Effect of Alkyl Chain Length on the Fluorescence of 9-Alkylfluorenyl Thiols as Self-Assembled Monolayers on Gold

Functionalized Gold Nanoparticles and Halogen Bonding Interactions Involving Fentanyl and Fentanyl Derivatives

Fentanyl (FTN) and synthetic analogs of FTN continue to ravage populations across the globe, including in the United States where opioids are increasingly being used and abused and are causing a staggering and growing number of overdose deaths each year. This growing pandemic is worsened by the ease with which FTN can be derivatized into numerous derivatives. Understanding the chemical properties/behaviors of the FTN class of compounds is critical for developing effective chemical detection schemes using nanoparticles (NPs) to optimize important chemical interactions. Halogen bonding (XB) is an intermolecular interaction between a polarized halogen atom on a molecule and e--rich sites on another molecule, the latter of which is present at two or more sites on most fentanyl-type structures. Density functional theory (DFT) is used to identify these XB acceptor sites on different FTN derivatives. The high toxicity of these compounds necessitated a "fragmentation" strategy where smaller, non-toxic molecules resembling parts of the opioids acted as mimics of XB acceptor sites present on intact FTN and its derivatives. DFT of the fragments' interactions informed solution measurements of XB using 19F NMR titrations as well as electrochemical measurements of XB at self-assembled monolayer (SAM)-modified electrodes featuring XB donor ligands. Gold NPs, known as monolayer-protected clusters (MPCs), were also functionalized with strong XB donor ligands and assembled into films, and their interactions with FTN "fragments" were studied using voltammetry. Ultimately, spectroscopy and TEM analysis were combined to study whole-molecule FTN interactions with the functionalized MPCs in solution. The results suggested that the strongest XB interaction site on FTN, while common to most of the drug's derivatives, is not strong enough to induce NP-aggregation detection but may be better exploited in sensing schemes involving films.

Electrochemically Triggered Surface Deposition of Polyelectrolytes

An electrochemical approach to surface deposition of polyelectrolytes on self-assembled monolayers is presented. This deposition process can be triggered facilely by a potential bias, which oxidizes ferrocene moieties included in the self-assembled monolayer to ferrocenium, whose charge compensation is fulfilled by polyelectrolytes and associated counterions. This approach is quite general, affording quantitative deposition of both polyanions and polycations with a wide range of chemical identities (synthetic polymers, peptides, and DNA) and molecular weights (10³-10⁷ Da as tested). Conventional layer-by-layer polyelectrolyte deposition can be straightforwardly combined with this method to produce electroactive polymer films. Several techniques, including voltammetry, fluorescence spectroscopy, contact angle analysis, electrochemical quartz crystal microbalance, and atomic force microscopy, were employed to characterize the deposition processes. A detailed discussion on the involved deposition mechanisms is also presented.

Fluorescent self-assembled monolayers of umbelliferone: a relationship between contact angle and fluorescence

Self-assembled monolayers (SAMs) that contain fluorophore units are nowadays widely used to tune surface properties and design new chemical sensor chips. It is well-known that the nature of the substrate may strongly interfere with the emission properties of the grafted molecules, but the organization of the monolayer may also have an important role. To study the influence of the SAM organization on the luminescence properties, we prepared different coumarin-based derivatives endowed with tethered chains of different lengths and elaborated the corresponding SAMs on glass slides. Besides SAM structural characterizations by atomic force microscopy and X-ray reflectivity, we carried out contact angle measurements and applied the Van Oss-Chaudhury-Good theory, which was rarely used previously for self-assembled monolayers. As expected, by increasing the tethered chain length, a higher surface coverage, a higher degree of organization, and a stronger molecular packing were observed. However, it appears to facilitate the self-quenching process, and thus, this strongly affects the fluorescent properties of the SAMs.

Photophysical probes for multiple-redox and multiple-excited-state interactions in molecular aggregates

Photosynthesis takes place through a highly efficient series of energy, electron, and proton transfers initiated by absorption of one or more photons within the visible region of the solar spectrum. Because of the presence of multiple chromophores needed for effective light harvesting, extinction coefficients must be very high. The absorbing multiunit array is held within a rigidly arranged structure that facilitates each electron hop. A fully artificial, yet biomimetic, alternative to photosynthesis that produces fuels directly and efficiently from sunlight and simple low molecular weight molecules would change the world. Achieving this goal requires a detailed understanding of the mechanisms of the key steps of the complex chemical and photochemical processes taking place in natural photosynthesis. One of these mechanisms relies on light harvesting to initiate multiple-step sequences to obtain combustible molecules suitable for burning. In particular, we are devising and testing photophysical models with characteristics that facilitate multiple electron transfers within a single aggregate and are directly relevant to light harvesting. We focus on structural features that promote photoinduced electron transfer at high dye densities, placed for optimal solar utilization and catalysis. The reaction producing oxygen is further complicated by the need for four electrons to complete the sequence, even though the first initiation step is presumably absorption of a single photon. Therefore we explore steps that accumulate charge or have the potential to do so. We also emphasize the synthesis of model systems that probe the complexity of individual steps. This Account examines the factors that influence the efficiency of electron redistribution in multiple-dye, multiple-excited-state, and multiple-redox equivalent arrays. Such knowledge will allow us to optimize the efficiency of electron migration and may contribute to a better understanding of multiple-equivalent light harvesting events by which photosynthetic energy storage takes place.

Kinetics study of the binding of multivalent ligands on size-selected gold nanoparticles

The effect of ligand multivalency and nanoparticle size on the binding kinetics of thiol ligands on gold nanoparticles is investigated by exchanging monovalently bound pyrene on gold nanoparticles against flexible mono- and multivalent thiol ligands. Variable-sized gold nanoparticles of 2.2 ± 0.4, 3.2 ± 0.7, and 4.4 ± 0.9 nm diameter are used as substrates. The particles are coated by thiol functionalized pyrene ligands and the binding kinetics of the thiol ligands is studied by time-resolved fluorescence spectroscopy. The effect of multivalency on the binding kinetics is evaluated by comparing the rate constants of ligands of different valency. This comparison reveals that the multivalent ligands are exchanging substantially more rapidly than the monovalent ones. A particle size dependence of the rate constants is also observed, which is used to derive structural information on the binding of the mono- and multivalent ligands to the nanoparticle surface.

Recent developments in fluorescence correlation spectroscopy for diffusion measurements in planar lipid membranes

Fluorescence correlation spectroscopy (FCS) is a single molecule technique used mainly for determination of mobility and local concentration of molecules. This review describes the specific problems of FCS in planar systems and reviews the state of the art experimental approaches such as 2-focus, Z-scan or scanning FCS, which overcome most of the artefacts and limitations of standard FCS. We focus on diffusion measurements of lipids and proteins in planar lipid membranes and review the contributions of FCS to elucidating membrane dynamics and the factors influencing it, such as membrane composition, ionic strength, presence of membrane proteins or frictional coupling with solid support.

Tunable 3D and 2D polystyrene nanoparticle assemblies using surface wettability, low volume fraction and surfactant effects

Polymer-based nanopatterning on metal surfaces is of increasing importance to a number of applications, including biosensors, bioelectronic devices and medical implants. Here we show that polycrystalline gold surfaces can be functionalized with monocomponent nanoparticle (NP) assemblies by a simple drop deposition method. Ordered 3D hexagonal close-packed structures consisting of 350 nm polystyrene (PS) NPs on hydrophobically modified gold surfaces from solutions of very low volume fraction (varphi = 0.0006) were obtained as a result of capillary force induced self-assembly, whilst 2D self-assembly of PS NPs was generated over large area on hydrophilic gold and TiO(2) surfaces by spin coating. Furthermore, we show that when Triton X-100 is added to the PS NP suspending medium longer range ordering is obtained. Our observations may initiate interesting applications in the areas of nanoengineering of metal-based sensors and as a means to design new nanostructures for biocompatible implant surfaces.

Spatially inhomogeneous enhancement of fluorescence by a monolayer of silver nanoparticles

Near-field scanning optical microscopy (NSOM) was applied to study the effect of a two-dimensional array of silver nanoparticles on the spatial distribution and magnitude of fluorescence signal enhancement for a monolayer of Rhodamine 6G (Rh6G). Twenty polyelectrolyte monolayers were deposited between the nanoparticles and the dye by a layer-by-layer deposition technique resulting in a 15-20 nm separation cushion, necessary to minimize the fluorescence signal quenching. The fluorescence signal in NSOM images was found to be distributed inhomogeneously as small (100-200 nm in diameter) fluorescent clusters with typically 5-30 times higher fluorescence intensities than a sample without nanoparticles. The position and relative intensity of the clusters was found to be dependent on the excitation wavelength, suggesting that the enhancement originates from the nanoparticle surface plasmon resonance.

DNA dissociation and degradation at gold nanoparticle surfaces

The instability of DNA-functionalized gold nanoparticles (Au-DNA conjugates) upon exposure to high temperatures is characterized using fluorescence spectroscopy, gel electrophoresis and ion-exchange chromatography. Above 70 degrees C, aqueous Au-DNA conjugates decompose within hours due to both desorption of thiol-terminated DNA from the gold nanoparticle surface and chemical degradation of DNA in the presence of colloidal gold. Although the chemical mechanism for DNA degradation was not identified in this study, the gold surface participates directly in the cleavage reaction. These results have important implications for the use of Au-DNA conjugates in biotechnological and clinical applications that require high temperatures, such as polymerase chain reaction (PCR).

Uni- and bi-directional light-induced switching of diarylethenes on gold nanoparticles

Photochromic studies of diarylethenes with their switching unit linked to the surface of gold nanoparticles via a conjugated aromatic spacer show linker-dependent switching behavior.

Electrochemical detection of nanoscale phase separation in binary self-assembled monolayers

Developing methods to probe the nature and structure of nanoscale environments continues to be a challenge in nanoscience. We report a cyclic voltammetry investigation of the internal, hydrogen-bond-driven phase separation of amide-containing thiols and alkanethiols. Amide-containing thiols with a terminal ferrocene carboxylate functional group were investigated in two binary monolayers, one homogeneously mixed and the other phase separated. The electrochemical response of the ferrocene probe was used to monitor adsorbate coverage, environment, and phase separation within each of these monolayers. The results demonstrate that the behavior of ferrocene-containing monolayers can be used to probe nanoscale organization.

Electrochemical dimerization of 2-(2'-thienyl)pyridine adsorbed on Au(111) observed by in situ fluorescence

The study of heterodentate molecules adsorbed on metal electrodes provides an opportunity to expand the functionality of modified surfaces while offering insights into the surface and intramolecular electronic interactions of organic adsorbates. The adsorption of 2-(2'-thienyl)pyridine, a molecule containing both pyridine and thiophene moieties, on a Au(111) electrode is reported. Adsorption was characterized by electrochemistry in neutral and basic aqueous electrolyte and was compared to that of pyridine. The aqueous electrochemistry of thiophene on Au(111) was also characterized for comparison purposes. At negative potentials, in the presence of 2-(2'-thienyl)pyridine, a diffuse, pi-bonded monolayer was formed, and a phase transition to a close-packed N- and/or S-bonded configuration was observed near -0.4 V in a 1 mM solution of adsorbate, similar to that seen in pyridine on Au(111). The thiophene-like oxidative dimerization of the molecule was confirmed at positive potentials using in situ fluorescence microscopy by comparison with the spectrum of the chemically synthesized dimer.

The influence of core size on electronic coupling in shell–core nanoparticles: gold clusters capped with pyrenoxylalkylthiolate

The mean size of the metallic core of monolayer-protected gold clusters densely capped with 9-(1-pyrenoxyl)octane-1-thiol or 1-dodecanethiol can be adjusted by controlling the thiol/HAuCl4 ratio during synthesis. Upon reduction of tetrachloroaurate by NaBH4, lower mean metal core diameters were attained in those composites prepared from mixtures with higher thiol/Au ratios. The efficiency of electronic coupling between the core metal cluster and pyrenyl groups appended as an outer shell in this size-graded family was studied by absorption and fluorescence spectroscopy. The observed emission intensity from the bound fluorophores is independent of the gold core size.