Electron Transport in Self-Assembled Bipyridinium Multilayers

A tripodal [2]rotaxane on the surface of gold

Tripodal [2]rotaxane, 3, and the structurally related axle, 2, incorporating a viologen moiety, a crown ether, and three thiol anchoring groups have been synthesized. Analogous monopodal derivatives, 1, have also been prepared. Self-assembled monolayers of the above tripodal and monopodal systems on gold have been studied by cyclic voltammetry. It has been shown that a thiol anchoring group is required to attach the monopodal viologen 1 to the surface of gold and that the maximum surface coverage of 1 corresponds to 2.7 x 10(-10) mol.cm(-2). The adsorbed monopodal viologen 1 does not thread bis-p-phenylene-34-crown-10 ether, 6. However, the tripodal axle 2 adsorbed on the surface of gold threads the crown ether 6 to form a hetero [2]rotaxane. In the case of the tripodal axle 2, the surface coverage is 7 x 10(-11) mol.cm(-2), while for the tripodal [2]rotaxane 3 the surface coverage reaches 1.1 x 10(-10) mol.cm(-2).

Analysis of self-assembled monolayers on gold surfaces using direct analysis in real time mass spectrometry

Mass spectrometry was performed on self-assembled monolayers (SAMs) of dodecanethiol on gold using the new direct analysis in real time (DART) ionization technique. Observed peaks for the SAMs included monomers, dimers, and trimers of the SAM molecules, with the dimer and trimer relative peak heights enhanced as compared to the spectra for neat dodecanethiol. The possibility that the observed peaks were due to residual (noncovalently bonded) material on the surface was tested by attempting to observe residual dodecanol. No peaks corresponding to dodecanol were observed. These results indicate that DART is an excellent ionization method for the direct and unambiguous mass analysis of chemical species in self-assembled monolayers.

Use of UV−vis Reflection Spectroscopy for Determining the Organization of Viologen and Viologen Tetracyanoquinodimethanide Monolayers

UV-vis reflection spectroscopy has been used for proving in situ the organization of pure viologen and hybrid viologen tetracyanoquinodimethanide monolayers at the air-water interface. Other more classical measurements concerning Langmuir monolayers, including surface pressure-area and surface potential-area isotherms, are also provided. The organization of the viologen in the Langmuir monolayer was investigated upon the different states of compression, and the tilt angle of the viologen moieties with respect to the water surface was determined. A gradual transition of the viologen molecules from a flat orientation in the gas phase to a more tilted position with respect to the water surface in the condensed phases occurs. The addition of a tetracyanoquinodimethane (TCNQ) salt in the subphase leads to the penetration of TCNQ anions into the positively charged viologen monolayer forming a hybrid viologen tetracyanoquinodimethanide film where a charge-transfer interaction between the two moieties is observed. From a quantitative analysis of the reflection spectra, an organization model of these hybrid monolayers at the air-water interface is proposed, suggesting a parallel arrangement of viologen and TCNQ units with a 1:2 stoichiometry.

One-Electron Reduction of an “Extended Viologen” p-Phenylene-bis-4,4‘-(1-aryl-2,6-diphenylpyridinium) Dication

One-electron reduction of the "extended viologen" dication 1 yields the red cation radical 2, characterized by strong near-IR absorption. It has been generated and studied by pulse radiolytic, electrochemical, redox titration, UV-visible, and electron paramagnetic resonance spectroscopic methods. All results are in agreement with a fully delocalized electronic structure for 2.

Electrochemical Switching of Chromogenic Monolayers Self-Assembled on Transparent Platinum Electrodes

Transparent, ultrathin Pt electrodes permit the simultaneous electrochemical and spectroscopic investigation of self-assembled monolayers of electrochromic compounds. Voltage stimulations applied to the Pt substrate reversibly alter the redox state of the chemisorbed molecules and, hence, modulate the intensity of the light transmitted through the Pt/monolayer assembly.

Self-Assembling Bipyridinium Multilayers

The identification of strategies to assemble nanostructured films with engineered properties on solid supports can lead to the development of innovative functional materials. In particular, the self-assembly of electroactive multilayers from simple molecular building blocks on metallic electrodes can offer the opportunity to regulate the exchange of electrons between the underlying substrate and solution species. In this context, we designed an experimental protocol to prepare electroactive films from bipyridinium bisthiols. Specifically, we found that a compound incorporating two bipyridinium dications at its core and terminal thiol groups self-assembles into remarkably stable multilayers on polycrystalline gold. The surface coverage of the resulting films can be regulated by adjusting the exposure time of the gold substrate to the bipyridinium solution. Control experiments with appropriate model compounds demonstrate that both bipyridinium dications as well as both thiol groups must be present in the molecular skeleton to encourage multilayer growth. The resulting films transport electrons efficiently from the electrode surface to the film/solution interface. Indeed, they mediate the reduction of Ru(NH(3))(6)(3+) in the electrolyte solution but prevent the back oxidation of the resulting Ru(NH(3))(6)(2+). Furthermore, these polycationic bipyridinium films capture electrostatically Fe(CN)(6)(4-) tetraanions, which can also be exploited to transport electrons across the interfacial assembly. In fact, electrons can travel through the bipyridnium(2+/1+) couples to redox probes in solution and then back to the electrode through the Fe(CN)(6)(4/3-) couples. Thus, our original approach to self-assembling multilayers can produce stable electroactive films with unique electron transport properties, which can be regulated with a careful choice of the anionic components.

Length Dependence of Charge Transport in Nanoscopic Molecular Junctions Incorporating a Series of Rigid Thiol-Terminated Norbornylogs

Four tetrathiol-terminated norbornane homologues were synthesized and self-assembled monolayers (SAMs) of these molecules were formed on Au via adsorption from CH2Cl2. SAMs were characterized structurally via spectroscopic ellipsometry (SE), reflection-absorption infrared spectroscopy (RAIRS), Rutherford backscattering spectrometry (RBS), and X-ray photoelectron spectroscopy (XPS). Results of these analyses show that the rigid norbornylogs form monolayers that have a surface coverage slightly lower than that of alkanethiols, and that they exhibit a nonmonotonic dependence of film thickness on molecular length. Nanoscale molecular junctions incorporating these SAMs were formed and characterized electrically using conducting probe atomic force microscopy (CP-AFM). The resistances of these junctions scale exponentially with the contour length of the molecules, with beta = 0.9 A(-1), consistent with a nonresonant tunneling mechanism. Further, the resistance of norbornyl SAMs correlates well with the resistance of alkanedithiol SAMs of similar length, suggesting that the norbornyl molecules form sulfur-metal bonds on both ends of the junction.

Electron transport in bipyridinium films

Bipyridinium dications are versatile building blocks for the assembly of functional materials. In particular, their reliable electrochemical response has encouraged the design of electroactive films. Diverse and elegant experimental strategies to coat metallic and semiconducting electrodes with bipyridinium compounds have, in fact, emerged over the past two decades. The resulting interfacial assemblies span from a few nanometers to several micrometers in thickness. They incorporate from a single molecular layer to large collections of entangled polymer chains. They transport electrons efficiently from the electrode surface to the film/solution interface and vice versa. Electron self-exchange between and the physical diffusion of the bipyridinium building blocks conspire in defining the charge transport properties of these fascinating electroactive assemblies. Often, the matrix of electron-deficient bipyridinium dications can be exploited to entrap electron-rich analytes. Electrostatic interactions promote the supramolecular association of the guests with the surface-confined host matrix. Furthermore, chromophoric sites can be coupled to the bipyridinium dications to produce photosensitive arrays capable of harvesting light and generating current. Thus, thorough investigations on the fundamental properties of these functional molecule-based materials can lead to promising applications in electroanalysis and solar energy conversion, while contributing to advances in the basic understanding of electron transport in interfacial assemblies.