Synthesis of Sapphyrins, Heterosapphyrins, and Carbasapphyrins by a “4 + 1” Approach

Advent and features of pyriporphyrinoids: an overview of a pyridine-based porphyrin analogue

Pyriporphyrinoids have recently attracted a significant proliferation of attention due to their versatile characters, which stem from structural motifs in which the pyridine moiety is involved. The evolution of pyriporphyrin chemistry revealed the subtle modifications of the macrocyclic core that tweak the electronic structure as compared to the parental macrocycle. The amendment of π-electronic organization inside the core manifests exceptional photophysical and coordination properties that cover a vast range of seemingly contradictory fields. In fundamental chemistry, the pyridine unit acts as a modulator of π-conjugated porphyrinoid systems, resulting in aromaticity swapping. From the applied chemistry perspective, these macrocycles are primarily utilized as (i) sensors, (ii) NIR absorbing photoacoustic dyes, (iii) electrochemical catalysts, (iv) singlet biradicaloid generation and (v) contributors to generate metal complexes with intriguing binding modes. Surprisingly, despite their prominence, pyriporphyrinoids are inadequately investigated, while pyridine unit-embedded calixphyrin, calixpyridinopyrrole and calixpyridine are barely reported. This review article illustrates the controlled formation of specific porphyrinic scaffolds with pyridine unit(s) and diverse functionalized heterocyclic and/or carbocyclic building block(s), and demonstrates a substantial influence on the macrocyclic properties.

Tailoring the pore size of expanded porphyrinoids for lanthanide selectivity

Despite increase in demand, capacity for the recycling of rare earth elements remains limited, partly due to the inefficiencies with processes currently utilised in the separation of lanthanides. This study highlights the potential use of expanded porphyrinoids in lanthanide separation through selective binding, dependent on the tailored pore size of the macrocycle. Each emerging trend is subjected to multi-factored analysis to decompose the underlying source. Results promote the viability of size-based separation with preferential binding of larger lanthanum(iii) ions to amethyrin and isoamethyrin macrocycles, while smaller macrocycles such as pentaphyrin(0.0.0.0.0) present a preferential binding of lutetium(iii) ions. Additionally, the porphyrin(2.2.2.2) macrocycle shows a selectivity for gadolinium(iii) ions over both larger and smaller ions. An upper limit of applicable pore size is shown to be ≈2.8 Å, beyond which the formed complexes are predicted to be less stable than the corresponding nitrate complexes.

Organometallic Chemistry within the Structured Environment Provided by the Macrocyclic Cores of Carbaporphyrins and Related Systems

The unique environment within the core of carbaporphyrinoid systems provides a platform to explore unusual organometallic chemistry. The ability of these structures to form stable organometallic derivatives was first demonstrated for N-confused porphyrins but many other carbaporphyrin-type systems were subsequently shown to exhibit similar or complementary properties. Metalation commonly occurs with catalytically active transition metal cations and the resulting derivatives exhibit widely different physical, chemical and spectroscopic properties and range from strongly aromatic to nonaromatic and antiaromatic species. Metalation may trigger unusual, highly selective, oxidation reactions. Alkyl group migration has been observed within the cavity of metalated carbaporphyrins, and in some cases ring contraction of the carbocyclic subunit takes place. Over the past thirty years, studies in this area have led to multiple synthetic routes to carbaporphyrinoid ligands and remarkable organometallic chemistry has been reported. An overview of this important area is presented.

Synthesis and Studies of Fused Benzo-Benzisapphyrins

A series of rare examples of fused benzo-benzisapphyrins were synthesized readily by (3 + 2) condensation of benzodipyrrole-derived diol and para-benzitripyrrane in the presence of 0.5 equiv of TFA in CH₂Cl₂ under inert atmosphere conditions accompanied by DDQ oxidation in open air. The crude compounds were separated by basic alumina column chromatography and afforded pure fused benzo-benzisapphyrins in 20-22% yields. The fused sapphyrins were characterized in detail by high-resolution mass spectrometry (HRMS) and one-dimensional (1D) and two-dimensional (2D) NMR spectroscopy. The ¹H NMR spectra recorded at both 298 and at 233 K clearly exhibited the presence of a strong diatropic ring current in benzo-benzisapphyrins, and the macrocycles are of aromatic nature. The DFT-optimized structure of benzo-benzisapphyrin revealed that the macrocycle was planar to a great extent due to the rigid structure of the dibenzopyrrole moiety, and the NICS(0) value of -11.2 ppm supports the aromatic nature of macrocycles. The absorption spectra of benzo-benzisapphyrins showed three weak Q bands approximately in the region of 650-900 nm and a strong Soret band at 480 nm, along with a shoulder band at ∼510 nm. The diprotonated derivative generated by the addition of excess TFA to the benzo-benzisapphyrin macrocycle exhibited bathochromically shifted absorption bands compared to the free base macrocycle.

Synthesis and Studies of Core-Modified Tellura Dithiasapphyrins

Four different aromatic meso-substituted tellurophene-containing dithiasapphyrins were synthesized by acid-catalyzed [3+2] condensation of 16-telluratripyrrane with bithiophene diol in 22-23% yields. The structural, spectral, and electrochemical properties of tellura dithiasapphyrins were studied and compared with those of previously reported aza (pyrrole)- and other heterocycle (furan, thiophene, and selenophene)-containing dithiasapphyrins. Nuclear magnetic resonance studies indicated that the tellurophene ring in tellura dithiasapphyrins is in the normal conformation, facing toward the inner core, but flips in diprotonated derivatives to an inverted conformation, facing away from the macrocyclic core, unlike aza- and other heterocycle-containing dithiasapphyrins in which pyrrole and the corresponding heterocycle ring always prefer to be in inverted conformation in their neutral and protonated forms. The crystal structure obtained for one of the tellura dithiasapphyrins showed that the macrocycle is highly planar and the tellurophene ring is in the normal conformation. The absorption spectra of tellura dithiasapphyrins exhibited slight hypsochromic shifts compared to those of pyrrole- and other heterocycle-containing dithiasapphyrins. The redox studies indicated that the tellura dithiasapphyrins are electron deficient and readily undergoes reductions. Density functional theory and nuclear independent chemical shift studies indicated that the macrocycles are aromatic, and the computational results closely matched the experimental observations.

Tailor-made aromatic porphyrinoids with NIR absorption

The highlight of this article is the recent progress in the state-of-the-art synthetic design and isolation of artificial porphyrinoids by swapping pyrrole component(s) with diverse functionalized pyrrolic(heterocyclic)/carbacycle building block(s) to compare the impact on the electronic absorption spectra and aromaticity of the incorporated isomeric/expanded porphyrinoids. Attention has been directed towards five distinct criteria of utilizing functionalized pyrrolic(heterocyclic)/aromatic hydrocarbons as synthons for NIR absorbing aromatic isomeric (N-confusion)/expanded porphyrinoids (with five/six heterocycles): (i) fused or annelated pyrrole (heterocycle), (ii) functionalized bi-pyrrole/bi-thiophene/bi-furan building blocks, (iii) azulene based carbacycle building block, (iv) vinylogous aromatic carbacycle/heterocycle(s) building block and (v) N-confused pyrrole ring(s), and N-confused fused pyrrole ring(s) leading to π-extension. These hybrid porphyrinoids are ideal candidates for basic research into macrocyclic aromaticity and for many potential applications owing to NIR absorption.

21-Carba-23-oxaporphyrinoids and 21-oxo-21-carba-23-oxaporphyrinoids: macrocyclic π-conjugation involving the carbonyl moiety

Aromaticity of 21-oxo-21-carba-23-oxachlorin resulted from a predominant dipolar contributor. Nonaromaticity of 21-oxo-21-carba-23-oxaporphyrin reflects a participation of canonical aromatic and antiaromatic forms engaged in a peculiar “tug of war”.

Doubly fused fluorene embedded heterosapphyrins

Synthesis and studies of first examples of nonaromatic doubly fused fluorene embedded heterosapphyrins and their intermediate macrocycles, monofused fluorene embedded hetero calixsapphyrins are reported.

NIR absorbing aromatic (antiaromatic) vinylogous carbasapphyrins (3.3.1.0.1) with built-in fused dipolar aromatic hydrocarbon: synthesis and characterization

Variants of vinylogous core modified carbasapphyrins with a built-in fused dipolar aromatic hydrocarbon moiety paving the way to a strong diatropicity/paratropicity with vis-NIR absorption.

Stability, Aromaticity, and Photophysical Behaviors of Macrocyclic Molecules: A Theoretical Analysis

The macrocyclic molecules with terthiophene (TTH) isomers unit exhibit intriguing properties in terms of aromaticity, stability, and absorption. In this work, we theoretically designed a series of macrocyclic molecules featured with TTH and dithienothiophene (DTT) π-conjugated building units, which are used to permute pyrrole unit in porphyrin skeleton. Density functional theory and time-dependent DFT methods are used to evaluate the performance of the designed molecules. Our simulations show that molecules 1–3 exhibit excellent optoelectronic performance. Specifically, the molecule with the DTT unit is more stable than the one with TTH unit in terms of aromaticity and aromatic stabilization energy. This is because DTT unit enhances the coplanarity of the molecular material, facilitating electronic communication. Calculation of vertical electronic excitations suggests the absorption feature of these molecules is mainly contributed by the electronic excitations of higher occupied molecular orbital (HOMO) → lowest unoccupied molecular orbital (LUMO)+1 and HOMO-1 → LUMO. Judging from the key parameters determining the overall performance, 3 stands out because of its good planarity, large HOMO–LUMO gap, and strong aromaticity among all molecules. Interestingly, molecule 1 has the current density flow distributes around the outer section of TTH unit; in contrast, molecule 3 with DTT unit has the current density flow located at the inner section of DTT, which is beneficial for stability and aromaticity. Second-order perturbation energies are calculated to rationalize this observation. We expect that these research results can provide valuable insights into the rational design of novel molecular materials for a variety of applications.

Synthesis and Characterization of N-Methylporphyrins, Heteroporphyrins, Carbaporphyrins, and Related Systems

MacDonald-type "3 + 1" condensations of an N-methyltripyrrane with a series of dialdehydes afforded a matched set of N-methylporphyrins, N-methylheteroporphyrins, N-methyloxybenziporphyrin, N-methyloxypyriporphyrin, N-methyltropiporphyrin, and a N-methylcarbaporphyrin aldehyde. meso-Unsubstituted heteroporphyrins have been little explored previously, and this strategy was also used to prepare N-unsubstituted 21-oxa-, 21-thia-, and 21-selenaporphyrins. In every case, the N-methylporphyrinoids exhibited weaker, bathochromically shifted UV-Vis absorptions compared to their core unsubstituted congeners. However, proton NMR spectroscopy demonstrated that these derivatives retained strong diamagnetic ring currents and the presence of the internal alkyl substituents had little effect on the global aromatic characteristics. Nevertheless, the UV-Vis spectra of N-methyl-oxybenzi- and N-methyl-oxypyriporphyrins were dramatically altered and gave greatly weakened absorptions. N-Methyl-oxybenzi- and N-methyltropiporphyrins reacted with palladium(II) acetate to give stable palladium(II) complexes, demonstrating that N-alkylation alters the metalation properties for these carbaporphyrinoids. The organometallic derivatives also retained strongly aromatic properties, and the proton NMR spectra showed the N-methyl resonances near -3 ppm. N-Methylcarbaporphyrin-2-carbaldehyde also gave a palladium(II) complex, but this gradually rearranged at higher temperatures to afford a C-methyl complex. The results demonstrate that core alkylation of porphyrinoids greatly alters the reactivity and spectroscopic properties for these systems.

Development of Heterocycle-Substituted and Fused Azulenes in the Last Decade (2010-2020)

Azulene derivatives with heterocyclic moieties in the molecule have been synthesized for applications in materials science by taking advantage of their unique properties. These derivatives have been prepared by various methods, involving electrophilic substitution, condensation, cyclization, and transition metal-catalyzed cross-coupling reactions. Herein, we present the development of the synthetic methods, reactivities, and physical properties for the heterocycle-substituted and heterocycle-fused azulenes reported in the last decade.

Dicarba[26]hexaporphyrinoids(1.1.1.1.1.1) with an Embedded Cyclopentene Moiety-Conformational Switching

Incorporation of cyclopentene fragments into a skeleton of parental [26]hexaphyrin(1.1.1.1.1.1) afforded extended carbaporphyrinoids: 31,34-dicarbahexa[26]chlorin and its derivatives: the first externally substituted by ethoxy and 2,4,6-trimethylbenzylidene groups and the second one formed by selective oxidation of one cyclopentene ring. Macrocycles adopt dumbbell-shaped conformations with two meso hydrogen atoms located inside the macrocyclic cavity. Protonation of 31,34-dicarba[26]hexachlorins provided dications existing in dumbbell-shaped and rectangular conformations.

Expanded Carbaporphyrinoids

This Review outlines the progress in the field of synthetic expanded carbaporphyrinoids. The evolution of this topic is demonstrated with expanded porphyrin-inspired systems with a variety of incorporated entities that introduce one or more carbon atoms into the cavity. The discussion starts with platyrins-the macrocycles that were identified as parent molecules of not only the expanded carbaporphyrinoids, but the carbaporphyrinoid class in general. After historic considerations, the plethora of expanded porphyrin-like macrocycles containing N-confused or neo-confused pyrrole motifs and different carbocyclic subunits are presented. Special emphasis is given to applications of expanded carbaporphyrinoids in different areas, including organometallic chemistry, switching systems, or aromaticity, concluding with the demonstration of a covalent cage based on an expanded carbaporphyrinoid.

Dibenzoylbenzodipyrroles: Key Precursors for the Synthesis of Fused meso-Aryl Sapphyrins

A simple strategy has been developed for the synthesis of α,α'-dibenzoylbenzodipyrroles, which are key synthons for the synthesis of fused porphyrinoids. α,α'-Dibenzoylbenzodipyrroles were characterized by high-resolution mass spectrometry (HRMS), NMR, and X-ray crystallography. To show the use of α,α'-dibenzoylbenzodipyrrole, we synthesized five different fused meso-aryl sapphyrins under acid-catalyzed reaction conditions. α,α'-Dibenzoylbenzodipyrrole was reduced to diol and condensed with five different tripyrranes such as aza, oxa, thia, selena, and telluratripyrranes under mild acid-catalyzed conditions to afford fused meso-aryl sapphyrins in 15-18% yields. One-dimensional (1D) and two-dimensional (2D) NMR studies revealed that in fused sapphyrins, the furan ring in oxabenzosapphyrin and the pyrrole ring in benzosapphyrin, which are present opposite to the benzodipyrrole moiety, attained ring inversion (inverted sapphyrins), whereas the selenophene ring in selenabenzosapphyrin and the tellurophene ring in tellurabenzosapphyrin did not show ring inversion (normal sapphyrins). However, thiabenzosapphyrin exhibits both normal and inverted conformations in different ratios. All fused sapphyrins showed typical aromatic absorption features; however, the absorption features of normal fused sapphyrins are different from the inverted fused sapphyrins. Redox studies indicate that normal fused sapphyrins are difficult to oxidize but easier to reduce compared to inverted fused sapphyrins. Density functional theory (DFT) studies support the experimental observations.

Synthesis of internally alkylated azuliporphyrins

Examples of internally alkylated azuliporphyrins were prepared by MacDonald-type “3 + 1” condensations. 2-Methyl- and 2-ethylazulene reacted with an acetoxymethylpyrrole in the presence of an acid catalyst to give azulitripyrranes. Following cleavage of the terminal protective groups, condensation with a diformylpyrrole in the presence of hydrochloric acid and oxidation with ferric chloride afforded 21-alkylazuliporphyrins. An azulene dialdehyde similarly reacted with an [Formula: see text]-methyltripyrrane to generate a 23-methylazuliporphyrin. The products could only be isolated in protonated form and the free-base internally alkylated azuliporphyrins proved to be unstable. Nevertheless, the dications are highly diatropic and the internal alkyl group resonances were shifted upfield to beyond -3 ppm. Reaction of a 23-methylazuliporphyrin with palladium(II) acetate primarily afforded a palladium(II) complex with loss of the internal methyl substituent. However, two palladium(II) benzocarbaporphyrins were also identified that were formed by sequential oxidative ring contraction and methyl group migration. Internally alkylated azuliporphyrins provide new insights into the reactivity of the system and the results show that the introduction of alkyl substituents within porphyrinoid cavities greatly modifies the properties of these structures.

21-Carbaporphyrin: a cyclopentadiene moiety entrapped into a porphyrin scaffold

This minireview underscores the chemistry of 21-carbaporphyrins containing a plain cyclopentadiene moiety. Thus the cyclopentadiene incorporation afforded two 21-carbaporphyrin series represented by meso-tetraaryl-21-carbaporphyrin and [Formula: see text]-alkylated 21-carbaporphyrin with their properties evidently controlled by the nature of perimeter substitution. The synthetic strategy, physicochemical characterization and some insight in coordination properties of 21-carbaporphyrins have been illustrated. The formation of palladium(II), rhodium(III) and gold(III) meso-tetraaryl-21-carbaporphyrins via unprecedented intramolecular contractions of meta-benzi- or para-benziporphyrins has been also addressed.

Synthesis of Azulitriphyrins(1.2.1) and Related Benzocarbatriphyrins

Bis(pyrrolylmethyl)azulene dialdehydes underwent intramolecular McMurry coupling, and following oxidation with DDQ and addition of trifluoroacetic acid, gave aromatic azulitriphyrin cations. The proton NMR spectra for these contracted carbaporphyrinoids showed the internal CH upfield at ca. 2 ppm, while the bridging methine units appeared downfield between 8 and 10 ppm, demonstrating that the macrocycles possess significant 14π electron diamagnetic ring currents. Although protonated azulitriphyrins(1.2.1) proved to be very stable, the free base forms were unstable and could not be isolated. Treatment of an azulitriphyrin with KOt-Bu-t-BuOOH gave rise to oxidative ring contractions that afforded the first examples of benzocarbatriphyrins. These contracted porphyrinoids also exhibit aromatic ring currents, and the internal CH resonances shifted upfield to 0.5-0.7 ppm. Protonation afforded cations with slightly enhanced diatropic properties. Nucleus independent chemical shift and anisotropy of induced current density calculations confirmed that benzocarbatriphyrins are 14π electron delocalized aromatic systems that bypass the fused arene units.

Azulichlorins and Benzocarbachlorins Derived Therefrom

Acid-catalyzed condensation of azulidipyrrane aldehydes with a dihydrodipyrrin carbaldehyde afforded the first examples of azulichlorins. These macrocyclic products were isolated in a monoprotonated form, and the free bases proved to be somewhat unstable. The monocations were strongly diatropic, and proton NMR spectroscopy showed the internal C-H at ca. -2 ppm. Addition of TFA gave the related dications, but these exhibited significantly reduced aromatic ring currents. Reaction of an azulichlorin with tert-butyl hydroperoxide and KOH in dichloromethane/methanol gave a benzocarbachlorin and two related aldehydes. The UV-vis spectrum for the benzocarbachlorin showed a split Soret band at 414 and 430 nm, together with a strong chlorin-like absorption at 684 nm. The proton NMR spectrum indicated that the carbachlorin is strongly aromatic and the internal C-H was observed at -4.64 ppm. Addition of TFA afforded a C-protonated dication with a significantly increased diatropic ring current. The proton NMR spectrum, NICS calculations, and AICD plots indicated that the system favors a 22π electron delocalization pathway that runs through the fused benzo unit. Addition of TFA to the benzocarbachlorin aldehydes primarily led to the formation of monocations, and the generation of C-protonated dications was no longer favored due to the presence of electron-withdrawing formyl moieties.

Synthesis of Unsymmetrical Heterobenzisapphyrins

Two examples of highly unsymmetrical heterobenzisapphyrins containing one benzene, two pyrroles, one furan, and one thiophene ring connected via four meso-carbons and one direct bond were prepared over a sequence of five steps in 8-9% yields. The X-ray structure revealed that the furan ring was inverted from the macrocyclic framework and the macrocycle was nearly planar. Spectral and electrochemical studies indicated that the macrocycle was nonaromatic in nature due to lack of conjugation.

Synthesis of Nonaromatic and Aromatic Dithia Benzisapphyrins

A series of [24π] dithia meta-benzisapphyrins and [22π] dithia para-benzisapphyrins were synthesized by 3 + 2 condensation of appropriate benzitripyrrane with bithiophene diol under mild acid catalyzed conditions. The dithia m-benzisapphyrins and dithia p-benzisapphyrins were thoroughly characterized by HR-MS, 1D and 2D NMR, absorption, and electrochemical techniques. Our studies showed that dithia m-benzisapphyrins are nonaromatic, whereas the dithia p-benzisapphyrins are aromatic in nature. Thus, we demonstrated here that the dithiabenzisapphyrins can be made aromatic by replacing the m-phenylene moiety of the benzisapphyrin macrocycle with a p-phenylene unit. Furthermore, the studies also indicated that the aromaticity of the dithia p-benzisapphyrins was relatively more compared to the reported heterosapphyrins. The structural and spectral characteristics including aromaticity of the m-benzisapphyrins and p-benzisapphyrins were also discussed with the help of DFT, NICS, and TD-DFT studies.

Gold-catalyzed cascade cyclization of N-propargyl ynamides: rapid access to functionalized indeno[1,2-c]pyrroles

A new gold-catalyzed cascade cyclization of N-propargyl ynamides involving a presumable vinyl cation intermediate has been developed, allowing the efficient and practical synthesis of various functionalized indeno[1,2-c]pyrroles.

What’s in a name? The MacDonald condensation

In 1960, MacDonald and coworkers introduced a new method for porphyrin synthesis that involved the acid-catalyzed condensation of dipyrrylmethane dialdehydes with [Formula: see text],[Formula: see text]-diunsubstituted dipyrrylmethanes or the related dicarboxylic acids, followed by an air oxidation. The key bond forming steps entail electrophilic substitution at two pyrrole units with the aldehyde moieties to generate, following elimination of water, a 5,15-dihydroporphyrin or porphodimethene intermediate. Following addition of sodium acetate, or in later procedures zinc acetate, the dihydroporphyrins readily air oxidize to the fully aromatic porphyrin system. This strategy, which parallels chemistry contemporaneously developed by R. B. Woodward at Harvard for the total synthesis of chlorophyll [Formula: see text], demonstrated that dipyrrylmethanes were sufficiently stable to be utilized as intermediates in porphyrin syntheses and that porphodimethene formation circumvented acidolytic scrambling reactions that might lead to isomeric porphyrin products. This type of chemistry was later adapted by Johnson, Woodward and others to prepare porphyrin-type systems by a “3 + 1” strategy, or expanded porphyrins by “3 + 2” or other combinations of oligopyrrolic precursors. In recent years, the term “MacDonald condensation” has been increasingly used to describe other types of chemistry involving oligopyrrolic intermediates. Following on from a historical review of this area, guidelines for the identification of MacDonald-type reactions are proposed.

Flexible Porphyrinoids

This review underscores the conformational flexibility of porphyrinoids, a unique class of functional molecules, starting from the smallest triphyrins(1.1.1) via [18]porphyrins(1.1.1.1) and concluding with a variety of expanded porphyrinoids and heteroporphyrinoids, including the enormous [96]tetracosaphyrin(1.0.1.0.1.0.1.0.1.0.1.0.1.0.1.0.1.0.1.0.1.0.1.0). The specific flexibility of porphyrinoids has been documented as instrumental in the designing or redesigning of macrocyclic frames, particularly in the search for adjustable platforms for coordination or organometallic chemistry, anion binding, or mechanistic switches in molecular devices. A structural prearrangement to coordinate one or more metal ions has been outlined. The coverage of the topic focuses on representative examples of geometry or conformational rearrangements for each selected class of the numerous porphyrinoids accordingly categorized by the number of built-in carbo- or heterocycles.

Out of the Blue! Azuliporphyrins and Related Carbaporphyrinoid Systems

First reported in 1997, azuliporphyrins have proven to be a truly remarkable family of porphyrin analogues. In this system, although the porphyrin framework is retained, one of the pyrrolic moieties has been replaced by an azulene unit. Azulene favors electrophilic substitution at the 1,3-positions, which are structurally analogous to the α-positions in pyrrole, and this property facilitates the construction of azulene-containing porphyrinoid systems. Azuliporphyrins were first prepared from tripyrranes and 1,3-azulenedicarbaldehyde using a "3 + 1" variant on the MacDonald reaction. Subsequently, azulenes were shown to react with acetoxymethylpyrroles under acidic conditions to generate azulitripyrranes that could be utilized in a back-to-front "3 + 1" methodology to form azuliporphyrins and related heteroporphyrinoids. In addition, the favorability of azulenes toward 1,3-substitution was applied to one-pot syntheses of tetraarylazuliporphyrins and calix[4]azulenes. Azuliporphyrins have significant diatropic character that is greatly enhanced upon protonation. They have been shown to form organometallic complexes with Ni(II), Pd(II), Pt(II), Ir(III), Rh(III), and Ru(II) and undergo selective oxidations at the internal carbon with copper(II) or silver(I) salts to afford 21-oxyazuliporphyrins. In addition, oxidative ring contractions readily occur under basic conditions in the presence of peroxides to give benzocarbaporphyrins, and this reactivity provides access to tetraarylbenzocarbaporphyrins and their organometallic derivatives. A diazulenylmethane dialdehyde has been shown to react with dipyrrylmethanes in the presence of HCl or HBr to give diazuliporphyrins that were isolated in a monoprotonated form, and metalation with palladium(II) acetate afforded a stable zwitterionic palladium(II) complex. Equally intriguing dicarbaporphyrinoids incorporating indene and azulene rings have been reported, and these systems exhibit significant aromatic character. Recent studies have demonstrated that calixazulenes form supramolecular complexes with quaternary ammonium salts and afford a 1:1 complex with C60. In addition, conjugated structures have been prepared from calixazulenes that are structurally related to quatyrin, the theoretically important hydrocarbon analogue of the porphyrins. Examples of expanded azuliporphyrinoids have also been described. These azulene-containing porphyrinoids exhibit unique and complex reactivity that compares favorably with better studied porphyrin analogue systems such as the N-confused porphyrins, and azuliporphyrin derivatives show promise in the development of new catalytic systems.

Chemical and electrochemical dimerization of BODIPY compounds: electrogenerated chemiluminescent detection of dimer formation

The electrochemistry of several difluoroboradiaza-s-indacene (BODIPY) compounds lacking substituent groups in the meso (8)- and/or 3 (α)-positions was investigated. Chemical and electrochemical dimerization was demonstrated, and the dimerization depended on the character of substitution. The chemical dimerization was achieved by oxidative coupling using FeCl(3) in CH(2)Cl(2) at 0 °C. The electrochemical dimerization proceeded via anodic oxidation to the radical cation and monitored by both cyclic voltammetry (CV) and electrogenerated chemiluminescence (ECL). An available open 3-position was important for the formation of the dimer. The resulting 3,3'-dimer produced a second peak in the CV oxidation and also the appearance of a longer wavelength ECL peak at 656 nm, which is considerably shifted from the parent peak at 532 nm. No dimerization was seen for BODIPY molecules in which only the meso 8-position was unsubstituted, either by chemical or electrochemical means, demonstrating that dimerization occurs at position 3.