Time-resolved resonance Raman and density functional theory investigation of iodocyclopropanation and addition reactions with alkenes after ultraviolet photolysis of iodoform

The carbon-iodine bond cleavage and isomerization of iodoform visualized with femtosecond X-ray liquidography

Iodoform (CHI3) has garnered significant attention for its unique ability to induce photo-cyclopropanation of olefins by releasing an iodine radical through C-I bond cleavage. However, the detailed mechanism underlying CHI3 photodissociation is still not fully understood. Here, we elucidate the ultrafast structural dynamics of CHI3 upon photoexcitation using femtosecond time-resolved X-ray liquidography (fs-TRXL) at an X-ray free-electron laser facility. The fs-TRXL data was decomposed into the isotropic and anisotropic data. The isotropic data reveal that the formation of CHI2 and I radicals upon photolysis precedes the emergence of iso-CHI2-I. After a short induction period, two competing geminate recombination pathways of CHI2 and I radicals take place: one pathway leads to the recovery of CHI3, while the other results in the formation of iso-CHI2-I. Additionally, the anisotropic data show how the transient anisotropic distribution of both the species formed upon photoexcitation and the ground-state species depleted upon photoexcitation decays through rotational dephasing. Furthermore, the observed structural dynamics of CHI3 has distinctive differences with that of BiI3, which can be attributed to differences in their central moieties, CH and Bi. Our findings provide insights into the photoinduced reaction dynamics of CHI3, enhancing the understanding of its role in photochemical reactions.

In Vivo Assessment of the Calcium Salt-Forming Ability of a New Calcium Silicate-Based Intracanal Medicament: Bio-C Temp

Calcium salt precipitation induced by intracanal medicaments contributes to the formation of apical hard tissue during apexification. This study compared the calcium salt-forming ability of a new calcium silicate-based intracanal medicament (Bio-C Temp) with that of two commercial calcium hydroxide pastes (Calcipex Plane II and Vitapex) in a rat subcutaneous implantation model. Polytetrafluoroethylene tubes containing each of the three materials were subcutaneously implanted in 4-week-old male Wistar rats. After 28 days, the composition and amount of calcium salts formed at the material–tissue interface were assessed using micro-Raman spectroscopy, X-ray diffraction, and elemental mapping. The tested materials produced white precipitates that had Raman spectra with peaks corresponding to hydroxyapatite and calcite. X-ray diffraction detected hydroxyapatite formation on Calcipex Plane II and Vitapex implants, as well as calcite formation on all three materials. Elemental mapping revealed that Bio-C Temp generated significantly smaller calcium- and phosphorus-rich calcified regions within the subcutaneous connective tissue than Vitapex. These results indicate that Bio-C Temp produced less calcium salt in rat subcutaneous tissue than Vitapex, although all materials formed hydroxyapatite and calcite in rat subcutaneous tissue. Bio-C Temp could be less effective than Vitapex in promoting apical hard tissue formation during apexification.

Fate of transient isomer of CH2I2: Mechanism and origin of ionic photoproducts formation unveiled by time-resolved x-ray liquidography

Diiodomethane, CH₂I₂, in a polar solvent undergoes a unique photoinduced reaction whereby I₂ ^- and I₃ ^- are produced from its photodissociation, unlike for other iodine-containing haloalkanes. While previous studies proposed that homolysis, heterolysis, or solvolysis of iso-CH₂I-I, which is a major intermediate of the photodissociation, can account for the formation of I₂ ^- and I₃ ^-, there has been no consensus on its mechanism and no clue for the reason why those negative ionic species are not observed in the photodissociation of other iodine-containing chemicals in the same polar solvent, for example, CHI₃, C₂H₄I₂, C₂F₄I₂, I₃ ^-, and I₂. Here, using time-resolved X-ray liquidography, we revisit the photodissociation mechanism of CH₂I₂ in methanol and determine the structures of all transient species and photoproducts involved in its photodissociation and reveal that I₂ ^- and I₃ ^- are formed via heterolysis of iso-CH₂I-I in the photodissociation of CH₂I₂ in methanol. In addition, we demonstrate that the high polarity of iso-CH₂I-I is responsible for the unique photochemistry of CH₂I₂.

Taking the plunge: chemical reaction dynamics in liquids

The dynamics of chemical reactions in liquid solutions are now amenable to direct study using ultrafast laser spectroscopy techniques and advances in computer simulation methods. The surrounding solvent affects the chemical reaction dynamics in numerous ways, which include: (i) formation of complexes between reactants and solvent molecules; (ii) modifications to transition state energies and structures relative to the reactants and products; (iii) coupling between the motions of the reacting molecules and the solvent modes, and exchange of energy; (iv) solvent caging of reactants and products; and (v) structural changes to the solvation shells in response to the changing chemical identity of the solutes, on timescales which may be slower than the reactive events. This article reviews progress in the study of bimolecular chemical reaction dynamics in solution, concentrating on reactions which occur on ground electronic states. It illustrates this progress with reference to recent experimental and computational studies, and considers how the various ways in which a solvent affects the chemical reaction dynamics can be unravelled. Implications are considered for research in fields such as mechanistic synthetic chemistry.

Direct Observation of a Transiently Formed Isomer During Iodoform Photolysis in Solution by Time-Resolved X-ray Liquidography

Photolysis of iodoform (CHI₃) in solution has been extensively studied, but its reaction mechanism remains elusive. In particular, iso-iodoform (iso-CHI₂-I) is formed as a product of the photolysis reaction, but its detailed structure is not known, and whether it is a major intermediate species has been controversial. Here, by using time-resolved X-ray liquidography, we determined the reaction mechanism of CHI₃ photodissociation in cyclohexane as well as the structure of iso-CHI₂-I. Both iso-CHI₂-I and CHI₂ radical were found to be formed within 100 ps with a branching ratio of 40:60. Iodine radicals (I), formed during the course of CHI₃ photolysis, recombine nongeminately with either CHI₂ or I. Based on our structural analysis, the I-I distance and the C-I-I angle of iso-CHI₂-I were determined to be 2.922 ± 0.004 Å and 133.9 ± 0.8°, respectively.

Identifying the major intermediate species by combining time-resolved X-ray solution scattering and X-ray absorption spectroscopy

Identifying the intermediate species along a reaction pathway is a first step towards a complete understanding of the reaction mechanism, but often this task is not trivial. There has been a strong on-going debate: which of the three intermediates, the CHI2 radical, the CHI2-I isomer, and the CHI2(+) ion, is the dominant intermediate species formed in the photolysis of iodoform (CHI3)? Herein, by combining time-resolved X-ray liquidography (TRXL) and time-resolved X-ray absorption spectroscopy (TR-XAS), we present strong evidence that the CHI2 radical is dominantly formed from the photolysis of CHI3 in methanol at 267 nm within the available time resolution of the techniques (∼20 ps for TRXL and ∼100 ps for TR-XAS). The TRXL measurement, conducted using the time-slicing scheme, detected no CHI2-I isomer within our signal-to-noise ratio, indicating that, if formed, the CHI2-I isomer must be a minor intermediate. The TR-XAS transient spectra measured at the iodine L1 and L3 edges support the same conclusion. The present work demonstrates that the application of these two complementary time-resolved X-ray methods to the same system can provide a detailed understanding of the reaction mechanism.

Perspective: Bimolecular chemical reaction dynamics in liquids

Bimolecular reactions in the gas phase exhibit rich and varied dynamical behaviour, but whether a profound knowledge of the mechanisms of isolated reactive collisions can usefully inform our understanding of reactions in liquid solutions remains an open question. The fluctuating environment in a liquid may significantly alter the motions of the reacting particles and the flow of energy into the reaction products after a transition state has been crossed. Recent experimental and computational studies of exothermic reactions of CN radicals with organic molecules indicate that many features of the gas-phase dynamics are retained in solution. However, observed differences may also provide information on the ways in which a solvent modifies fundamental chemical mechanisms. This perspective examines progress in the use of time-resolved infra-red spectroscopy to study reaction dynamics in liquids, discusses how existing theories can guide the interpretation of experimental data, and suggests future challenges for this field of research.

Water-Catalyzed Dehalogenation Reactions of the Isomer of CBr4 and Its Reaction Products and a Comparison to Analogous Reactions of the Isomers of Di- and Trihalomethanes

A combined experimental and theoretical study of the UV photolysis of a typical tetrahalomethane, CBr4, in water and acetonitrile/water was performed. Ultraviolet photolysis of low concentrations of CBr4 in water mostly leads to the production of four HBr leaving groups and CO2. Picosecond time-resolved resonance Raman (Ps-TR3) experiments and ab initio calculations indicate that water-catalyzed O-H insertion/HBr elimination of the isomer of CBr4 and subsequent reactions of its products lead to the formation of these products. The UV photolyses of di-, tri-, and tetrahalomethanes at low concentrations in water-solvated environments are compared to one another. This comparison enables a general reaction scheme to be deduced that can account for the different products produced by UV photolysis of low concentrations of di-, tri-, and tetrahalomethanes in water. The fate of the (halo)formaldehyde intermediate in the chemical reaction mechanism is the key to determining how many strong acid leaving groups are produced and which carbon atom final product is likely formed by UV photolysis of a polyhalomethane at low concentrations in a water-solvated environment.

Efficient dehalogenation of polyhalomethanes and production of strong acids in aqueous environments: Water-catalyzed O–H-insertion and HI-elimination reactions of isodiiodomethane (CH2I–I) with water

A combined experimental and theoretical study of the ultraviolet photolysis of CH2I2 in water is reported. Ultraviolet photolysis of low concentrations of CH2I2 in water was experimentally observed to lead to almost complete conversion into CH2(OH)2 and 2HI products. Picosecond time-resolved resonance Raman spectroscopy experiments in mixed water/acetonitrile solvents (25%-75% water) showed that appreciable amounts of isodiiodomethane (CH2I-I) were formed within several picoseconds and the decay of the CH2I-I species became substantially shorter with increasing water concentration, suggesting that CH2I-I may be reacting with water. Ab initio calculations demonstrate the CH2I-I species is able to react readily with water via a water-catalyzed O--H-insertion and HI-elimination reaction followed by its CH2I(OH) product undergoing a further water-catalyzed HI-elimination reaction to make a H2C=O product. These HI-elimination reactions produce the two HI leaving groups observed experimentally and the H2C=O product further reacts with water to produce the other final CH2(OH)2 product observed in the photochemistry experiments. These results suggest that CH2I-I is the species that reacts with water to produce the CH2(OH)2 and 2HI products seen in the photochemistry experiments. The present study demonstrates that ultraviolet photolysis of CH2I2 at low concentration leads to efficient dehalogenation and release of multiple strong acid (HI) leaving groups. Some possible ramifications for the decomposition of polyhalomethanes and halomethanols in aqueous environments as well as the photochemistry of polyhalomethanes in the natural environment are briefly discussed.

Direct observation of an isopolyhalomethane O–H insertion reaction with water: Picosecond time-resolved resonance Raman (ps-TR3) study of the isobromoform reaction with water to produce a CHBr2OH product

Picosecond time-resolved resonance Raman (ps-TR3) spectroscopy was used to obtain the first definitive spectroscopic observation of an isopolyhalomethane O-H insertion reaction with water. The ps-TR3 spectra show that isobromoform is produced within several picoseconds after photolysis of CHBr3 and then reacts on the hundreds of picosecond time scale with water to produce a CHBr2OH reaction product. Photolysis of low concentrations of bromoform in aqueous solution resulted in noticeable formation of HBr strong acid. Ab initio calculations show that isobromoform can react with water to produce a CHBr2(OH) O-H insertion reaction product and a HBr leaving group. This is consistent with both the ps-TR3 experiments that observe the reaction of isobromoform with water to form a CHBr2(OH) product and photolysis experiments that show HBr acid formation. We briefly discuss the implications of these results for the phase dependent behavior of polyhalomethane photochemistry in the gas phase versus water solvated environments.

Comparison of the dehalogenation of polyhalomethanes and production of strong acids in aqueous and salt (NaCl) water environments: Ultraviolet photolysis of CH[sub 2]I[sub 2]

The ultraviolet photolysis of CH(2)I(2) was studied in water and salt water solutions using photochemistry and picosecond time-resolved resonance Raman spectroscopy. Photolysis in both types of environments produces mainly CH(2)(OH)(2) and HI products. However, photolysis of CH(2)I(2) in salt water leads to the formation of different products/intermediates (CH(2)ICl and Cl(2) (-)) not observed in the absence of salt in aqueous solutions. The amount of CH(2)(OH)(2) and HI products appears to decrease after photolysis of CH(2)I(2) in salt water compared to pure water. We briefly discuss possible implications of these results for photolysis of CH(2)I(2) and other polyhalomethanes in sea water and other salt aqueous environments compared to nonsalt water solvated environments.