol-loaded emulsion stabilized by β-lactoglobulin-catechin with excellent antioxidant activity

The study aimed to fabricate β-Lactoglobulin-catechin (β-La-Ca) conjugates as a natural designed antioxidant emulsifier to improve the physicochemical stability of resveratrol emulsion delivery system. Fourier transform infrared (FT-IR) and fluorescence spectroscopy analysis confirmed the formation of conjugates using free radical grafting. The antioxidant ability of emulsion was evaluated by DPPH scavenging activities and ORAC experiments. The emulsion stabilized by β-La-Ca conjugates exhibited strong antioxidant activity with ORAC value of 2541.39 ± 29.58 μmol TE/g, which was significantly higher than that by β-Lactoglobulin alone with 387.96 ± 23.45 μmol TE/g or their mixture with 948.23 ± 32.77 μmol TE/g. During the whole simulated gastrointestinal digestion, emulsion stabilized by β-La-Ca conjugates exhibited excellent oxidative stability that the lipid was mainly digested in the small intestine. This behavior attributed to the greater stability of resveratrol to chemical transformation leading to a higher overall bioavailability in vivo. These results suggested that the β-La-Ca conjugates could be used to fabricate the emulsion-based delivery system to improve the oxidative stability and bioavailability of chemically labile hydrophobic bioactive compounds.

Biobased polymer resources and essential oils: a green combination for antibacterial applications

To fight nosocomial infections, the excessive use of antibiotics has led to the emergence of multidrug-resistant microorganisms, which are now considered a relevant public health threat by the World Health Organization. To date, most antibacterial systems are based on the use of petro-sourced polymers, but the global supplies of these resources are depleting. Besides, silver NPs are widely accepted as the most active biocide against a wide range of bacterial strains but their toxicity is an issue. The growing interest in natural products has gained increasing interest in the last decade. Therefore, the design of functional antibacterial materials derived from biomass remains a significant challenge for the scientific community. Consequently, attention has shifted to naturally occurring substances such as essential oils (EOs), which are classified as Generally Recognized as Safe (GRAS). EOs can offer an alternative to the common antimicrobial agents as an inner solution or biocide agent to inhibit the resistance mechanism. Herein, this review not only aims at providing developments in the antibacterial modes of action of EOs against various bacterial strains and the recent advances in genomic and proteomic techniques for the elucidation of these mechanisms but also presents examples of biobased polymer resource-based EO materials and their antibacterial activities. Especially, we describe the antibacterial properties of biobased polymers, e.g. cellulose, starch, chitosan, PLA PHAs and proteins, associated with EOs (cinnamon (CEO), clove (CLEO), bergamot (BEO), ginger (GEO), lemongrass (LEO), caraway (CAEO), rosemary (REO), Eucalyptus globulus (EGEO), tea tree (TTEO), orange peel (OPEO) and apricot (Prunus armeniaca) kernel (AKEO) essential oils). Finally, we discuss the influence of EOs on the mechanical strength of bio-based materials.

A review of recent progress in improving the bioavailability of nutraceutical-loaded emulsions after oral intake

Increasing awareness of the health benefits of specific constituents in fruits, vegetables, cereals, and other whole foods has sparked a broader interest in the potential health benefits of nutraceuticals. Many nutraceuticals are hydrophobic substances, which means they must be encapsulated in colloidal delivery systems. Oil-in-water emulsions are one of the most widely used delivery systems for improving the bioavailability and bioactivity of these nutraceuticals. The composition and structure of emulsions can be designed to improve the water dispersibility, physicochemical stability, and bioavailability of the encapsulated nutraceuticals. The nature of the emulsion used influences the interfacial area and properties of the nutraceutical-loaded oil droplets in the gastrointestinal tract, which influences their digestion, as well as the bioaccessibility, metabolism, and absorption of the nutraceuticals. In this article, we review recent in vitro and in vivo studies on the utilization of emulsions to improve the bioavailability of nutraceuticals. The findings from this review should facilitate the design of more efficacious nutraceutical-loaded emulsions with increased bioactivity.

3D printed MCT oleogel as a co-delivery carrier for curcumin and resveratrol

Designing a suitable matrix to protect sensitive bioactive compounds is an important stage in nutraceutical development. In this study, emulsion templated medium-chain triglycerides (MCT) oleogel was developed as co-delivery carriers for synergistic nutraceuticals, curcumin, and resveratrol and to 3D print in customized shapes for personalized nutrition. To obtain the stable emulsion, gelatin and gellan gum were added such that their protein-polysaccharide interaction helps in the structuring of the oil phase. Increasing the amount of gellan gum had a positive effect on stabilizing the emulsion but became the critical parameter during 3D printing. Hence, gellan gum of 1.5% (w/v) and gelatin at 10% (w/v) of water were considered optimum to produce a stable 30% O/W emulsion for 3D printing. Upon analyzing the in-vitro digestion behavior of the oleogel, it was observed that the bioactives were protected under oral and gastric conditions and allowed intestinal targeted delivery. The total bioaccessible fraction increased up to 1.13-fold and 1.2-fold for curcumin and resveratrol respectively compared to control (MCT oil). The FFAs release profile also indicated that gelators play an important role in lipase activity. Also, the ex-vivo everted gut sac analysis showed enhanced permeation of about 1.83 times and 1.13 times for curcumin and resveratrol respectively. Thus, this study provides useful insights into the 3D printing of emulsion templated oleogel as personalized nutraceutical carriers.

Compartmentalized cross-linked enzymatic nano-aggregates (c-CLEnA) for efficient in-flow biocatalysis

Nano-sized enzyme aggregates, which preserve their catalytic activity are of great interest for flow processes, as these catalytic species show minimal diffusional issues, and are still sizeable enough to be effectively separated from the formed product. The realization of such catalysts is however far from trivial. The stable formation of a micro-to millimeter-sized enzyme aggregate is feasible via the formation of a cross-linked enzyme aggregate (CLEA); however, such a process leads to a rather broad size distribution, which is not always compatible with microflow conditions. Here, we present the design of a compartmentalized templated CLEA (c-CLEnA), inside the nano-cavity of bowl-shaped polymer vesicles, coined stomatocytes. Due to the enzyme preorganization and concentration in the cavity, cross-linking could be performed with substantially lower amount of cross-linking agents, which was highly beneficial for the residual enzyme activity. Our methodology is generally applicable, as demonstrated by using two different cross-linkers (glutaraldehyde and genipin). Moreover, c-CLEnA nanoreactors were designed with Candida antarctica Lipase B (CalB) and Porcine Liver Esterase (PLE), as well as a mixture of glucose oxidase (GOx) and horseradish peroxidase (HRP). Interestingly, when genipin was used as cross-linker, all enzymes preserved their initial activity. Furthermore, as proof of principle, we demonstrated the successful implementation of different c-CLEnAs in a flow reactor in which the c-CLEnA nanoreactors retained their full catalytic function even after ten runs. Such a c-CLEnA nanoreactor represents a significant step forward in the area of in-flow biocatalysis.

c-CLEnA are obtained via cross-linking enzymes in the nanocavity of supramolecular stomatocytes. Such c-CLEnA can be recycled while retaining its activity – an excellent nanoreactors platform for in-flow bio-catalysis.

Application of Protein-Based Films and Coatings for Food Packaging: A Review

As the IV generation of packaging, biopolymers, with the advantages of biodegradability, process ability, combination possibilities and no pollution to food, have become the leading food packaging materials. Biopolymers can be directly extracted from biomass, synthesized from bioderived monomers and produced directly by microorganisms which are all abundant and renewable. The raw materials used to produce biopolymers are low-cost, some even coming from agrion dustrial waste. This review summarized the advances in protein-based films and coatings for food packaging. The materials studied to develop protein-based packaging films and coatings can be divided into two classes: plant proteins and animal proteins. Parts of proteins are referred in this review, including plant proteins i.e., gluten, soy proteins and zein, and animal proteins i.e., casein, whey and gelatin. Films and coatings based on these proteins have excellent gas barrier properties and satisfactory mechanical properties. However, the hydrophilicity of proteins makes the protein-based films present poor water barrier characteristics. The application of plasticizers and the corresponding post-treatments can make the properties of the protein-based films and coatings improved. The addition of active compounds into protein-based films can effectively inhibit or delay the growth of microorganisms and the oxidation of lipids. The review also summarized the research about the storage requirements of various foods that can provide corresponding guidance for the preparation of food packaging materials. Numerous application examples of protein-based films and coatings in food packaging also confirm their important role in food packaging materials.

Genipin-Aided Protein Cross-linking to Modify Structural and Rheological Properties of Emulsion-Filled Hempseed Protein Hydrogels

Genipin, a natural electrophilic cross-linker, was applied (5, 10, 20, and 30 mM) to modify hempseed protein isolate (HPI). Genipin treatments resulted in general losses of total sulfhydryls (up to 2.9 nmol/mg) and free amines (up to 77.3 nmol/mg). Surface hydrophobicity decreased by nearly 90% with 30 mM genipin, corresponding to similar tryptophan fluorescence quenching. The genipin treatment converted HPI into highly cross-linked polymers. Hydrogels formed with such polymers when also incorporated with hemp oil emulsions exhibited substantially enhanced gelling ability: up to 3.3- and 2.6-fold increases, respectively, in gel strength and gel elasticity over genipin-untreated protein. The genipin-modified composite gels also exhibited superior water-holding capacity. Microstructural analysis revealed a compact gel network filled with protein-coated oil globules that interacted intimately with the protein matrix when treated with genipin. Such gels remained readily digestible. Hence, genipin-treated hemp protein hydrogels show promise as functional food components.

Enhanced delivery of lipophilic bioactives using emulsions: a review of major factors affecting vitamin, nutraceutical, and lipid bioaccessibility

Many researchers are currently developing emulsion-based delivery systems to increase the bioavailability of lipophilic bioactive agents, such as oil-soluble vitamins, nutraceuticals, and lipids. Oil-in-water emulsions can be specifically designed to improve the bioavailability of these bioactives by altering their composition and structural organization. This article reviews recent progress in understanding the impact of emulsion properties on the bioaccessibility of lipophilic bioactive agents, including oil phase composition, aqueous phase composition, droplet size, emulsifier type, lipid physical state, and droplet aggregation state. This knowledge can be used to design emulsions that can enhance the bioavailability and efficacy of encapsulated hydrophobic bioactives.

Utilization of nanoemulsions to enhance bioactivity of pharmaceuticals, supplements, and nutraceuticals: Nanoemulsion delivery systems and nanoemulsion excipient systems

INTRODUCTION

The efficacy of many hydrophobic bioactives (pharmaceuticals, supplements, and nutraceuticals) is limited due to their relatively low or highly variable bioavailability. Nanoemulsions consisting of small lipid droplets (r < 100 nm) dispersed in water can be designed to improve bioavailability.

AREAS COVERED

The major factors limiting the oral bioavailability of hydrophobic bioactive agents are highlighted: bioaccessibility, absorption and transformation. Two nanoemulsion-based approaches to control these processes and improve bioavailability are discussed: nanoemulsion delivery systems (NDS) and nanoemulsion excipient systems (NES). In NDS, hydrophobic bioactives are dissolved within the lipid phase of oil-in-water nanoemulsions. In NES, the bioactives are present within a conventional drug, supplement, or food, which is consumed with an oil-in-water nanoemulsion. Examples of NDS and NES utilization to improve bioactive bioavailability are given.

EXPERT OPINION

Considerable progress has been made in nanoemulsion design, fabrication, and testing. This knowledge facilitates the design of new formulations to improve the bioavailability of pharmaceuticals, supplements, and nutraceuticals. NDS and NES must be carefully designed based on the major factors limiting the bioavailability of specific bioactives. Research is still required to ensure these systems are commercially viable, and to demonstrate their safety and efficacy using animal and human feeding studies.