Synthesis of Purine Nucleosides Built on a 3-Oxabicyclo[3.2.0]heptane Scaffold

Visible Light-Induced Diastereoselective Construction of Trifluoromethylated Cyclobutane Scaffolds through [2+2]-Photocycloaddition and Water-Assisted Hydrodebromination

A visible light-induced diastereoselective synthesis of trifluoromethylated cyclobutane derivatives is described, consisting of [2+2]-photocycloaddition and water-assisted hydrodebromination by one pot. Quinolinones, isoquinolinones, and coumarins are able to participate in this one-pot process with 1-bromo-1-trifluoromethylethene. In addition, stereodefined trisubstituted trifluoromethylated cyclobutane alcohols, carboxylic acids, and amines can be obtained in a straightforward manner through the ring opening of lactone or lactam without the loss of original high diastereoselectivity given by the water-tristrimethylsilylsilane coordination. The antineoplastic bioactivities of those compounds are also well studied, which exhibit great antineoplastic potential comparable to cisplatin. In the proposed mechanism, thioxanthone (TX) serves as a dual catalyst and a radical chain pathway may be involved in the hydrodebromination process.

Metal vs. Metal-Free Catalysts for Oxidation of 5-Hydroxymethylfurfural and Levoglucosenone to Biosourced Chemicals

Lignocellulosic feedstocks, such as forestry biomass and agricultural crop residues, can be utilized to generate biofuels and biochemicals. Converting these organic waste materials into biochemicals is widely regarded as a remedial approach to develop a sustainable, clean, and green energy source. Nevertheless, are these methods sustainable and clean? Prior studies have shown that most such conversions use metals - including heavy metals or noble metals - as catalysts. In addition to the fact that many metals (e. g., aluminum, cobalt, titanium, platinum) have been listed as critical minerals, these methods suffer from high cost, deactivation, and leakage problems and the release of toxic wastes. This Review summarizes catalytic methods using metal and metal-free catalysts for the oxidation of the platform molecules 5-hydroxymethylfurfural and levoglucosenone and demonstrates the potential and effectiveness of metal-free catalysts.

Acetylene and Ethylene: Universal C2 Molecular Units in Cycloaddition Reactions

Acetylene and ethylene are the smallest molecules that contain an unsaturated carbon–carbon bond and can be efficiently utilized in a large variety of cycloaddition reactions. In this review, we summarize the application of these C2 molecular units in cycloaddition chemistry and highlight their amazing synthetic opportunities.

1 Introduction

2 Fundamental Features and Differences of Cycloaddition Reactions Involving Acetylene and Ethylene

3 (2+1) Cycloaddition

4 [2+2] Cycloaddition

5 (3+2) Cycloaddition

6 [4+2] Cycloaddition

7 (2+2+1) Cycloaddition

8 [2+2+2] Cycloaddition

9 The Use of Acetylene and Ethylene Cycloaddition for Deuterium and 13C Labeling

10 Conclusions

Visible light-induced one-pot synthesis of CF3/CF2-substituted cyclobutene derivatives

An efficient one-pot approach for the controllable synthesis of trifluoromethyl/gem-difluoromethylene substituted cyclobutene derivatives has been developed. The mechanism may involve visible light-induced [2+2]-cycloaddition of quinolinones with 1-bromo-1-trifluoromethylethene, followed by base-promoted dehydrobromination, [1,3]-H shift and further dehydrofluorination. A variety of CF3/CF2-substituted cyclobutenes that are currently difficult to obtain are afforded in good yields in this protocol, which may find its way into future fluorinated cyclobutene preparation.

Synthesis and cytotoxic evaluation of apioarabinofuranosyl pyrimidines

In view of the potent anticancer activity of the d-arabino-configured cytosine nucleoside (ara-C), apioarabinofuranosyl pyrimidine nucleosides were designed and synthesized from d-ribose as starting material. The synthetic strategy signifies that tosylation followed by in situ cyclization, one-pot controlled oxidative cleavage and acetylation by Pb(OAc)₄ , stereoselective nucleobase condensation, inversion of hydroxyl group and uracil group converted to cytosine as the key steps. Synthesized apioarabinofuranosyl pyrimidine nucleosides were tested using breast, colon, and ovarian cancer cell lines. However, only compound 19a, 19b, and 22b have a moderate growth-suppressive effect against the luminal A breast cancer cell line MCF7.

Intramolecular Photocycloaddition of 2(5 H)-Furanones to Temporarily Tethered Terminal Alkenes as a Stereoselective Source of Enantiomerically Pure Polyfunctionalyzed Cyclobutanes

Allyloxymethyloxymethyl and 4-pentenoyloxymethyl substituents have been used as tethering groups to study the intramolecular [2 + 2] photocycloaddition of chiral 5-substituted 2(5 H)-furanones. The photoreactions proceed in good yield and provide the expected regio- and diastereoselective tricyclic compounds with complementary regioselectivity, which depends on whether the vinyl chain is attached to the furanone by an acetal or an ester linkage. Computational simulations agree with experimental observations and indicate that the origin of the different observed regioselectivity in the intramolecular photochemical reaction of lactones 5 and 6 arises from the relative stability of the initial conformers. The synthetic potential of the enantiomerically pure photoadducts is illustrated by preparing an all- cis 1,2,3-trisubstituted cyclobutane bearing fully orthogonally protected hydroxyl groups.

Synthesis of (2S)-2-Chloro-2-fluororibolactone via Stereoselective Electrophilic Fluorination

A novel and efficient route for the preparation of (2S)-2-chloro-2-fluorolactone 29 is described. This approach takes advantage of a highly efficient diastereoselective electrophilic fluorination reaction (94% yield; >50:1 dr).

Recent Advances in the Synthesis of Cyclobutanes by Olefin [2 + 2] Photocycloaddition Reactions

The [2 + 2] photocycloaddition is undisputedly the most important and most frequently used photochemical reaction. In this review, it is attempted to cover all recent aspects of [2 + 2] photocycloaddition chemistry with an emphasis on synthetically relevant, regio-, and stereoselective reactions. The review aims to comprehensively discuss relevant work, which was done in the field in the last 20 years (i.e., from 1995 to 2015). Organization of the data follows a subdivision according to mechanism and substrate classes. Cu(I) and PET (photoinduced electron transfer) catalysis are treated separately in sections 2 and 4 , whereas the vast majority of photocycloaddition reactions which occur by direct excitation or sensitization are divided within section 3 into individual subsections according to the photochemically excited olefin.

Lipase-Catalyzed Baeyer-Villiger Oxidation of Cellulose-Derived Levoglucosenone into (S)-γ-Hydroxymethyl-α,β-Butenolide: Optimization by Response Surface Methodology

Cellulose-derived levoglucosenone (LGO) has been efficiently converted into pure (S)-γ-hydroxymethyl-α,β-butenolide (HBO), a chemical platform suited for the synthesis of drugs, flavors and antiviral agents. This process involves two-steps: a lipase-catalyzed Baeyer-Villiger oxidation of LGO followed by an acid hydrolysis of the reaction mixture to provide pure HBO. Response surface methodology (RSM), based on central composite face-centered (CCF) design, was employed to evaluate the factors effecting the enzyme-catalyzed reaction: pka of solid buffer (7.2–9.6), LGO concentration (0.5–1 M) and enzyme loading (55–285 PLU.mmol^-1). Enzyme loading and pka of solid buffer were found to be important factors to the reaction efficiency (as measured by the conversion of LGO) while only the later had significant effects on the enzyme recyclability (as measured by the enzyme residual activity). LGO concentration influences both responses by its interaction with the enzyme loading and pka of solid buffer. The optimal conditions which allow to convert at least 80% of LGO in 2 h at 40°C and reuse the enzyme for a subsequent cycle were found to be: solid buffer pka = 7.5, [LGO] = 0.50 M and 113 PLU.mmol^-1 for the lipase. A good agreement between experimental and predicted values was obtained and the model validity confirmed (p < 0.05). Alternative optimal conditions were explored using Monte Carlo simulations for risk analysis, being estimated the experimental region where the LGO conversion higher than 80% is fulfilled at a specific risk of failure.

A Study on the Photoreaction of 2(5H)-Furanones with Substituted Acetylenes: Evidence for a Mechanistic Reformulation

The photoreaction of 2(5H)-furanones with alkynes has been investigated. The complexity of this process is evidenced by the variety of isolated products, which have allowed disclosing interesting mechanistic aspects. When the reaction is performed in acetonitrile under direct excitation, in addition to the primary [2+2] cycloadducts, products derived from an 1,3-acyl shift rearrangement are also formed. For unsymmetrical alkynes, the rearrangement of the head-to-tail primary adducts produces new regioisomers and, when the starting furanone is chiral, this rearrangement inverts the relative anti/syn geometry of the primary cycloadducts. In the reactions performed in acetone under photosensitized conditions, rearranged products were never detected, supporting that the 1,3-acyl shift takes place from the singlet excited state S1 of the β,γ-unsaturated lactone. When bis(trimethylsilyl)acetylene is used as the alkyne partner, the major photoproducts are monocyclic bis(trimethylsilyl)lactones.