One- and Two-Photon Spectroscopy of Donor−Acceptor−Donor Distyrylbenzene Derivatives: Effect of Cyano Substitution and Distortion from Planarity

Enhancing Photothermal Energy Transduction through Inter- and Intramolecular Interactions of Multiple Two-Photon Dyes Appended onto Calix[4]arene

Organic dyes-based photothermal agents (OPTAs) have received increasing attention as alternative to inorganic materials due to their higher biocompatibility and extensive diversification. Maximizing nonradiative deexcitation channels is crucial to improve the photothermal conversion efficiency (PCE) of OPTAs. This is typically achieved through individual molecular design or collective enhancement using supramolecular strategies. Furthermore, photothermal therapy (PTT) generally relies on linear one-photon absorption of the light source by the OPTA, with less consideration given to nonlinear two-photon absorption (2PA) strategies, despite their potential benefits. Here, a synergistic strategy, which combines intramolecular and intermolecular quenching, is employed to maximize the photothermal efficiency of diphenylamino-substituted distyryl dicyanobenzene (DSB), an outstanding two-photon-absorbing chromophore. One to three DSB units have been introduced on the conic p-tert-butyl-calix[4]arene (CX), serving as a preorganizing platform to allow aggregate formation and promote intramolecular quenching within the multichromophoric systems. Importantly, the multichromophoric molecules had very high two-photon absorption capabilities with cross sections (δ2PA) reaching maximal values of 3290 GM at 810 nm. Experimental data accompanied by large-scale molecular dynamics simulations and time-dependent density functional theory calculations shed light onto the interaction mechanism in those multiple DSB-appended CX compounds to rationalize their optical properties. Then, the formulation with Pluronic F127 amphiphile yields water-dispersible nanoprecipitates (Nps), in which the PCE is further maximized and the photobleaching is reduced due to the combination of intra- and intermolecular quenching. The high two-photon absorption in the near-infrared (NIR) window associated with the high PCE of these nanosized OPTAs could serve as a basis to future in vivo 2P-PTT applications.

Near-Infrared Light-Driven Photocatalysis with an Emphasis on Two-Photon Excitation: Concepts, Materials, and Applications

Efficient utilization of sunlight in photocatalysis is widely recognized as a promising solution for addressing the growing energy demand and environmental issues resulting from fossil fuel consumption. Recently, there have been significant developments in various near-infrared (NIR) light-harvesting systems for artificial photosynthesis and photocatalytic environmental remediation. This review provides an overview of the most recent advancements in the utilization of NIR light through the creation of novel nanostructured materials and molecular photosensitizers, as well as modulating strategies to enhance the photocatalytic processes. A special focus is given to the emerging two-photon excitation NIR photocatalysis. The unique features and limitations of different systems are critically evaluated. In particular, it highlights the advantages of utilizing NIR light and two-photon excitation compared to UV-visible irradiation and one-photon excitation. Ongoing challenges and potential solutions for the future exploration of NIR light-responsive materials are also discussed.

Insights into chalcone analogues with potential as antioxidant additives in diesel-biodiesel blends

Biodiesel production is one of the promising strategies to reduce diesel consumption and an important contribution to climate change. However, biodiesel stability remains a challenging problem in biofuel use in the global energy matrix. In this context, organic additives have been investigated to minimize these problems and reduce harmful emissions to comply with fuel requirement standards. In this study, we discuss a comprehensive structural description, a behavior of B15 [85% volume of diesel and 15% volume of biodiesel (B100)] stability in the presence of antioxidants (chalcone analogues), and a theoretical calculation to pave the way for clarifying and expanding the potential of title compounds as an antioxidant additive for diesel-biodiesel blends. Finally, a systematic description of the oxidation stability was undertaken using a specialized machine learning computational pySIRC platform.

The appeal of small molecules for practical nonlinear optics

Small organic molecules with a π-conjugated system that consists of only a few double or triple bonds can have significantly smaller optical excitation energies when equipped with donor- and acceptor groups, which raises the quantum limits to the molecular polarizabilities. As a consequence, third-order nonlinear optical polarizabilities become orders of magnitude larger than those of molecules of similar size without donor-acceptor substitution. This  enables strong third-order nonlinear optical effects (as high as 1000 times those of silica glass) in dense, amorphous monolithic assemblies. These properties, accompanied by the possibility of deposition from the vapor phase and of electric-field poling at higher temperatures, make the resulting materials competitive towards adding an active nonlinear optical or electro-optic functionality to state-of-the-art integrated photonics platforms.

Near-infrared dyes for two-photon absorption in the short-wavelength infrared: strategies towards optical power limiting

The recent advances in the field of two-photon absorbing chromophores in the short-wavelength infrared spectral range (SWIR 1100–2500 nm) are summarized, highlighting the development of optical power limiting devices in this spectral range.

Activating intramolecular singlet exciton fission by altering π-bridge flexibility in perylene diimide trimers for organic solar cells

In this study, two analogous perylene diimide (PDI) trimers, whose structures show rotatable single bond π-bridge connection (twisted) vs. rigid/fused π-bridge connection (planar), were synthesized and investigated. We show via time resolved spectroscopic measurements how the π-bridge connections in A-π-D-π-A-π-D-π-A multichromophoric PDI systems strongly affect the triplet yield and triplet formation rate. In the planar compound, with stronger intramolecular charge transfer (ICT) character, triplet formation occurs via conventional intersystem crossing. However, clear evidence of efficient and fast intramolecular singlet exciton fission (iSEF) is observed in the twisted trimer compound with weaker ICT character. Multiexciton triplet generation and separation occur in the twisted (flexible-bridged) PDI trimer, where weak coupling among the units is observed as a result of the degenerate double triplet and quintet states, obtained by quantum chemical calculations. The high triplet yield and fast iSEF observed in the twisted compound are due not only to enthalpic viability but also to the significant entropic gain allowed by its trimeric structure. Our results represent a significant step forward in structure-property understanding, and may direct the design of new efficient iSEF materials.

Fluorescence enhancement of small squaraine dye and its two-photon excited fluorescence in long-term near-infrared I&II bioimaging

Two-photon excited fluorescence (TPEF) plays an important role in bioimaging, the longer excitation wavelength improves its imaging depths, which gives us deeper biological information. Here, we reported the two-photon absorption of a small squaraine dye (SD), and we found that the TPEF of the small SD can be enhanced significantly using albumin, the TPEF of SD in water was enhanced 17.7 times by adding bull serum albumin (BSA) in the solution. Meanwhile, the cell imaging results indicated that the SD can enter cell effectively in less than 30 min and emit bright TPEF. Furthermore, the SD showed excellent stability against photobleaching in near-infrared II (1200 nm). The cytotoxicity experiment showed that the cytotoxicity of SD is relatively low. Our work demonstrates the excellent two-photon effect of SD in cells, potential application value of SD in two-photon bioimaging, protein detection and near infrared sensing.

Electron-Transfer Ionization of Nanoparticles, Polymers, Porphyrins, and Fullerenes Using Synthetically Tunable α-Cyanophenylenevinylenes as UV MALDI-MS Matrices

Electron-transfer ionization in matrix-assisted laser desorption/ionization (ET-MALDI) is widely used for the analysis of functional materials that are labile, unstable, and reactive in nature. However, conventional ET matrices (e.g., trans-2-[3-(4- tert-butylphenyl)-2-methyl-2-propenylidene] malononitrile (DCTB)) still lack in performance due to cluster formation, reactivity with analytes, and vacuum instability. In this contribution, we report the use of α-cyanophenylenevinylene derivatives as UV MALDI matrices for the analysis, by ET ionization, of nanoparticles, polymers, porphyrins, and fullerenes. The synthetic versatility of the phenylenevinylene (PV) core allowed us to modulate physicochemical properties, fundamental for efficient formation of primary ions in the gas phase under MALDI conditions, such as planarity, ionization potentials, molar absorptivity, and laser thresholds. For instance, introduction of -CN groups in vinyl positions of the PV core induced structural disruption in planarity in the new α-CNPV derivatives, shifting their maximum molar absorptivity to UV wavelengths and increasing their ionization energy values above 8.0 eV. UV MALDI-relevant photophysical properties in solution and solid state are reported (λ_max and ε_355nm). LDI spectra of α-CNPVs exhibit predominant signals due to M^+• and [M + H]⁺ species, whereas the standard matrix DCTB shows peaks associated with clusters and nondesirable products. The mass spectrometry (MS) performance of six α-CNPV derivatives was assessed for the ionization of a standard compound, with α-CNPV-CH₃ and α-CNPV-OCH₃ exhibiting better analytical figures of merit than those of a standard matrix (DCTB). These new matrices display high vacuum stability (79%) for up to 240 min of residence in the ionization source, in contrast with DCTB with 13%. Vacuum stability is vital, particularly for applications such as high-throughput analysis and imaging MS. In addition, when a mixture of 20 analytes (PAHs, porphyrins, and triphenylamine dyes) ranging from m/z 300 to 1700 was analyzed via ET-MALDI, we observed analyte coverage of 90% with the α-CNPV-CH₃ derivative, whereas DCTB afforded only 70%. Finally, α-CNPV-CH₃ was tested and compared with DCTB, as ET-MALDI matrix for petroporphyrins, conjugated polymers, gold nanoparticles, and fullerene derivatives analysis, outperforming in most cases the standard matrix.

Two-photon probes for in vivo multicolor microscopy of the structure and signals of brain cells

Imaging the brain of living laboratory animals at a microscopic scale can be achieved by two-photon microscopy thanks to the high penetrability and low phototoxicity of the excitation wavelengths used. However, knowledge of the two-photon spectral properties of the myriad fluorescent probes is generally scarce and, for many, non-existent. In addition, the use of different measurement units in published reports further hinders the design of a comprehensive imaging experiment. In this review, we compile and homogenize the two-photon spectral properties of 280 fluorescent probes. We provide practical data, including the wavelengths for optimal two-photon excitation, the peak values of two-photon action cross section or molecular brightness, and the emission ranges. Beyond the spectroscopic description of these fluorophores, we discuss their binding to biological targets. This specificity allows in vivo imaging of cells, their processes, and even organelles and other subcellular structures in the brain. In addition to probes that monitor endogenous cell metabolism, studies of healthy and diseased brain benefit from the specific binding of certain probes to pathology-specific features, ranging from amyloid-β plaques to the autofluorescence of certain antibiotics. A special focus is placed on functional in vivo imaging using two-photon probes that sense specific ions or membrane potential, and that may be combined with optogenetic actuators. Being closely linked to their use, we examine the different routes of intravital delivery of these fluorescent probes according to the target. Finally, we discuss different approaches, strategies, and prerequisites for two-photon multicolor experiments in the brains of living laboratory animals.

Aggregates of quadrupolar dyes for two-photon absorption: the role of intermolecular interactions

We present a theoretical investigation of small aggregates of quadrupolar (A-π-D-π-A or D-π-A-π-D) charge-transfer dyes, with attention focused on the role of intermolecular interactions in determining their optical properties. We tackle the theoretical issue by adopting essential-state models (ESMs), which describe an isolated molecule in terms of a minimal number of electronic states, corresponding to the resonance structures. ESMs quite naturally describe intermolecular interactions relaxing the dipolar approximation and accounting for molecular polarizabilities. The approach is applied to curcuminoid and squaraine dyes, two families of chromophores with weak and strong quadrupolar character, respectively. The method is validated against experiment and for curcuminoids also against time-dependent density functional theory. ESMs rationalize the strong ultra-excitonic effects recurrently observed in the experimental optical spectra of aggregates of highly polarizable quadrupolar dyes, offering a valuable tool to exploit the supramolecular design of material properties.

A combined theoretical and experimental investigation on the influence of the bromine substitution pattern on the photophysics of conjugated organic chromophores

Two-photon photosensitizers with heavy atom substituents were synthesized and evaluated through a combined photophysical and computational study.

Symmetry Breaking in Pyrrolo[3,2-b]pyrroles: Synthesis, Solvatofluorochromism and Two-photon Absorption

Five centrosymmetric and one dipolar pyrrolo[3,2-b]pyrroles, possessing either two or one strongly electron-withdrawing nitro group have been synthesized in a straightforward manner from simple building blocks. For the symmetric compounds, the nitroaryl groups induced spontaneous breaking of inversion symmetry in the excited state, thereby leading to large solvatofluorochromism. To study the origin of this effect, the series employed peripheral structural motifs that control the degree of conjugation via altering of dihedral angle between the 4-nitrophenyl moiety and the electron-rich core. We observed that for compounds with a larger dihedral angle, the fluorescence quantum yield decreased quickly when exposed to even moderately polar solvents. Reducing the dihedral angle (i.e., placing the nitrobenzene moiety in the same plane as the rest of the molecule) moderated the dependence on solvent polarity so that the dye exhibited significant emission, even in THF. To investigate at what stage the symmetry breaking occurs, we measured two-photon absorption (2PA) spectra and 2PA cross-sections (σ_2PA ) for all six compounds. The 2PA transition profile of the dipolar pyrrolo[3,2-b]pyrrole, followed the corresponding one-photon absorption (1PA) spectrum, which provided an estimate of the change of the permanent electric dipole upon transition, ≈18 D. The nominally symmetric compounds displayed an allowed 2PA transition in the wavelength range of 700-900 nm. The expansion via a triple bond resulted in the largest peak value, σ_2PA =770 GM, whereas altering the dihedral angle had no effect other than reducing the peak value two- or even three-fold. In the S₀ →S₁ transition region, the symmetric structures also showed a partial overlap between 2PA and 1PA transitions in the long-wavelength wing of the band, from which a tentative, relatively small dipole moment change, 2-7 D, was deduced, thus suggesting that some small symmetry breaking may be possible in the ground state, even before major symmetry breaking occurs in the excited state.

Organic nanostructure-based probes for two-photon imaging of mitochondria and microbes with emission between 430 nm and 640 nm

Multi-photon excitation and versatile fluorescent probes are in high need for biological imaging, since one probe can satisfy many needs as a biosensor. Herein we synthesize a series of two-photon excited probes based on tetraphenylethene (TPE) structures (TPE-Acr, TPE-Py, and TPE-Quino), which can image both mammalian cells and bacteria based on aggregation-induced emission (AIE) without washing them. Because of cationic moieties, the fluorescent molecules can aggregate into nanoscale fluorescent organic nanoscale dots to image mitochondria and bacteria with tunable emissions using both one-photon and two-photon excitation. Our research demonstrates that these AIE-dots expand the functions of luminescent organic dots to construct efficient fluorescent sensors applicable to both one-photon and two-photon excitation for bio-imaging of bacteria and mammalian cells.

Self-Assembly of Electron Donor-Acceptor-Based Carbazole Derivatives: Novel Fluorescent Organic Nanoprobes for Both One- and Two-Photon Cellular Imaging

In this study, we report fluorescent organic nanoprobes with intense blue, green, and orange-red emissions prepared by self-assembling three carbazole derivatives into nanorods/nanoparticles. The three compounds consist of two or four electron-donating carbazole groups linked to a central dicyanobenzene electron acceptor. Steric hindrance from the carbazole groups leads to noncoplanar 3D molecular structures favorable to fluorescence in the solid state, while the donor-acceptor structures endow the molecules with good two-photon excited emission properties. The fluorescent organic nanoprobes exhibit good water dispersibility, low cytotoxicity, superior resistance against photodegradation and photobleaching. Both one- and two-photon fluorescent imaging were shown in the A549 cell line. Two-photon fluorescence imaging with the fluorescent probes was demonstrated to be more effective in visualizing and distinguishing cellular details compared to conventional one-photon fluorescence imaging.

Calcium Uncaging with Visible Light

We have designed a nitroaromatic photochemical protecting group that absorbs visible light in the violet-blue range. The chromophore is a dinitro derivative of bisstyrylthiophene (or BIST) that absorbs light very effectively (ε440 = 66,000 M(-1) cm(-1) and two-photon cross section of 350 GM at 775 nm). We developed a "caged calcium" molecule by conjugation of BIST to a Ca(2+) chelator that upon laser flash photolysis rapidly releases Ca(2+) in <0.2 ms. Using the patch-clamp method the optical probe, loaded with Ca(2+), was delivered into acutely isolated mouse cardiac myocytes, where either one- and two-photon uncaging of Ca(2+) induced highly local or cell-wide physiological Ca(2+) signaling events.

Theoretical investigation and design of two-photon fluorescent probes for visualizing β-galactosidase activity in living cells

The two-photon fluorescent probes show dual signal for β-gal bio-imaging.

Significant Improvement of Optoelectronic and Photovoltaic Properties by Incorporating Thiophene in a Solution-Processable D-A-D Modular Chromophore

Through the incorporation of a thiophene functionality, a novel solution-processable small organic chromophore was designed, synthesized and characterized for application in bulk-heterojunction solar cells. The new chromophore, (2Z,2′Z)-2,2′-(1,4-phenylene)bis(3-(5-(4-(diphenylamino)phenyl)thiophen-2-yl)acrylonitrile) (coded as AS2), was based on a donor–acceptor–donor (D–A–D) module where a simple triphenylamine unit served as an electron donor, 1,4-phenylenediacetonitrile as an electron acceptor, and a thiophene ring as the π-bridge embedded between the donor and acceptor functionalities. AS2 was isolated as brick-red, needle-shaped crystals, and was fully characterized by ¹H- and ¹³C-NMR, IR, mass spectrometry and single crystal X-ray diffraction. The optoelectronic and photovoltaic properties of AS2 were compared with those of a structural analogue, (2Z,2′Z)-2,2′-(1,4-phenylene)bis(3-(4-(diphenylamino)phenyl)-acrylonitrile) (AS1). Benefiting from the covalent thiophene bridges, compared to AS1 thin solid film, the AS2 film showed: (1) an enhancement of light-harvesting ability by 20%; (2) an increase in wavelength of the longest wavelength absorption maximum (497 nm vs. 470 nm) and (3) a narrower optical band-gap (1.93 eV vs. 2.17 eV). Studies on the photovoltaic properties revealed that the best AS2-[6,6]-phenyl-C₆₁-butyric acid methyl ester (PC₆₁BM)-based device showed an impressive enhanced power conversion efficiency of 4.10%, an approx. 3-fold increase with respect to the efficiency of the best AS1-based device (1.23%). These results clearly indicated that embodiment of thiophene functionality extended the molecular conjugation, thus enhancing the light-harvesting ability and short-circuit current density, while further improving the bulk-heterojunction device performance. To our knowledge, AS2 is the first example in the literature where a thiophene unit has been used in conjunction with a 1,4-phenylenediacetonitrile accepting functionality to extend the π-conjugation in a given D–A–D motif for bulk-heterojunction solar cell applications.

Red-emitting DPSB-based conjugated polymer nanoparticles with high two-photon brightness for cell membrane imaging

New red-emitting conjugated polymers have been successfully synthesized by incorporating classical two-photon absorption (TPA) units, electron-rich units, and a small amount of electron-deficient units along the polymer backbones. Water-dispersible nanoparticles (NPs) based on these polymers were also fabricated for applications in two-photon excitation fluorescence imaging of cell membrane. Through optimization of the polymer/matrix mass ratio and the initial feed concentration of the polymer solution, a high quantum yield (QY) of 24% was achieved for the red-emitting NPs in water. TPA cross section and two-photon action cross section values of these polymers at 750 nm reached up to 1000 GM and 190 GM per repeat unit in aqueous media, 2.5 × 10(5) GM and 4.7 × 10(4) GM per NP, respectively. Furthermore, these NPs displayed excellent photostability and biocompatibility. Their applications as two-photon excitation fluorescence probes for cell membrane imaging have been demonstrated in three different cell lines with excellent imaging contrast. These results demonstrated that these polymer NPs hold great potentials as excellent two-photon excitation fluorescence probes in various biological applications.

Multiphoton excited fluorescent materials for frequency upconversion emission and fluorescent probes

Recent progress in developing various strategies for exploiting efficient MPA fluorophores for two emerging technological MPA applications including frequency upconversion photoluminescence and lasing as well as 2PA fluorescence bioimaging and biosensing are presented. An intriguing application of MPA frequency-upconverted lasing offers opportunity for the fabrication of high-energy coherent light sources in the blue region which could create new advantages and breakthroughs in various laser-based applications. In addition, multiphoton excitation has led to considerable progress in the development of advanced diagnostic and therapeutic treatments; further advancement is anticipated with the emergence of various versatile 2PA fluorescence probes. It is widely appreciated that the two-photon excitation offers significant advantages for the biological fluorescence imaging and sensing which includes higher spatial resolution, less photobleaching and photodamage as well as deeper tissue penetration as compared to the one-photon excited microscopy. To be practically useful, the 2PA fluorescent probes for biological applications are required to have a site-specificity, a high fluorescence quantum yield, proper two-photon excitation and subsequent emission wavelengths, good photodecomposition stability, water solubility, and biocompatibility besides large 2PA action cross-sections.

25th anniversary article: Design of polymethine dyes for all-optical switching applications: guidance from theoretical and computational studies

All-optical switching--controlling light with light--has the potential to meet the ever-increasing demand for data transmission bandwidth. The development of organic π-conjugated molecular materials with the requisite properties for all-optical switching applications has long proven to be a significant challenge. However, recent advances demonstrate that polymethine dyes have the potential to meet the necessary requirements. In this review, we explore the theoretical underpinnings that guide the design of π-conjugated materials for all-optical switching applications. We underline, from a computational chemistry standpoint, the relationships among chemical structure, electronic structure, and optical properties that make polymethines such promising materials.

The effect of the supramolecular network of (Z)-3-(4-(diphenylamino)phenyl)-2-(pyridin-2-yl)-acrylonitrile on the fluorescence behavior of a single crystal: experimental and theoretical studies

The molecular structure, molecular interactions, self-assembly behaviour and optical properties of a α,β-unsaturated nitrile were analyzed.

Oxygen-dependent photochemistry and photophysics of "miniSOG," a protein-encased flavin

Selected photochemical and photophysical parameters of flavin mononucleotide (FMN) have been examined under conditions in which FMN is (1) solvated in a buffered aqueous solution, and (2) encased in a protein likewise solvated in a buffered aqueous solution. The latter was achieved using the so-called "mini Singlet Oxygen Generator" (miniSOG), an FMN-containing flavoprotein engineered from Arabidopsis thaliana phototropin 2. Although FMN is a reasonably good singlet oxygen photosensitizer in bulk water (ϕΔ = 0.65 ± 0.04), enclosing FMN in this protein facilitates photoinitiated electron-transfer reactions (Type-I chemistry) at the expense of photosensitized singlet oxygen production (Type-II chemistry) and results in a comparatively poor yield of singlet oxygen (ϕΔ = 0.030 ± 0.002). This observation on the effect of the local environment surrounding FMN is supported by a host of spectroscopic and chemical trapping experiments. The results of this study not only elucidate the behavior of miniSOG but also provide useful information for the further development of well-characterized chromophores suitable for use as intracellular sensitizers in mechanistic studies of reactive oxygen species.

Theoretical and experimental spectroscopic analysis of cyano-substituted styrylpyridine compounds

A combined theoretical and experimental study on the structure, infrared, UV-Vis and ¹H NMR data of trans-2-(m-cyanostyryl)pyridine, trans-2-[3-methyl-(m-cyanostyryl)] pyridine and trans-4-(m-cyanostyryl)pyridine is presented. The synthesis was carried out with an efficient Knoevenagel condensation using green chemistry conditions. Theoretical geometry optimizations and their IR spectra were carried out using the Density Functional Theory (DFT) in both gas and solution phases. For theoretical UV-Vis and ¹H NMR spectra, the Time-Dependent DFT (TD-DFT) and the Gauge-Including Atomic Orbital (GIAO) methods were used, respectively. The theoretical characterization matched the experimental measurements, showing a good correlation. The effect of cyano- and methyl-substituents, as well as of the N-atom position in the pyridine ring on the UV-Vis, IR and NMR spectra, was evaluated. The UV-Vis results showed no significant effect due to electron-withdrawing cyano- and electron-donating methyl-substituents. The N-atom position, however, caused a slight change in the maximum absorption wavelengths. The IR normal modes were assigned for the cyano- and methyl-groups. ¹H NMR spectra showed the typical doublet signals due to protons in the trans position of a double bond. The theoretical characterization was visibly useful to assign accurately the signals in IR and ¹H NMR spectra, as well as to identify the most probable conformation that could be present in the formation of the styrylpyridine-like compounds.

Light-harvesting ytterbium(III)-porphyrinate-BODIPY conjugates: synthesis, excitation-energy transfer, and two-photon-induced near-infrared-emission studies

Based on a donor-acceptor framework, several conjugates have been designed and prepared in which an electron-donor moiety, ytterbium(III) porphyrinate (YbPor), was linked through an ethynyl bridge to an electron-acceptor moiety, boron dipyrromethene (BODIPY). Photoluminescence studies demonstrated efficient energy transfer from the BODIPY moiety to the YbPor counterpart. When conjugated with the YbPor moiety, the BODIPY moiety served as an antenna to harvest the lower-energy visible light, subsequently transferring its energy to the YbPor counterpart, and, consequently, sensitizing the Yb(III) emission in the near-infrared (NIR) region with a quantum efficiency of up to 0.73% and a lifetime of around 40 μs. Moreover, these conjugates exhibited large two-photon-absorption cross-sections that ranged from 1048-2226 GM and strong two-photon-induced NIR emission.

THEORETICAL STUDY OF ONE- AND TWO-PHOTON ABSORPTION PROPERTIES FOR THREE SERIES OF DIPHENYLAMINE AND DIFLUORENYLAMINE SUBSTITUTED CONJUGATED COMPOUNDS

The one-photon (OPA) and two-photon (TPA) absorption properties of three series of symmetrically substituted quadrupolar compounds with structure of donor-π bridge-donor (D–π–D) were investigated by time-dependent density functional theory (TDDFT) based on the Hartree–Fock (HF)-optimized geometrical structures. These compounds were constructed with either phenyl or fluorenyl groups connected by vinylene unit as the central π-conjugated bridges and either diphenylamine or difluorenylamine groups as terminal electron donors. The calculated OPA spectra are dominated by two strong transitions which are attributed to the charge transfers from the donor groups to central conjugated chains. The OPA and TPA transition strength all increase with the extension of conjugated chain length in each series and the corresponding wavelength shifts red in general. The transition strength in either OPA or TPA process also increases from series one to series two or three by replacing the phenyl groups with fluorenyl groups. The intramolecular charge transfers make significant contributions to the TPA activity. According to the three-state model, the enhanced TPA activity comes from the enhancement of transition moment between states–states as conjugated chain increases.

Nonlinear optical properties for a class of hexa-peri-hexabenzocoronene chromophores: a computational investigation

The systematic investigation of the linear and nonlinear optical properties on such a class of hexa-peri-hexabenzocoronene (HBC) chromophores is of significance for rationally designing two-photon absorption (TPA) materials. The results indicate that increasing the strength of electron-donating or accepting terminal groups leads to bathochromic-shift of the absorption band and enhancement of the TPA cross section (δ(max)). For the molecules with fluorinated methylene and cyano substituents, replacement of a double bond by a triple bond in the conjugated linker produces the increase of δ(max), owing to the lower bond-length alternation and better rigidity of phenylene-ethynylene. In contrast, for the molecules with nitro groups, the similar replacement results in a slight decrease of δ(max) because N-HBC-E-NO2 has excellent planarity architecture and effective electronic coupling. The TPA spectra are red-shifted and the δ(max) values are enhanced as the number of branches increases. Thus, a solvatochromism effect has a positive influence on the TPA response of the nitryl compounds due to larger polarization of the nitro moiety. We have shed light on the linear relationship between the first hyperpolarizability and δ(max). These HBC derivatives hold potential as high-performance nonlinear optical materials.