Ru(0001) Model Catalyst under Oxidizing and Reducing Reaction Conditions: In-Situ High-Pressure Surface X-ray Diffraction Study

2D noble metals: growth peculiarities and prospects for hydrogen evolution reaction catalysis

High-performance electrocatalysts for the hydrogen evolution reaction are of interest in the development of next-generation sustainable hydrogen production systems. Although expensive platinum-group metals have been recognized as the most effective HER catalysts, there is an ongoing requirement for the discovery of cost-effective electrode materials. This paper reveals the prospects of two-dimensional (2D) noble metals, possessing a large surface area and a high density of active sites available for hydrogen proton adsorption, as promising catalytic materials for water splitting. An overview of the synthesis techniques is given. The advantages of wet chemistry approaches for the growth of 2D metals over deposition techniques show the potential for kinetic control that is required as a precondition to prevent isotropic growth. An uncontrolled presence of surfactant-related chemicals on a 2D metal surface is however the main disadvantage of kinetically controlled growth methods, which stimulates the development of surfactant-free synthesis approaches, especially template-assisted 2D metal growth on non-metallic substrates. Recent advances in the growth of 2D metals using a graphenized SiC platform are discussed. The existing works in the field of practical application of 2D noble metals for hydrogen evolution reaction are analyzed. This paper shows the technological viability of the "2D noble metals" concept for designing electrochemical electrodes and their implementation into future hydrogen production systems, thereby providing an inspirational background for further experimental and theoretical studies.

Low-energy electron microscopy intensity-voltage data - Factorization, sparse sampling and classification

Low-energy electron microscopy (LEEM) taken as intensity-voltage (I-V) curves provides hyperspectral images of surfaces, which can be used to identify the surface type, but are difficult to analyse. Here, we demonstrate the use of an algorithm for factorizing the data into spectra and concentrations of characteristic components (FSC³ ) for identifying distinct physical surface phases. Importantly, FSC³ is an unsupervised and fast algorithm. As example data we use experiments on the growth of praseodymium oxide or ruthenium oxide on ruthenium single crystal substrates, both featuring a complex distribution of coexisting surface components, varying in both chemical composition and crystallographic structure. With the factorization result a sparse sampling method is demonstrated, reducing the measurement time by 1-2 orders of magnitude, relevant for dynamic surface studies. The FSC³ concentrations are providing the features for a support vector machine-based supervised classification of the surface types. Here, specific surface regions which have been identified structurally, via their diffraction pattern, as well as chemically by complementary spectro-microscopic techniques, are used as training sets. A reliable classification is demonstrated on both example LEEM I-V data sets.

In situ studies of the cathodic stability of single-crystalline IrO2(110) ultrathin films supported on RuO2(110)/Ru(0001) in an acidic environment

We investigate with in situ surface X-ray diffraction (SXRD) and X-ray reflectivity (XRR) experiments the cathodic stability of an ultrathin single-crystalline IrO2(110) film with a regular array of mesoscopic rooflike structures that is supported on a RuO2(110)/Ru(0001) template. It turns out that the planarity of the single-crystalline IrO2(110) film is lost in that IrO2(110) oxide domains delaminate at a cathodic potential of -0.18 V. Obviously, the electrolyte solution is able to reach the RuO2(110) layer presumably through the surface grain boundaries of the IrO2(110) layer. Subsequently, the single-crystalline RuO2(110) structure-directing template is reduced to amorphous hydrous RuO2, with the consequence that the IrO2(110) film loses partly its adhesion to the template. From in situ XRR experiments we find that the IrO2(110) film does not swell upon cathodic polarization down to -0.18 V, while from in situ SXRD experiments, the lattice constants of IrO2(110) are shown to be not affected. The rooflike mesostructure of the IrO2(110) flakes remains intact after cathodic polarization to -0.18 V, evidencing that the crystallinity of IrO2(110) is retained.

Kinetics of the Thermal Oxidation of Ir(100) toward IrO2 Studied by Ambient-Pressure X-ray Photoelectron Spectroscopy

Using time-lapsed ambient-pressure X-ray photoelectron spectroscopy, we investigate the thermal oxidation of single-crystalline Ir(100) films toward rutile IrO₂(110) in situ. We initially observe the formation of a carbon-free surface covered with a complete monolayer of oxygen, based on the binding energies of the Ir 4f and O 1s core level peaks. During a rather long induction period with nearly constant oxygen coverage, the work function of the surface changes continuously as sensed by the gas phase O 1s signal. The sudden and rapid formation of the IrO₂ rutile phase with a thickness above 3 nm, manifested by distinct binding energy changes and substantiated by quantitative XPS analysis, provides direct evidence that the oxide film is formed via an autocatalytic growth mechanism that was previously proposed for PbO and RuO₂.

Stable reconstruction of the (110) surface and its role in pseudocapacitance of rutile-like RuO2

Surfaces of rutile-like RuO₂, especially the most stable (110) surface, are important for catalysis, sensing and charge storage applications. Structure, chemical composition, and properties of the surface depend on external conditions. Using the evolutionary prediction method USPEX, we found stable reconstructions of the (110) surface. Two stable reconstructions, RuO₄-(2 × 1) and RuO₂-(1 × 1), were found, and the surface phase diagram was determined. The new RuO₄-(2 × 1) reconstruction is stable in a wide range of environmental conditions, its simulated STM image perfectly matches experimental data, it is more thermodynamically stable than previously proposed reconstructions, and explains well pseudocapacitance of RuO₂ cathodes.

In Situ Optical Reflectance Difference Observations of CO Oxidation over Pd(100)

Using a home-built reflectometer, we have investigated the changes in the optical reflectivity of a Pd(100) model catalyst during CO oxidation under high-pressure, high-temperature conditions. We observe changes in optical contrast when exposing the surface to CO oxidation conditions at 200 mbar from room temperature up to 400 °C. These changes in reflectivity are a result both of the formation of a surface oxide layer and of a change in surface roughness because of gas exposure. However, the reflectivity is more sensitive to the presence of a thin, flat oxide layer than to surface roughness. CO oxidation plays an important role in the decrease of the reflectivity. Since adding a reducing agent to the gas mixture renders it unlikely that the oxide thickness increases, we conclude that the observed decrease in reflectivity is dominated by increased surface roughness because of the catalytic reaction. We contribute this observed surface roughening to a Mars-van Krevelen-type reaction mechanism.

The Nanostructuring of Atomically Flat Ru(0001) upon Oxidation and Reduction

The O/Ru(0001) system is widely studied due to its rich phase variety of various stoichiometry and atomic arrangements, including the formation of a RuO₂/Ru(0001) oxide layer. Apart from homogeneous ruthenium surfaces in certain oxidation states, also strongly heterogeneous surfaces can exist due to oxidation state's variation at the nanoscale. We report on a scanning tunneling microscopy (STM) study of the nanostructuring of the oxidized Ru(0001) surface as a result of its interaction with molecular oxygen at elevated temperatures and subsequent reduction of a resulting RuO₂ film by CO or HCl molecules from the gas phase in high-vacuum environment.

Oxygen-Driven Porous Film Formation of Single-Crystalline Ru Deposited on Au(111)

We examined the interaction of oxygen with ultrathin Ru layers deposited on a Au(111) substrate using scanning tunneling microscopy, X-ray photoelectron spectroscopy, and low-energy electron diffraction. The deposition of pure Ru below one monolayer (ML) at room temperature leads to the formation of clusters on the Au(111) surface, preferentially located at the elbow sites of the herringbone reconstruction. Subsequent exposure of molecular oxygen to such a Ru-covered Au(111) surface at 680 K results in the growth of two-layer-thick Ru islands that are embedded in the top Au(111) layer. This structural reorganization of Ru is driven by the minimization of surface energy and mediated by a mobile RuOx species. Deposition of an increasing amount of Ru at 620 K (0.5-10 ML, ML = monolayer) leads to a rough Ru film on Au(111). Subsequent oxygen treatment (10(-5) mbar) at 680 K creates either a porous Ru film (<4 ML) or a flat RuO2(110) film (>6 ML) depending on the thickness of the Ru film.

Role of RuO2(100) in surface oxidation and CO oxidation catalysis on Ru(0001)

Oxidation of Ru(0001) induces the simultaneous formation of RuO₂(100) and RuO₂(110) and a structure-sensitive oxygen spillover during CO oxidation.

Nanoscale Origin of Mesoscale Roughening: Real-Time Tracking and Identification of Three Distinct Ruthenium Oxide Phases in Ruthenium Oxidation

The structural modification of the Ru(0001) surface is followed in real-time using low-energy electron microscopy at elevated temperatures during exposure to molecular oxygen. We observe the nucleation and growth of three different RuO2 facets, which are unambiguously identified by single-domain microspot low-energy electron diffraction (μLEED) analysis from regions of 250 nm in diameter. Structural identification is then pushed to the true nanoscale by employing very-low-energy electron reflectivity spectra R(E) from regions down to 10 nm for structural fingerprinting of complex reactions such as the oxidation of metal surfaces. Calculations of R(E) with an ab initio scattering theory confirm the growth of (110), (100), and (101) orientations of RuO2 and explain the shape of the R(E) spectra in terms of the conducting band structure. This methodology is ideally suited to identify the structure of supported ultrathin films and dynamic transformations at multicomponent interfaces down to few nanometer lateral resolution at elevated temperature and in reactive environments.

Insights into the gas phase oxidation of Ru(0001) on the mesoscopic scale using molecular oxygen

We present an extensive mesoscale study of the initial gas phase oxidation of Ru(0001), employing in situ low-energy electron microscopy (LEEM), micro low-energy electron diffraction (μ-LEED) and scanning tunneling microscopy (STM).

When ruthenia met titania: achieving extraordinary catalytic activity at low temperature by nanostructuring of oxides

Nanostructured ruthenia shows strongly modified properties compared to the pure oxide thereby becoming a low-temperature high-activity catalyst.

Intrinsic relation between catalytic activity of CO oxidation on Ru nanoparticles and Ru oxides uncovered with ambient pressure XPS

Recent progress in colloidal synthesis of nanoparticles with well-controlled size, shape, and composition, together with development of in situ surface science characterization tools, such as ambient pressure X-ray photoelectron spectroscopy (APXPS), has generated new opportunities to unravel the surface structure of working catalysts. We report an APXPS study of Ru nanoparticles to investigate catalytically active species on Ru nanoparticles under oxidizing, reducing, and CO oxidation reaction conditions. The 2.8 and 6 nm Ru nanoparticle model catalysts were synthesized in the presence of poly(vinyl pyrrolidone) polymer capping agent and deposited onto a flat Si support as two-dimensional arrays using the Langmuir-Blodgett deposition technique. Mild oxidative and reductive characteristics indicate the formation of surface oxide on the Ru nanoparticles, the thickness of which is found to be dependent on nanoparticle size. The larger 6 nm Ru nanoparticles were oxidized to a smaller extent than the smaller Ru 2.8 nm nanoparticles within the temperature range of 50-200 °C under reaction conditions, which appears to be correlated with the higher catalytic activity of the bigger nanoparticles. We found that the smaller Ru nanoparticles form bulk RuO(2) on their surfaces, causing the lower catalytic activity. As the size of the nanoparticle increases, the core-shell type RuO(2) becomes stable. Such in situ observations of Ru nanoparticles are useful in identifying the active state of the catalysts during use and, hence, may allow for rational catalyst designs for practical applications.

On the CO-Oxidation over Oxygenated Ruthenium

The oxidation of carbon monoxide over polycrystalline ruthenium dioxide (RuO2) powder was studied in a packed-bed reactor and by bulk and surface analytical methods. Activity data were correlated with bulk phases in an in-situ X-ray diffraction (XRD) setup at atmospheric pressure. Ruthenium dioxide was pre-calcined in pure oxygen at 1073 K. At this stage RuO2 is completely inactive in the oxidation of CO. After a long induction period in the feed at 503 K RuO2 becomes active with 100% conversion, while in-situ XRD reveals no changes in the RuO2 diffraction pattern. At this stage selective roughening of apical RuO2 facets was observed by scanning electron microscopy (SEM). Seldom also single lateral facets are roughened. EDX indicated higher oxygen content in the following order: flat lateral facets > rough lateral facets > rough apical facets. Further, experiments in the packed bed reactor indicated oscillations in the CO2 formation rate. At even higher temperatures in reducing feed (533–543 K) the sample reduces to ruthenium metal according to XRD. The reduced particles exhibiting lower ignition temperature are very rough with cracks and deep star-shaped holes. An Arrhenius plot of the CO2 formation rate below the ignition temperature reveals the reduced samples to be significantly more active based on mass unit and shows lower apparent activation energy than the activated oxidized sample. Micro-spot X-ray photoelectron spectroscopy (XPS) and XPS microscopy experiments were carried out on a Ru(0001) single crystal exposed to oxygen at different temperature. Although low energy electron diffraction (LEED) images show a strong 1×1 pattern, the XPS data indicated a wide lateral inhomogeneity with different degree of oxygen dissolved in the subsurface layers. All these and the literature data are discussed in the context of different active states and transport issues, and the metastable nature of a phase mixture under conditions of high catalytic activity.

Nanoscale analysis of Ru(0001) oxidation using low-energy and photoemission electron microscopy

CO oxidation over oxygen-rich Ru(0001) surfaces is one of the most studied catalytic oxidation reactions in surface science and of widespread interest as a model system for the redox chemistry of transition metal model catalysts. Here, we present an extensive low-energy electron microscopy (LEEM) and photoemission electron microscopy study of the oxidation of Ru(0001), which constitutes a crucial step in understanding the overall surface reaction. After characterizing the different surface nanoscale morphologies observed depending on the oxidation temperature, three distinct oxygen-rich phases are identified by dark-field microscopy and local valence-band spectroscopy. Furthermore, in situ LEEM allows us to follow the growth of single rutile oxide nuclei in real time and determine the relevant activation barriers that induce quasi-one-dimensional growth of oxide nanorods, whose growth rate is limited by O incorporation.

Unusual Process of Water Formation on RuO2(110) by Hydrogen Exposure at Room Temperature

The reduction mechanism of the RuO(2)(110) surface by molecular hydrogen exposure is unraveled to an unprecedented level by a combination of temperature programmed reaction, scanning tunneling microscopy, high-resolution core level shift spectroscopy, and density functional theory calculations. We demonstrate that even at room temperature hydrogen exposure to the RuO(2)(110) surface leads to the formation of water. In a two-step process, hydrogen saturates first the bridging oxygen atoms to form (O(br)-H) species and subsequently part of these O(br)-H groups move to the undercoordinated Ru atoms where they form adsorbed water. This latter process is driven by thermodynamics leaving vacancies in the bridging O rows.