Two-Photon Sensor for Metal Ions Derived from Azacrown Ether

Improved Syntheses of 4'-Vinylbenzo-3n-Crown-n Ethers (n = 5-7)

A convenient, high-yielding, and scalable synthetic approach to the construction of 4'-vinylbenzocrown ethers has been developed, which employs a decarboxylation and cyclization strategy. Using this method, a wide-ranging class of vinylbenzocrown ethers can be efficiently obtained. The identity of the crown ethers was further established using single-crystal X-ray diffraction studies. Two of the vinylbenzocrown ethers crystallize with water, affording infinite supramolecular assemblies containing hydrogen-bonded water molecules.

Strong solvent dependence of linear and non-linear optical properties of donor–acceptor type pyrrolo[3,2-b]pyrroles

The pyrrolo[3,2-b]pyrrole core was determined to be an efficient linker allowing the conjugation of peripheral benzene rings. The resulting dipolar compounds displayed strong solvatochromism of fluorescence.

Probing ternary complex equilibria of crown ether ligands by time-resolved fluorescence spectroscopy

Ternary complex formation with solvent molecules and other adventitious ligands may compromise the performance of metal-ion-selective fluorescent probes. As Ca(II) can accommodate more than 6 donors in the first coordination sphere, commonly used crown ether ligands are prone to ternary complex formation with this cation. The steric strain imposed by auxiliary ligands, however, may result in an ensemble of rapidly equilibrating coordination species with varying degrees of interaction between the cation and the specific donor atoms mediating the fluorescence response, thus diminishing the change in fluorescence properties upon Ca(II) binding. To explore the influence of ligand architecture on these equilibria, we tethered two structurally distinct aza-15-crown-5 ligands to pyrazoline fluorophores as reporters. Due to ultrafast photoinduced electron-transfer (PET) quenching of the fluorophore by the ligand moiety, the fluorescence decay profile directly reflects the species composition in the ground state. By adjusting the PET driving force through electronic tuning of the pyrazoline fluorophores, we were able to differentiate between species with only subtle variations in PET donor abilities. Concluding from a global analysis of the corresponding fluorescence decay profiles, the coordination species composition was indeed strongly dependent on the ligand architecture. Altogether, the combination of time-resolved fluorescence spectroscopy with selective tuning of the PET driving force represents an effective analytical tool to study dynamic coordination equilibria and thus to optimize ligand architectures for the design of high-contrast cation-responsive fluorescence switches.

Ultra-sensitive and selective Hg2+ chemosensors derived from substituted 8-hydroxyquinoline analogues

A mercury concentration of 15 ppt can be selectively detected, in aqueous medium, thanks to a thiophosphinatylated 8-hydroxyquinoline sensor.

A ratiometric fluorescent molecular probe with enhanced two-photon response upon Zn2+ binding for in vitro and in vivo bioimaging

The ratiometric two-photon (2P) probe GBC shows enhanced 2P activity upon zinc ion binding and has been used for zinc ion imaging in vitro and in vivo.

Recent development of two-photon fluorescent probes for bioimaging

Fluorescent probes are essential tools for studying biological systems.

Two-photon fluorescent probes for metal ions

Two-photon microscopy (TPM) has become an indispensible tool in biology and medicine owing to the capability of imaging the intact tissue for a long period of time. To make it a versatile tool in biology, a variety of two-photon probes for specific applications are needed. In this context, many research groups are developing two-photon probes for various applications. In this Focus Review, we summarize recent results on model studies and selected examples of two-photon probes that can detect intracellular free metal ions in live cells and tissues to provide a guideline for the design of useful two-photon probes for various in vivo imaging applications.

Metal Ion-Responsive Fluorescent Probes for Two-Photon Excitation Microscopy

Metal ion-responsive fluorescent probes are powerful tools for visualizing labile metal ion pools in live cells. To take full advantage of the benefits offered by two-photon excitation microscopy, including increased depth penetration, reduced phototoxicity, and intrinsic 3D capabilities, the photophysical properties of the probes must be optimized for nonlinear excitation. This review summarizes the challenges associated with the design of two-photon excitable fluorescent probes and labels and offers an overview on recent efforts in developing selective and sensitive reagents for the detection of metal ions in biological systems.

Fluorene-based metal-ion sensing probe with high sensitivity to Zn2+ and efficient two-photon absorption

The photophysical, photochemical, two-photon absorption (2PA) and metal ion sensing properties of a new fluorene derivative (E)-1-(7-(4-(benzo[d]thiazol-2-yl)styryl)-9,9-bis(2-(2-ethoxyethoxy)ethyl)-9H-fluoren-2-yl)-3-(2-(9,10,16,17,18,19,21,22,23,24-decahydro-6H dibenzo[h,s][1,4,7,11,14,17]trioxatriazacycloicosin-20(7H)-yl)ethyl)thiourea (1) were investigated in organic and aqueous media. High sensitivity and selectivity of 1 to Zn(2+) in tetrahydrofuran and a water/acetonitrile mixture were shown by both absorption and fluorescence titration. The observed complexation processes corresponded to 1:1 stoichiometry with the range of binding constants approximately (2-3) x 10(5) M(-1). The degenerate 2PA spectra of 1 and 1/Zn(2+) complex were obtained in the 640-900 nm spectral range with the maximum values of two-photon action cross section for ligand/metal complex approximately (90-130) GM, using a standard two-photon induced fluorescence methodology under femtosecond excitation. The nature of the 2PA bands was analyzed by quantum chemical methods and a specific dependence on metal ion binding processes was shown. Ratiometric fluorescence detection (420/650 nm) provided a good dynamic range (10(-4) to 10(-6) M) for detecting Zn(2+), which along with the good photostability and 2PA properties of probe 1 makes it a good candidate in two-photon fluorescence microscopy imaging and sensing of Zn ions.

Metal ion sensing novel calix[4]crown fluoroionophore with a two-photon absorption property

1,3-Alternate calix[4]arene-based fluorescent chemosensors bearing two-photon absorbing chromophores have been synthesized, and their sensing behaviors toward metal ions were investigated via absorption band shifts as well as one- and two-photon fluorescence changes. Free ligands absorb the light at 461 nm and weakly emit their fluorescence at 600 nm when excited by UV-vis radiation at 461 nm, but no two-photon excited fluorescence is emitted by excitation at 780 nm. Addition of an Al(3+) or Pb(2+) ion to a solution of the ligand causes a blue-shifted absorption and enhanced fluorescence due to a declined resonance energy transfer (RET) upon excitation by one- and two-photon processes. Addition of a Pb(2+) ion to a solution of 1.K(+) results in a higher fluorescence intensity than the original 1.Pb(2+) complex regardless of one- or two-photon excitation, due to the allosteric effect induced by the complexation of K(+) with a crown loop.

Synthesis, Fluorescence, and Two-Photon Absorption of a Series of Elongated Rodlike and Banana-Shaped Quadrupolar Fluorophores: A Comprehensive Study of Structure–Property Relationships

An extensive series of push-push and pull-pull derivatives was prepared from the symmetrical functionalization of an ambivalent core with conjugated rods made from arylene-vinylene or arylene-ethynylene building blocks, bearing different acceptor or donor end-groups. Their absorption and photoluminescence, as well as their two-photon-absorption (TPA) properties in the near infrared (NIR) region, were systematically investigated to derive structure-property relationships and to lay the guidelines for both spectral tuning and amplification of molecular TPA in the target region. Whatever the nature of the core or of the connectors, push-push systems were found to be more efficient than pull-pull systems, and planarization of the core (fluorene versus biphenyl) always leads to an increase in the TPA cross sections. In contrast, increasing the conjugation length as well as replacement of a phenylene moiety by a thienylene moiety in the conjugated rods did not necessarily lead to increased TPA responses. The present study also demonstrated that the topology of the conjugated rods can dramatically influence the TPA properties. This is of particular interest in terms of molecular engineering for specific applications, as both TPA properties and photoluminescence characteristics can be considerably affected. Thus, it becomes possible to optimize the transparency/TPA and fluorescence/TPA efficiency trade-offs for optical limiting in the red-NIR region (700-900 nm) and for two-photon-excited fluorescence (TPEF) microscopy applications, respectively.

Novel Spiro-Configured PET Chromophores Incorporating 4,5-Diazafluorene Moiety as an Electron Acceptor

[reaction: see text] We have synthesized novel spiro-bridged chromophores incorporating a 4,5-diazafluorene unit as the electron acceptor (A) and aryl amino groups as donor (D) moieties. The orthogonal D-A configuration limits ground-state D-A interactions but allows efficient PET reactions. The PET efficiency was modulated by the electronic characteristics of the donor and by the D-A distance. Preliminary studies showed that the PET process can be manipulated through metal ion complexation of the 4,5-diazafluorene moiety.

One- and Two-Photon Absorption and Emission Properties of a Zn(II) Chemosensor

This paper presents the synthesis and two photon-induced absorption (TPA) properties of a functionalized distyrylbenzene (DSB) 1 containing a tetra-azacyclododecane (cyclen) receptor for Zn(II). The influence of Zn(II) on one- and two-photon absorption characteristics of 1 has been investigated in dimethyl sulfoxide. The experiments show that the TPA action spectrum of uncomplexed 1, at 750 nm employing nanosecond-long excitation pulses, is 5 times more intense than that of the complexed form. This moderate contrast between the bound and unbound species confirms, however, the potential of this design scheme for the development of molecular structures with enhanced sensitivity and contrast to be used as Zn(II) sensors through TPA-induced fluorescence microscopy.

Proton-Triggered Octopolar NLO Chromophores

C(3)-symmetric, octopolar 1,3,5-alkynylbenzenes with terminal pyridyl substituents are presented which show an increase up to 17-fold in the second-order NLO activity upon protonation while maintaining their octopolar character, as confirmed by the depolarization ratios measured.

Novel 2,1,3-Benzothiadiazole-Based Red-Fluorescent Dyes with Enhanced Two-Photon Absorption Cross-Sections

This paper reports the two-photon absorbing and orange-red fluorescence emitting properties of a series of new 2,1,3-benzothiadiazole (BTD)-based D-pi-A-pi-D-type and star-burst-type fluorescent dyes. In the D-pi-A-pi-D-type dyes 1-6, a central BTD core was connected with two terminal N,N-disubstituted amino groups via various pi-conjugated spacers. The star-burst-type dyes 8 and 10 have a three-branched structure composed of a central core (benzene core in 8 and triphenylamine core in 10) and three triphenylamine-containing BTD branches. All the BTD-based dyes displayed intense orange-red color fluorescence in a region of 550-689 nm, which was obtained by single-photon excitation with good fluorescent quantum yield up to 0.98 as well as by two-photon excitation. Large two-photon absorption (TPA) cross-sections (110-800 GM) of these BTD dyes were evaluated by open aperture Z-scan technique with a femtosecond Ti/sapphire laser. The TPA cross-sections of D-pi-A-pi-D-type dyes 2-6 with a benzene, thiophene, ethene, ethyne, and styrene moiety, respectively, as an additional pi-conjugated spacer are about 1.5-2.5 times larger than that of 1c with only a benzene spacer. The TPA cross-sections significantly increased in three-branched star-burst-type BTDs 8 (780 GM) with a benzene core and 10 (800 GM) with a triphenylamine core, which are about 3-5 times larger than those of the corresponding one-dimensional sub-units 9 (170 GM) and 11 (230 GM), respectively. The ratios of sigma/e(pi) between three-branched and one-dimensional dyes were 6.5:3.8 (for 8 and 9) and 6.0:4.0 (for 10 and 11), which are larger than those predicted simply on the basis of the chromophore number density (1:1), according to a cooperative enhancement of the two-photon absorbing nature in the three-branched system.

Photophysics of a Series of Efficient Fluorescent pH Probes for Dual-Emission-Wavelength Measurements in Aqueous Solutions

This paper evaluates the 5-aryl-2-pyridyloxazole backbone to engineer donor-acceptor fluorescent pH probes after one- or two-photon absorption. Parent fluorophores, as well as derivatives that can be used to label biomolecules, can be easily obtained in good yields. These molecules exhibit a large one-photon absorption in the near-UV range, and a strong fluorescence emission that covers the whole visible domain. The 5-aryl-2-pyridyloxazole derivatives also possess significant cross sections for two-photon absorption. Upon pyridine protonation, large shifts were observed in the absorption spectra after one- and two-photon excitation, as well as in the emission spectra. This feature was used to measure the pK(a) of the investigated compounds that range between 2 and 8. In most of the investigated derivatives, the pK(a) increased upon light excitation and protonation exchanges took place during the lifetime of the excited state, as shown by phase-modulation fluorometry analysis. Several 5-aryl-2-pyridyloxazole derivatives are suggested as efficient probes to reliably measure the pH of aqueous solutions by means of ratiometric methods that are dependent on fluorescence emission.

Synthesis, Structures, and Photoinduced Electron Transfer Reaction in the 9,9‘-Spirobifluorene-Bridged Bipolar Systems

[reaction: see text] A series of 9,9'-spirobifluorene-bridged bipolar compounds DnAm bearing various n:m ratios for triarylamine (D) versus 1,3,4-oxadiazole-conjugated oligoaryl moiety (A) have been synthesized to investigate the corresponding photoinduced electron transfer (PET) property. The excitation behaviors were probed by steady-state absorption, emission, fluorescence solvatochromism, and femtosecond fluorescence up-conversion spectroscopy. The overall reaction dynamics can be rationalized by the rate of PET, in combination with solvent relaxation dynamics. It was found that the rate of PET is dependent on the anchored D/A ratio. The rate of D1A1 and D2A1 was resolved to be approximately 2.44 x 10(12) and 2.32 x 10(12) s(-)(1), respectively, while it is irresolvable in D1A2 and D2A2 (>6.6 x 10(12) s(-)(1)). In another approach, based on the comprehensive X-ray data, cyclic voltammetry, and absorption/emission spectra, the rate of photoinduced electron transfer was also qualitatively estimated. Fair comparisons were made between experimental and theoretical approaches to gain detailed insight into the PET for the titled systems.

Highly Selective Two-Photon Chemosensors for Fluoride Derived from Organic Boranes

[reaction: see text] Three organoboron compounds are shown to be two-photon fluorescent sensors for fluoride anion with high sensitivity and selectivity. The recognition mechanism is attributed to the unique steric structure of the bulky dimesitylboryl group and the Lewis acid-base interaction between trivalent boron atom and fluoride anion.