Enhancement of the Large Stokes-Shifted Fluorescence Emission from the 2-(2‘-Hydroxyphenyl)benzoxazole Core in a Dendrimer

Investigation of Excited-State Intramolecular Proton Transfer and Structural Dynamics in Bis-Benzimidazole Derivative (BBM)

The bis-benzimidazole derivative (BBM) molecule, consisting of two 2-(2'-hydroxyphenyl) benzimidazole (HBI) halves, has been synthesized and successfully utilized as a ratiometric fluorescence sensor for the sensitive detection of Cu²⁺ based on enol-keto excited-state intramolecular proton transfer (ESIPT). In this study, we strategically implement femtosecond stimulated Raman spectroscopy and several time-resolved electronic spectroscopies, aided by quantum chemical calculations to investigate the detailed primary photodynamics of the BBM molecule. The results demonstrate that the ESIPT from BBM-enol* to BBM-keto* was observed in only one of the HBI halves with a time constant of 300 fs; after that, the rotation of the dihedral angle between the two HBI halves generated a planarized BBM-keto* isomer in 3 ps, leading to a dynamic redshift of BBM-keto* emission.

Fluorescent Organic Lewis-Pair Nanoparticles: Excited-State Intramolecular Proton Transfer Molecule 2-(2'-Hydroxyphenyl)benzothiazole Undergoes GSIPT Reactions To Be a Solid-State Nanoemitter

The excited-state intramolecular proton transfer (ESIPT) reaction, one of the fundamental photochemical processes, is known to occur in 2-(2'-hydroxyphenyl)benzothiazole (HBT), showing an enol-to-keto phototautomerization. In this article, Lewis-pair adduct formation is demonstrated between HBT (Lewis base) and diphenylborinic anhydride (DPBA; Lewis acid), in which the proton transfer occurs in the ground state to form the keto tautomer of HBT. The HBT/DPBA Lewis-pair adduct exhibits strong pale-blue fluorescence at 480 nm in dichloroethane. Additionally, organic Lewis-pair nanoparticles of HBT/DPBA are successfully synthesized on the basis of a reprecipitation protocol in which HBT in conjunction with DPBA dissolved in acetone was rapidly injected into water under ultrasonication. DPBA here also acts as a stabilizing or protecting agent to form spherical nanoparticles with well dispersion. The nanoparticles also exhibit strong keto-type emission centered at 490 nm, changing the emission color to bluish-green. Quantum chemical calculations find the sole formation of the keto tautomer of HBT counterpart in the Lewis pair. Importantly, the present synthesis methodology based on Lewis acid-base chemistry does not require complicated operations to organically synthesize solid-state emitters and thus will play a key role in simply controlling the emission behavior for the new type of organic nanoparticles.

Recent advances in excited state intramolecular proton transfer mechanism-based solid state fluorescent materials and stimuli-responsive fluorescence switching

Substitutional change and controlling intra and intermolecular interactions of ESIPT molecules resulted in realizing multifunctional fluorescence properties.

Symmetrical and unsymmetrical thiazole-based ESIPT derivatives: the highly selective fluorescence sensing of Cu2+ and structure-controlled reversible mechanofluorochromism

Excited state intramolecular proton transfer (ESIPT) process-based organic fluorophores provide an opportunity to develop large Stokes-shifted multifunctional fluorescence systems for light emitting, chemosensing and bioimaging applications.

Color-Tunable and ESIPT-Inspired Solid Fluorophores Based on Benzothiazole Derivatives: Aggregation-Induced Emission, Strong Solvatochromic Effect, and White Light Emission

Organic solid materials with color-tunable emissions have been extensively applied in various fields. However, a rational design and facile synthesis of an ideal fluorophore are still challenging due to the undesirable aggregation-caused quenching effect in concentrated solution and solid form. Herein, we have developed a series of 2-(2'-hydroxyphenyl)benzothiazole (HBT)-derived color-tunable solid emitters by switching functional groups at the ortho-position of a hydroxyl group via formylation and an aldol condensation reaction. By tuning the electron-withdrawing ability and the π-conjugated framework introduced by the functional groups, fluorophores emit light covering the full-color range from blue to near-infrared regions with high quantum yields in their solid form and show a significant solvatochromic effect in polar solvents. The aggregation-induced emission (AIE) or aggregation-induced emission enhancement (AIEE) and excited-state intramolecular proton transfer (ESIPT) involving fluorescence mechanism, along with their inter/intramolecular interactions in crystals, are elucidated to depict the key factors for tunable emissions and high emitting efficiency. Furthermore, high-quality white-light-emitting materials are obtained in various solvents and polydimethylsiloxane (PDMS) films with combined fluorophores. Overall, these studies report a promising strategy for the construction of organic solid materials with color-tunable emission and shed light on methods for obtaining desirable emission efficiency.

Scattering and absorption differ drastically in their inner filter effects on fluorescence, resonance synchronous, and polarized resonance synchronous spectroscopic measurements

Reported herein is the finding that photon scattering and absorption differ drastically in inducing the sample IFE in SSF, RS2, and the PRS2 spectra measurements.

Low-Affinity Zinc Sensor Showing Fluorescence Responses with Minimal Artifacts

The study of the zinc biology requires molecular probes with proper zinc affinity. We developed a low-affinity zinc probe (HBO-ACR) based on an azacrown ether (ACR) and an 2-(2-hydroxyphenyl)benzoxazole (HBO) fluorophore. This probe design imposed positive charge in the vicinity of a zinc coordination center, which enabled fluorescence turn-on responses to high levels of zinc without being affected by the pH and the presence of other transition-metal ions. Steady-state and transient photophysical investigations suggested that such a high tolerance benefits from orchestrated actions of proton-induced nonradiative and zinc-induced radiative control. The zinc bioimaging utility of HBO-ACR has been fully demonstrated with the use of human pancreas epidermoid carcinoma, PANC-1 cells, and rodent hippocampal neurons from cultures and acute brain slices. The results obtained through our studies established the validity of incorporating positively charged ionophores for the creation of low-affinity probes for the visualization of biometals.

Iron-catalyzed synthesis of benzoxazoles by oxidative coupling/cyclization of phenol derivatives with benzoyl aldehyde oximes

An iron-catalyzed oxidative coupling/cyclization reaction for the synthesis of benzoxazoles at room temperature is reported.

Planar 2-(2-hydroxyphenyl)benzothiazole-based dyes functionalized via triple bonds as exceedingly efficient solid-state fluorophores

Two planar 2-(2-hydroxyphenyl)benzothiazole-based dyes without sterically bulky groups as exceedingly efficient solid-state fluorophores due to the absence of strong π–π intermolecular interaction.

2-Phenylbenzoxazole derivatives: a family of robust emitters of solid-state fluorescence

In addition to thermal, chemical and photochemical stability, the 2-phenylbenzoxazole fragment exhibits attractive emission properties in the solid state, thus leading to highly photoluminescent materials and sensors.

Excited-state intramolecular proton-transfer (ESIPT)-inspired solid state emitters

Solid state emitters based on excited state intramolecular proton transfer (ESIPT) have been attracting considerable interest since the past few years in the field of optoelectronic devices because of their desirable unique photophysical properties. The photophysical properties of the solid state ESIPT fluorophores determine their possible applicability in functional materials. Less fluorescence quantum efficiencies and short fluorescence lifetime in the solid state are the shortcomings of the existing ESIPT solid state emitters. Designing of ESIPT chromophores with high fluorescence quantum efficiencies and a long fluorescence lifetime in the solid state is a challenging issue because of the unclear mechanism of the solid state emitters in the excited state. Reported design strategies, detailed photophysical properties, and their applications will help in assisting researchers to overcome existing challenges in designing novel solid state ESIPT fluorophores for promising applications. This review highlights recently developed solid state ESIPT emitters with focus on molecular design strategies and their photophysical properties, reported in the last five years.

Highly emissive excited-state intramolecular proton transfer (ESIPT) inspired 2-(2′-hydroxy)benzothiazole–fluorene motifs: spectroscopic and photophysical properties investigation

Efficient solid state emission of fluorene–benzothiazole motifs via ESIPT process have been discussed experimentally and theoretically.

Rational construction of gel-based supramolecular logic gates by using a functional gelator with multiple-stimuli responsive properties

A gelator containing a sorbitol moiety and a naphthalene-based salicylideneaniline group exhibits macroscopic gel-sol behavior in response to four complementary input stimuli: temperature, UV light, OH(-), and Cu(2+). On the basis of its multiple-stimuli responsive properties, we constructed a rational gel-based supramolecular logic gate that performed OR and INH types of reversible stimulus responsive gel-sol transition in the presence of various combinations of the four stimuli when the gel state was defined as an output. Moreover, a combination two-output logic gate was obtained, owing to the existence of the naked eye as an additional output. Hence, gelator 1 could construct not only a basic logic gate, but also a two-input-two-output logic gate because of its response to multiple chemical stimuli and multiple output signals, in which one input could erase the effect of another input.

An ESIPT fluorescent dye based on HBI with high quantum yield and large Stokes shift for selective detection of Cys

DPIN shows prominent ESIPT emission even in protic/polar solvents, and is further employed as a sensor for selective detection of Cys.

Blue-green emitting sulphonamido-imidazole derivatives: ESIPT based excited state dynamics

Six imidazole derivatives characterized by the presence in their molecules of a sulphonamido group and able to display excited state intramolecular proton transfer (ESIPT) have been synthesized in a straightforward manner and the dynamics of their excited states investigated in detail in solvents of different polarity and proticity: toluene (TOL), dichloromethane (DCM) and methanol (MeOH). With the exception of one compound, these ESIPT-capable molecules are highly luminescent. The major emitting species at room temperature is the ketimine (K) tautomer but the weak emission from the enamide (E) form was detected in several cases. In general, the luminescence quantum yields (φfl) of the K form range between 0.4 and 0.6 with lifetimes of several nanoseconds, with radiative rate constants kr of the order of 10(8) s(-1). The lifetime of the E form, and hence of the ESIPT process, range between τ <10 ps up to 190 ps. At 77 K, in addition to hypsochromically shifted fluorescence bands from the E and/or K tautomers, E phosphorescence emissions with lifetimes in the range of seconds (0.4-2.5 s) are also detected. The triplet excited state absorbance of these molecules was probed in DCM and MeOH and both E (between 450-520 nm) and K (at about 420 nm) forms were identified. The triplet lifetimes at room temperature in air-free solutions are in the microsecond range, whereas the reaction rates with oxygen are of the order of 10(9) M(-1) s(-1).

Advanced organic optoelectronic materials: harnessing excited-state intramolecular proton transfer (ESIPT) process

Recently, organic fluorescent molecules harnessing the excited-state intramolecular proton transfer (ESIPT) process are drawing great attention due to their unique photophysical properties which facilitate novel optoelectronic applications. After a brief introduction to the ESIPT process and related photo-physical properties, molecular design strategies towards tailored emission are discussed in relation to their theoretical aspects. Subsequently, recent studies on advanced ESIPT molecules and their optoelectronic applications are surveyed, particularly focusing on chemical sensors, fluorescence imaging, proton transfer lasers, and organic light-emitting diodes (OLEDs).

Emission enhancement and chromism in a salen-based gel system

A new salicylideneaniline-based organogelator has been synthesized, and it can gelatinize organic solvents, including cyclohexane, toluene, benzene, and some mixed solvents. SEM images show that it has self-assembled into 1-D nanofibers, which further cross-link to form 3-D network. On the basis of the results of small-angle XRD and the optimized molecular length by semiempirical quantum calculations, the gelators are supposed to pack into a unimolecular lamellar structure with a period of 3.01 nm. Significantly, reversible chromism is realized with respect of the tautomerism between the NH and OH forms during the sol-gel freezing repetition. Furthermore, the gel can emit intense green light, and the fluorescent quantum yield of the gel is approximately 600 times higher than that of the solution. The aggregation-induced emission enhancement is ascribed to the formation of J aggregation and the inhibition of intramolecular rotation in the gel state.

Functional Organogel Based on a Salicylideneaniline Derivative with Enhanced Fluorescence Emission and Photochromism

A new organogelator based on a salicylideneaniline derivative with cholesterol moieties was synthesized, and it was proposed that it could gelate various organic solvents, such as 1-butanol, 1-octanol, butyl acetate, tetrachloromethane, benzene, toluene through combination with a gelation test. From the results of analysis by UV/Vis absorption, circular dichroism (CD), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) studies and semiempirical (AM1) calculations, we believed that the gelator molecules could self-assemble into left-handed helical nanofibers through unimolecular layer packing, which further twisted into the thicker fibers and constructed 3D networks in the gel phase. Interestingly, the organogel exhibited strong fluorescence enhancement relative to a solution of the same concentration because of the formation of J aggregations. Meanwhile, photochromism of the organogel could take place under UV-light irradiation. Both strong fluorescence emission and photochromism properties were concurrent in one system based on a salicylideneaniline derivative. It was suggested that the self-assembly of the functional organogelator could lead to unique photophysical properties.

Aggregation-induced emission enhancement of 2-(2'-hydroxyphenyl)benzothiazole-based excited-state intramolecular proton-transfer compounds

A novel class of 2-(2'-hydroxyphenyl)benzothiazole-based (HBT-based) excited-state intramolecular proton-transfer (ESIPT) compounds, N,N'-di[3-Hydroxy-4-(2'-benzothiazole)phenyl]isophthalic amide (DHIA) and N,N'-di[3-Hydroxy-4-(2'-benzothiazole)phenyl]5-tert-butyl-isophthalic amide (DHBIA) has been feasibly synthesized and the properties of their nanoparticles in THF/H2O mixed solvent were investigated. Both compounds were found to exhibit aggregation-induced emission enhancement (AIEE) due to restricted intramolecular motion and easier intramolecular proton transfer in solid state. On identical experimental conditions, the emission of DHBIA aggregates increased more remarkably than that of DHIA. Different aggregation forms of these two organic compounds, due to the steric hindrance of a single tert-butyl group, could be responsible for the notably different degrees of the fluorescence enhancement. Their aggregation modes were investigated on the basis of time-dependent absorption, scanning electron microscope (SEM) images, and molecular modeling with theoretical calculation. The photophysical dynamics were also depicted based on the extremely fast ESIPT four-level cycle.

Excited-State Intramolecular Proton Transfer in 2-(3‘-Hydroxy-2‘-pyridyl)benzoxazole. Evidence of Coupled Proton and Charge Transfer in the Excited State of Some o-Hydroxyarylbenzazoles

The influence of solvent, temperature, and viscosity on the phototautomerization processes of a series of o-hydroxyarylbenzazoles was studied by means of ultraviolet-visible (UV-vis) absorption spectroscopy and steady-state and time-resolved fluorescence spectroscopy. The compounds studied were 2-(2'-hydroxyphenyl)benzimidazole (HBI), 2-(2'-hydroxyphenyl)benzoxazole (HBO), 2-(2'-hydroxyphenyl)benzothiazole (HBT), 2-(3'-hydroxy-2'-pyridyl)benzimidazole (HPyBI), and the new derivative 2-(3'-hydroxy-2'-pyridyl)benzoxazole (HPyBO), this one studied in neutral and acid media. All of these compounds undergo an excited-state intramolecular proton transfer (ESIPT) from the hydroxyl group to the benzazole N3 to yield an excited tautomer in syn conformation. A temperature- and viscosity-dependent radiationless deactivation of the tautomer has been detected for all compounds except HBI and HPyBI. We show that this radiationless decay also takes place for 2-(3-methyl-1,3-benzothiazol-3-ium-2-yl)benzenolate (NMeOBT), the N-methylated analog of the tautomer, whose ground-state structure has anti conformation. In ethanol, the radiationless decay shows intrinsic activation energy for HPyBO and HBO; however, it is barrierless for HBT and NMeOBT and controlled instead by the solvent dynamics. The relative efficiency of the radiationless decay in the series of molecules studied supports the hypothesis that this transition is connected with a charge-transfer process taking place in the tautomer, its efficiency being related to the strength of the electron donor (dissociated phenol or pyridinol moiety) and electron acceptor (protonated benzazole). We propose that the charge transfer is associated with a large-amplitude conformational change of the tautomer, the process leading to a nonfluorescent charge-transfer intermediate. The previous ESIPT step generates the structure with the suitable redox pair to undergo the charge-transfer process; therefore, an excited-state intramolecular coupled proton and charge transfer takes place for these compounds.

Excited state proton transfer (ESPT) from phenol to nitrogen and carbon in (2-hydroxyphenyl)pyridines

ESIPT and ESPT are the only photochemical deactivation pathways of the singlet excited states of 2-, 3- and 4-(2'-hydroxyphenyl)pyridines. Due to the existence of an intramolecular hydrogen bond in 2-(2'-hydroxyphenyl)pyridine, ESIPT leads only to protonation of the pyridine nitrogen. On the other hand, the singlet excited states of 3- and 4-(2'-hydroxyphenyl)pyridine undergo protonation of both nitrogen and carbon atoms of the pyridine ring, via ESIPT or ESPT. The extent of ESIPT to carbon (as measured by extent of deuterium incorporation) can be controlled by the amount of water in the solvent system.