Improved Brønsted Acidity of Mesoporous [Al]MCM-41 Material Treated with Ammonium Fluoride

Role of lattice strain in bifunctional catalysts for tandem furfural hydrogenation–esterification

This research represents that the bifunctional catalyst (Cu/RHSiO2–Al–Mg) which has the lowest lattice strain can significantly enhance catalytic reactivity such as the furfural conversion into furfural acetate.

Mesoporous Sn-In-MCM-41 Catalysts for the Selective Sugar Conversion to Methyl Lactate and Comparative Life Cycle Assessment with the Biochemical Process

The use of biomass for the production of energy and higher added value products is a topic of increasing interest in line with growing environmental concerns and circular economy. Mesoporous material Sn-In-MCM-41 was synthesized for the first time and used as a catalyst for the transformation of sugars to methyl lactate (ML). This catalyst was characterized in depth by various techniques and compared with Sn-MCM-41 and In-MCM-41 catalysts. In the new Sn-In-MCM-41 material, both metals, homogeneously distributed throughout the mesoporous structure of MCM-41, actuate in a cooperative way in the different steps of the reaction mechanism. As a result, yields to ML of 69.4 and 73.9% in the transformation of glucose and sucrose were respectively reached. In the case of glucose, the ML yield 1.5 and 2.6 times higher than those of Sn-MCM-41 and In-MCM-41 catalysts, respectively. The Sn-In-MCM-41 catalyst was reused in the transformation of glucose up to four cycles without significant loss of catalytic activity. Finally, life cycle assessment comparison between chemical and biochemical routes to produce ML allowed us to conclude that the use of Sn-In-MCM-41 reduces the environmental impacts compared to Sn-MCM-41. Nevertheless, to make the chemical route comparable to the biochemical one, improvements in the catalyst and ML synthesis have to be achieved.

Enhancement of p-Xylene Selectivity in the Reaction between 2,5-Dimethylfuran and Ethanol over Ammonium Fluoride Modified ZSM-5 Zeolite

The renewable synthesis of p-xylene (PX) via Diels-Alder cycloaddition of biomass derived 2,5-dimethylfuran (2,5-DMF) and ethanol was realized over various catalysts. In the tandem reaction, multiple competitive reactions exist, among...

Engineering the Distinct Structure Interface of Subnano-alumina Domains on Silica for Acidic Amorphous Silica-Alumina toward Biorefining

Amorphous silica-aluminas (ASAs) are important solid catalysts and supports for many industrially essential and sustainable processes, such as hydrocarbon transformation and biorefining. However, the wide distribution of acid strength on ASAs often results in undesired side reactions, lowering the product selectivity. Here we developed a strategy for the synthesis of a unique class of ASAs with unvarying strength of Brønsted acid sites (BAS) and Lewis acid sites (LAS) using double-flame-spray pyrolysis. Structural characterization using high-resolution transmission electron microscopy (TEM) and solid-state nuclear magnetic resonance (NMR) spectroscopy showed that the uniform acidity is due to a distinct nanostructure, characterized by a uniform interface of silica-alumina and homogeneously dispersed alumina domains. The BAS population density of as-prepared ASAs is up to 6 times higher than that obtained by classical methods. The BAS/LAS ratio, as well as the population densities of BAS and LAS of these ASAs, could be tuned in a broad range. In cyclohexanol dehydration, the uniform Brønsted acid strength provides a high selectivity to cyclohexene and a nearly linear correlation between acid site densities and cyclohexanol conversion. Moreover, the concerted action of these BAS and LAS leads to an excellent bifunctional Brønsted-Lewis acid catalyst for glucose dehydration, affording a superior 5-hydroxymethylfurfural yield.

Dendritic Mesoporous Silica Nanoparticle Adjuvants Modified with Binuclear Aluminum Complex: Coordination Chemistry Dictates Adjuvanticity

Aluminum-containing adjuvants used in vaccine formulations suffer from low cellular immunity, severe aggregation, and accumulation in the brain. Conventional aluminosilicates widely used in the chemical industry focus mainly on acidic sites for catalytic applications, but they are rarely used as adjuvants. Reported here is an innovative "ligand-assisted steric hindrance" strategy to create a high density of six-coordinate ^VI Al-OH groups with basicity on dendritic mesoporous silica nanoparticles as new nanoadjuvants. Compared to four-coordinate ^IV Al-modified counterparts, ^VI Al-OH-rich aluminosilicate nanoadjuvants enhance cellular delivery of antigens and provoke stronger cellular immunity. Moreover, the aluminum accumulation in the brain is more reduced than that with a commercial adjuvant. These results show that coordination chemistry can be used to control the adjuvanticity, providing new understanding in the development of next-generation vaccine adjuvants.

Effect of aluminum and sodium on the sorption of water and methanol in microporous MFI-type zeolites and mesoporous SBA-15 materials

The interaction and nature of surface sites for water and methanol sorption on MFI-type zeolites and mesoporous SBA-15 were investigated by solid-state NMR spectroscopy and correlated with the desorption enthalpies determined via TGA/DSC. For siliceous Silicalite-1, 29Si CPMAS NMR studies support stronger methanol than water interactions with SiOH groups of Q3-type. On siliceous SBA-15, SiOH groups of Q2-type are accompanied by an enhanced hydrophilicity. In aluminum-containing Na-ZSM-5, Na+ cations are strong adsorption sites for water and methanol as evidenced by 23Na MAS NMR in agreement with high desorption enthalpies of ΔH = 66–74 kJ/mol. Solid-state NMR of aluminum-containing Na-[Al]SBA-15, in contrast, has shown negligible water and methanol interactions with sodium and aluminum. Desorption enthalpies of ΔH = 44–60 kJ/mol hint at adsorption sites consisting of SiOH groups influenced by distant framework aluminum. On H-ZSM-5, Brønsted acidic OH groups are strong adsorption sites as indicated by partial protonation of water and methanol causing low-field shifts of their 1H MAS NMR signals and enhanced desorption enthalpies. Due to the small number of Brønsted acid sites in aluminum-containing H-[Al]SBA-15, water and methanol adsorption on this material is suggested to mainly occur at SiOH groups with distant framework aluminum species, as in the case of Na-[Al]SBA-15.

Tuneable Acidity in Fluorinated Al-SBA-15 Materials for the Esterification of Valeric Acid to Alkyl Valerates

The acidity of Al-SBA-15 materials functionalized by ball milling with several niobium loadings (0. 25-1 wt.%) as well as with several fluorine loadings (by wet impregnation using NH₄F as a precursor) was characterized and materials investigated in the esterification of valeric acid to alkyl valerates. The parent Al-SBA-15 support as well as the modified materials loaded with Nb and/or F have been catalysts synthesized characterized by X-ray diffraction (XRD), N₂ physisorption measurements, and diffuse reflection infrared spectroscopy (DRIFT) among others. A special interest was paid on the acidity of the materials that was investigated by temperature-programmed desorption of pyridine. Interestingly, the characterization results for the materials containing fluorine showed up an increase in the acidity strength despite of a reduction in the number of acid sites. The catalytic performance of the as-prepared catalysts was investigated in the microwave-assisted esterification reaction of valeric acid to valerate esters. Thus, while the materials modified with niobium exhibited a lower catalytic activity as compared with the catalytic support (Al-SBA-15), the materials loaded with fluorine either onto Al-SBA-15 or on Nb1%/Al-SBA-15 materials presented enhanced conversion values of valeric acid. Therefore, it can be said that the new acid sites with enhanced strength formed by the incorporation of fluorine boost the esterification of valeric acid with alcohols to form the respective valerate ester.

Improved high-temperature hydrothermal stability of Cu-SSZ-13 by an ammonium hexafluorosilicate treatment

Cu-SSZ-13 catalysts were treated with ammonium hexafluorosilicate (AHFS) to improve their hydrothermal stabilities.

Influence of support acidity on the performance of size-confined Pt nanoparticles in the chemoselective hydrogenation of acetophenone

Chemoselectivity of hydrogenation depends on strength of the covered BAS, whereas the free BAS enhance the rate.

Mutable Lewis and Brønsted acidity of aluminated SBA-15 as revealed by NMR of adsorbed pyridine-15N

(1)H and variable-temperature (15)N NMR techniques have been used to study the effect of the gradual alumination of SBA-15 on the structure and adsorption properties of this mesoporous material. The interpretation of experimental spectra suggests that aluminum chlorhydrol most effectively reacts with silica surfaces in the confinement of the cavities of rough mesopore walls, instead of forming a homogeneous aluminum film. This first leads to a gradual filling of the cavities and finally results in aluminum islands on the inner surfaces of mesopores. In the sample with a Si/Al atomic ratio of 4.1, up to half of the inner surface area of the mesopores is covered with aluminum. The alumination produces Brønsted acid sites attributed to silanol groups interacting with aluminum but does not affect the proton-donating ability of isolated silanol groups. At high Si/Al ratios, the surface contains only one type of Lewis site attributed to tetracoordinated aluminum. At lower Si/Al ratios, Lewis acid sites with a lower electron-accepting ability appear, as attributed to pentacoordinated aluminum. The numerical values of the surface densities of all chemically active sites have been estimated after annealing at 420 and 700 K. We were surprised to observe that gaseous nitrogen can occupy Lewis acid sites and hinder the interaction of the aluminum with any other electron donor. As a result, aluminated surfaces saturated with nitrogen do not exhibit any Brønsted or Lewis acidity. At room temperature, it takes days before pyridine replaces nitrogen at the Lewis acid sites.

Solid-state nuclear magnetic resonance investigations of the nature, property, and activity of acid sites on solid catalysts

Further progress in the field of heterogeneous catalysis depends on our knowledge of the nature and behavior of surface sites on solid catalysts and of the mechanisms of chemical reactions catalyzed by these materials. In the past decades, solid-state NMR spectroscopy has been developed to an important tool for routine characterization of solid catalysts. The present work gives a review on experimental approaches and applications of solid-state NMR spectroscopy for investigating Brønsted and Lewis sites on solid acids. Studies focusing on the generation of surface sites via post-synthesis modification routes of microporous and mesoporous materials support the development of new and the improvement of existing catalyst systems. High-temperature and flow techniques of in situ solid-state NMR spectroscopy allow a deeper insight into the mechanisms of heterogeneously catalyzed reactions and open the way for studying the activity of acidic surface sites. They help to clarify the activation of reactants on Brønsted and Lewis acid sites and improve our understanding of mechanisms affecting the selectivity of acid-catalyzed reactions.

Dry-Gel Synthesis of Mesoporous MCM-41 Materials with Modified Pore Structure

For the first time, the dry-gel conversion method was applied for the preparation of MCM-41 materials with partially crystalline framework. The X-ray diffraction pattern of the material obtained after a dry-gel conversion time of 36 h consists of reflections of both long-range ordered MCM-41 material and zeolite ZSM-5. The nitrogen adsorption/desorption isotherm confirms the presence of micropores and uniform mesopores with a narrow pore size distribution. By 29Si MAS NMR spectroscopy it was evidenced that a significant portion of the amorphous MCM-41 framework was transformed into a partially crystalline framework. TEM and SEM images indicate the occurrence of mesopores with disturbed arrangements, but no formation of separate zeolite ZSM-5 crystals occurred. By 1H MAS NMR spectroscopy of the above-mentioned material, the formation of hydroxyl groups with a chemical shift of ca. 4 ppm and a concentration of ca. 0.1 mmol/g was observed. The acid strength of these hydroxyl groups, as studied by adsorption of the 13C MAS NMR probe molecule 13C-2-acetone, was found to agree with that of bridging OH groups in zeolite H-ZSM-5. After conversion times of 48 h and 72 h, an extensive to total transformation of the dry gel into zeolite ZSM-5 occurred.

Effect of Aluminum on the Nature of the Iron Species in Fe-SBA-15

We report the preparation of highly ordered mesoporous Fe-Al-SBA-15 with isolated extraframework Fe species under acidic conditions. The materials were characterized by means of UV resonance Raman spectroscopy, in conjunction with BET, XRD, TEM, UV-vis, H2-TPR, FT-IR, and 27Al MAS NMR spectroscopy. The addition of both Fe and Al to the synthesis gel of SBA-15 results in the formation of isolated extraframework Fe species located close to the framework Al ions and the Fe content an order of magnitude higher than that in Fe-SBA-15 synthesized without Al. The existence of anchored extraframework Fe species was confirmed by the presence of a strong absorption band at 270 nm, hydrogen reduction at relatively low temperature, and the presence of a resonance Raman band at 1140 cm(-1). The location of Fe in close proximity to framework Al nuclei is further supported by 27Al MAS NMR measurements. Two characteristic UV Raman bands at 510 cm(-1) and 1090 cm(-1) excited by 244-nm laser are assigned to Fe-O-Si symmetric and asymmetric stretching modes of isolated tetrahedral Fe ions in the silica framework for Fe-SBA-15. The resonance Raman band at 1140 cm(-1) excited by 325-nm laser is attributed to the asymmetric stretching mode of the isolated extraframework iron species in Fe-Al-SBA-15. The isolated Fe species close to framework Al species are stable in acidic HCl solution, whereas the majority of Fe species in Fe-SBA-15 can be easily removed.