General reaction conditions for the palladium-catalyzed vinylation of aryl chlorides with potassium alkenyltrifluoroborates

Unraveling the Potential of Vinyl Ether as an Ethylene Surrogate in Heteroarene C─H Functionalization via the Spin-Center Shift

Despite the simplicity and abundance of ethylene, its practical application presents significant hurdles due to its nature as a highly flammable gas. Herein, a strategic use of easily handled vinyl ether is reported as a latent ethylene surrogate achieved via a spin-center shift (SCS) pathway, enabling the successful three-component reaction that bridges heteroarenes and various coupling partners, including sulfinates, thiols, and phosphine oxides. Through a photoredox catalytic process, α-oxy radicals are generated by combining various radicals with phenyl vinyl ether, which are subsequently added to N-heteroarenes. Subsequently, the radical-mediated SCS pathway serves as the driving force for C─O bond cleavage, effectively engaging the phenoxy group as a leaving group. In addition, by broadening the utility of the method, a valuable synthon is provided for efficient C─H vinylation of N-heteroarenes following sulfonyl group elimination. This approach not only enriches the toolbox of synthetic methodology but also provides a more streamlined alternative, circumventing the challenges associated with direct ethylene gas usage. The versatility of the method, particularly evident in late-stage functionalizations of medicinally relevant molecules and peptides, underscores its capability to produce invaluable three-component compounds and vinylated N-heteroarene derivatives.

Conversion of 2-methyl-4-styrylquinolines into 2,4-distyrylquinolines: synthesis, and spectroscopic and structural characterization of five examples

Four new 2,4-distyrylquinolines and one 2-styryl-4-[2-(thiophen-2-yl)vinyl]quinoline have been synthesized using indium trichloride condensation reactions between aromatic aldehydes and the corresponding 2-methylquinolines, which were themselves prepared using Friedländer annulation reactions between mono- or diketones and (2-aminophenyl)chalcones: the products have all been fully characterized by spectroscopic and crystallographic methods. 2,4-Bis[(E)-styryl]quinoline, C₂₅H₁₉N, (IIa), and its dichloro analogue, 2-[(E)-2,4-dichlorostyryl]-4-[(E)-styryl]quinoline, C₂₅H₁₇Cl₂N, (IIb), exhibit different orientations of the 2-styryl unit relative to the quinoline nucleus. In each of the 3-benzoyl analogues {2-[(E)-4-bromostyryl]-4-[(E)-styryl]quinolin-3-yl}(phenyl)methanone, C₃₂H₂₂BrNO, (IIc), {2-[(E)-4-bromostyryl]-4-[(E)-4-chlorostyryl]quinolin-3-yl}(phenyl)methanone, C₃₂H₂₁BrClNO, (IId), and {2-[(E)-4-bromostyryl]-4-[(E)-2-(thiophen-2-yl)vinyl]quinolin-3-yl}(phenyl)methanone, C₃₀H₂₀BrNOS, (IIe), the orientation of the 2-styryl unit is similar to that in (IIa), but the orientation of the 4-arylvinyl units show considerable variation. The thiophene unit in (IIe) is disordered over two sets of atomic sites having occupancies of 0.926 (3) and 0.074 (3). There are no hydrogen bonds of any kind in the structure of (IIa), but in (IId), a single C-H...O hydrogen bond links the molecules into cyclic centrosymmetric R₂²(20) dimers. A combination of C-H...N and C-H...π hydrogen bonds links the molecules of (IIb) into a three-dimensional framework structure. A combination of three C-H...π hydrogen bonds links the molecules of (IIc) into sheets, and a combination of C-H...O and C-H...π hydrogen bonds forms sheets in (IIe). Comparisons are made with the structures of some related compounds.

A three-step pathway from (2-aminophenyl)chalcones to novel styrylquinoline-chalcone hybrids: synthesis and spectroscopic and structural characterization of three examples

Three new styrylquinoline-chalcone hybrids have been synthesized using a three-step pathway starting with Friedländer cyclocondensation between (2-aminophenyl)chalcones and acetone to give 2-methyl-4-styrylquinolines, followed by selective oxidation to the 2-formyl analogues, and finally Claisen-Schmidt condensation between the formyl intermediates and 1-acetylnaphthalene. All intermediates and the final products have been fully characterized by IR and ¹H/¹³C NMR spectroscopy, and by high-resolution mass spectrometry, and the three products have been characterized by single-crystal X-ray diffraction. The molecular conformations of (E)-3-{4-[(E)-2-phenylethenyl]quinolin-2-yl}-1-(naphthalen-1-yl)prop-2-en-1-one, C₃₀H₂₁NO, (IVa), and (E)-3-{4-[(E)-2-(4-fluorophenyl)ethenyl]quinolin-2-yl}-1-(naphthalen-1-yl)prop-2-en-1-one, C₃₀H₂₀FNO, (IVb), are very similar. In each compound, the molecules are linked into a three-dimensional array by hydrogen bonds, of the C-H...O and C-H...N types in (IVa), and of the C-H...O and C-H...π types in (IVb), and by two independent π-π stacking interactions. By contrast, the conformation of the chalcone unit in (E)-3-{4-[(E)-2-(2-chlorophenyl)ethenyl]quinolin-2-yl}-1-(naphthalen-1-yl)prop-2-en-1-one, C₃₀H₂₀ClNO, (IVc), differs from those in (IVa) and (IVb). There are only weak hydrogen bonds in the structure of (IVc), but a single rather weak π-π stacking interaction links the molecules into chains. Comparisons are made with some related structures.

Synthesis and spectroscopic and structural characterization of three new 2-methyl-4-styrylquinolines formed using Friedländer reactions between (2-aminophenyl)chalcones and acetone

The syntheses and structures are reported for three 4-styryl­quinoline derivatives formed by reactions between (2-amino­phen­yl)chalcones and acetone.

Three new 2-methyl-4-styryl­quinoline derivatives have been synthesized in high yields using Friedländer reactions between chalcones [1-(2-amino­phen­yl)-3-aryl­prop-2-en-1-ones] and acetone, and characterized using IR, ¹H and ¹³C NMR spectroscopy, and mass spectrometry, and by crystal structure analysis. In (E)-4-(4-fluoro­styr­yl)-2-methyl­quinoline, C₁₈H₁₄FN, (I), the mol­ecules are joined into cyclic centrosymmetric dimers by C—H⋯N hydrogen bonds and these dimers are linked into sheets by π–π stacking inter­actions. The mol­ecules of (E)-2-methyl-4-[4-(tri­fluoro­meth­yl)styr­yl]quinoline, C₁₉H₁₄F₃N, (II), are linked into cyclic centrosymmetric dimers by C—H⋯π hydrogen bonds and these dimers are linked into chains by a single π–π stacking inter­action. There are no significant hydrogen bonds in the structure of (E)-4-(2,6-di­chloro­styr­yl)-2-methyl­quinoline, C₁₈H₁₃Cl₂N, (III), but mol­ecules related by translation along [010] form stacks with an inter­molecular spacing of only 3.8628 (2) Å. Comparisons are made with the structures of some related com­pounds.

First total synthesis of ampullosine, a unique isoquinoline alkaloid isolated from Sepedonium ampullosporum, and of the related permethylampullosine

A straightforward and convenient approach toward the first total synthesis of ampullosine, a structurally unique 3-methylisoquinoline alkaloid isolated from Sepedonium ampullosporum, is reported. Access to the related O-methyl ampullosine methyl ester from a common intermediate is also disclosed. The synthetic sequence toward the natural product comprised a Kolbe-type carboxylation of 3,5-dihydroxybenzoic acid and further esterification of the diacid, followed by masking of one of the phenols through selective ester reduction and subsequent acetonide formation. Installation of the three-carbon atom required for the 3-methylpyridine ring was performed by triflation of the remaining free phenol and a Pd-catalyzed Suzuki–Miyaura reaction with potassium E-propenyltrifluoroborate. Deprotection of the acetonide, followed by partial oxidation of the benzylic alcohol to the salicylaldehyde, O-methylation of the free phenol and hydrazonation of the resulting ortho-anisaldehyde derivative gave a hydrazone-based 1-azatriene. This was further subjected to 6π-azaelectrocyclization to afford permethylampullosine (11 steps, 14% overall yield), whereas exhaustive demethylation with AlI₃ generated in situ gave ampullosine (12 steps, 3.2% global yield).

The first total synthesis of ampullosine, a unique isoquinoline isolated from Sepedonium ampullosporum, is reported. The related permethylampullosine was also synthesized.

Pd-Catalyzed Vinylation of Aryl Halides with Inexpensive Organosilicon Reagents Under Mild Conditions

Pd-catalyzed Hiyama vinylation reaction of non-activated aryl chlorides and bromides under mild conditions was developed. The use of efficient vinyl donors and electron-rich sterically hindered phosphine ligands was critical for the success of the reaction. The products of this transformation can be used for Am/Cm separation, an important challenge in nuclear fuel reprocessing. The substituent effect on Am/Cm separating selectivity was also achieved, which could contribute to the development of new chromatographic materials for the separation of Am and Cm.

A Strategy toward Icetexane Natural Products

Icetexane diterpenoids are richly complex polycyclic natural products that have been described with a variety of biological activities. We report here a general synthetic approach toward the 6-7-6 tricyclic core structure of these interesting synthetic targets based on a two-step enolate alkylation and ring-closing metathesis reaction sequence.

Gram-Scale, Stereoselective Synthesis and Biological Evaluation of (+)-Armillariol C

Natural products with heteroaromatic cores are ample and widespread in nature, with many compounds exhibiting promising therapeutic properties. (+)-Armillariol C (1a) is a furan-based natural product isolated from Armillaria species. Herein, we report the first enantioselective synthesis of (+)-armillariol C (1a, 79% overall yield), its enantiomer (1b), and four other analogues, on a gram-scale, using microwave-mediated, Suzuki-Miyaura cross-coupling and Sharpless asymmetric dihydroxylation reactions. Compounds were tested for plant- and mycelia-growth regulatory activity, with 1b, 7a, and 7b showing the strongest inhibitory properties in a lettuce assay and 7b and 9b inhibiting Flammulina velutipes.

An effective Pd nanocatalyst in aqueous media: stilbene synthesis by Mizoroki-Heck coupling reaction under microwave irradiation

Aqueous Mizoroki–Heck coupling reactions under microwave irradiation (MW) were carried out with a colloidal Pd nanocatalyst stabilized with poly(N-vinylpyrrolidone) (PVP). Many stilbenes and novel heterostilbenes were achieved in good to excellent yields starting from aryl bromides and different olefins. The reaction was carried out in a short reaction time and with low catalyst loading, leading to high turnover frequency (TOFs of the order of 100 h⁻¹). The advantages like operational simplicity, high robustness, efficiency and turnover frequency, the utilization of aqueous media and simple product work-up make this protocol a great option for stilbene syntheses by Mizoroki–Heck reaction.

Synthesis of Amino-ADT Provides Access to Hydrolytically Stable Amide-Coupled Hydrogen Sulfide Releasing Drug Targets

As additional physiological functions of hydrogen sulfide (H2S) are discovered, developing practical methods for exogenous H2S delivery is important. In particular, nonsteroidal anti-inflammatory drugs (NSAIDs) functionalized with H2S-releasing anethole dithiolethione (ADT-OH) through ester bonds are being investigated for their combined anti-inflammatory and antioxidant potential. The chemical robustness of the connection between drug and H2S-delivery components, however, is a key and controllable linkage in these compounds. Because esters are susceptible to hydrolysis, particularly under acidic conditions such as stomach acid in oral drug delivery applications, we report here a simple synthesis of amino-ADT (ADT-NH2 ) and provide conditions for successful ADT-NH2 derivatization with the drugs naproxen and valproic acid. Using UV-vis spectroscopy and HPLC analysis, we demonstrate that amide-functionalized ADT derivatives are significantly more resistant to hydrolysis than ester-functionalized ADT derivatives.

Direct catalytic cross-coupling of alkenyllithium compounds

A catalytic method for the direct cross-coupling of alkenyllithium reagents with aryl and alkenyl halides is described. The use of a catalyst comprising Pd2(dba)3/XPhos allows for the stereoselective preparation of a wide variety of substituted alkenes in high yields under mild conditions. In addition (1-ethoxyvinyl)lithium can be efficiently converted into substituted vinyl ethers which, after hydrolysis, give readily access to the corresponding methyl ketones in a one pot procedure.

Oxime-derived palladacycles as source of palladium nanoparticles

Oxime-derived palladacycles are very efficient and versatile pre-catalysts for a wide range of carbon-carbon bond coupling reactions in air, under very low loading conditions, and employing reagent-grade chemicals. This tutorial review presents the main achievements, advantages and limitations of oxime palladacycles as a source of highly active palladium nanoparticles for high-turnover catalyzed Heck, as well as other homo- and cross-coupling reactions usually carried out employing organic or aqueous solvents. Comparison with other ligandless Pd(II) catalysts is also presented. Recent advances to develop supported oxime-derived palladacycles in order to facilitate precatalyst recovery and reuse in cross-coupling reactions, especially under aqueous reaction conditions, are also discussed.