An in Situ Scanning Tunneling Microscopy and Cyclic Voltammetric Study of Iodobenzene and Iodoheptane Molecules Adsorbed on a Pt(111) Electrode

Potential energy landscape of monolayer-surface systems governed by repulsive lateral interactions: the case of (3 x 3)-I-Pt(111)

Combined density functional theory (DFT) and Monte Carlo (MC) approach is applied to study the potential energy landscape of four iodine atoms adsorbed on the Pt(111) surface in a (3 x 3) unit cell. Three critical points were identified: (3 x 3)-sym and (3 x 3)-asym, corresponding to structures well known from experimental studies, while the third one (3 x 3)-zigzag is a new structure not reported before. An interaction model fitted to DFT calculations allows us to explain the difference between arrangements of iodine monolayer in vacuum, air, and solution environments as a result of different repulsion regimes.

In situ scanning tunneling microscopy of 1,6-hexanedithiol, 1,9-nonanedithiol, 1,2-benzenedithiol, and 1,3-benzenedithiol adsorbed on pt(111) electrodes

Cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM) were used to examine four dithiol molecules, including 1,6-hexanedithiol, 1,9-nonanedithiol, 1,2-benzenedithiol, and 1,3-benzenedithiol, adsorbed on well-ordered Pt(111) electrodes in 0.1 M HClO(4). The open-circuit potential (OCP) of Pt(111) electrodes decreased substantially from 0.95 to 0.3 V (versus reversible hydrogen electrode) upon the adsorption of dithol molecules, which indicates that these adsorbates injected electrons into the Pt electrode. For all dithiol molecules, ordered adlattices of p(2 x 2) and (square root 3 x square root 3)R30 degrees were formed when the dosing concentration was lower than 150 microM and the potential of Pt(111) was more negative than 0.5 V. Raising the potential of Pt(111) from 0.1 to 0.4 V or more positive values could transform p(2 x 2) to (square root 3 x square root 3)R30 degrees before it turned disarray. The insensitivity of the structure of dithiol adlayers with their chemical structures was explained by upright molecular orientation with the formation of one Pt-S bond per dithiol molecule. This molecular orientation was independent of the coverage of dithiol molecules, as nucleation seeds produced at the beginning of adsorption were also constructed with p(2 x 2). The triangular-shaped STM molecular resolution suggested 3-fold binding of sulfur headgroup on Pt(111). All dithiols were adsorbed so strongly on Pt(111) electrodes that switching the potential negatively to the onset of hydrogen evolution in 0.1 M HClO(4) or water reduction in 1 M KOH could not displace dithiol admolecules.

Adsorption of formaldehyde on Pt(111) and Pt(100) electrodes: cyclic voltammetry and scanning tunneling microscopy

The adsorption of formaldehyde (HCHO) on Pt(111) and Pt(100) electrodes was examined by cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM) in 0.1 M HClO(4). The extent of HCHO adsorption at both Pt electrodes was evaluated by comparing the CVs, particularly for the hydrogen adsorption and desorption between 0.05 and 0.4 V, obtained in 0.1 M HClO(4) with and without HCHO. The adsorption of HCHO on these Pt electrodes was significant only when [HCHO] >/= 10 mM. Adsorbed organic intermediate species acted as poisons, blocking Pt surfaces and causing delays in the oxidation of HCHO. Compared to Pt(111), Pt(100) was more prone to poisoning, as indicated by a 200 mV positive shift of the onset of HCHO oxidation. However, Pt(100) exhibited an activity 3 times higher than that of Pt(111), as indicated by the difference in peak current density of HCHO oxidation. Molecular resolution STM revealed highly ordered structures of Pt(111)-( radical7 x radical7)R19.1 degrees and Pt(100)-( radical2 x radical2) in the potential region between 0.1 and 0.3 V. Voltammetric measurements further showed that the organic poisons produced by HCHO adsorption behaved differently from the intentionally dosed CO admolecules, which supports the assumption for the formation of HCO or COH adspecies, rather than CO, as the poison. On both Pt electrodes, HCHO oxidation commenced preferentially at step sites at the onset potential of this reaction, but it occurred uniformly at the peak potentials.

In-situ scanning tunneling microscopy of carbon monoxide adsorbed on Au(111) electrode

In-situ scanning tunneling microscopy (STM) coupled with cyclic voltammetry was used to examine the adsorption of carbon monoxide (CO) molecules on an ordered Au(111) electrode in 0.1 M HClO4. Molecular resolution STM revealed the formation of several commensurate CO adlattices, but the (9 x radical 3) structure eventually prevailed with time. The CO adlayer was completely electrooxidized to CO2 at 0.9 V versus RHE in CO-free 0.1 M HClO(4), as indicated by a broad and irreversible anodic peak which appeared at this potential in a positive potential sweep from 0.05 to 1.6 V. A maximal coverage of 0.3 was estimated for CO admolecules from the amount of charge involved in this feature. Real-time in-situ STM imaging allowed direct visualization of the adsorption process of CO on Au(111) at 0.1 V, showing the lifting of (radical 3 x 22) reconstruction of Au(111) and the formation of ordered CO adlattices. The (9 x radical 3) structure observed in CO-saturated perchloric acid has a coverage of 0.28, which is approximately equal to that determined from coulometry. Switching the potential from 0.1 to -0.1 V restored the reconstructed Au(111) with no change in the (9 x radical 3)-CO adlattice. However, the reconstructed Au(111) featured a pairwise corrugation pattern with two nearest pairs separated by 74 +/- 1 A, corresponding to a 14% increase from the ideal value of 65.6 A known for the ( radical 3 x 22) reconstruction. Molecular resolution STM further revealed that protrusions resulting from CO admolecules in the (9 x radical 3) structure exhibited distinctly different corrugation heights, suggesting that the CO molecules resided at different sites on Au(111). This ordered structure predominated in the potential range between 0.1 and 0.7 V; however, it was converted into new structures of (7 x radical 7) and ( radical 43 x 2 radical 13) on the unreconstructed Au(111) when the potential was held at 0.8 V for ca. 60 min. The coverage of CO adlayer decreased accordingly from 0.28 to 0.13 before it was completely removed from the Au(111) surface at more positive potentials.

Elucidation of the deposition processes and spatial structures of alkanethiol and arylthiol molecules adsorbed on Pt111 electrodes with in situ scanning tunneling microscopy

In situ scanning tunneling microscopy (STM) was used to examine the spatial structures of n-alkane thiols (1-hexanethiol, 1-nonanethiol, and 1-octahexanethiol) and arylthiols (benzenethiol and 4-hydroxybenzenethiol) adsorbed on well-ordered Pt111 electrodes in 0.1 M HClO4. The electrochemical potential and molecular flux were found to be the dominant factors in determining the growth mechanisms, final coverages, and spatial structures of these organic adlayers. Depending on the concentrations of the thiols, deposition of self-assembled monolayers (SAMs) followed either the nucleation-and-growth mechanism or the random fill-in mechanism. Low and high thiol concentrations respectively produced two ordered structures, (2 x 2) and (square root of 3 x square root of 3)R30 degrees , between 0.05 and 0.3 V. On average, an ordered domain spanned 500 A when the SAMs were made at 0.15 V, but this dimension shrank substantially once the potential was raised above 0.3 V. This potential-induced order-to-disorder phase transition resulted from a continuous deposition of thiols, preferentially at domain boundaries of (square root of 3 x square root of 3 x )R30 degrees arrays. All molecular adlayers were completely disordered by 0.6 V, and this restructuring event was irreversible with potential modulation. Since all thiols were arranged in a manner similar to that adopted by sulfur adatoms (Sung et al. J. Am. Chem. Soc. 1997, 119, 194), it is likely that they were adsorbed mainly through their sulfur headgroups in a tilted configuration, irrespective of the coverage. Both the sulfur and phenyl groups of benzenethiol admolecules gave rise to features with different corrugation heights in the molecular-resolution STM images. All thiols were adsorbed strongly enough that they remained intact at a potential as negative as -1.0 V in 0.1 M KOH.