Event-specific detection of stacked genetically modified maize Bt11 x GA21 by UP-M-PCR and real-time PCR

Single universal primer recombinase polymerase amplification-based lateral flow biosensor (SUP-RPA-LFB) for multiplex detection of genetically modified maize

In this study, an isothermal paper biosensor, combining single universal primer recombinase polymerase amplification (SUP-RPA) and the lateral flow technique was developed for the multiplex detection of genetically modified maize (GMM). In pre-amplification stage, the event-specific primers contain a universal sequence at the 5' end, with a biotin-labeled deoxycytidine triphosphate (dCTP) deoxynucleotide providing additional amplification, which improves their amplification ability and ensures consistent multiplex amplification efficiency. In the signal recognition strategy, the SUP-RPA products are identified visually using the lateral flow biosensor (LFB) through dual hybridization. The accumulation of gold nanoparticles (AuNPs) produces a characteristic red band. Through this biosensor, a limit of detection of at least 50 copies was achieved, which is sensitive enough to detect MON810, MON863 and MON89034 simultaneously. The entire process of analysis was completed within 30 min and without any large-scale instrumentation. This biosensor, therefore, provides a novel rapid and portable multiple detection method for point-of-care applications, especially genetically modified organism (GMO) event-specific detection.

Ultrasensitive Single Fluorescence-Labeled Probe-Mediated Single Universal Primer-Multiplex-Droplet Digital Polymerase Chain Reaction for High-Throughput Genetically Modified Organism Screening

As genetically modified (GM) technology develops and genetically modified organisms (GMOs) become more available, GMOs face increasing regulations and pressure to adhere to strict labeling guidelines. A singleplex detection method cannot perform the high-throughput analysis necessary for optimal GMO detection. Combining the advantages of multiplex detection and droplet digital polymerase chain reaction (ddPCR), a single universal primer-multiplex-ddPCR (SUP-M-ddPCR) strategy was proposed for accurate broad-spectrum screening and quantification. The SUP increases efficiency of the primers in PCR and plays an important role in establishing a high-throughput, multiplex detection method. Emerging ddPCR technology has been used for accurate quantification of nucleic acid molecules without a standard curve. Using maize as a reference point, four heterologous sequences ( 35S, NOS, NPTII, and PAT) were selected to evaluate the feasibility and applicability of this strategy. Surprisingly, these four genes cover more than 93% of the transgenic maize lines and serve as preliminary screening sequences. All screening probes were labeled with FAM fluorescence, which allows the signals from the samples with GMO content and those without to be easily differentiated. This fiveplex screening method is a new development in GMO screening. Utilizing an optimal amplification assay, the specificity, limit of detection (LOD), and limit of quantitation (LOQ) were validated. The LOD and LOQ of this GMO screening method were 0.1% and 0.01%, respectively, with a relative standard deviation (RSD) < 25%. This method could serve as an important tool for the detection of GM maize from different processed, commercially available products. Further, this screening method could be applied to other fields that require reliable and sensitive detection of DNA targets.

On-site detection of stacked genetically modified soybean based on event-specific TM-LAMP and a DNAzyme-lateral flow biosensor

Stacked genetically modified organisms (GMO) are becoming popular for their enhanced production efficiency and improved functional properties, and on-site detection of stacked GMO is an urgent challenge to be solved. In this study, we developed a cascade system combining event-specific tag-labeled multiplex LAMP with a DNAzyme-lateral flow biosensor for reliable detection of stacked events (DP305423× GTS 40-3-2). Three primer sets, both event-specific and soybean species-specific, were newly designed for the tag-labeled multiplex LAMP system. A trident-like lateral flow biosensor displayed amplified products simultaneously without cross contamination, and DNAzyme enhancement improved the sensitivity effectively. After optimization, the limit of detection was approximately 0.1% (w/w) for stacked GM soybean, which is sensitive enough to detect genetically modified content up to a threshold value established by several countries for regulatory compliance. The entire detection process could be shortened to 120min without any large-scale instrumentation. This method may be useful for the in-field detection of DP305423× GTS 40-3-2 soybean on a single kernel basis and on-site screening tests of stacked GM soybean lines and individual parent GM soybean lines in highly processed foods.

Multiplex enrichment quantitative PCR (ME-qPCR): a high-throughput, highly sensitive detection method for GMO identification

Among all of the high-throughput detection methods, PCR-based methodologies are regarded as the most cost-efficient and feasible methodologies compared with the next-generation sequencing or ChIP-based methods. However, the PCR-based methods can only achieve multiplex detection up to 15-plex due to limitations imposed by the multiplex primer interactions. The detection throughput cannot meet the demands of high-throughput detection, such as SNP or gene expression analysis. Therefore, in our study, we have developed a new high-throughput PCR-based detection method, multiplex enrichment quantitative PCR (ME-qPCR), which is a combination of qPCR and nested PCR. The GMO content detection results in our study showed that ME-qPCR could achieve high-throughput detection up to 26-plex. Compared to the original qPCR, the Ct values of ME-qPCR were lower for the same group, which showed that ME-qPCR sensitivity is higher than the original qPCR. The absolute limit of detection for ME-qPCR could achieve levels as low as a single copy of the plant genome. Moreover, the specificity results showed that no cross-amplification occurred for irrelevant GMO events. After evaluation of all of the parameters, a practical evaluation was performed with different foods. The more stable amplification results, compared to qPCR, showed that ME-qPCR was suitable for GMO detection in foods. In conclusion, ME-qPCR achieved sensitive, high-throughput GMO detection in complex substrates, such as crops or food samples. In the future, ME-qPCR-based GMO content identification may positively impact SNP analysis or multiplex gene expression of food or agricultural samples. Graphical abstract For the first-step amplification, four primers (A, B, C, and D) have been added into the reaction volume. In this manner, four kinds of amplicons have been generated. All of these four amplicons could be regarded as the target of second-step PCR. For the second-step amplification, three parallels have been taken for the final evaluation. After the second evaluation, the final amplification curves and melting curves have been achieved.

Structure of Exogenous Gene Integration and Event-Specific Detection in the Glyphosate-Tolerant Transgenic Cotton Line BG2-7

In this study, the flanking sequence of an inserted fragment conferring glyphosate tolerance on transgenic cotton line BG2-7 was analyzed by thermal asymmetric interlaced polymerase chain reaction (TAIL-PCR) and standard PCR. The results showed apparent insertion of the exogenous gene into chromosome D10 of the Gossypium hirsutum L. genome, as the left and right borders of the inserted fragment are nucleotides 61,962,952 and 61,962,921 of chromosome D10, respectively. In addition, a 31-bp cotton microsatellite sequence was noted between the genome sequence and the 5' end of the exogenous gene. In total, 84 and 298 bp were deleted from the left and right borders of the exogenous gene, respectively, with 30 bp deleted from the cotton chromosome at the insertion site. According to the flanking sequence obtained, several pairs of event-specific detection primers were designed to amplify sequence between the 5' end of the exogenous gene and the cotton genome junction region as well as between the 3' end and the cotton genome junction region. Based on screening tests, the 5'-end primers GTCATAACGTGACTCCCTTAATTCTCC/CCTATTACACGGCTATGC and 3'-end primers TCCTTTCGCTTTCTTCCCTT/ACACTTACATGGCGTCTTCT were used to detect the respective BG2-7 event-specific primers. The limit of detection of the former primers reached 44 copies, and that of the latter primers reached 88 copies. The results of this study provide useful data for assessment of BG2-7 safety and for accelerating its industrialization.

A Novel Pretreatment-Free Duplex Chamber Digital PCR Detection System for the Absolute Quantitation of GMO Samples

Digital polymerase chain reaction (PCR) has developed rapidly since it was first reported in the 1990s. However, pretreatments are often required during preparation for digital PCR, which can increase operation error. The single-plex amplification of both the target and reference genes may cause uncertainties due to the different reaction volumes and the matrix effect. In the current study, a quantitative detection system based on the pretreatment-free duplex chamber digital PCR was developed. The dynamic range, limit of quantitation (LOQ), sensitivity and specificity were evaluated taking the GA21 event as the experimental object. Moreover, to determine the factors that may influence the stability of the duplex system, we evaluated whether the pretreatments, the primary and secondary structures of the probes and the SNP effect influence the detection. The results showed that the LOQ was 0.5% and the sensitivity was 0.1%. We also found that genome digestion and single nucleotide polymorphism (SNP) sites affect the detection results, whereas the unspecific hybridization within different probes had little side effect. This indicated that the detection system was suited for both chamber-based and droplet-based digital PCR. In conclusion, we have provided a simple and flexible way of achieving absolute quantitation for genetically modified organism (GMO) genome samples using commercial digital PCR detection systems.

A highly sensitive and specific method for the screening detection of genetically modified organisms based on digital PCR without pretreatment

Digital PCR has developed rapidly since it was first reported in the 1990s. It was recently reported that an improved method facilitated the detection of genetically modified organisms (GMOs). However, to use this improved method, the samples must be pretreated, which could introduce inaccuracy into the results. In our study, we explored a pretreatment-free digital PCR detection method for the screening for GMOs. We chose the CaMV35s promoter and the NOS terminator as the templates in our assay. To determine the specificity of our method, 9 events of GMOs were collected, including MON810, MON863, TC1507, MIR604, MIR162, GA21, T25, NK603 and Bt176. Moreover, the sensitivity, intra-laboratory and inter-laboratory reproducibility of our detection method were assessed. The results showed that the limit of detection of our method was 0.1%, which was lower than the labeling threshold level of the EU. The specificity and stability among the 9 events were consistent, respectively. The intra-laboratory and inter-laboratory reproducibility were both good. Finally, the perfect fitness for the detection of eight double-blind samples indicated the good practicability of our method. In conclusion, the method in our study would allow more sensitive, specific and stable screening detection of the GMO content of international trading products.

GMO quantification: valuable experience and insights for the future

Cultivation and marketing of genetically modified organisms (GMOs) have been unevenly adopted worldwide. To facilitate international trade and to provide information to consumers, labelling requirements have been set up in many countries. Quantitative real-time polymerase chain reaction (qPCR) is currently the method of choice for detection, identification and quantification of GMOs. This has been critically assessed and the requirements for the method performance have been set. Nevertheless, there are challenges that should still be highlighted, such as measuring the quantity and quality of DNA, and determining the qPCR efficiency, possible sequence mismatches, characteristics of taxon-specific genes and appropriate units of measurement, as these remain potential sources of measurement uncertainty. To overcome these problems and to cope with the continuous increase in the number and variety of GMOs, new approaches are needed. Statistical strategies of quantification have already been proposed and expanded with the development of digital PCR. The first attempts have been made to use new generation sequencing also for quantitative purposes, although accurate quantification of the contents of GMOs using this technology is still a challenge for the future, and especially for mixed samples. New approaches are needed also for the quantification of stacks, and for potential quantification of organisms produced by new plant breeding techniques.

Detection and identification of genetically modified EE-1 brinjal (Solanum melongena) by single, multiplex and SYBR® real-time PCR

BACKGROUND

Brinjal is an important vegetable crop. Major crop loss of brinjal is due to insect attack. Insect-resistant EE-1 brinjal has been developed and is awaiting approval for commercial release. Consumer health concerns and implementation of international labelling legislation demand reliable analytical detection methods for genetically modified (GM) varieties.

RESULTS

End-point and real-time polymerase chain reaction (PCR) methods were used to detect EE-1 brinjal. In end-point PCR, primer pairs specific to 35S CaMV promoter, NOS terminator and nptII gene common to other GM crops were used. Based on the revealed 3' transgene integration sequence, primers specific for the event EE-1 brinjal were designed. These primers were used for end-point single, multiplex and SYBR-based real-time PCR. End-point single PCR showed that the designed primers were highly specific to event EE-1 with a sensitivity of 20 pg of genomic DNA, corresponding to 20 copies of haploid EE-1 brinjal genomic DNA. The limits of detection and quantification for SYBR-based real-time PCR assay were 10 and 100 copies respectively.

CONCLUSION

The prior development of detection methods for this important vegetable crop will facilitate compliance with any forthcoming labelling regulations.

A universal primer multiplex PCR method for typing of toxinogenic Pseudomonas aeruginosa

Pseudomonas aeruginosa is a well-known opportunistic pathogen that can cause acute nosocomial necrotizing pneumonia and genetic disorder cystic fibrosis of lung patients. Pathogenic interactions between P. aeruginosa and hosts are often guided by the secreted virulence determinants that interact with specific host targets. Exotoxin A, pyocyanin, elastase, and type III secretion system are the most significant virulence determinants and cause great concern. However, P. aeruginosa in various environments has high genotypic diversity, leading to deficiency of exotoxin genes for some P. aeruginosa strains. In current study, a universal primer-multiplex PCR method (UP-MPCR) was employed for the detection of five significant enterotoxin genes (toxA, phzM, lasB, ExoU, and ExoS) and one internal control gene ecfX in P. aeruginosa. Owing to the application of universal primer (UP), different targeted products have identical amplified efficiency and the sensitivity of multiplex PCR is improved. In addition, the complexity of multiplex PCR system is reduced and the compatibility of primers in a reaction is greatly increased. This UP-MPCR method can detect the presence of five P. aeruginosa enterotoxin genes in a single assay more rapidly and sensitively than conventional methods. In 214 drinking water and environmental isolates, the ExoU, ExoS, phzM, toxA, and lasB genes were detected in 20 (9 %), 180 (84 %), 179 (84 %), 196 (92 %), and 171 (80 %) isolates, respectively.

[Molecular characteristics and specific PCR detection of transgenic rice containing Cry1Ab]

Bt01 is a new type of rice that has been genetically modified to express Cry1Abprotein. This study confirmed that Cry1Abwas inserted into Bt01 as a single copy using Southern blotting analysis. TAIL-PCR method was further used to obtain its insertion site information. Specific PCR primers and TaqMan probes were designed based on the 5'-integration junction sequence of transgenic rice Bt01. The results showed that the limit of detection (LOD) was ten copies in qualitative PCR. The quantitative PCR assay showed that the LOD was five copies, and the limit of quantification (LOQ) was ten cop-ies. In addition, the accuracy of the established quantitative PCR was verified by detecting two samples containing 3% and 0.5%Bt01, respectively. The quantitative PCR analysis showed the results were 2.7% and 0.47%, respectively.The above results indicated that the event-specific PCR methods developed have high specificity and good sensitivity, which could be effective methods for identifying and testing the genetically modified Bt01 rice.

A novel universal primer-multiplex-PCR method with sequencing gel electrophoresis analysis

In this study, a novel universal primer-multiplex-PCR (UP-M-PCR) method adding a universal primer (UP) in the multiplex PCR reaction system was described. A universal adapter was designed in the 5'-end of each specific primer pairs which matched with the specific DNA sequences for each template and also used as the universal primer (UP). PCR products were analyzed on sequencing gel electrophoresis (SGE) which had the advantage of exhibiting extraordinary resolution. This method overcame the disadvantages rooted deeply in conventional multiplex PCR such as complex manipulation, lower sensitivity, self-inhibition and amplification disparity resulting from different primers, and it got a high specificity and had a low detection limit of 0.1 ng for single kind of crops when screening the presence of genetically modified (GM) crops in mixture samples. The novel developed multiplex PCR assay with sequencing gel electrophoresis analysis will be useful in many fields, such as verifying the GM status of a sample irrespective of the crop and GM trait and so on.

Universal primer-multiplex-polymerase chain reaction (UP-M-PCR) and capillary electrophoresis-laser-induced fluorescence analysis for the simultaneous detection of six genetically modified maize lines

To meet the labeling and traceability requirement of genetically modified (GM) maize and their products for trade and regulation, it is essential to develop a specific detection method for monitoring the presence of GM content. In this work, six GM maize lines, including GA21, Bt11, NK603, Bt176, Mir604, and Mon810, were simultaneously detected by universal primer-multiplex-polymerase chain reaction (UP-M-PCR), and the amplicons for the six event-specific genes as well as the endogenous Ivr gene were successfully separated by the method of capillary electrophoresis-laser-induced fluorescence (CE-LIF). The UP-M-PCR method overcame the disadvantages in conventional M-PCR, such as complex manipulation, lower sensitivity, amplification disparity resulting from different primers, etc., and in combination with CE-LIF, it obtained a high sensitivity of 0.1 ng for both single and mixed DNA samples. The established method can be widely used for the qualitative identification of the GM maize lines.

Detection of six genetically modified maize lines using optical thin-film biosensor chips

As more and more genetically modified organisms (GMO) are commercialized, efficient and inexpensive assays are required for their quick detection. An event-specific detection strategy based on the unique and specific sequences of integration junctions is useful because of its high specificity. This study developed a system for detecting six GM maize lines (Bt11, Bt176, GA21, MON810, NK603, and T25) using optical silicon thin-film biosensor chips. Aldehyde-labeled probes were arrayed and covalently attached to a hydrazine-derivatized chip surface. Biotinylated PCR amplicons were then hybridized with the probes. After washing and brief incubation with an anti-biotin IgG horseradish peroxidase conjugate and a precipitable horseradish peroxidase substrate, biotinylated PCR amplicons perfectly matched with the probes can be visualized by the color change on the chip surface (gold to blue/purple). This assay is extremely robust, exhibits high sensitivity and specificity, and is flexible from low through moderate to high throughput.

Soft fruit traceability in food matrices using real-time PCR

Food product authentication provides a means of monitoring and identifying products for consumer protection and regulatory compliance. There is a scarcity of analytical methods for confirming the identity of fruit pulp in products containing Soft Fruit. In the present work we have developed a very sensible qualitative and quantitative method to determine the presence of berry DNAs in different food matrices. To our knowledge, this is the first study that shows the applicability, to Soft Fruit traceability, of melting curve analysis and multiplexed fluorescent probes, in a Real-Time PCR platform. This methodology aims to protect the consumer from label misrepresentation.