Single-Molecule Studies of Sol−Gel-Derived Silicate Films. Microenvironments and Film-Drying Conditions

Silicalite-1/PDMS Hybrid Membranes on Porous PVDF Supports: Preparation, Structure and Pervaporation Separation of Dichlorobenzene Isomers

Separation of dichlorobenzene (DCB) isomers with high purity by time− and energy−saving methods from their mixtures is still a great challenge in the fine chemical industry. Herein, silicalite-1 zeolites/polydimethylsiloxane (PDMS) hybrid membranes (silicalite-1/PDMS) have been successfully fabricated on the porous polyvinylidene fluoride (PVDF) supports to first investigate the pervaporation separation properties of DCB isomers. The morphology and structure of the silicalite-1 zeolites and the silicalite-1/PDMS/PVDF hybrid membranes were characterized by XRD, FTIR, SEM and BET. The results showed that the active silicalite-1/PDMS layers were dense and continuous without any longitudinal cracks and other defects with the silicalite-1 zeolites content no more than 10%. When the silicalite-1 zeolites content exceeded 10%, the surfaces of the active silicalite-1/PDMS layers became rougher, and silicalite-1 zeolites aggregated to form pile pores. The pervaporation experiments both in single-isomer and binary−isomer systems for the separation of DCB isomers was further carried out at 60 °C. The results showed that the silicalite-1/PDMS/PVDF hybrid membranes with 10% silicalite-1 zeolites content had better DCB selective separation performance than the silicalite-1/α−Al2O3 membranes prepared by template method. The permeate fluxes of the DCB isomers increased in the order of m−DCB < o−DCB < p−DCB both in single-isomer and binary-isomers solutions for the silicalite-1/PDMS/PVDF hybrid membranes. The separation factor of the silicalite-1/PDMS/PVDF hybrid membranes for p/o−DCB was 2.9 and for p/m−DCB was 4.6 in binary system. The permeate fluxes of the silicalite-1/PDMS/PVDF hybrid membranes for p−DCB in p/o−DCB and p/m−DCB binary−isomers solutions were 126.2 g∙m−2∙h−1 and 104.3 g∙m−2∙h−1, respectively. The thickness−normalized pervaporation separation index in p/o−DCB binary−isomers solutions was 4.20 μm∙kg∙m−2∙h−1 and in p/m−DCB binary−isomers solutions was 6.57 μm∙kg∙m−2∙h−1. The results demonstrated that the silicalite-1/PDMS/PVDF hybrid membranes had great potential for pervaporation separation of DCB from their mixtures.

Diffusion of single dye molecules in hydrated TiO2 mesoporous films

Fluorescence correlation spectroscopy (FCS) shows how the pore dimensions of thin and hydrated TiO₂ mesoporous calcined films modulate the diffusion of molecules across the pore network.

What can be learned from single molecule spectroscopy? Applications to sol-gel-derived silica materials

Single molecule spectroscopic methods are now being widely employed to probe the nanometer scale properties of sol-gel-derived silica materials. This article reviews a subset of the recent literature in this area and provides salient examples of the new information that can be obtained. The materials covered include inorganic and organically-modified silica, along with surfactant-templated mesoporous materials. Studies of molecule-matrix interactions based on ionic, hydrogen bonding and hydrophobic interactions are reviewed, highlighting the impacts of these interactions on mass transport phenomena. Quantitative investigations of molecular diffusion by single molecule tracking and fluorescence correlation spectroscopy are also covered, focusing on the characterization of anisotropic and hindered diffusion in mesoporous systems. Single molecule polarity studies are described and the new information that can be obtained from the resulting inhomogeneous distributions is discussed. Likewise, single molecule studies of silica acidity properties are reviewed, including observation of nanoscale buffering phenomena due to the chemistry of surface silanols. Finally, related single nanoparticle studies of macroporous silicas are also discussed.

Comparative study of guest charge-charge interactions within silica sol-gel

We investigated the effect of charge-charge interactions on the mobilities of rhodamine 6G (R6G), Nile Red, sulforhodamine B, and Oregon Green 514 (ORG) guest molecules within a silica sol-gel host as the guest charge progressed from positive to neutral to negative. Through classification of the mobility as fixed, tumbling, or intermediate behavior, we were able to distinguish differences in surface attraction as the guest charge was varied. On the basis of our results, an attractive charge (as tested by cationic R6G) does not contribute significantly to mobility within dry films. However, an increase in the cationic influence is observed in water-equilibrated environments. A comparison of ORG in dry and water- and phosphate-buffer-equilibrated films indicates that charge repulsion does significantly increase dye rotational mobility (to a maximum of 24 +/- 3% tumbling molecules). However, in view of the percentage of tumbling molecules found, charge-charge interactions do not appear to be the dominant force controlling guest mobility.

Single-Molecule Probing of Adsorption and Diffusion on Silica Surfaces

Single-molecule spectroscopy has emerged as a valuable tool in probing kinetics and dynamic equilibria in adsorption because advances in instrumentation and technology have enabled researchers to obtain high signal-to-noise ratios for common dyes at room temperature. Single-molecule spectroscopy was applied to the study of an important problem in chromatography: peak broadening and asymmetry in the chromatograms of pharmaceuticals, peptides, and proteins. Using DiI, a cationic dye that exhibits the same problematic chromatographic behavior, investigators showed that the adsorption sites that cause chromatographic problems are located at defects on the silica crystal surface.

Single Molecule Study of Perylene Orange Photobleaching in Thin Sol−Gel Films

The paper reports on photobleaching mechanisms of perylene orange embedded in thin sol-gel films, derived from single molecule studies. The experimental configuration uses wide-field illumination and one photon excitation of the molecules. Measurements have been performed both at ambient conditions and under vacuum in order to get information on the influence of oxygen on photobleaching in such porous samples. We have also recorded the evolution of photobleaching with respect to the excitation intensity. The results demonstrate that photobleaching from excited states higher than the first singlet and triplet states has a nonnegligible contribution as soon as the excitation energy exceeds a few hundred W/cm2 and that this process is favored in the presence of air. The study also demonstrates that perylene orange in sol-gel films is not a very efficient emitter but that photobleaching can be slow, which explains the interest for perylene orange as a good candidate to produce long lifetime solid-state lasers when embedded in monoliths of sol-gel.

Gaining insight into the nanoscale properties of sol-gel-derived silicate thin films by single-molecule spectroscopy

The application of single-molecule spectroscopic methods in studies of individual nanoscale environments within sol-gel-derived silicate thin films is reviewed. Representative examples of the experiments performed and results obtained in several studies from the authors' laboratories are given. Included are investigations of the static and dynamic polarity properties of organically modified silicate (ORMOSIL) films. The results of these studies point to nonrandom variations in the film properties, providing strong evidence for the formation of phase-separated organic- and inorganic-rich domains. Studies of single-molecule diffusion through the same films yield important evidence for the formation of liquidlike silicate oligomers that facilitate probe molecule diffusion. Finally, single-molecule studies of the local pH within individual film environments are discussed. Valuable information on the contributions of local materials' acidity variations to overall sample heterogeneity is obtained. The results of immersion studies indicate that certain molecular environments are inaccessible to external solutions over periods as long as a few hours. The article concludes with a discussion of possible future challenges in this research that may be addressed by new and existing single-molecule methods.

Single-molecule spectroscopy studies of microenvironmental acidity in silicate thin films

Single-molecule (SM) spectroscopic methods were employed to study single site variations in the acidity properties of sol-gel-derived silicate films. The pH-sensitive dye Carboxy SNARF-1 (C.SNARF-1) was used to sense film acidity. Its concentration in the films was maintained at nanomolar levels to allow for SMs to be spectroscopically interrogated. The ratio of C.SNARF-1 fluorescence at 580 nm (protonated form) and 640 nm (deprotonated form) was used to characterize local film pH. SM data were acquired both for "untreated" films and for those treated by immersion for either 1 or 8 h in phosphate solutions of different pH. The SM results prove that the spectral variability observed is dominated by static variations in the local matrix acidity. Shorter immersion times lead to relatively broad histograms and broad "titration" curves, providing clear evidence for kinetic limitations to access of certain film environments by the immersion solutions. Films subjected to longer immersion times generally exhibit narrower histograms. Particularly narrow distributions were obtained for films treated near pH 8-9, while much broader histograms were produced near pH 7. These results are attributed to the buffering effects of surface silanols near pH 9 and enhanced pH sensitivity of the dye near pH 7.

Simulations of time-dependent fluorescence in nano-confined solvents

The time-dependent fluorescence of a model diatomic molecule with a charge-transfer electronic transition in confined solvents has been simulated. The effect of confining the solvent is examined by comparing results for solutions contained within hydrophobic spherical cavities of varying size (radii of 10-20 angstroms). In previous work [J. Chem. Phys. 118, 6618 (2002)] it was found that the solute position in the cavity critically affects the absorption and fluorescence spectra and their dependence on cavity size. Here we examine the effect of cavity size on the time-dependent fluorescence, a common experimental probe of solvent dynamics. The present results confirm a prediction that motion of the solute in the cavity after excitation can be important in the time-dependent fluorescence. The effects of solvent density are also considered. The results are discussed in the context of interpreting time-dependent fluorescence measurements of confined solvent systems.

Single-Molecule Fluorescence Trajectories for Investigating Molecular Transport in Thin Silica Sol−Gel Films

Single-molecule fluorescence tracking has been used to examine diffusion of small molecules in sol-gel films in order to identify spatial heterogeneity in the structure and molecular diffusivities for different regions of the film. Fluorescence intensity profiles from single molecules are fit to a two-dimensional Gaussian function to determine their x,y positions with subpixel resolution. Scatter plots and histograms of molecular step sizes indicate that the trajectories conform to the predictions of a two-dimensional random walk. The mean-square step size is shown to be an unbiased estimate of the variance of the step-size probability distribution and a valid statistic for determining the diffusion coefficient from a molecular trajectory. The diffusion coefficients measured for different molecules are subjected to an F test, which showed that the sol-gel film exhibits spatial variation in the diffusion coefficient on a micrometer-length scale. The spatial variation in diffusivities is a measure of structural heterogeneity of these films.