Mechanism of Rhodium-Catalyzed Carbon–Silicon Bond Cleavage for the Synthesis of Benzosilole Derivatives: A Computational Study

Sila-spirocyclization involving unstrained C(sp3)-Si bond cleavage

C - Si Bond cleavage is one of the key elemental steps for a wide variety of silicon-based transformations. However, the cleavage of unstrained Si-C(sp3) bonds catalyzed by transition metal are still in their infancy. They generally involve the insertion of a M - C(sp2) species into the C - Si bond and consequent intramolecular C(sp2)‒Si coupling to exclusively produce siloles. Here we report the Pd-catalyzed sila-spirocyclization, in which the Si-C(sp3) bond is activated by the insertion of a M - C(sp3) species and followed by the formation of a new C(sp3)‒Si bond, allowing the construction of diverse spirosilacycles. This reactivity mode, which is strongly supported by DFT calculations may open an avenue for the Si-C(sp3) bond cleavage and silacycle synthesis.

Benzosiloles with Crystallization-Induced Emission Enhancement of Electrochemiluminescence: Synthesis, Electrochemistry, and Crystallography

Crystallization-induced emission enhancement (CIEE) was demonstrated for the first time for electrochemilunimescence (ECL) with two new benzosiloles. Compared with their solution, the films of the two benzosiloles gave CIEE of 24 and 16 times. The mechanism of the CIEE-ECL was examined by spooling ECL spectroscopy, X-ray crystal structure analysis, photoluminescence, and DFT calculations. This CIEE-ECL system is a complement to the well-established aggregation-induced emission enhancement (AIEE) systems. Unique intermolecular interactions are noted in the crystalline chromophore. The first heterogeneous ECL system is established for organic compounds with highly hydrophobic properties.

Role of Alkaline-Earth Metal-Catalyst: A Theoretical Study of Pyridines Hydroboration

Density functional theory (DFT) calculations have been performed to investigate the mechanism of alkaline-earth-metal-catalyzed hydroboration of pyridines with borane. In this reaction, the active catalytic species is considered to be an alkaline earth metal hydride complex when the corresponding alkaline earth metal is used as the catalyst. The theoretical results reveal that initiation of the catalytic cycle is hydride transfer to generate a magnesium hydride complex when β-diimine alkylmagnesium is used as a pre-catalyst. The magnesium hydride complex can undergo coordination of the pyridine reactant followed by hydride transfer to form a dearomatized magnesium pyridine intermediate. Coordination of borane and hydride transfer from borohydride to magnesium then give the hydroboration product and regenerate the active magnesium hydride catalyst. The rate-determining step of the catalytic cycle is hydride transfer to pyridine with a free energy barrier of 29.7 kcal/mol. Other alkaline earth metal complexes, including calcium and strontium complexes, were also considered. The DFT calculations show that the corresponding activation free energies for the rate-determining step of this reaction with calcium and strontium catalysts are much lower than with the magnesium catalyst. Therefore, calcium and strontium complexes can be used as the catalyst for the reaction, which could allow mild reaction conditions.

Probing enantioselectivity in rhodium-catalyzed Si–C bond cleavage to construct silicon-stereocenters: a theoretical study

Density functional theory (DFT) calculations indicate that favorable oxidative addition/reductive elimination process from arylrhodium complex determines the enantioselectivity.

Toward a Predictive Understanding of Phosphine-Catalyzed [3 + 2] Annulation of Allenoates with Acrylate or Imine

Both theoretical and experimental studies were performed to explore the mechanism, regioselectivity, and enantioselectivity of phosphine-catalyzed [3 + 2] annulation between allenoates and acrylate or imine. Using density functional theory computations, we predicted that the enantioselective determining step is the nucleophilic addition of acrylate or imine to the catalyst-activated allenoate. In the key step, we proposed two hydrogen bonding interaction models (intermolecular H-bond model and intramolecular H-bond model). For acrylate substrates, the reaction proceeds via the intramolecular H-bond model and the strong noncovalent interactions between the 2-naphthyl ester moiety lead to the re-face attack pathway being more favorable. For imine substrates, the intermolecular H-bond model operates. In the annulation process, the bulky n-propyl oriented toward a crowded, sterically demanding environment plays a significant role in asymmetric induction. The theoretical calculation results agreed with experimental observations, and these results provide valuable insight into catalyst design and understanding of mechanisms of related reactions.

Long distance unconjugated agostic-assisted 1,5-H shift in a Ru-mediated Alder-ene type reaction: mechanism and stereoselectivity

A long distance unconjugated novel 1,5-H shift mechanism for a Ru-catalyzed Alder-ene type alkene–alkyne coupling reaction was examined by DFT.

C–H bond cleavage occurring on a Rh(v) intermediate: a theoretical study of Rh-catalyzed arene azidation

Our theoretical calculations indicated that the oxidation of Rh(iii) to Rh(v) by PhI(OAc)OTs is a facile process. Subsequent electrophilic deprotonation was shown to occur from a Rh(v) intermediate rather than a Rh(iii) intermediate.

Rhodium-catalyzed intramolecular carbosilylation of alkynes via C(sp3)–Si bond cleavage

A Rh(i)-catalyzed intramolecular cis-carbosilylation of alkynes was achieved to afford silatricyclic compounds in good yields.

Mechanism of Rhodium-Catalyzed C-H Functionalization: Advances in Theoretical Investigation

Transition-metal-catalyzed cross-coupling has emerged as an effective strategy for chemical synthesis. Within this area, direct C-H bond transformation is one of the most efficient and environmentally friendly processes for the construction of new C-C or C-heteroatom bonds. Over the past decades, rhodium-catalyzed C-H functionalization has attracted considerable attention because of the versatility and wide use of rhodium catalysts in chemistry. A series of C-X (X = C, N, or O) bond formation reactions could be realized from corresponding C-H bonds using rhodium catalysts. Various experimental studies on rhodium-catalyzed C-H functionalization reactions have been reported, and in tandem, mechanistic and computational studies have also progressed significantly. Since 2012, our group has performed theoretical studies to reveal the mechanism of rhodium-catalyzed C-H functionalization reactions. We have studied the changes in the oxidation state of rhodium and compared the Rh(I)/Rh(III) catalytic cycle to the Rh(III)/Rh(V) catalytic cycle using density functional theory calculation. The development of advanced computational methods and improvements in computing power make theoretical calculation a powerful tool for the mechanistic study of rhodium chemistry. Computational study is able to not only provide mechanistic insights but also explain the origin of regioselectivity, enantioselectivity, and stereoselectivity in rhodium-catalyzed C-H functionalization reactions. This Account summarizes our computational work on rhodium-catalyzed C-H functionalization reactions. The mechanistic study under discussion is divided into three main parts: C-H bond cleavage step, transformation of the C-Rh bond, and regeneration of the active catalyst. In the C-H bond cleavage step, computational results of four possible mechanisms, including concerted metalation-deprotonation (CMD), oxidative addition (OA), Friedel-Crafts-type electrophilic aromatic substitution (S_EAr), and σ-complex assisted metathesis (σ-CAM) are discussed. Subsequent transformation of the C-Rh bond, for example, via insertion of CO, olefin, alkyne, carbene, or nitrene, constructs new C-C or C-heteroatom bonds. For the regeneration of the active catalyst, reductive elimination of a high-valent rhodium complex and protonation of the C-Rh bond are emphasized as potential mechanism candidates. In addition to detailing the reaction pathway, the regioselectivity and diastereoselectivity of rhodium-catalyzed C-H functionalization reactions are also commented upon in this Account. The origin of the selectivity is clarified through theoretical analysis. Furthermore, we summarize and compare the changes in the oxidation state of rhodium along the complete reaction pathway. The work described in this Account demonstrates that rhodium catalysis might proceed via Rh(I)/Rh(III), Rh(II)/Rh(IV), Rh(III)/Rh(V), or non-redox-Rh(III) catalytic cycles.

From Mechanistic Study to Chiral Catalyst Optimization: Theoretical Insight into Binaphthophosphepine-catalyzed Asymmetric Intramolecular [3 + 2] Cycloaddition

Density functional M11 was used to study the mechanism and enantioselectivity of a binaphthophosphepine-catalyzed intramolecular [3 + 2] cycloaddition reaction. The computational results revealed that this reaction proceeds through nucleophilic addition of the phosphine catalyst to the allene, which yields a zwitterionic phosphonium intermediate. The subsequent stepwise [3 + 2] annulation process, which starts with the intramolecular nucleophilic addition of the allenoate moiety to the electron-deficient olefin group, determines the enantioselectivity of the reaction. This step is followed by a ring-closing reaction and water-assisted proton-transfer process to afford the final product with concomitant regeneration of the phosphine catalyst. Theoretical predictions of the enantioselectivity for various phosphine catalysts were consistent with experimental observations, and 2D contour maps played an important role in explaining the origin of the enantioselectivity. Moreover, on the basis of our theoretical study, new binaphthophosphepine catalysts were designed and that are expecting to afford higher enantioselectivity in this cycloaddition reaction.

Mechanism, chemoselectivity and enantioselectivity for the rhodium-catalyzed desymmetric synthesis of hydrobenzofurans: a theoretical study

A theoretical study of Rhodium-catalyzed desymmetrization of cyclohexadienones.

Transmetalation from B to Rh in the course of the catalytic asymmetric 1,4-addition reaction of phenylboronic acid to enones: a computational comparison of diphosphane and diene ligands

A DFT study on the transmetalation of PhB(OH)₂ to diphosphane and diene Rh catalysts confirms the proposed intermediate and reactivity trends.

DFT studies on the mechanism of palladium-catalyzed carbon–silicon cleavage for the synthesis of benzosilole derivatives

DFT calculations have been carried out to study the detailed mechanism of Pd-catalyzed intermolecular coupling reactions of 2-silylaryl bromides with alkynes via selective cleavage of C(sp³)–Si bonds.