Cu–Mn Spinel Oxide Catalyzed Regioselective Halogenation of Phenols and N-Heteroarenes

DMSO/SOCl2-Enabled Synthesis of 3-Chloroindoles via Desulfonylative Chlorocyclization of N,N-Disubstituted 2-Alkynylanilines

The application of the DMSO/SOCl2 system enabled the intramolecular cyclization/chlorination of N,N-disubstituted 2-alkynylanilines, leading to the synthesis of a series of 3-chloroindoles with moderate to good yields. Differing from the previously reported interrupted Pummerer reaction featuring the introduction of SMe moiety, the current approach adopted an alternative pathway that realized the incorporation of chlorine atom to the indole skeleton via a desulfonylative chlorocyclization process.

Green Halogenation of Indoles with Oxone-Halide

Oxidative functionalization of indoles is one of the most widely used approaches to exploit the synthetic utility of indoles. In continuation of our research interest in the green oxidation of indoles, we further explore the oxidation of indoles with oxone-halide and discover that the protecting group on the nitrogen of indoles plays a decisive role in controlling the pathways of indole oxidation with oxone-halide. An electron-withdrawing group on the nitrogen of indoles (N-EWG) enables C2 halogenation with stoichiometric halide, while C3 halogenation could be selectively achieved by using stoichiometric halide without dependence on the electronic property of the protecting group on the indole nitrogen. Different from our previous results obtained by using catalytic halide, these findings lead to the development of an environmentally friendly, efficient, and mild protocol for access to 2- or 3-haloindoles (chloro and bromo). As compared to the previous synthetic methods for 2-/3-haloindoles, our method exploits the in situ-generated reactive halogenating species from oxone-halide for halogenation of indoles and thus eliminates the use of stoichiometric halogenating agents and the production of toxic and hazardous organic byproducts derived from oxidants.

TBAX/Oxone-Mediated Halogenation of Pyrazoles and Other Heterocycles: An Entry to Important Cross-Coupling Reactions

A facile, sustainable and eco-friendly protocol has been developed for the halogenation of various heterocycles using TBAX (TBAI/TBAB/TBACl) as halogenating agent, which afforded the products in 90-95% isolated yields. The reaction proceeds with low-cost TBAX and uses greener conditions like EtOH as a solvent and microwave as an alternative energy source for reaction. This protocol has been applied on pyrazoles and extended to different heterocycles like 7-azaindole, indazole, indole and 2-phenylimidazo[1,2-α]pyridines. The gram-scale iodination reaction has also been successfully performed by optimizing conventional heating conditions, which demonstrates its potential applicability in organic synthesis. Further these halogenated pyrazoles have been utilized for different coupling reactions including formation of arylated, alkynylated and sulfenated pyrazoles. However, TBAF mediated fluorination did not work.

Copper-catalyzed regioselective C2-H chlorination of indoles with para-toluenesulfonyl chloride

A copper-catalyzed, pyrimidine directed regioselective C-H chlorination of indoles with para-toluenesulfonyl chloride (TsCl) has been developed. The reactions proceeded smoothly in the presence of 20 mol% of Cu(OAc)₂ as the catalyst and TsCl as the chlorine source, delivering C2-chlorinated indoles with structural diversity in moderate to excellent yields. Mechanistic studies suggested that single electron transfer (SET) from Cu(II) to TsCl accompanied by the release of the p-toluenesulfonyl radical and the related Cu(III)Cl species might be involved in the reactions.

Visible-light-promoted iron catalyzed C‒H functionalization of 1,4-naphthoquinones via oxidative coupling with sulfoximines

A catalytic oxidative addition of sulfoximines to naphthoquinones via its C-H functionalization has been achieved using iron catalytic system, which exhibits good reactivity and high regioselectivity in presence of visible...

Ni–NiO heterojunctions: a versatile nanocatalyst for regioselective halogenation and oxidative esterification of aromatics

Herein, we report a facile method for the synthesis of Ni–NiO heterojunction nanoparticles, which we utilized for the nuclear halogenation reaction of phenol and substituted phenols using N-bromosuccinimide (NBS).

Regioselective Monobromination of Phenols with KBr and ZnAl-BrO3--Layered Double Hydroxides

The regioselective mono-bromination of phenols has been successfully developed with KBr and ZnAl-BrO3--layered double hydroxides (abbreviated as ZnAl-BrO3--LDHs) as brominating reagents. The para site is much favorable and the ortho site takes the priority if para site is occupied. This reaction featured with excellent regioselectivity, cheap brominating reagents, mild reaction condition, high atom economy, broad substrate scope, and provided an efficient method to synthesize bromophenols.

Directed Structural Transformations of Coordination Polymers Supported Single-Site Cu(II) Catalysts To Control the Site Selectivity of C-H Halogenation

A main difficulty in C-H bond functionalization is to undertake the catalyst control accurately where the reaction takes place. In this work, to achieve highly effective and regioselective single-site catalysts, a three-dimensional (3D) rhombus-like framework of {[Mn(Hidbt)DMF]·H₂O}_n (1) [H₃idbt = 5,5'-(1H-imidazole-4,5-diyl)-bis(2H-tetrazole)] containing coordinated DMF molecules was constructed. For the dissolution-recrystallization structural transformation process, attractive structural transformations proceeded from 1 to a new crystalline species formulated as {[Mn₃(idbt)₂(H₂O)₂]·3H₂O}_n (2) with a 3D windowlike architecture, and then the Mn ions in 2 could be exchanged with Cu ions through cation exchange in a single-crystal to single-crystal fashion to produce the Cu-exchanged product {[Mn₂Cu(idbt)₂(H₂O)₂]·3H₂O}_n (2a), which had a windowlike framework like that of 2. Furthermore, 2 and 2a were used as heterogeneous catalysts for the regioselective C-H halogenation of phenols with N-halosuccinimides (NCS and NBS) to produce the site selective single monohalogenated products. It was found that the catalytic activity and site selectivity of 2a were much higher than those of 2, because the unique structural features of 2a with the uniformly dispersed Cu^II active centers served as a single-site catalyst with a site-isolated and well-defined platform to promote the C-H halogenation reaction in regiocontrol and guide an orientation that favored the para selectivity during the reaction process.

Bimetallic Cu–Mn B spinel oxide catalyzed oxidative synthesis of 1,2-disubstituted benzimidazoles from benzyl bromides

Cu–Mn B (a heterogeneous catalyst) catalyzed synthesis of 1-benzyl-2-phenyl-1H-benzo[d]imidazoles is reported.

3d Transition Metals for C-H Activation

C-H activation has surfaced as an increasingly powerful tool for molecular sciences, with notable applications to material sciences, crop protection, drug discovery, and pharmaceutical industries, among others. Despite major advances, the vast majority of these C-H functionalizations required precious 4d or 5d transition metal catalysts. Given the cost-effective and sustainable nature of earth-abundant first row transition metals, the development of less toxic, inexpensive 3d metal catalysts for C-H activation has gained considerable recent momentum as a significantly more environmentally-benign and economically-attractive alternative. Herein, we provide a comprehensive overview on first row transition metal catalysts for C-H activation until summer 2018.

Transition-metal-free regioselective C–H halogenation of imidazo[1,2-a]pyridines: sodium chlorite/bromite as the halogen source

A facile transition-metal-free regioselective halogenation of imidazo[1,2-a]pyridines using sodium chlorite/bromite as the halogen source is presented. The reaction has provided an efficient method for the formation of C–Cl or C–Br bonds to synthesize 3-chloro or 3-bromo-imidazo[1,2-a]pyridines which were then efficiently transformed into imidazo[1,2-a]pyridine core π-systems by Suzuki–Miyaura reactions.

We report highly efficient strategies for the synthesis of 3-Cl or 3-Br-imidazo[1,2-a]pyridines using sodium chlorite/bromite as the halogenic source.

Regioselective C–H chlorination: towards the sequential difunctionalization of phenol derivatives and late-stage chlorination of bioactive compounds

Palladium-catalyzed C–H chlorination of phenol derivatives and late-stage chlorination of diflufenican and estrone.

C-H bond halogenation catalyzed or mediated by copper: an overview

Carbon-halogen (C-X) bonds are amongst the most fundamental groups in organic synthesis, they are frequently and widely employed in the synthesis of numerous organic products. The generation of a C-X bond, therefore, constitutes an issue of universal interest. Herein, the research advances on the copper-catalyzed and mediated C-X (X = F, Cl, Br, I) bond formation via direct C-H bond transformation is reviewed.