Rhodium-Catalyzed Transannulation of 1,2,3-Triazoles to Polysubstituted Pyrroles

Synthesis of 2,3-Dihydropyrroles by Rhodium(II)-Catalyzed Transannulation of N-Sulfonyl-1,2,3-triazoles: Diversity Generation by One-Pot Methodologies

A versatile one-pot strategy for the generation of compounds of synthetic interest has been presented, promoting the development of practical processes. First, the transannulation of N-sulfonyltriazoles through alkenes and rhodium catalysis was described, giving 2,3-dihydropyrroles in 13-76% yield. As contributions of the strategy, the evaluation of alkenes with different properties, and the use of only drops of solvent (0.40 M) was highlighted. In addition, we described a methodology for the modulation of the N-sulfonyltriazoles, to obtain selectively cyclopropyl tosylimines or 2,3-dihydropyrroles. For the latter products, neat conditions were also included. Finally, the potential of the methodology was demonstrated by the synthesis of six structurally different analogues starting from the same substrates and late-stage transformation of bioactive molecules. These compounds were generated in 38-63% yield, after two or more conversion steps carried out in the same reaction vessel.

Modular Synthesis of Highly Substituted 3-Azapyrroles by Rh(II)-Catalyzed N-H Bond Insertion and Cyclodehydration

A modular synthesis of highly substituted 3-azapyrroles has been developed using a three-step sequence comprising copper-catalyzed alkyne-azide cycloaddition (CuAAC), N-H bond insertion, and cyclodehydration. 1-Sulfonyl-1,2,3-triazoles (1-STs) can be accessed from common alkyne and sulfonyl azide building blocks by CuAAC using CuTC. Rhodium(II)-acetate-promoted 1-ST denitrogenation results in highly electrophilic rhodium azavinyl carbenes that, here, underwent insertion into the N-H bond of secondary α-aminoketones to form 1,2-aminoalkenes. These products were cyclized and dehydrated using BF₃·OEt₂ into highly substituted 3-azapyrroles. The three steps (CuAAC, N-H bond insertion, and cyclodehydration) could be telescoped into a one-pot process. The method proved to be highly efficient and tolerated a wide range of substituents.

Azide-alkyne cycloadditions with an electronically activated alkyne: indole formation via 1-aryl-1,2,3-triazole-derived imino carbenes

We report that the use of a diaminoalkyne in the azide-alkyne cycloaddition with aryl azides leads to 3H-indoles under mild, uncatalysed conditions. Computations reveal that N₂ extrusion from, in one case, isolable triazoles is facile, generating imino carbenes, which undergo intramolecular aryl C-H bond activation and give 3H-indoles as products.

Tandem Synthesis of Tetrasubstituted NH Pyrroles from Simple Nitriles

An efficient tandem route to obtain tetrasubstituted NH pyrroles in a one-pot manner has been developed, staring from simple nitriles, ethyl bromoacetates, and zinc. This reaction involves oxidative dimerization of the zinc bromide complex of β-enaminoesters using cerium ammonium nitrate (CAN) as an oxidant, affording 2,3,4,5-tetrasubstituted pyrroles in yields up to 91%.

Catalytic Functionalization of Metallocarbenes Derived from α-Diazocarbonyl Compounds and Their Precursors

Short and efficient synthesis of heterocyclic compounds are highly desirable in synthetic organic chemistry. It is a dream approach to accomplish these syntheses from readily available starting materials in a single step. In this personal account, we discuss our contribution in the synthesis of heterocyclic compounds and beyond from N-sulfonyl-1,2,3-triazoles and α-diazocarbonyl compounds, which are the precursors for α-imino (carbonyl) metal carbenes in the presence of transition metal catalysts. Functionalization of α-imino(carbonyl) metal carbenes has been achieved through in-situ generated metal-stabilized ylides followed by either intramolecular trapping by non-polar bonds, rearrangement, cycloaddition, or 1,3-insertion fashion, which led to the efficient synthesis of various synthetically important intermediates and heterocyclic compounds.

Rhodium-Catalyzed Denitrogenative Transannulation of N-Sulfonyl-1,2,3-triazoles with Glycals Giving Pyrroline-Fused N-Glycosides

Described here is a selective synthesis of 2,3-dihydropyrrole-fused N-glycosides through rhodium-catalyzed denitrogenative transannulation of N-sulfonyl-1,2,3-triazoles with glycals. A series of pyrroline-fused N-glycosides are afforded in moderate to excellent yields with exclusive regioselectivity and stereoselectivity. Functional application of such a resultant product by oxidative addition and epoxidation is also explored. Notably, the treatment of a pyrroline-fused N-glycoside (3a) with TMSOTf efficiently leads to an interesting unexpected C-nucleoside (9) via a TMSOTf-inducing ring opening/acetyl migration/ring closing reaction sequence.

Synthesis of N-perfluoroalkyl-3,4-disubstituted pyrroles by rhodium-catalyzed transannulation of N-fluoroalkyl-1,2,3-triazoles with terminal alkynes

The rhodium-catalyzed transannulation of N-perfluoroalkyl-1,2,3-triazoles with aromatic and aliphatic terminal alkynes under microwave heating conditions afforded N-perfluoroalkyl-3,4-disubstituted pyrroles (major products) and N-fluoroalkyl-2,4-disubstituted pyrroles (minor products). The observed selectivities in the case of the reactions with aliphatic alkynes were high.

Recent Advancements in Pyrrole Synthesis

This review article features selected examples on the synthesis of functionalized pyrroles that were reported between 2014 and 2019. Pyrrole is an important nitrogen-containing aromatic heterocycle that can be found in numerous compounds of biological and material significance. Given its vast importance, pyrrole continues to be an attractive target for the development of new synthetic reactions. The contents of this article are organized by the starting materials, which can be broadly classified into four different types: substrates bearing π-systems, substrates bearing carbonyl and other polar groups, and substrates bearing heterocyclic motifs. Brief discussions on plausible reaction mechanisms for most transformations are also presented.

Direct C2-arylation of N-acyl pyrroles with aryl halides under palladium catalysis

C2-arylation of N-acyl pyrroles with aryl halides is developed for the first time using Pd(PPh3)4 as a catalyst in combination with Ag2CO3 under air, which allowed the application of a good compatibility catalytic system. This protocol provides a straightforward method for the preparation of valuable arylated pyrroles in moderate to good yields under the standard conditions with good substrate tolerance. Interestingly, while N-benzoyl pyrroles reacted well, the use of substrates with a thiophene or furan ring indicated that the thiophene and furan rings are more reactive than pyrrole for the present catalytic system.

Formal Allylation and Enantioselective Cyclopropanation of Donor/Acceptor Rhodium(II) Azavinyl Carbenes

A highly efficient formal allylation of dihydronaphthotriazoles with alkenes under rhodium(II) catalysis is reported. Various allyl dihydronaphthalene derivatives were furnished via rhodium(II) azavinyl carbenes with moderate to good yields and excellent chemoselectivity. When monosubstituted alkenes are used, cyclopropanation occurs and good to excellent enantioselectivities have been achieved. Particularly noteworthy is the allylic C(sp²)-H activation instead of traditional C(sp³)-H activation in the formal allylation process.

Recent Progress in the Synthesis of Pyrroles

:

Pyrrole derivatives are nitrogen-containing heterocyclic compounds and widely distributed in a large number of natural and non-natural compounds. These compounds possess a broad spectrum of biological activities such as anti-infammatory, antiviral, antitumor, antifungal, and antibacterial activities. Besides their biological activity, pyrrole derivatives have also been applied in various areas such as dyes, conducting polymers, organic semiconductors.

:

Due to such a wide range of applicability, access to this class of compounds has attracted intensive research interest. Various established synthetic methods such as Paal-Knorr, Huisgen, and Hantzsch have been modified and improved. In addition, numerous novel methods for pyrrole synthesis have been discovered. This review will focus on considerable studies on the synthesis of pyrroles, which date back from 2014.

Direct oxidative coupling of N-acyl pyrroles with alkenes by ruthenium(ii)-catalyzed regioselective C2-alkenylation

Ruthenium(ii)-catalyzed oxidative coupling by C2-alkenylation of N-acyl pyrroles with alkenes has been described. The acyl unit was found to be an effective chelating group for the activation of aryl C-H bonds ortho to the directing group. The alkenylation reaction of benzoyl pyrroles occurred regioselectively at the C2-position of the pyrrole ring, without touching the benzene ring. The reaction provides exclusively monosubstituted pyrroles under the optimized conditions. Disubstituted pyrroles could be obtained using higher loadings of the ruthenium(ii)-catalyst and the additives.

Rhodium-catalyzed Sommelet–Hauser type rearrangement of α-diazoimines: synthesis of functionalized enamides

An efficient rhodium catalyzed Sommelet–Hauser type rearrangement of sulfur ylides derived from α-thioesters and N-sulfonyl-1,2,3-triazoles has been successfully accomplished for the synthesis of various functionalized enamides.

Cascade Rh(ii) and Yb(iii) catalyzed synthesis of substituted naphthofurans via transannulation of N-sulfonyl-1,2,3-triazoles with β-naphthols

Synthesis of substituted naphthofurans has been achieved via an efficient cascade Rh(ii)/Yb(iii) catalyzed transannulation of N-sulfonyl-1,2,3-triazoles with β-naphthols.

Rhodium(ii)-catalyzed divergent intramolecular tandem cyclization of N- or O-tethered cyclohexa-2,5-dienones with 1-sulfonyl-1,2,3-triazole: synthesis of cyclopropa[cd]indole and benzofuran derivatives

A novel rhodium(ii)-catalyzed divergent intramolecular tandem cyclization of N- or O-tethered cyclohexa-2,5-dienones and 1-sulfonyl-1,2,3-triazole is disclosed, affording cyclopropa[cd]indole and benzofuran derivatives in moderate to good yields.

The Expanding Utility of Rhodium-Iminocarbenes: Recent Advances in the Synthesis of Natural Products and Related Scaffolds

Rhodium-iminocarbenes that are derived from N-sulfonyl-1,2,3-triazoles have become an important class of reactive species and useful intermediates in organic synthesis. Over the last several years, many practical and versatile approaches involving rhodium-iminocarbene intermediates to synthetically challenging molecules (scaffolds) have been developed. This Minireview mainly summarizes the recent advance of rhodium-iminocarbene involved reactions in the synthesis of natural products and their related scaffolds by the end of 2017. Several applications in important pharmaceuticals are documented as well.

A rhodium-catalyzed transannulation of N-(per)fluoroalkyl-1,2,3-triazoles under microwave conditions – a general route to N-(per)fluoroalkyl-substituted five-membered heterocycles

An efficient rhodium-catalyzed microwave-assisted transannulation of N-(per)fluoroalkyl-1,2,3-triazoles to previously inaccessible N-(per)fluoroalkyl five-membered heterocycles was developed.

Rh(II) Catalyzed High Order Cycloadditions of 8-Azaheptafulvenes with N-Sulfonyl 1,2,3-Triazloes or α-Oxo Diazocompounds

A novel strategy was developed for the application of Rh carbenes generated from readily accessible N-sulfonyl 1,2,3,-triazoles or diazocompouds in the high order cycloadditions, which offered an efficient route to a variety of N-containing medium-sized rings. The process provided a wide range of cyclohepta[b]pyrazine and cyclohepta[b]pyrrolone derivatives with high yields.

Rhodium-catalyzed synthesis of 1,2-dihydropyridine by a tandem reaction of 4-(1-acetoxyallyl)-1-sulfonyl-1,2,3-triazole

A tandem reaction of 4-(1-acetoxyallyl)-1-sulfonyl-1,2,3-triazole involving α-imino rhodium carbene was reported and 1,6-dihydropyridin-3-yl acetate was obtained.

Rhodium(ii)-catalyzed intermolecular [3 + 2] annulation of N-vinyl indoles with N-tosyl-1,2,3-triazoles via an aza-vinyl Rh carbene

This study opens up a new synthetic approach for the construction of various functionalized indoles having a dihydropyrrole moiety from the Rh(ii)-catalyzed annulation of N-vinyl indoles with 4-aryl-N-tosyl-1,2,3-triazoles under mild conditions.

Mechanistic studies for dirhodium-catalyzed ring expansion reactions

Theoretical studies reveal the role of a dirhodium catalyst in the expansion reactions of azide tethered methylenecyclopropanes and account for the origin of product selectivity.

Synthesis of Penta-2,4-dien-1-imines and 1,2-Dihydropyridines by Rhodium-Catalyzed Reaction of N-Sulfonyl-1,2,3-triazoles with 2-(Siloxy)furans

A rhodium(II)-catalyzed reaction of N-sulfonyl-1,2,3-triazoles with 2-(siloxy)furans is reported. Either open-chain penta-2,4-dien-1-imines or cyclic 1,2-dihydropyridines are selectively obtained depending on the ligand on rhodium(II).

Synthesis of Multifunctionalized 2-Carbonylpyrrole by Rhodium-Catalyzed Transannulation of 1-Sulfonyl-1,2,3-triazole with β-Diketone

A facile rhodium-catalyzed transannulation of 1-sulfonyl-1,2,3-triazoles with β-diketones was realized, and a series of multisubstituted 2-carbonylpyrroles were synthesized efficiently (up to 94% yield). The protocol features several advantages, such as readily available materials, mild reaction conditions, a concise operating procedure, a broad reaction scope, and excellent regioselectivity when benzoylacetone derivatives were used.

Rhodium/Silver-Cocatalyzed Transannulation of N-Sulfonyl-1,2,3-triazoles with Vinyl Azides: Divergent Synthesis of Pyrroles and 2 H-Pyrazines

The first cyclization reaction between vinyl azides and N-sulfonyl-1,2,3-triazoles is reported. A Rh/Ag binary metal catalyst system proved to be necessary for the successful cyclization. By varying the structure of vinyl azides, such reaction allows the divergent synthesis of pyrroles and 2H-pyrazines. The cyclization reactions feature a broad substrate scope, good functional group tolerance, high reaction efficiency, and good to high product yields.

Rhodium catalyzed diastereoselective synthesis of 2,2,3,3-tetrasubstituted indolines from N-sulfonyl-1,2,3-triazoles and ortho-vinylanilines

An efficient diastereoselective rhodium catalyzed synthesis of indolines possessing two contiguous tetrasubstituted carbon centers has been achieved with good to excellent yields using ortho-vinylanilines and iminocarbenes derived from N-sulfonyl-1,2,3-triazoles.

An efficient diastereoselective rhodium catalyzed synthesis of indolines possessing two contiguous tetrasubstituted carbon centers has been achieved with good to excellent yields using ortho-vinylanilines and iminocarbenes derived from N-sulfonyl-1,2,3-triazoles. The reaction affords excellent cis-diastereoselectivity through the initial formation of a N-ylide followed by intramolecular trapping with unactivated alkenes via an ene-type reaction with a well-organized transition state, namely intramolecular carbenylative amination of alkenes. The developed transformation was further extended to the successful synthesis of tricyclic compounds, imidazoindolines, through reduction and hypervalent iodine mediated oxidative cyclization.

Tandem 1,2-sulfur migration and (aza)-Diels-Alder reaction of β-thio-α-diazoimines: rhodium catalyzed synthesis of (fused)-polyhydropyridines, and cyclohexenes

Rhodium catalyzed synthesis of substituted tetrahydropyridines was accomplished from readily accessible thio-tethered N-sulfonyl-1,2,3-triazoles. The reaction involves tandem rhodium catalyzed 1,2-sulfur migration in β-thio-α-diazoimines, generated from thio-tethered N-sulfonyl-1,2,3-triazoles, to thio-substituted 1-azadiene and subsequent self aza-Diels-Alder reaction. Interestingly, the methodology was effectively extended to the synthesis of fused tetrahydropyridines, dihydropyridines and cyclohexenes through the in situ trapping of the intermediate, 1-azadiene, with various dienophiles such as enol ether, enamine, ketene S,S-acetal, alkyne, alkene and diene. Furthermore, the direct conversion of propargyl sulfides to (fused)-tetrahydropyridines was also achieved through the successful integration of copper and rhodium catalysts in one-pot.