Regioselective Bromination Tactics in the de Novo Synthesis of Chlorophyll b Analogues

Near Infrared Emitting Semiconductor Polymer Dots for Bioimaging and Sensing

Semiconducting polymer dots (Pdots) are rapidly becoming one of the most studied nanoparticles in fluorescence bioimaging and sensing. Their small size, high brightness, and resistance to photobleaching make them one of the most attractive fluorophores for fluorescence imaging and sensing applications. This paper highlights our recent advances in fluorescence bioimaging and sensing with nanoscale luminescent Pdots, specifically the use of organic dyes as dopant molecules to modify the optical properties of Pdots to enable deep red and near infrared fluorescence bioimaging applications and to impart sensitivity of dye doped Pdots towards selected analytes. Building on our earlier work, we report the formation of secondary antibody-conjugated Pdots and provide Cryo-TEM evidence for their formation. We demonstrate the selective targeting of the antibody-conjugated Pdots to FLAG-tagged FLS2 membrane receptors in genetically engineered plant leaf cells. We also report the formation of a new class of luminescent Pdots with emission wavelengths of around 1000 nm. Finally, we demonstrate the formation and utility of oxygen sensing Pdots in aqueous media.

Hydroporphyrin-Doped Near-Infrared-Emitting Polymer Dots for Cellular Fluorescence Imaging

Near-infrared (NIR) fluorescent semiconductor polymer dots (Pdots) have shown great potential for fluorescence imaging due to their exceptional chemical and photophysical properties. This paper describes the synthesis of NIR-emitting Pdots with great control and tunability of emission peak wavelength. The Pdots were prepared by doping poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-co-(1,4-benzo-(2,1',3)-thiadiazole)] (PFBT), a semiconducting polymer commonly used as a host polymer in luminescent Pdots, with a series of chlorins and bacteriochlorins with varying functional groups. Chlorins and bacteriochlorins are ideal dopants due to their high hydrophobicity, which precludes their use as molecular probes in aqueous biological media but on the other hand prevents their leakage when doped into Pdots. Additionally, chlorins and bacteriochlorins have narrow deep red to NIR-emission bands and the wide array of synthetic modifications available for modifying their molecular structure enables tuning their emission predictably and systematically. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements show the chlorin- and bacteriochlorin-doped Pdots to be nearly spherical with an average diameter of 46 ± 12 nm. Efficient energy transfer between PFBT and the doped chlorins or bacteriochlorins decreases the PFBT donor emission to near baseline level and increases the emission of the doped dyes that serve as acceptors. The chlorin- and bacteriochlorin-doped Pdots show narrow emission bands ranging from 640 to 820 nm depending on the doped dye. The paper demonstrates the utility of the systematic chlorin and bacteriochlorin synthesis approach by preparing Pdots of varying emission peak wavelength, utilizing them to visualize multiple targets using wide-field fluorescence microscopy, binding them to secondary antibodies, and determining the binding of secondary antibody-conjugated Pdots to primary antibody-labeled receptors in plant cells. Additionally, the chlorin- and bacteriochlorin-doped Pdots show a blinking behavior that could enable their use in super-resolution imaging methods like STORM.

Synthesis of Hangman Chlorins

Two complementary rational synthetic routes have been developed in order to synthesize hangman chlorins, which differ with regard to the order of the installation (pre- and post-formation of the chlorin macrocycle) and position of the xanthene backbone about the chlorin periphery. The versatility of the synthetic method is demonstrated with the preparation of ten new hangman chlorins bearing a xanthene backbone and a pendant carboxylic acid. Cyclic voltammograms of hangman chlorins exhibit a hangman effect derived from intermolecular proton transfer. This hangman effect is manifested in catalytic hydrogen evolution production.

Bioconjugatable synthetic chlorins rendered water-soluble with three PEG-12 groups via click chemistry

Chlorins provide many ideal features for use as red-region fluorophores but require molecular tailoring for solubilization in aqueous solution. A chlorin building-block bearing 18,18-dimethyl, 15-bromo and 10-[2,4,6-tris(propargyloxy)phenyl] substituents has been transformed via click chemistry with CH3(OCH2CH[Formula: see text]-N3 followed by Suzuki coupling with 3-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)propanoic acid, thereby installing a water-solubilization motif and a bioconjugatable handle, respectively. In toluene, [Formula: see text]-dimethylformamide (DMF) or water, the resulting facially encumbered free base chlorin exhibits characteristic chlorin absorption ([Formula: see text] [Formula: see text]412, 643 nm) and fluorescence ([Formula: see text] [Formula: see text]645 nm) spectra with only modest variation in fluorescence quantum yield ([Formula: see text] values (0.24, 0.25 and 0.19, respectively). The zinc chlorin derived therefrom exhibits similar spectral constancy ([Formula: see text] [Formula: see text]414 and 613 nm, [Formula: see text] [Formula: see text]616 nm) and [Formula: see text] 0.094, 0.10 and 0.086 in the three solvents. The results together indicate the viability of the molecular design and synthetic methodology to create red-region fluorophores for use in diverse applications.

Investigation of the demetallation of 10-aryl substituted synthetic chlorins under acidic conditions

The acidic demetallation of a series of sparsely substituted Zn(II) chlorins is reported. The chlorins were functionalized in the 10-position with substituents ranging from strongly electron donating mesityl and p-methoxyphenyl to electron-withdrawing p-nitrophenyl and pentafluorophenyl groups. The demetallation kinetics were investigated using UV-Visible absorption spectroscopy. Demetallation was carried out by exposing the metallochlorins dissolved in CH₂Cl₂ to an excess of trifluoroacetic acid. Reasonable correlation was found between the Hammett constant of the 10-substituent and the rate constant of the loss of the metal ion. The largest differences were observed between the p-methoxyphenyl and p-nitrophenyl-substituted Zn(II) chlorins, undergoing loss of Zn(II) with pseudo first order rate constants of 0.0789 × 10^-3 and 3.70 × 10^-3 min^-1, respectively. Taken together, these data establish the dramatic influence even subtle changes can have in altering the electronic properties of chlorins, which in turn impacts metallochlorin function.

Chlorophyll-Inspired Red-Region Fluorophores: Building Block Synthesis and Studies in Aqueous Media

Fluorophores that absorb and emit in the red spectral region (600-700 nm) are of great interest in photochemistry and photomedicine. Eight new target chlorins (and 19 new chlorins altogether)-analogues of chlorophyll-of different polarities have been designed and synthesized for various applications; seven of the chlorins are equipped with a bioconjugatable tether. Hydrophobic or amphiphilic chlorins in a non-polar organic solvent (toluene), polar organic solvent (DMF), and aqueous or aqueous micellar media show a sharp emission band in the red region and modest fluorescence quantum yield (Φ_f = 0.2-0.3). A Poisson analysis implies most micelles are empty and few contain >1 chlorin. Water-soluble chlorins each bearing three PEG (oligoethyleneglycol) groups exhibit narrow emission bands (full-width-at-half maximum <25 nm). The lifetime of the lowest singlet excited state and the corresponding yields and rate constants for depopulation pathways (fluorescence, intersystem crossing, internal conversion) are generally little affected by the PEG groups or dissolution in aqueous or organic media. A set of chlorin-avidin conjugates revealed a 2-fold increase in Φ_f with increased average chlorin/avidin ratio (2.3-12). In summary, the chlorins of various polarities described herein are well suited as red-emitting fluorophores for applications in aqueous or organic media.

Regioselective and Switchable meso-Aminations and Couplings of 5,15-Diarylchlorins

Controllable chemo- and regiodivergent amination reactions of anilines and chlorins are accomplished by employing different oxidants and substrates, constructing aminated chlorin monomers and dimers with high structural diversity. Importantly, besides preferential 20-meso-position, the oxidative amination was also realized at the inactive 10-meso-position by using phenyliodine bis(trifluoroacetate) (PIFA) and gold(III)-based reagents.

Furan- and Thiophene-Based Auxochromes Red-shift Chlorin Absorptions and Enable Oxidative Chlorin Polymerizations

The de novo syntheses of chemically stable chlorins with five-membered heterocyclic (furane, thiophene, formylfurane and formylthiophene) substituents in selected meso- and β-positions are reported. Heterocycle incorporation in the 3- and 13-positions shifted the chlorin absorption and emission to the red (up to λem =680 nm), thus these readily incorporated substituents function analogously to auxochromes present in chlorophylls, for example, formyl and vinyl groups. Photophysical, theoretical and X-ray crystallographic experiments revealed small but significant differences between the behavior of the furan- and the thiophene-based auxochromes. Four regioisomeric bis-thienylchlorins (3,10; 3,13, 3,15 and 10,15) were oxidatively electropolymerized; the chlorin monomer geometry had a profound impact on the polymerization efficiency and the electrochemical properties of the resulting material. Chemical co-polymerization of 3,13-bis-thienylchlorin with 3-hexylthiophene yielded an organic-soluble red-emitting polymer.

Directly linked hydroporphyrin dimers

The synthesis and chemical, photophysical and electrochemical characterisation of directly meso–meso- or meso-β-linked hydroporphyrin (chlorin) dimers is reported.

Light-harvesting nanorods based on pheophorbide-appending cellulose

In contrast to the success in artificial DNA- and peptide-based nanostructures, the ability of polysaccharides to self-assemble into one-, two-, and three-dimensional nanostructures are limited. Here, we describe a strategy for designing and fabricating nanorods using a regioselectively functionalized cellulose derivative at the air-water interface in a stepwise manner. A semisynthetic chlorophyll derivative, pyro-pheophorbide a, was partially introduced into the C-6 position of the cellulose backbone for the design of materials with specific optical properties. Remarkably, controlled formation of cellulose nanorods can be achieved, producing light-harvesting nanorods that display a larger bathochromic shift than their solution counterparts. The results presented here demonstrate that the self-assembly of functionalized polysaccharides on surfaces could lead the nanostructures mimicking the naturally occurring chloroplasts.

Synthesis of chlorin-sensitized near infrared-emitting lanthanide complexes

Lanthanide (Yb(3+), Nd(3+)) complexes equipped with red-absorbing hydroporphyrin (chlorin) antennae were synthesized and characterized. The syntheses are scalable, highly modular, and enable the introduction of different chlorins functionalized with a single reactive group (COOH or NH(2)). Absorption maxima were dependent on chlorin substitution pattern (monomeso aryl or dimeso aryl) and metalation state (free base or zinc chelate). The complexes benefit from dual chlorin (610-639 nm) and lanthanide (980 or 1065 nm for Yb- or Nd-complexes, respectively) emission in the biologically relevant red and near IR region of the spectrum.

Refined syntheses of hydrodipyrrin precursors to chlorin and bacteriochlorin building blocks

Bromo-substituted hydrodipyrrins are valuable precursors to synthetic bromo-chlorins and bromo-bacteriochlorins, which in turn are versatile substrates for derivatization in pursuit of diverse molecular designs. 8-bromo-2,3-dihydro-1-(1,1-dimethoxymethyl)-3,3-dimethyldipyrrin (1) is a crucial precursor in the rational synthesis of the bacteriochlorin building block 3,13-dibromo-8,8,18,18-tetramethylbacteriochlorin ( H2BC-Br3Br13) . 8-bromo-2,3,4,5-tetrahydro-1,3,3-trimethyldipyrrin (2) is a crucial precursor in the rational synthesis of the analogous 3,13-disubstituted chlorin building block (e.g. H2C-Br3M10Br13 ). The routes to 1 and 2 share a common precursor, namely 4-bromo-2-(2-nitroethyl)-1-N-tosylpyrrole (6-Ts), which is derived from pyrrole-2-carboxaldehyde. The prior seven-step synthesis of 1 from pyrrole-2-carboxaldehyde has limited access to H2BC-Br3Br13 given the large excesses of materials, extensive reliance on column chromatography, and low overall yield (1.4%). Refined procedures for synthesis of the common precursor 6-Ts as well as 1 and 2 afford the advantages of (1) diminished consumption of solvents and reagents, (2) limited or no use of chlorinated solvents, (3) limited or no chromatography, and (4) improved yields of most steps. Streamlined procedures enable the final two or three transformations to be performed without purification of intermediates. The new procedures facilitate the expedient preparation of 1 and 2 at the multigram scale.