Spectral Properties of Fluorophores Combining the Boronic Acid Group with Electron Donor or Withdrawing Groups. Implication in the Development of Fluorescence Probes for Saccharides

Delivery of piperlongumine via hyaluronic acid/phenylboronic acid-mediated dual targetable polymersome for enhanced anticancer functionality against pancreatic tumor

Pancreatic cancer cells highly resistance to conventional chemo drugs, resulting low survival rates. The aim of the study was to design and develop dual targeting polymersomes (DTPS) loaded with phyto alkaloid agent i.e., piperlongumine (PL) for effective pancreatic cancer treatment. Here, hyaluronic acid (HA) was functionalized with 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino(polyethylene glycol)-2000] (DSPEPEG-NH2), poly(ethylene glycol) bis (amine) (PEG), and phenylboronic acid (PBA) moieties. The designed DTPS could selectively recognize CD44/sialic acid (SA) and deliver PL to MIA PaCa-2 pancreatic cancer cells, facilitated via HA-CD44 and PBA-SA interactions. Drug release and stability results implied sustained PL release profile and pH sensitivity. DTPS could be more efficiently bound with SA than other sugars based on fluorescence spectroscopy. The anticancer efficacy of designed polymersomes was tested with H6C7 normal pancreas cells and SA/CD44-overexpressed MIA PaCa-2 pancreatic cancer cells. DTPS showed both SA and CD44-mediated higher cellular uptake while single-targeted polymersomes showed CD44-mediated cellular uptake. The PL-loaded DTPS efficiently uptake by MIA PaCa-2 cancer cells, causing up to 80 % cell growth inhibition, reduced cell spheroids volume and increased dead cells by 58.3 %. These results indicate that the newly developed DTPS can effectively serve as a pH-responsive drug delivery system for efficient treatment of cancer.

Highly sensitive fluorescence turn-OFF and reversible chemical sensor for Hg2+ ion based on pyrene appended 2-thiohydantoin

A novel fluorometric chemical sensor (PY-2TH) based on 2-thiohydantoin (2TH) in conjugation with pyrene (PY) was designed by facile one-pot Knoevenagel condensation reaction and explored for the sensitive and selective detection of Hg2+ ion in solution and solid state methods. Different analytical techniques like NMR and LC-MS concomitantly confirmed the structure of PY-2TH. Absorption and emission studies demonstrate positive solvatochromic effects indicating intramolecular charge transfer in polar solvents. PY-2TH exhibits unprecedented selectivity for detecting Hg2+ ions in tetrahydrofuran (THF) through turn-OFF fluorescence with 90% decrease in the emission intensity with a limit of detection (LOD) of ∼4.4 ppb. The mechanistic investigation through NMR and optical studies confirm the formation of a 2:1 complex between PY-2TH and Hg2+. Thin films of PY-2TH exhibits the J-aggregate formation in the solid state leading to a shift in the emission towards the near-infrared region. Further, we have demonstrated the applicability of PY-2TH for detection of Hg2+ ions and fluorescence imaging in live Zebrafish larvae and the toxicological effects are explored. Cytotoxic evaluation on Zebrafish larval cells revealed that PY-2TH is found to be non-toxic. Detailed analysis demonstrate the potential of PY-2TH for ultra-sensitive Hg2+ ion detection and removal in aqueous environments, highlighting its applicability for identification of metal contamination in live organisms and environmental toxicity.

Investigation of Mechanochromic Luminescence of Pyrene-based Aggregation-Induced Emission Luminogens: Correlation between Molecular Packing and Luminescence Behavior

To better understand the correlation between molecular structure and optical properties such as aggregation-induced emission (AIE) and mechanochromic luminescence (MCL) emission, two new pyrene-based derivatives with substitutions at the 4- and 5-positions (1HH) and at the 4-, 5-, 9-, and 10-positions (2HH) were designed and synthesized. Cyano groups were introduced at the periphery of the synthesized compounds (1HCN, 1OCN, 1BCN, 2HCN, 2OCN, and 2BCN) to investigate the influence of these groups on the emission properties of the pyrene derivatives both in solution and in the solid state. The fluorescence emission performance of these compounds in water/acetone mixtures was simultaneously studied, revealing outstanding aggregation-induced emission properties. The typical shift in emission maxima to higher values was attributed to J-aggregate formation in the aggregate state. Careful investigation of the crystal structures demonstrated abundant and intense intermolecular interactions, such as C-H…π and C-H…N hydrogen bonds, contributing to the remarkable mechanochromic luminescence performance of these compounds. The MCL properties of all the compounds were investigated using powder X-ray diffraction, and the remarkable mechanochromic properties were attributed to J-aggregate phenomena in the solid state. These results provide valuable insights into the structure-property relationship of organic MCL materials, guiding the design of efficient organic MCL materials.

Recent Progress in Diboronic-Acid-Based Glucose Sensors

Non-enzymatic sensors with the capability of long-term stability and low cost are promising in glucose monitoring applications. Boronic acid (BA) derivatives offer a reversible and covalent binding mechanism for glucose recognition, which enables continuous glucose monitoring and responsive insulin release. To improve selectivity to glucose, a diboronic acid (DBA) structure design has been explored and has become a hot research topic for real-time glucose sensing in recent decades. This paper reviews the glucose recognition mechanism of boronic acids and discusses different glucose sensing strategies based on DBA-derivatives-based sensors reported in the past 10 years. The tunable pK_a, electron-withdrawing properties, and modifiable group of phenylboronic acids were explored to develop various sensing strategies, including optical, electrochemical, and other methods. However, compared to the numerous monoboronic acid molecules and methods developed for glucose monitoring, the diversity of DBA molecules and applied sensing strategies remains limited. The challenges and opportunities are also highlighted for the future of glucose sensing strategies, which need to consider practicability, advanced medical equipment fitment, patient compliance, as well as better selectivity and tolerance to interferences.

Recycled Plastic Content Quantified through Aggregation-Induced Emission

The linearity of the plastics economy is wasteful and polluting. To encourage recycling and decrease diversion to landfill, new legislation within the EU and UK will tax single-use plastic products made with less than 30% recycled plastic. At present, quantitative determination of recycled content is elusive and existing methods are inconsistent. We present a fluorescence-based analytical technique to determine recycled content in plastic and (single use) packaging. Bathochromic shifts resulting from aggregation of the fluorescent brightener 4,4'-bis(2-benzoxazolyl) stilbene (BBS) in three commodity plastics [high-density polyethylene, polypropylene, and poly(ethylene terephthalate)] at loadings ≤0.5 wt % were used to systematically quantify simulated recycled contents as low as 10 wt %. Linear correlations were found between recycled content and three fluorescence-based properties: emission, lifetime, and resulting color. We demonstrate how this multi-branched verification system is completely independent of sample dimensions and processing conditions, has a negligible effect on polymer properties, and is inexpensive and highly compatible with existing recycling infrastructure.

A selective hybrid fluorescent sensor for fructose detection based on a phenylboronic acid and BODIPY-based hydrophobicity probe

Fructose is widely used in the food industry. However, it may be involved in diseases by generating harmful advanced glycation end-products. We have designed and synthesized a novel fluorescent probe for fructose detection by combining a phenylboronic acid group with a BODIPY-based hydrophobicity probe. This probe showed a linear fluorescence response to d-fructose concentration in the range of 100-1000 μM, with a detection limit of 32 μM, which is advantageous for the simple and sensitive determination of fructose.

From cow manure to bioactive carbon dots: a light-up probe for bioimaging investigations, glucose detection and potential immunotherapy agent for melanoma skin cancer

Bioactive carbon dots (C-dots) with ca. 4 nm were successfully produced with singular photophysical properties, low-toxicity and interesting immunological response. The optical properties of the C-dots were investigated and the "light-up" behaviour enabled them to be explored in glucose detection and bioimaging experiments (mitochondrial selective probe). C-dots were not selective to the tumour region and several fluorescent spots were visualized spread on animal bodies. The histology investigations showed that cancer-bearing mice treated with C-dots presented a large number of regions with necrosis and inflammatory infiltrates, which were not identified for cancer-bearing mice without the treatment. These results suggested that C-dots have the potential to be explored as an immune therapy agent for melanoma skin cancer.

Post-polymerization modification of polybenzoxazines with boronic acids supported by B–N interactions

Polybenzoxazines (PBZs) were modified using the reactivity of their inherent bis(2-hydroxybenzyl)amine (BHBA) units toward boronic acids, RB(OH)2.

Efficient Conversion of Glucose into Fructose via Extraction-Assisted Isomerization Catalyzed by Endogenous Polyamine Spermine in the Aqueous Phase

In the present study, natural polyamine spermine is demonstrated as a potential basic catalyst for glucose-to-fructose isomerization. For instance, spermine achieves a decent fructose yield (30% wt) and selectivity (74%) during the single-step aqueous phase isomerization under the modest operating conditions (100 °C for 15 min). In addition to the expected reaction byproduct monosugar mannose, spermine also assists in the synthesis of rare and important monosugar, that is, psicose up to 4% wt. Psicose is a zero calorie rare sugar, exhibits a low caloric value, and possesses anti-adipogenic property. A comparative study involving other polyamines concluded that the presence of 20 amines tends to exhibit the most significant impact in improving the target product yield by releasing a higher number of OH- ions, which are responsible for isomerization through the formation of an enediol anion. An attempt was made to further improve the fructose yield through the addition of neutral salts, but it promoted a meager achievement. In an alternate study, a selective extraction strategy was followed for the isolation of fructose from the reaction mixture. The employed aryl monoboronic acid remarkably improved the net fructose concentration, that is, fructose productivity up to 75% wt (cumulative) and 70% selectivity within three consecutive extractions and isomerization cycles, which is comparatively three times shorter than that reported in the literature. Notably, spermine itself provided the essential and necessary basic environment for selective fructose extraction and glucose isomerization, ruling out the use of any external reagents and thus establishing itself as a versatile material suitable for a typical isomerization reaction in an upscaled reactor.

A Quantum Dot-Based FLIM Glucose Nanosensor

In the last few years, quantum dot (QD) nanoparticles have been employed for bioimaging and sensing due to their excellent optical features. Most studies have used photoluminescence (PL) intensity-based techniques, which have some drawbacks, especially when working with nanoparticles in intracellular media, such as fluctuations in the excitation power, fluorophore concentration dependence, or interference from cell autofluorescence. Some of those limitations can be overcome with the use of time-resolved spectroscopy and fluorescence lifetime imaging microscopy (FLIM) techniques. In this work, CdSe/ZnS QDs with long decay times were modified with aminophenylboronic acid (APBA) to achieve QD-APBA conjugates, which can act as glucose nanosensors. The attachment of the boronic acid moiety on the surface of the nanoparticle quenched the PL average lifetime of the QDs. When glucose bonded to the boronic acid, the PL was recovered and its lifetime was enhanced. The nanosensors were satisfactorily applied to the detection of glucose into MDA-MB-231 cells with FLIM. The long PL lifetimes of the QD nanoparticles made them easily discernible from cell autofluorescence, thereby improving selectivity in their sensing applications. Since the intracellular levels of glucose are related to the metabolic status of cancer cells, the proposed nanosensors could potentially be used in cancer diagnosis.

Development of ratiometric carbohydrate sensor based on boron dipyrromethene (BODIPY) scaffold

We designed a ratiometric carbohydrate sensor consisting of the boron dipyrromethene fluorophore substituted with boronic acid at the 2-position, based upon the strong substituent dependency of the absorbance/fluorescence wavelengths of BODIPY. The substituent is in equilibrium between the boronic acid B(OH)₂ and boronate (B(OH)₃^-) forms, which have different absorbance/fluorescence wavelengths in the visible region. Reaction of the boronic acid moiety with hydroxy groups of carbohydrate affords a cyclic ester and shifts the equilibrium in favor of the boronate (B(OR)₃^-) form, resulting in a carbohydrate-concentration-dependent change of the fluorescence ratio. Thus, the sensor, BA-BODIPY, can ratiometrically detect carbohydrate at a pH near the pK_a of cyclic ester formation.

Highly Sensitive Detection of Benzoyl Peroxide Based on Organoboron Fluorescent Conjugated Polymers

The method capable of rapid and sensitive detection of benzoyl peroxide (BPO) is necessary and receiving increasing attention. In consideration of the vast signal amplification of fluorescent conjugated polymers (FCPs) for high sensitivity detection and the potential applications of boron-containing materials in the emerging sensing fields, the organoboron FCPs, poly (3-aminophenyl boronic acid) (PABA) is directly synthesized via free-radical polymerization reaction by using the commercially available 3-aminophenyl boronic acid (ABA) as the functional monomer and ammonium persulfate as the initiator. PABA is employed as a fluorescence sensor for sensing of trace BPO based on the formation of charge-transfer complexes between PABA and BPO. The fluorescence emission intensity of PABA demonstrates a negative correlation with the concentration of BPO. And a linear range of 8.26 × 10⁻⁹ M–8.26 × 10^–4 M and a limit of detection of 1.06 × 10^–9 M as well as a good recovery (86.25%–111.38%) of BPO in spiked real samples (wheat flour and antimicrobial agent) are obtained. The proposed sensor provides a promising prospective candidate for the rapid detection and surveillance of BPO.

Highly Selective Fluorescence Sensing and Imaging of ATP Using a Boronic Acid Groups-Bearing Polythiophene Derivate

A boronic acid groups-bearing polythiophene derivate (L) was designed and synthesized for highly sensitive fluorescence detection of ATP based on a multisite-binding coupled with analyte-induced aggregation strategy. L has a polythiophene backbone as fluorophores and two functional side groups, i.e., quaternary ammonium group and boronic acid group, as multibinding sites for ATP. When various structural analogues such as ADP, AMP, and various inorganic phosphates were added into the aqueous solution of L, only ATP caused a remarkable fluorescence quenching of about 60-fold accompanied by obvious color changes of solution from yellow to purple. The detection limit is estimated to be 2 nM based on 3σ/slope. With the advantage of good water solubility, low toxicity, and highly selective response to ATP, L was successfully utilized as a probe to real-time assay activity of adenylate kinase (ADK) and map fluorescent imaging of ATP in living cells.

Modification of amine-cured epoxy resins by boronic acids based on their reactivity with intrinsic diethanolamine units

Amine-cured epoxy polymers were modified after curing, exploiting the reactivity of their intrinsic diethanolamine (DEA) units toward boronic acids. The condensation of DEA units with various boronic acids resulted in changes in the thermal, mechanical, and optical properties of the original amine-cured epoxy polymers.

Design and self-assembly of albumin nanoclusters as a dynamic-covalent targeting co-delivery and stimuli-responsive controlled release platform

Stimuli-responsive nanomaterial-based drug delivery systems that are able to actively target the tumor microenvironment, enhance intratumoral accumulation and release drugs at target sites are attractive therapeutic platforms at present. Here, the first approach that uses proteins to construct dynamic-covalent targeting stimuli-responsive cationic albumin nanoclusters for the highly efficient co-delivery of siRNA and DOX in vitro and in vivo has been developed and achieved considerable efficacy in combination therapy for the growth, migration and invasion of cancer. In this study, the critical strategy of 'dynamic-covalent targeting', as previously mentioned, was developed for the active accumulation of drugs at target sites by fabricating a reversible PEG corona using a pH-sensitive borate ester so as to facilitate the formation of a compact complex and the efficient release of siRNA with or from the nanocluster. In addition, after internalization, the nanocluster can dissociate into cationic albumin via intracellular reduction in an acid environment to achieve stimuli-responsive triggered drug release. As a result, the nanocluster for the co-delivery of DOX and VEGF-siRNA exhibits highly efficient capacity for gene silencing and apoptosis-inducing ability and also markedly suppresses the migration and invasion of cancer cells. Most importantly, it displayed significant combination effects against tumor growth with minimal damage to major organs and provides an effective approach for the safe and efficient delivery of multiple cargoes at target sites.

Low temperature synthesis of NbC/C nano-composites as visible light photoactive catalyst

A facile carbothermal route was adopted to obtain niobium carbide nanoparticles (NPs) embedded in carbon network from Nb2O5 to study photocatalytic behavior. Optimization of synthesis parameters to obtain single phase NbC NPs has been successfully done. The phase identification, morphology and nature of carbon were determined with the help of X-ray diffraction, transmission electron microscopy (TEM) and Raman spectroscopy. X-ray photoelectron spectroscopy (XPS) suggested the presence of multiple oxidation states of Nb associated to NbC and NbCxOy centers on the surface of NPs. Due to the presence of NbCxOy on the surface of NPs, absorption under visible region of EM spectrum has been observed by UV-visible spectroscopy. Different organic dyes (RhB, MB and MO) were used to study the effect of holding time on the photocatalytic performance of as-synthesized samples. RhB dye was found to be the most sensitive organic molecule among all the considered dyes and degraded 78% in 120 min.

Boronate-Based Fluorescence Probes for the Detection of Hydrogen Peroxide

In this work, we synthesized a series of boronate ester fluorescence probes (E)-4,4,5,5-tetramethyl-2-(4-styrylphenyl)-1,3,2-dioxaborolane (STBPin), (E)-N,N-dimethyl-4-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)styryl)aniline (DSTBPin), (E)-4-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)styryl)benzonitrile (CSTBPin), (E)-2-(4-(4-methoxystyryl)phenyl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (MSTBPin), (E)-N,N-dimethyl-4-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)styryl)naphthalen-1-amine (NDSTBPin), and N,N-dimethyl-4-(2-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)oxazol-5-yl)aniline (DAPOX-BPin) for the detection of hydrogen peroxide (H2O2). DSTBPin and MSTBPin displayed an "Off-On" fluorescence response towards H2O2, owing to the loss of the intramolecular charge transfer (ICT) excited state. Whereas, CSTBPin displayed a decrease in fluorescence intensity in the presence of H2O2 owing to the introduction of an ICT excited state. STBPin, on the other hand, produced a small fluorescence decrease, indicating the importance of an electron-withdrawing or electron-donating group in these systems. Unfortunately, the longer wavelength probe, NDSTBPin, displayed a decrease in fluorescence intensity. Oxazole-based probe DAPOX-BPin produced a "turn-on" response. Regrettably, DAPOX-BPin required large concentrations of H2O2 (>3 mm) to produce noticeable changes in fluorescence intensity and, therefore, no change in fluorescence was observed in the cell imaging experiments.

Fructose recognition using new “Off–On” fluorescent chemical probes based on boronate-tagged 1,8-naphthalimide

A fluorescent probe with a planar structure was designed based on a PET mechanism to detect fructose with lower LOD than analytical methods.

Near infrared photoluminescence modulation of single-walled carbon nanotubes based on a molecular recognition approach

The molecular recognition approach has achieved near infrared photoluminescence modulation on locally-functionalized single-walled carbon nanotubes.

A new boronic acid fluorescent sensor based on fluorene for monosaccharides at physiological pH

Fluorescent boronic acids are very useful fluorescent sensor for detection of biologically important saccharides. Herein we synthesized a new fluorene-based fluorescent boronic acid that shows significant fluorescence changes upon addition of saccharides at physiological pH. Upon addition of fructose, sorbitol, glucose, galactose, ribose, and maltose at different concentration to the solution of 7-(dimethylamino)-9,9-dimethyl-9H-fluoren-2-yl-2-boronic acid (7-DMAFBA, 1), significant decreases in fluorescent intensity were observed. It was found that this boronic acid has high affinity (K(a)=3582.88 M(-1)) and selectivity for fructose over glucose at pH=7.4. The sensor 1 showed a linear response toward d-fructose in the concentrations ranging from 2.5×10(-5) to 4×10(-4) mol L(-1) with the detection limit of 1.3×10(-5) mol L(-1).

Effects of cyclodextrins on intramolecular photoinduced electron transfer in a boronic acid fluorophore

An inclusion complex consisting of a boronic acid fluorophore (C1-APB) and β-cyclodextrin (β-CyD) acts as a supramolecular sugar sensor whose response mechanism is based on photoinduced electron transfer (PET) from the excited pyrene to the boronic acid. We have investigated the PET process in C1-APB/CyD complexes by using time-resolved photoluminescence (TRPL) measurements at room temperature, and have succeeded in estimating the electron-transfer time to be about 1 ns. We have also studied the effects of CyDs on the PET process by comparing two kinds of CyDs (α-CyD, β-CyD) under different water-dimethyisulfoxide (DMSO) concentration conditions. We found that the CyDs interacting with the boronic acid moiety completely inhibits PET quenching and increases the monomer fluorescence intensity.

Glucose monitoring using a polymer brush modified polypropylene hollow fiber-based hydraulic flow sensor

Tight regulation of blood glucose levels of diabetic patients requires durable and robust continuous glucose sensing schemes. This manuscript reports the fabrication of ultrathin, phenylboronic acid (PBA) functionalized polymer brushes that swell upon glucose binding and which were integrated as the sensing interface in a new polypropylene hollow fiber (PPHF)-based hydraulic flow glucose sensor prototype. The polymer brushes were prepared via surface-initiated atom transfer radical polymerization of sodium methacrylate followed by postpolymerization modification with 3-aminophenyl boronic acid. In a first series of experiments, the glucose-response of PBA-functionalized poly(methacrylic acid) (PMAA) brushes grafted from planar silicon surfaces was investigated by quartz crystal microbalance with dissipation (QCM-D) and atomic force microscopy (AFM) experiments. The QCM-D experiments revealed a more or less linear change of the frequency shift for glucose concentrations up to ∼10 mM and demonstrated that glucose binding was completely reversible for up to seven switching cycles. The AFM experiments indicated that glucose binding was accompanied by an increase in the film thickness of the PBA functionalized PMAA brushes. The PBA functionalized PMAA brushes were subsequently grafted from the surface of PPHF membranes. The hydraulic permeability of these porous fibers depends on the thickness and swelling of the PMAA brush coating. PBA functionalized brush-coated PPHFs showed a decrease in flux upon exposure to glucose, which is consistent with swelling of the brush coating. Because they avoid the use of enzymes and do not rely on an electrochemical transduction scheme, these PPHF-based hydraulic flow sensors could represent an interesting alternative class of continuous glucose sensors.

Aggregation induced emission enhancement of 4,4′-bis(diethylamino)benzophenone with an exceptionally large blue shift and its potential use as glucose sensor

Aggregation induced emission enhancement of 4,4′-bis(diethylamino)benzophenone with exceptionally blue shift is observed and it is used for potential glucose sensor.

Synthesis, structures and electrochemical and photophysical properties of anilido-benzoxazole boron difluoride (ABB) complexes

Four-ring-fused anilido-benzoxazole boron difluoride (ABB) dyes were synthesized, and exhibited very bright luminescence in solution (Φ_f = 0.45–0.96 in CH₂Cl₂) and in the solid-state (Φ_f = 0.07–0.37).

Fluorene-based boronic acids as fluorescent chemosensor for monosaccharides at physiological pH

Two fluorene-based boronic acids, 9,9-dimethyl-9H-fluoren-2-yl-2-boronic acid (1) and 9,9-dimethyl-9H-fluoren-2,7-diyl-2,7-diboronic acid (2), were synthesized and their sensing abilities for detection of D-monosaccharides were investigated by fluorescence at physiological pH. It was found that both boronic acids 1 and 2 have high selectivity and sensitivity for D-fructose with stability constant of 47.2 and 412.9, respectively. The sensor 2 showed a linear response toward D-fructose in the concentration range from 5 × 10(-5) to 10(-1) mol L(-1) with the detection limit of 2 × 10(-5) mol L(-1).

Reporter-free potentiometric sensing of boronic acids and their reactions by using quaternary ammonium salt-functionalized polymeric liquid membranes

The tremendous applications of boronic acids (BAs) in chemical sensing, medical chemistry, molecular assembly, and organic synthesis lead to an urgent demand for developing effective sensing methods for BAs. This paper reports a facile and sensitive potentiometric sensor scheme for heterogeneous detection of BAs based on their unexpected potential responses on quaternary ammonium salt-doped polymeric liquid membranes. (11)B NMR data reveal that a quaternary ammonium chloride can trigger the hydrolysis of an electrically neutral BA in an aprotic solvent. Using the quaternary ammonium salt as the receptor, the BA molecules can be extracted from the sample solution into the polymeric membrane phase and undergo the concomitant hydrolysis. Such salt-triggered hydrolysis generates H(+) ions, which can be coejected into the aqueous phase with the counterions (e.g., Cl(-)) owing to their high hydrophilicities. The perturbation on the ionic partition at the sample-membrane interface changes the phase boundary potential and thus enables the potentiometric sensing of BAs. In contrast to other transduction methods for BAs, for which labeled or separate reporters are exclusively required, the present heterogeneous sensing scheme allows the direct detection of BAs without using any reporter molecules. This technique shows superior detection limits for BAs (e.g., 1.0 × 10(-6) M for phenylboronic acid) as compared to previously reported methods based on colorimetry, fluorimetry, and mass spectrometry. The proposed sensing strategy has also been successfully applied to potentiometric indication of the BA reactions with hydrogen peroxide and saccharides, which allows indirect and sensitive detection of these important species.

Ratiometric fluorescence sensing of sugars via a reversible disassembly and assembly of the peptide aggregates mediated by sugars

An amphiphilic dipeptide (1) bearing pyrene and phenylboronic acid was demonstrated as a unique example of a ratiometric sensing system for sugars by reversibly converting the peptide aggregates into the monomer form of the complex with sugars in aqueous solutions.

Phenylboronic acid-installed polymeric micelles for targeting sialylated epitopes in solid tumors

Ligand-mediated targeting of nanocarriers to tumors is an attractive strategy for increasing the efficiency of chemotherapies. Sialylated glycans represent a propitious target as they are broadly overexpressed in tumor cells. Because phenylboronic acid (PBA) can selectively recognize sialic acid (SA), herein, we developed PBA-installed micellar nanocarriers incorporating the parent complex of the anticancer drug oxaliplatin, for targeting sialylated epitopes overexpressed on cancer cells. Following PBA-installation, the micelles showed high affinity for SA, as confirmed by fluorescence spectroscopy even at intratumoral pH conditions, i.e., pH 6.5, improving their cellular recognition and uptake and enhancing their in vitro cytotoxicity against B16F10 murine melanoma cells. In vivo, PBA-installed micelles effectively reduced the growth rate of both orthotopic and lung metastasis models of melanoma, suggesting the potential of PBA-installed nanocarriers for enhanced tumor targeting.