Palladium-catalyzed reactions of arylindium reagents prepared directly from aryl iodides and indium metal

One-Step Transformation of Aryl Diazonium Salts into Aryl Indium(III) Reagents

A method for the conversion of diazonium salts into intrinsically nucleophilic aryl indium reagents is described. The reaction is performed using indium(I) bromide with the C-In bond being formed by the interaction of aryl radicals with the indium salt. The obtained aryl indium(III) reagents work well in the Liebeskind-Srogl cross-coupling with thioesters, affording a wide variety of aryl ketones. This two-step transformation is a general method for the acylation of diazonium salts.

Metal Activation Produces Different Reaction Environments for Intermediates during Oxidative Addition

Commercial zinc metal powder requires activation for consistent and reliable use as a reductant in the formation of organozinc reagents from organohalides, and for the avoidance of supplier and batch-to-batch variability. However, the impact of activation methods on the reaction environments of subsequent intermediates has been unknown. Herein, a fluorescence lifetime imaging microscopy (FLIM) method is developed to bridge this knowledge gap, by imaging and examining reaction intermediates on zinc metal that has been activated by pretreatment through different common methods (i. e., by chemical activation with TMSCl, dibromoethane, or HCl; or by mechanical activation). The group of chemical activating agents, previously thought to act similarly by removing oxide layers, are here shown to produce markedly different reaction environments experienced by subsequent oxidative-addition intermediates from organohalides - data uniquely available through FLIM's ability to detect small quantities of intermediates in situ coupled with its microenvironmental sensitivity. These different microenvironments potentially give rise to different rates of formation, subsequent solubilization, and reactivity, despite the shared "[RZnX]" molecular structure of these intermediates. This information revises models for methods development for oxidative addition to currently sluggish metals beyond zinc by establishing diverse outcomes for pretreatment activation methods that were previously considered similar.

Trimethylsilyl Chloride Aids in Solubilization of Oxidative Addition Intermediates from Zinc Metal

Trimethylsilyl chloride (TMSCl) is commonly used to "activate" metal(0) powders toward oxidative addition of organohalides, but knowledge of its mechanism remains limited by the inability to characterize chemical intermediates under reaction conditions. Here, fluorescence lifetime imaging microscopy (FLIM) overcomes these prior limitations and shows that TMSCl aids in solubilization of the organozinc intermediate from zinc(0) metal after oxidative addition, a previously unknown mechanistic role. This mechanistic role is in contrast to previously known roles for TMSCl before the oxidative addition step. To achieve this understanding, FLIM, a tool traditionally used in biology, is developed to characterize intermediates during a chemical reaction-thus revealing mechanistic steps that are unobservable without fluorescence lifetime data. These findings impact organometallic reagent synthesis and catalysis by providing a previously uncharacterized mechanistic role for a widely used activating agent, an understanding of which is suitable for revising activation models and for developing strategies to activate currently unreactive metals.

Reactivity Differences of Rieke Zinc Arise Primarily from Salts in the Supernatant, Not in the Solids

Contrary to prevailing thought, the salt content of supernatants is found to dictate reactivity differences of different preparation methods of Rieke zinc toward oxidative addition of organohalides. This conclusion is established through combined single-particle microscopy and ensemble spectroscopy experiments, coupled with careful removal or keeping of the supernatants during Rieke zinc preparations. Fluorescence microscopy experiments with single-Rieke-zinc-particle resolution determined the microscale surface reactivity of the Rieke zinc in the absence of supernatants, thus pinpointing its inherent reactivity independent of the convoluting supernatant composition. In parallel experiments, scanning electron microscopy, energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, and inductively coupled plasma-mass spectrometry characterized the zinc metal chemical composition at the bulk and single-particle levels. Proton nuclear magnetic resonance spectroscopy kinetics characterized bench-scale Rieke zinc reactivity in the presence and absence of different supernatants and exogenous salt additives. Together, these experiments show that the differences in reactivity from sodium-reduced vs lithium-reduced Rieke zinc arise from the residual salts in the supernatant rather than the differing salt compositions of the solids. This supernatant salt also determines the structure of the ultimate organozinc product, generating either the diorganozinc or monoorganozinc halide complex. That different organozinc complexes formed upon direct insertion to different preparations of Rieke zinc was not previously reported, despite Rieke zinc's widespread use. These findings impact organozinc-reagent and nanomaterial synthesis by showing that, unexpectedly, desired Rieke zinc reactivity can be achieved through simple addition of soluble salts to solutions that were used to prepare the metals─a substantially easier synthetic manipulation than solid composition and morphology control.

Biaryl Coupling of Aryldiazonium Salts and Arylboronic Acids Catalysed by Gold

A gold-catalysed coupling of aryldiazonium salts with arylboronic acids is described. The reactions proceed in satisfactory yields under irradiation with blue LEDs in the presence of KF and a catalytic amount of ascorbic acid. Notably, 4-nitrobenzendiazonium tetrafluoro­borate is sufficiently reactive to undergo the coupling with a variety of arylboronic acids in the absence of aryl radical initiators. The coupling is applicable for electron-donating and electron-withdrawing groups present at the para, ortho, and meta positions of both substrates.

Origins of Batch-to-Batch Variation: Organoindium Reagents from Indium Metal

Yields of organoindium reagents synthesized from indium metal were previously reported to be highly dependent on metal batch and supplier due to the presence or absence of anticaking agent. Here, single-particle fluorescence microscopy established that MgO, an additive in some batches nominally for anticaking, significantly increased the physisorption of small-molecule organics onto the surface of the resulting MgO-coated indium metal particles. An inert and relatively nonpolar boron dipyrromethene fluorophore with a hydrocarbon tail provided a sensitive probe for this surface physisorption. SEM images revealed markedly different surface properties of indium particles either with or without MgO, consistent with their different physisorption properties observed by fluorescence microscopy. We further documented incomplete commercial bottle labeling regarding the presence and composition of this anticaking agent, both within our laboratory and previously in the literature, which may complicate reproducibility between laboratories. Trimethylsilyl chloride pretreatment, a step employed in a subset of reported synthetic procedures, removed the anticaking agent and produced particles with similar physisorption properties as commercial batches of indium powder distributed without the anticaking agent. These data indicate the possibility of an additional substrate/catalyst physisorption mechanism by which the anticaking agent may be influencing synthetic procedures that generate organoindium reagents from indium metal, in addition to simple anticaking.

Palladium-catalyzed cross-coupling of (hetero)aryl or alkenyl sulfonates with aryl titanium as the multi-functional reagent

The first palladium-catalyzed cross-coupling reaction of aryl/heteroaryl and alkenyl mesylates and tosylates with aryl titanium as the multi-functional reagent is reported.

Microscopy Reveals: Impact of Lithium Salts on Elementary Steps Predicts Organozinc Reagent Synthesis and Structure

Lithium chloride is known to promote the direct insertion of metallic zinc powder into organohalides in the practical synthesis of organozinc reagents, but the reason for its special ability is poorly understood. Pioneering a combined approach of single-metal-particle fluorescence microscopy with ¹H NMR spectroscopy, we herein show that the effectiveness of different lithium salts toward solubilizing intermediates on the surface of zinc metal establishes a previously unknown reactivity correlation that predicts the propensity of that salt to promote macroscale reagent synthesis and also predicts the solution structure of the ultimate organozinc reagent. A salt-free pathway is also identified. These observations of an organometallic surface intermediate, its elementary-step reactivity, and the impact of various synthetic conditions (salt, salt-free, temperature, stirring, and time) on its persistence, are uniquely available from the sensitivity and spatial localization ability of the microscopy technique. These studies unify previously disparate observations under a single unified mechanistic framework. This framework enables the rational prediction of salt effects on multiple steps in organozinc reagent synthesis and reactivity. This is an early example of single-particle microscopy characterization of elementary steps providing predictive power in reaction development by gaining a sensitive and selective spectral handle on an important intermediate, highlighting the role of this next generation of analytical tools in the development of synthetic chemistry.

Metallic salt-catalyzed direct indium insertion into alkyl iodides and their applications in cross-coupling reactions

An efficient method for the synthesis of alkyl indium reagents via an indium(iii) or lead(ii) halide-catalyzed direct insertion of indium into alkyl iodides is developed. NMR and ESI-MS analyses indicated the formation of a mixture of an alkyl indium dihalide (RInX₂) and a dialkyl indium halide (R₂InX).

Sequential In-catalyzed intramolecular hydroarylation and Pd-catalyzed cross-coupling reactions using bromopropargyl aryl ethers and amines

A sequential one-pot In-catalyzed intramolecular hydroarylation and Pd-catalyzed cross-coupling reaction using bromopropargyl aryl ethers and amines has been developed.

Transition metal-catalyzed cross-coupling reactions using organoindium reagents

This review highlights the versatility and significance of transition metal-catalyzed cross-coupling reactions employing mild and unique organoindium reagents with exceptional functional group compatibility and sometimes remarkable chemo- and stereoselectivities.

Magnesium salt promoted tandem nucleophilic addition-Oppenauer oxidation of aldehydes with organozinc reagents

A magnesium salt promoted synthesis of ketones via tandem nucleophilic addition-Oppenauer oxidation of aldehydes using organozinc chemistry was demonstrated. Magnesium salts concomitantly generated via magnesium metal mediated organohalide zincation exhibit high efficacy for nucleophilic addition of organozinc reagents to aromatic aldehydes and thereafter Oppenauer oxidation whereby ketones are formed in high to excellent yields.

Palladium-catalyzed Hiyama cross-coupling of aryltrifluorosilanes with aryl and heteroaryl chlorides

An efficient, palladium-catalyzed Hiyama cross-coupling reaction of aryltrifluorosilanes with aryl chlorides has been developed. A wide variety of functionalized biaryl derivatives were isolated in good to excellent yields. The scope of this reaction has also been extended to heteroaryl chlorides, affording the corresponding heterobiaryl compounds in high yields.

Palladium-catalyzed cross-coupling of indium homoenolate with aryl halide with wide functional group compatibility

An efficient palladium-catalyzed cross-coupling of indium homoenolate with aryl halide is described. The reactions proceeded efficiently in DMA at 100 °C to afford the desired products of β-aryl ketones in moderate to good yields. Various important functional groups including COR, COOR, CHO, CN, OH, and NO(2) can be well tolerated in the protocol.

LiCl-mediated preparation of functionalized benzylic indium(III) halides and highly chemoselective palladium-catalyzed cross-coupling in a protic cosolvent

Sensitive functional groups such as COR, CHO, or CH(2)OH can be present in benzylic indium reagents prepared by the direct insertion of indium in the presence of LiCl. These reagents undergo palladium-catalyzed cross-coupling reactions in the presence of a protic cosolvent after activation with iPrMgCl x LiCl (see scheme). Remarkable chemoselectivities are achieved by using various electrophiles containing NH or OH groups.