Rhodium-Catalyzed Regioselective Olefination Directed by a Carboxylic Group

Ruthenium-catalysed decarboxylative unsymmetric dual ortho-/meta-C-H bond functionalization of arenecarboxylic acids

Here, we describe a ruthenium-catalysed decarboxylative unsymmetric ortho-C-H azaarylation/meta-C-H alkylation via a traceless directing group relay strategy. The installation of a 2-pyridyl functionality via carboxyl directed ortho-C-H activation is critical to promote decarboxylation and enable meta-C-H bond alkylation to streamline the synthesis of 4-azaaryl-benzo-fused five-membered heterocycles. This protocol is characterized by high regio- and chemoselectivity, broad substrate scopes, and good functional group tolerance under redox-neutral conditions.

Transition Metal-Catalyzed C-H Functionalization Through Electrocatalysis

Electrochemically promoted transition metal-catalyzed C-H functionalization has emerged as a promising area of research over the last few decades. However, development in this field is still at an early stage compared to traditional functionalization reactions using chemical-based oxidizing agents. Recent reports have shown increased attention on electrochemically promoted metal-catalyzed C-H functionalization. From the standpoint of sustainability, environmental friendliness, and cost effectiveness, electrochemically promoted oxidation of a metal catalyst offers a mild, efficient, and atom-economical alternative to traditional chemical oxidants. This Review discusses advances in the field of transition metal-electrocatalyzed C-H functionalization over the past decade and describes how the unique features of electricity enable metal-catalyzed C-H functionalization in an economic and sustainable way.

A Fujiwara-Moritani-Type Alkenylation Using a Traceless Directing Group Strategy: A Rare Example of C-C Bond Formation towards the C2-Carbon of Terminal Alkenes

Herein we report, a rhodium-catalyzed Fujiwara-Moritani-type reaction of unactivated terminal alkenes and benzoic acid derivatives bearing electron donating residues under mild conditions. The acid functionality acts as a traceless directing group delivering products alkenylated in meta-position to the electron donating substituent in contrast to the usually obtained ortho- and para-substitution in Friedel-Crafts-type reactions. Remarkably, the new C-C bond is formed to the C2 of the terminal olefin, in contrast to similar reported transformations. Initially formed mixtures of exo- and endo-double bond isomers can be efficiently isomerized to the more stable endo-products.

Metal -free PhI(OAc)2-oxidized decarboxylation of propiolic acids towards synthesis of α-acetoxy ketones and insights into general decarboxylation with DFT calculations

A metal-free oxidative decarboxylation reaction of propiolic acids mediated by hypervalent iodine(III) reagents is described. This decarboxylative C-O bond-forming reaction used a combination of (diacetoxyiodo)benzene and aromatic, heteroaromatic or aliphatic propiolic acids to give the corresponding α-acetoxy ketones. Preliminary mechanistic studies based on both DFT calculations and high-resolution mass spectroscopy (HRMS) suggested that the reaction proceeded through decarboxylation to form a propargyl iodide intermediate. This reaction provides an attractive alternative to existing methods for the exclusive synthesis of α-acyloxy ketones.

Rhodium(III)-catalyzed oxidative cross-coupling of benzoxazinones with styrenes via C-H activation

Vinylarenes represent an important class of core skeleton embedded in natural products, organic materials, and pharmaceutical molecules. Therefore, numerous efforts have been devoted to developing efficient methods for their preparation. Among them, transition-metal-catalyzed oxidative coupling of arenes and alkenes has proved to be a powerful method due to its high atom and step economy. Although a wide range of oxidative alkenylations of arenes have been developed, the alkenes employed in most cases are still limited to electron-deficient alkenes. Reported herein is a Rh(III)-catalyzed C-H cross-coupling of benzoxazinones and simple unactivated styrenes to furnish a variety of vinylarene scaffolds. This established protocol is characterized by wide functional group compatibility, high yields, and excellent regio- and chemo-selectivity. Mechanistic studies and gram-scale experiments on this high-value conversion are disclosed. Moreover, the potential utility of this method was highlighted by a series of further transformations.

Enantioselective Synthesis of N-Benzylic Heterocycles by Ni/Photoredox Dual Catalysis

An asymmetric cross-coupling of α-N-heterocyclic trifluoroborates with aryl bromides using Ni/photoredox dual catalysis has been developed. This C(sp2)-C(sp3) cross-coupling provides access to pharmaceutically relevant chiral N-benzylic heterocycles in good to excellent enantioselectivity when bioxazolines (BiOX) are used as the chiral ligand. High-throughput experimentation significantly streamlined reaction development by identifying BiOX ligands for further investigation and by allowing for rapid optimization of conditions for new trifluoroborate salts.

Rh(III)-Catalyzed Enone Carbonyl/Ketone-Directed Aerobic C-H Olefination of Aromatics with Unactivated Olefins

A Rh(III)-catalyzed weak enone carbonyl/ketone-assisted aerobic oxidative C-H olefination of aromatics with unactivated alkenes has been developed. This protocol involves cross-dehydrogenative Heck-type olefination reaction of various substituted biologically relevant chalcones and aromatic ketones such as acetophenones and chromones with various functionalized unactivated olefins in moderate to good yields. Further, ortho-alkylation of chalcones with norbornene is also demonstrated. A possible reaction mechanism involving weak chelation-assisted C-H activation/insertion/β-hydride elimination was proposed and supported by the deuterium labeling studies.

Ru-Catalyzed C-H Arylation of Acrylic Acids with Aryl Bromides

In the presence of a [Ru(p-cymene)Cl₂]₂/triethylphosphine/lithium carbonate catalyst system, aryl bromides undergo (Z)-selective couplings with unprotected 2-arylacrylic acids to form (Z)-diarylacrylic acids. This vinylic C-H functionalization proceeds in high yields of up to 94% and (Z/E)-ratios of up to 99:1, tolerating a wide range of functional groups. Mechanistic studies indicate that the vinylic C-H activation proceeds via base-assisted cyclometalation rather than via a Heck-type mechanism, which explains its orthogonal stereoselectivity.

Toolbox for Distal C-H Bond Functionalizations in Organic Molecules

Transition metal catalyzed C-H activation has developed a contemporary approach to the omnipresent area of retrosynthetic disconnection. Scientific researchers have been tempted to take the help of this methodology to plan their synthetic discourses. This paradigm shift has helped in the development of industrial units as well, making the synthesis of natural products and pharmaceutical drugs step-economical. In the vast zone of C-H bond activation, the functionalization of proximal C-H bonds has gained utmost popularity. Unlike the activation of proximal C-H bonds, the distal C-H functionalization is more strenuous and requires distinctly specialized techniques. In this review, we have compiled various methods adopted to functionalize distal C-H bonds, mechanistic insights within each of these procedures, and the scope of the methodology. With this review, we give a complete overview of the expeditious progress the distal C-H activation has made in the field of synthetic organic chemistry while also highlighting its pitfalls, thus leaving the field open for further synthetic modifications.

Palladium-Catalyzed Three-Component Silylalkoxylation of 1,3-Diene with Alcohol and Disilane via Oxidative Coupling

A regioselective and Z-selective three-component silylalkoxylation of 1,3-diene using various alcohols, disilane, and a catalytic Pd/Cu/1,4-benzoquinone/O₂ system is established in this Letter. The reaction generates tetra-substituted allyl silanes containing allyl ether moieties in up to 80% isolated yield and on a 1-10 mmol scale via oxidative coupling. A wide variety of substrates, including benzyl alcohol derivates, aliphatic alcohols, and bioactive compounds such as cholesterol, are suitable for use in the developed reaction system.

Ru-Catalyzed (E)-Specific ortho-C-H Alkenylation of Arenecarboxylic Acids by Coupling with Alkenyl Bromides

In the presence of [p-cymene)RuCl₂]₂, (E)-configured alkenyl bromides couple with aromatic carboxylates to form ortho-vinylbenzoic acids. This C-H vinylation proceeds in high yields without any activating phosphine ligands and has an excellent functional group tolerance. Starting from commonly available (E/Z )-mixtures of alkenyl bromides, (E)-configured vinyl arenes or dienes are formed exclusively. Mechanistic studies show that this selectivity is achieved because the (E)-configured alkenyl bromides undergo a smooth coupling, whereas the (Z)-isomers are rapidly eliminated with the formation of alkynes.

Aerobic Oxidative C-H Olefination of Arylamides with Unactivated Olefins via a Rh(III)-Catalyzed C-H Activation

An efficient Rh(III)-catalyzed aerobic oxidative C-H alkenylation of arylamides with unactivated alkenes is described. The olefination reaction was compatible with various substituted arylamides including primary, secondary, and tertiary as well as functionalized unactivated olefins. Meanwhile, ortho mono/bis-alkylated arylamides were synthesized in the reaction of arylamides with norbornene. In the alkenylation reaction, molecular oxygen along with organic acid was used to regenerate the active catalyst for the next catalytic cycle. A possible reaction mechanism involving C-H activation/insertion/β-hydride elimination followed by aerobic oxidation was proposed and supported by the deuterium labeling studies.

Recent advances in transition metal-catalyzed olefinic C–H functionalization

Recent advances during 2015–2020 in the field of metal-catalyzed olefinic C–H functionalization are organized according to the metal center of the catalyst, with an emphasis on the similarities and differences among different catalysts.

Decarboxylative C–H alkylation of heteroarenes by copper catalysis

A copper-catalyzed decarboxylative C–H alkylation of heteroarenes with alkyl carboxylic acids has been realized.

Regioselective C-H Alkenylation and Unsymmetrical Bis-olefination of Heteroarene Carboxylic Acids with Ruthenium Catalysis in Water

An efficient weak carboxylate-assisted oxidative cross-dehydrogenative C-H/C-H coupling (CDC) of heteroarenes with readily available olefins has been devised employing water as green solvent under ruthenium(II) catalysis. The reaction is operationally simple, accommodates a large variety of heteroaromatic carboxylic acids as well as olefins, and facilitates a diverse array of high-value olefin-tethered heteroarenes in high yields (up to 87%). The potential of this ortho-C-H bond activation strategy has also been exploited toward tunable synthesis of densely functionalized heteroarenes through challenging unsymmetrical bis-olefination process in a one-pot sequential fashion. Mechanistic investigation demonstrates a reversible ruthenation process and C-H metalation step might not be involved in the rate-determining step.

Identification of key functionalization species in the Cp*Ir(III)-catalyzed-ortho halogenation of benzamides

Cp*Ir(iii) complexes have been shown to be effective for the halogenation of N,N-diisopropylbenzamides with N-halosuccinimide as a suitable halogen source. The optimized conditions for the iodination reaction consist of 0.5 mol% [Cp*IrCl2]2 in 1,2-dichloroethane at 60 °C for 1 h to form a variety of iodinated benzamides in high yields. Increasing the catalyst loading to 6 mol% and the time to 4 h enabled the bromination reaction of the same substrates. Reactivity was not observed for the chlorination of these substrates. A variety of functional groups on the para-position of the benzamide were well tolerated. Kinetic studies showed the reaction dependence is first order in iridium, positive order in benzamide, and zero order in N-iodosuccinimide. A KIE of 2.5 was obtained from an independent H/D kinetic isotope effect study. Computational studies (DFT-BP3PW91) indicate that a CMD mechanism is more likely than an oxidative addition pathway for the C-H bond activation step. The calculated functionalization step involves an Ir(v) species that is the result of oxidative addition of acetate hypoiodite that is generated in situ from N-iodosuccinimide and acetic acid.

Traceless directing groups: a novel strategy in regiodivergent C-H functionalization

The use of functional groups as internal ligands for assisting C-H functionalization, termed the chelation assisted strategy, is emerging as one of the most powerful tools for construction of C-C and C-X bonds from inert C-H bonds. However, there are various directing groups which cannot be either removed after functionalization or require some additional steps or reagents for their removal, thereby limiting the scope of structural diversity of the products, and the step and atom economy of the system. These limitations are overcome by the use of the traceless directing group (TDG) strategy wherein functionalization of the substrate and removal of the directing group can be carried out in a one pot fashion. Traceless directing groups serve as the most ideal chelation assisted strategy with a high degree of reactivity and selectivity without any requirement for additional steps for their removal. The present review overviews the use of various functional groups such as carboxylic acids, aldehydes, N-oxides, nitrones, N-nitroso amines, amides, sulfoxonium ylides and silicon tethered directing groups for assisting transition metal catalyzed C-H functionalization reactions in the last decade.

Cu-Catalyzed C-H Alkenylation of Benzoic Acid and Acrylic Acid Derivatives with Vinyl Boronates

An efficient Cu-catalyzed C-H alkenylation with acyclic and cyclic vinyl boronates was realized for the first time under mild conditions. The scope of the vinyl borons and the compatibility with functional groups including heterocycles are superior than Pd-catalyzed C-H coupling with vinyl borons, providing a reliable access to multisubstituted alkenes and dienes. Subsequent hydrogenation of the product from the internal vinyl borons will lead to installation of secondary alkyls.

meta-Selective olefination of fluoroarenes with alkynes using CO2 as a traceless directing group

Over the last few decades C-H olefination has received significant interest, due to the importance and usefulness of aryl olefins both as synthetic targets and intermediates. While a wide range of ortho-olefination protocols have been developed, only a small number of meta-olefinations are currently available. Importantly, the most common approach to meta-olefination, using a large meta-directing template, is not suitable for substrates such as fluorobenzenes, which cannot be derivatised. We report that the meta-selective olefination of fluoroarenes can be achieved via the use of CO2 as a traceless directing group, which can be easily installed and removed in a one-pot process. Furthermore, this approach avoids the use of stoichiometric Ag(i)-salts, commonly used in C-H olefinations, and affords complete meta- over ortho/para-regioselectivity.

Ruthenium-Catalyzed E-Selective Alkyne Semihydrogenation with Alcohols as Hydrogen Donors

Selective direct ruthenium-catalyzed semihydrogenation of diaryl alkynes to the corresponding E-alkenes has been achieved using alcohols as the hydrogen source. The method employs a simple ruthenium catalyst, does not require external ligands, and affords the desired products in > 99% NMR yield in most cases (up to 93% isolated yield). Best results were obtained using benzyl alcohol as the hydrogen donor, although biorenewable alcohols such as furfuryl alcohol could also be applied. In addition, tandem semihydrogenation–alkylation reactions were demonstrated, with potential applications in the synthesis of resveratrol derivatives.

The C-H activated controlled mono- and di-olefination of arenes in ionic liquids at room temperature

In this study, controlled mono and di-olefination of arenes was first realized at room temperature via the C-H bond activation in ionic liquids, probably due to the positive effects of ionic liquids. It is an energy-saving routes in industrial production without the need for heating equipment. Different catalysts were screened, and it was found that [Ru(p-cymene)Cl2]2 generated mono-olefinated products predominantly while [Cp*RhCl2]2 selectively gave di-olefinated products. These catalysts ([BMIM]NTf2 and [BMIM]PF6) as green and recyclable reaction media are highly efficient under mild conditions. This reaction process can avoid any volatile and environmentally toxic organic solvents, and is much safer without the need for pressure-tight equipment. A wide substrate scope with good yields and satisfactory selectivity was achieved. The reactions can be scaled up to gram-scale. Furthermore, an expensive rhodium/ruthenium catalytic system was recycled for at least 6 times with consistently high catalytic activity, which was economical and environmental friendly from an industrial point of view. According to the mechanistic study, the C-H bond cleavage was probably achieved via the concerted metalation-deprotonation. This technique can be applied in the synthesis of various valuable unsaturated aromatic compounds and shows a great potential for industrial production.

Bidentate Directing Groups: An Efficient Tool in C-H Bond Functionalization Chemistry for the Expedient Construction of C-C Bonds

During the past decades, synthetic organic chemistry discovered that directing group assisted C-H activation is a key tool for the expedient and siteselective construction of C-C bonds. Among the various directing group strategies, bidentate directing groups are now recognized as one of the most efficient devices for the selective functionalization of certain positions due to fact that its metal center permits fine, tunable, and reversible coordination. The family of bidentate directing groups permit various types of assistance to be achieved, such as N,N-dentate, N,O-dentate, and N,S-dentate auxiliaries, which are categorized based on the coordination site. In this review, we broadly discuss various C-H bond functionalization reactions for the formation of C-C bonds with the aid of bidentate directing groups.

Rhodium-Catalyzed C(sp2 )- or C(sp3 )-H Bond Functionalization Assisted by Removable Directing Groups

In recent years, transition-metal-catalyzed C-H activation has become a key strategy in the field of organic synthesis. Rhodium complexes are widely used as catalysts in a variety of C-H functionalization reactions because of their high reactivity and selectivity. The availability of a number of rhodium complexes in various oxidation states enables diverse reaction patterns to be obtained. Regioselectivity, an important issue in C-H activation chemistry, can be accomplished by using a directing group to assist the reaction. However, to obtain the target functionalized compounds, it is also necessary to use a directing group that can be easily removed. A wide range of directed C-H functionalization reactions catalyzed by rhodium complexes have been reported to date. In this Review, we discuss Rh-catalyzed C-H functionalization reactions that are aided by the use of a removable directing group such as phenol, amine, aldehyde, ketones, ester, acid, sulfonic acid, and N-heteroaromatic derivatives.

Rhodium-catalyzed direct C–H bond alkynylation of aryl sulfonamides with bromoalkynes

This protocol selectively provides a straightforward route to prepare ortho-(1-alkynyl) benzenesulfonamides or six-membered benzosultams by using different silyl protected bromoalkynes.

A comprehensive overview of directing groups applied in metal-catalysed C-H functionalisation chemistry

The present review is devoted to summarizing the recent advances (2015-2017) in the field of metal-catalysed group-directed C-H functionalisation. In order to clearly showcase the molecular diversity that can now be accessed by means of directed C-H functionalisation, the whole is organized following the directing groups installed on a substrate. Its aim is to be a comprehensive reference work, where a specific directing group can be easily found, together with the transformations which have been carried out with it. Hence, the primary format of this review is schemes accompanied with a concise explanatory text, in which the directing groups are ordered in sections according to their chemical structure. The schemes feature typical substrates used, the products obtained as well as the required reaction conditions. Importantly, each example is commented on with respect to the most important positive features and drawbacks, on aspects such as selectivity, substrate scope, reaction conditions, directing group removal, and greenness. The targeted readership are both experts in the field of C-H functionalisation chemistry (to provide a comprehensive overview of the progress made in the last years) and, even more so, all organic chemists who want to introduce the C-H functionalisation way of thinking for a design of straightforward, efficient and step-economic synthetic routes towards molecules of interest to them. Accordingly, this review should be of particular interest also for scientists from industrial R&D sector. Hence, the overall goal of this review is to promote the application of C-H functionalisation reactions outside the research groups dedicated to method development and establishing it as a valuable reaction archetype in contemporary R&D, comparable to the role cross-coupling reactions play to date.

Palladium-Catalyzed Regioselective Olefination of O-Acetyl Cyanohydrins

A practical palladium-catalyzed ortho-olefination of O-acetyl cyanohydrins assisted by synergetic directing groups has been developed. Thus, a range of olefinated O-acetyl cyanohydrins were synthesized in moderate to good yields. The reaction occurs efficiently with high regioselectivity and with a satisfactory tolerance of functional groups.