Synthesis and photophysical properties of light-harvesting arrays comprised of a porphyrin bearing multiple perylene-monoimide accessory pigments

Panchromatic Absorbers Tethered for Bioconjugation or Surface Attachment

The syntheses of two triads are reported. Each triad is composed of two perylene-monoimides linked to a porphyrin via an ethyne unit, which bridges the perylene 9-position and a porphyrin 5- or 15-position. Each triad also contains a single tether composed of an alkynoic acid or an isophthalate unit. Each triad provides panchromatic absorption (350–700 nm) with fluorescence emission in the near-infrared region (733 or 743 nm; fluorescence quantum yield ~0.2). The syntheses rely on the preparation of trans-AB-porphyrins bearing one site for tether attachment (A), an aryl group (B), and two open meso-positions. The AB-porphyrins were prepared by the condensation of a 1,9-diformyldipyrromethane and a dipyrromethane. The installation of the two perylene-monoimide groups was achieved upon the 5,15-dibromination of the porphyrin and the subsequent copper-free Sonogashira coupling, which was accomplished before or after the attachment of the tether. The syntheses provide relatively straightforward access to a panchromatic absorber for use in bioconjugation or surface-attachment processes.

Supramolecular and suprabiomolecular photochemistry: a perspective overview

In this perspective review article, we have attempted to bring out the important current trends of research in the areas of supramolecular and suprabiomolecular photochemistry. Since the spans of the subject areas are very vast, it is impossible to cover all the aspects within the limited space of this review article. Nevertheless, efforts have been made to assimilate the basic understanding of how supramolecular interactions can significantly change the photophysical and other related physiochemical properties of chromophoric dyes and drugs, which have enormous academic and practical implications. We have discussed with reference to relevant chemical systems where supramolecularly assisted modulations in the properties of chromophoric dyes and drugs can be used or have already been used in different areas like sensing, dye/drug stabilization, drug delivery, functional materials, and aqueous dye laser systems. In supramolecular assemblies, along with their conventional photophysical properties, the acid-base properties of prototropic dyes, as well as the excited state prototautomerization and related proton transfer behavior of proton donor/acceptor dye molecules, are also largely modulated due to supramolecular interactions, which are often reflected very explicitly through changes in their absorption and fluorescence characteristics, providing us many useful insights into these chemical systems and bringing out intriguing applications of such changes in different applied areas. Another interesting research area in supramolecular photochemistry is the excitation energy transfer from the donor to acceptor moieties in self-assembled systems which have immense importance in light harvesting applications, mimicking natural photosynthetic systems. In this review article, we have discussed varieties of these aspects, highlighting their academic and applied implications. We have tried to emphasize the progress made so far and thus to bring out future research perspectives in the subject areas concerned, which are anticipated to find many useful applications in areas like sensors, catalysis, electronic devices, pharmaceuticals, drug formulations, nanomedicine, light harvesting, and smart materials.

Excited-state photophysical processes in a molecular system containing perylene bisimide and zinc porphyrin chromophores

Multichromophoric systems with efficient photoinduced excited-state processes are important for the conversion of solar energy in artificial photosynthesis. However, a low molecular absorption coefficient of these multichromophoric systems in the near-infrared region limits their power conversion efficiency in organic solar cells. It is critical to design molecules with a broad absorption range in the whole spectral region, to better harvest solar energy, and to reveal their important multiple-step photophysical processes for the design of organic solar cells. Here, we investigate a novel compound having three chromophores, namely two near-by N,N'-bis(1-pentyl)hexyl-3,4,9,10-perylenebiscarboximide (PDI) units linked to a zinc porphyrin core side by side (in the form of PDI-ZnPor-PDI), which absorbs solar energy ranging from the ultraviolet (UV) to near-infrared regions. The photophysical behavior of PDI-ZnPor-PDI in both film and solution forms, has been investigated using steady-state and transient spectroscopy measurements. Charge-transfer species and triplet excited-state species are observed, the excited-state evolutions of which are monitored using molecular vibrations as probes. These observations support the idea that PDI-ZnPor-PDI on photoexcitation generates the radical anion and triplet species of the PDI unit (PDI˙- and 3PDI*). Our results demonstrate the effect of solid film state on the photophysical properties in such multichromophoric system, and are valuable for guiding the design and utilization of novel near-infrared electron donors or acceptors for use in organic solar cells.

Aggregation Induced Emission Switching Based Ultrasensitive Ratiometric Detection of Biogenic Diamines Using a Perylenediimide-Based Smart Fluoroprobe

In recent years, the widely explored phenomenon "aggregation-induced emission (AIE)" has played a crucial role in the development of luminescent materials for light-emitting applications. In the same direction, the contribution of its sister concept "AIE switching" has been impressive. In comparison, the application of this concept in the field of biosensing or bioimaging is still in its infancy. Therefore, to shed light into the sensing of bioanalytes, we have developed a new perylenediimide (PDI)-based small fluorescent probe, benzoannulated PDI (Bp(Im)₂MA), that selectively detects diamines and biogenic amines (BAs) in solution via an "AIE-switching" phenomenon. The synthesized probe containing the bay-annulated anhydride moiety exhibits strong cyan emission in solution. In the mechanism, we have shown that the terminal free amine group of BAs readily reacts with a highly reactive anhydride moiety, which opens the cyclic anhydride moiety. In the open conformation, the free amine group along with a carboxylate group modulates the polarity of the system strikingly. Because of this induced polarity, the monomer of Bp(Im)₂MA-BAs conjugate aggregated in solution, thereby exhibiting a significant change in emission property in solution. This method may also be called a very simple and straightforward "naked eye" detection of BAs in solution, with a nanomolar detection limit. A detailed spectroscopic and microscopic investigation demonstrated the existence of the aggregated state. As the reporter dye also emits strongly in the solid state (yellowish orange), it therefore instantly made vapor-phase detection of BAs feasible. Finally, this vapor-phase detection of BAs by the probe was applied very effectively in the determination of spoilage of raw fish.

Linear and Kinked Oligo(phenyleneethynylene)s as Ideal Molecular Calibrants for Förster Resonance Energy Transfer

We show that oligo(phenyleneethynylene)s (oligoPEs) are ideal spacers for calibrating dye pairs used for Förster resonance energy transfer (FRET). Ensemble FRET measurements on linear and kinked diads with such spacers show the expected distance and orientation dependence of FRET. Measured FRET efficiencies match excellently with those predicted using a harmonic segmented chain model, which was validated by end-to-end distance distributions obtained from pulsed electron paramagnetic resonance measurements on spin-labeled oligoPEs with comparable label distances.

Synthesis and photovoltaic application of NIR-emitting perylene-monoimide dyes with large Stokes-shift

An efficient Sonogashira coupling protocol is developed for tetra-alkynylation at the bay and peri-positions of the perylene-monoimide (PMI) dye in its PMI(Br)4 form. The absorption band for these PMI dyes covered from the visible to Near-infrared (NIR) region and PMI(NMe2)4 is found to exhibit a record-breaking Stokes-shifted NIR emission with good photovoltaic properties.

Photophysics of perylene monoimide-labelled organocatalysts

A fluorophore-tagged organocatalyst undergoes electron transfer in polar solvents allowing to sense the presence of its free quinuclidine catalytic site.

Synthesis of highly-soluble push-pull perylenemonoimide derivatives by regioselective peri-functionalization for switchable memory applications

A regioselective synthetic protocol is developed via tetrabromination of perylenemonoimide (PMI) which leads to a series of PMI derivatives. The push-pull characteristics of these derivatives are established by spectroscopic and theoretical investigations. Finally, the semiconducting properties of the PMI dyes are utilized for the development of a switchable memory device.

Columnar Self-Assembly of Electron-Deficient Dendronized Bay-Annulated Perylene Bisimides

Three new heteroatom bay-annulated perylene bisimides (PBIs) have been synthesized by microwave-assisted synthesis in excellent yield. N-annulated and S-annulated perylene bisimides exhibited columnar hexagonal phase, whereas Se-annulated perylene bisimide exhibited low temperature columnar oblique phase in addition to the high temperature columnar hexagonal phase. The cup shaped bay-annulated PBIs pack into columns with enhanced intermolecular interactions. In comparison to PBI, these molecules exhibited lower melting and clearing temperature, with good solubility. A small red shift in the absorption was seen in the case of N-annulated PBI, whereas S- and Se-annulated PBIs exhibited blue-shifted absorption spectra. Bay-annulation increased the HOMO and LUMO levels of the N-annulated perylene bisimide, whereas a slight increase in the LUMO level and a decrease in the HOMO levels were observed in the case of S- and Se-annulated perylene bisimides, in comparison to the simple perylene bisimide. The band gaps of PBI and PBI-N were almost same, whereas an increase in the band gaps were observed in the case of S- and Se-annulated PBIs. The tendency to freeze in the ordered glassy columnar phase for PBI-N and PBI-S will help to overcome the charge traps due to crystallization, which are detrimental to one-dimensional charge carrier mobility. These solution processable electron deficient columnar semiconductors possessing good thermal stability may form an easily accessible promising class of n-type materials.

Artificial miniaturized luminescent materials based on perylene-covered glass surfaces

Cu(i)-Catalyzed 1,3-dipolar cycloaddition was used to construct a luminescent monolayer for an ICT-showing pyrrolidino-perylene association (5PMI) on glass surfaces, which represents a rare perylene chromophore, to date, anchored to a solid surface.

Donor–acceptor type A2B2porphyrins: synthesis, energy transfer, computational and electrochemical studies

Synthesis, photophysical, electrochemical and DFT studies of donor–acceptor type A₂B₂porphyrins and their Zn(ii) and Pd(ii) complexes have been described.

Synthesis and Functionalization of Porphyrins through Organometallic Methodologies

This review focuses on the postfunctionalization of porphyrins and related compounds through catalytic and stoichiometric organometallic methodologies. The employment of organometallic reactions has become common in porphyrin synthesis. Palladium-catalyzed cross-coupling reactions are now standard techniques for constructing carbon-carbon bonds in porphyrin synthesis. In addition, iridium- or palladium-catalyzed direct C-H functionalization of porphyrins is emerging as an efficient way to install various substituents onto porphyrins. Furthermore, the copper-mediated Huisgen cycloaddition reaction has become a frequent strategy to incorporate porphyrin units into functional molecules. The use of these organometallic techniques, along with the traditional porphyrin synthesis, now allows chemists to construct a wide range of highly elaborated and complex porphyrin architectures.

Panchromatic chromophore–tetrapyrrole light-harvesting arrays constructed from Bodipy, perylene, terrylene, porphyrin, chlorin, and bacteriochlorin building blocks

Five new chromophore–tetrapyrrole arrays bearing an ethynyl linker have been synthesized to explore the effects of chromophore nature and tetrapyrrole attachment site on panchromatic spectral properties.

Exoconformers ofN-(pyridin-2-yl)- andN-(pyridin-3-yl)norbornene-5,6-dicarboximide crystals

Two isomeric pyridine-substituted norbornenedicarboximide derivatives, namelyN-(pyridin-2-yl)-exo-norbornene-5,6-dicarboximide, (I), andN-(pyridin-3-yl)-exo-norbornene-5,6-dicarboximide, (II), both C14H12N2O4, have been crystallized and their structures unequivocally determined by single-crystal X-ray diffraction. The molecules consist of norbornene moieties fused to a dicarboximide ring substituted at the N atom by either pyridin-2-yl or pyridin-3-yl in ananticonfiguration with respect to the double bond, thus affordingexoisomers. In both compounds, the asymmetric unit consists of two independent molecules (Z′ = 2). In compound (I), the pyridine rings of the two independent molecules adopt different conformations,i.e. synandanti, with respect to the methylene bridge. The intermolecular contacts of (I) are dominated by C—H...O interactions. In contrast, in compound (II), the pyridine rings of both molecules have ananticonformation and the two independent molecules are linked by carbonyl–carbonyl interactions, as well as by C—H...O and C—H...N contacts.

Energy transfer and spectroscopic characterization of a perylenetetracarboxylic diimide (PDI) hexamer

Two different interactions in a PDI-hexamer, a strong interaction in face-to-face dimers and a weak interaction between the separated dimers, are investigated.

Vegetable-based dye-sensitized solar cells

In this review we provide an overview of vegetable pigments in dye-sensitized solar cells, starting from main limitations of cell performance to cost analysis and scaling-up prospects.

meso-arylporpholactones and their reduction products

The rational syntheses of meso-tetraaryl-3-oxo-2-oxaporphyrins 5, known as porpholactones, via MnO(4)(-)-mediated oxidations of the corresponding meso-tetraaryl-2,3-dihydroxychlorins (7) is detailed. Since chlorin 7 is prepared from the parent porphyrin 1, this amounts to a 2-step replacement of a pyrrole moiety in 1 by an oxazolone moiety. The stepwise reduction of the porpholactone 5 results in the formation of chlorin analogues, meso-tetraaryl-3-hydroxy-2-oxachlorin (11) and meso-tetraaryl-2-oxachlorins (12). The reactivity of 11 with respect to nucleophilic substitution by O-, N-, and S-nucleophiles is described. The profound photophysical consequences of the formal replacement of a pyrrole with an oxazolone (porphyrin-like chromophore) or (substituted) oxazole moiety (chlorin-like chromophore with, for the parent oxazolochlorin 12, red-shifted Q(x) band with enhanced oscillator strengths) are detailed and rationalized on the basis of SAC-CI and MNDO-PSDCI molecular orbital theory calculations. The single crystal X-ray structures of the porpholactones point at a minor steric interaction between the carbonyl oxygen and the flanking phenyl group. The essentially planar structures of all chromophores in all oxidation states prove that the observed optical properties originate from the intrinsic electronic properties of the chromophores and are not subject to conformational modulation.

Synthesis of perylene-porphyrin dyads for light-harvesting studies

The spectral coverage of porphyrin-based light-harvesting arrays can be enhanced through the use of suitable accessory pigments. Perylene-monoimide dyes can serve as valuable accessory pigments with porphyrins. To investigate the choice of perylene-monoimide and the effects of molecular architecture on light-harvesting efficacy, five perylene-porphyrin dyads were prepared. Each dyad employs a diphenylethyne linker that bridges the perylene N-imide site and the porphyrin meso-position. Three dyads incorporate a mono-phenoxy perylene at the o-, m-, or p-position of the meso-aryl group on the porphyrin. The two remaining dyads incorporate a perylene-monoimide (bearing zero or three phenoxy substituents) at the p-position of the meso-aryl group on the porphyrin. The introduction of phenoxy groups on the perylenes increases the solubility, a key requirement for use in light-harvesting arrays. The long-wavelength absorption band of the perylene shifts from 506 nm to 532 or 533 nm upon substitution with one or three phenoxy groups, respectively. The synthesis of the dyads entails Pd -mediated coupling of a bromo-perylene and an ethynyl porphyrin, or the mixed-aldehyde condensation with a perylene-aldehyde, mesitaldehyde, and pyrrole. Five perylene-monoimide dyes bearing an ethyne or bromo substituent at the p-position of the N-aryl unit were developed for this modular chemistry. Each perylene-porphyrin dyad exhibits efficient energy transfer from the excited perylene to the ground-state porphyrin.

Synthesis, characterization, and photophysical study of fluorescent N-substituted benzo[ghi]perylene "swallow tail" monoimides

A set of N-substituted benzoperylene monoimide (BPI) fluorophores was synthesized and characterized structurally and photophysically. Condensation of benzo[ghi]perylene-1,2-dicarboxylic anhydride in the presence of "swallow tail" alkyl amines produced fluorophores that are soluble in a range of organic solvents, highly absorbing in the near-UV (ε(334) = 79,000 M(-1) cm(-1)), and fluorescent in the visible range. Photophysical behavior of the compounds was studied with steady-state and time-correlated single photon counting. The synthesized BPIs exhibit positive solvachromatic emission (λ(em) (hexane) = 469 nm; λ(em) (ethanol) = 550 nm) as a function of solvent polarity with little change in their excited-state lifetime (9.6-6.5 ns) and fluorescence quantum yield (0.27-0.44) over the polarity range studied. Solvachromatic shifts were analyzed using the Lippert-Mataga approach. In nonpolar hydrocarbon solvents evidence of dual emission from closely spaced (562 cm(-1)) S(1) and S(2) excited states is observed. Preliminary peak assignments for the anomalous S(2) emission are made.