NMR and SANS Studies of Aggregation and Microemulsion Formation by Phosphorus Fluorosurfactants in Liquid and Supercritical Carbon Dioxide

Open-Bundle Structure as the Unfolding Intermediate of Cytochrome c' Revealed by Small Angle Neutron Scattering

The dynamic structure changes, including the unfolding, dimerization, and transition from the compact to the open-bundle unfolding intermediate structure of Cyt c', were detected by a small-angle neutron scattering experiment (SANS). The structure of Cyt c' was changed into an unstructured random coil at pD = 1.7 (Rg = 25 Å for the Cyt c' monomer). The four-α-helix bundle structure of Cyt c' at neutral pH was transitioned to an open-bundle structure (at pD ~13), which is given by a numerical partial scattering function analysis as a joint-clubs model consisting of four clubs (α-helices) connected by short loops. The compactly folded structure of Cyt c' (radius of gyration, Rg = 18 Å for the Cyt c' dimer) at neutral or mildly alkaline pD transited to a remarkably larger open-bundle structure at pD ~13 (Rg = 25 Å for the Cyt c' monomer). The open-bundle structure was also supported by ab initio modeling.

Evaluation of Bio-Mechanistic Behavior of Liquid Self-Microemulsifying Drug Delivery System in Biorelevant Media

The aim of the study is to mechanistically investigate the drug loci, structural integrity, chemical interactions, and absorption behavior of the liquid self-microemulsifying drug delivery system (SMEDDS). The loci of drug molecules in self-forming microemulsions in biorelevant media (fasted state simulated gastric fluid and fed state simulated intestinal fluid) were investigated by ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy. Chemical interactions were observed through attenuated total reflectance spectroscopy (ATR). The structural integrity of self-forming microemulsions in biorelevant media was determined by small angle X-ray scattering (SAXS) and fluorescence resonance energy transfer (FRET). Morphological features of self-forming microemulsion were determined by confocal laser scanning microscopy. In vitro, lipid digestion behavior was evaluated for particle size, zeta potential, free fatty acids (FFA), and drug released through standard protocols. In-house characterizations were determined through standard methodologies. ¹H and ¹³C NMR revealed that drug loci were found in a majority in the oily core region in the self-forming microemulsion. The ATR signifies that no inherent chemical was observed in the liquid SMEDDS and drug-loaded self-microemulsions in the biorelevant media. Structural integrity was well maintained during the dispersive and digestive phases in the gastrointestinal lumen during lipolysis in biorelevant conditions, as revealed by SAXS and FRET. An in vitro digestion study in biorelevant conditions depicts no fluctuations in size and zeta potential with a predominant release of FFA and drug, and was to be revealed physiologically acceptable for clinical applications.

Computer simulation study of fluorocarbon phosphate surfactant based aqueous reverse micelle in supercritical CO2: roles of surfactant functional groups, ionic strength, and phase changes in CO2

Structural and dynamic properties of an aqueous micelle organized from fluorocarbon phosphate surfactant molecules in supercritical carbon dioxide (CO₂) are investigated via molecular dynamics computer simulations. The roles of the functional groups and ionic strength of the surfactants on the formation of reverse micelles in supercritical CO₂, and related water dynamics characterized as translational and reorientational dynamics, are systematically demonstrated by employing three different phosphate-based surfactants paired with sodium cations. The strong electrostatic interactions between the phosphate head groups and sodium cations result in formation of an aqueous core inside the surfactant aggregates, where water molecules are bonded together with loss of the tetrahedral hydrogen bonded network found in bulk water. It is found that all the three surfactants with CO₂-philic fluorocarbon double tails build up well-stabilized reverse micelles in supercritical CO₂, avoiding direct contacts between CO₂ and water molecules. Despite this, the surfactant with a carboxylic ester linkage between the phosphate head and fluorocarbon tail group tends to coordinate water molecules toward sustaining the inter-water hydrogen bonds, indicating better efficiency at covering the aqueous core with hydrophobic groups compared to one without a carboxylic ester group. As for water molecules confined in the reverse micelle, their translational and reorientational motions, and fluctuating dynamics of the inter-water hydrogen bonds, significantly slow down compared to bulk water at ambient temperature. The water dynamics become more restricted with an increase in ionic strength of the anionic surfactant; this is attributed to divalent surfactant heads and sodium cations being more tightly bound together with bonding to water compared to monovalent ones. Lastly, the structural and dynamic changes of the reverse micelle caused by a phase change in CO₂ are monitored with gradually decreasing temperature and pressure from the supercritical to gaseous state for CO₂. The average reverse micelle structure equilibrated in supercritical CO₂ is found to remain stable over a time period of 0.2 ms through a depressurization process to gaseous CO₂. We note that the diverse pathways of surfactant self-aggregation in gaseous CO₂ could be controlled by the preceding solvation procedure in the supercritical regime which governs the final aggregated structures in gaseous CO₂.

Anisotropic reversed micelles with fluorocarbon-hydrocarbon hybrid surfactants in supercritical CO2

Previous work (M. Sagisaka, et al. Langmuir 31 (2015) 7479-7487), showed the most effective fluorocarbon (FC) and hydrocarbon (HC) chain lengths in the hybrid surfactants FCm-HCn (sodium 1-oxo-1-[4-(perfluoroalkyl)phenyl]alkane-2-sulfonates, where m = FC length and n = HC length) were m and n = 6 and 4 for water solubilization, whereas m 6 and n 6, or m 6 and n 5, were optimal chain lengths for reversed micelle elongation in supercritical CO₂. To clarify why this difference of only a few methylene chain units is so effective at tuning the solubilizing power and reversed micelle morphology, nanostructures of water-in-CO₂ (W/CO₂) microemulsions were investigated by high-pressure small-angle neutron scattering (SANS) measurements at different water-to-surfactant molar ratios (W₀) and surfactant concentrations. By modelling SANS profiles with cylindrical and ellipsoidal form factors, the FC6-HCn/W/CO₂ microemulsions were found to increase in size with increasing W₀ and surfactant concentration. Ellipsoidal cross-sectional radii of the FC6-HC4/W/CO₂ microemulsion droplets increased linearly with W₀, and finally reached ∼39 Å and ∼78 Å at W₀ = 85 (close to the upper limit of solubilizing power). These systems appear to be the largest W/CO₂ microemulsion droplets ever reported. The aqueous domains of FC6-HC6 rod-like reversed micelles increased in size by 3.5 times on increasing surfactant concentration from 35 mM to 50 mM: at 35 mM, FC6-HC5 formed rod-like reversed micelles 5.3 times larger than FC6-HC6. Interestingly, these results suggest that hybrid HC-chains partition into the microemulsion aqueous cores with the sulfonate headgroups, or at the W/CO₂ interfaces, and so play important roles for tuning the W/CO₂ interfacial curvature. The super-efficient W/CO₂-type solubilizer FC6-HC4, and the rod-like reversed micelle forming surfactant FC6-HC5, represent the most successful cases of low fluorine content additives. These surfactants facilitate VOC-free, effective and energy-saving CO₂ solvent systems for applications such as extraction, dyeing, dry cleaning, metal-plating, enhanced oil recovery and organic/inorganic or nanomaterial synthesis.

Nanostructures in water-in-CO2 microemulsions stabilized by double-chain fluorocarbon solubilizers

High-pressure small-angle neutron scattering (HP-SANS) studies were conducted to investigate nanostructures and interfacial properties of water-in-supercritical CO2 (W/CO2) microemulsions with double-fluorocarbon-tail anionic surfactants, having different fluorocarbon chain lengths and linking groups (glutarate or succinate). At constant pressure and temperature, the microemulsion aqueous cores were found to swell with an increase in water-to-surfactant ratio, W0, until their solubilizing capacities were reached. Surfactants with fluorocarbon chain lengths of n = 4, 6, and 8 formed spherical reversed micelles in supercritical CO2 even at W0 over the solubilizing powers as determined by phase behavior studies, suggesting formation of Winsor-IV W/CO2 microemulsions and then Winsor-II W/CO2 microemulsions. On the other hand, a short C2 chain fluorocarbon surfactant analogue displayed a transition from Winsor-IV microemulsions to lamellar liquid crystals at W0 = 25. Critical packing parameters and aggregation numbers were calculated by using area per headgroup, shell thickness, the core/shell radii determined from SANS data analysis: these parameters were used to help understand differences in aggregation behavior and solubilizing power in CO2. Increasing the microemulsion water loading led the critical packing parameter to decrease to ~1.3 and the aggregation number to increase to >90. Although these parameters were comparable between glutarate and succinate surfactants with the same fluorocarbon chain, decreasing the fluorocarbon chain length n reduced the critical packing parameter. At the same time, reducing chain length to 2 reduced negative interfacial curvature, favoring planar structures, as demonstrated by generation of lamellar liquid crystal phases.

Effective and efficient surfactant for CO2 having only short fluorocarbon chains

A previous study (Langmuir2011, 27, 5772) found the fluorinated double-tail sulfogulutarate 8FG(EO)(2) to act as a superefficient solubilizer for water in supercritical CO(2) (W/CO(2)) microemulsions. To explore more economic CO(2)-philic surfactants with high solubilizing power as well as rapid solubilization rates, the effects of fluorocarbon chain length and linking group were examined with sodium 1,5-bis(1H,1H,2H,2H-perfluoroalkyloxy)-1,5-dioxopentane-2-sulfonates (nFG(EO)(2), fluorocarbon chain length n = 4, 6, 8) and sodium 1,4-bis(1H,1H,2H,2H-perfluoroalkyloxy)-1,4-dioxobutane-2-sulfonate (nFS(EO)(2), n = 4, 8). Visual observation and UV-vis spectral measurements with methyl orange as a reporter dye indicated a maximum water-to-surfactant molar ratio (W(0)) in the microemulsions, which was 60-80 for nFG(EO)(2) and 40-50 for nFG(EO)(2). Although it is normally expected that high solubilizing power requires long fluorocarbon surfactant chains, the shortest fluorocarbon 4FG(EO)(2) interestingly achieved the highest W(0) (80) transparent single-phase W/CO(2) microemulsion. In addition, a very rapid solubilization of loaded water into CO(2) was observed for 4FG(EO)(2) even at a high W(0) of ~80.

Super-efficient surfactant for stabilizing water-in-carbon dioxide microemulsions

The fluorinated double-tailed glutarate anionic surfactant, sodium 1,5-bis[(1H,1H,2H,2H-perfluorodecyl)oxy]-1,5-dioxopentane-2-sulfonate (8FG(EO)(2)), was found to stabilize water-in-supercritical CO(2) microemulsions with high water-to-surfactant molar ratios (W(0)). Studies were carried out here to obtain detailed information on the phase stability and nanostructure of the microemulsions by using a high-pressure UV-vis dye probe and small-angle neutron scattering (SANS) measurements. The UV-vis spectra, with methyl orange as a reporter dye, indicated a maximum attainable W(0) of 60 at 45 and 75 °C, and SANS profiles indicated regular droplet swelling with a linear relationship between the water core nanodroplet radius and W(0). This represents the highest water solubilization reported to date for any water-in-CO(2) microemulsion. Further analysis of the SANS data indicated critical packing parameters for 8FG(EO)(2) at the microemulsion interface >1.34, representing approximately 1.1 times the value for common aerosol-OT in water-in-heptane microemulsions under equivalent conditions.

Continuous Tuning of Cadmium Sulfide and Zinc Sulfide Nanoparticle Size in a Water-in-Supercritical Carbon Dioxide Microemulsion

The size and size dispersion of cadmium sulfide and zinc sulfide semiconductor nanoparticles can be continuously tuned over a wide range of values by adjusting the density of the fluid phase in water-in-supercritical CO2 microemulsions. The average size of the ZnS nanoparticles decreases linearly from approximately 9.1 to 1.9 nm with increasing fluid density from 0.86 to 0.99 g cm(-3) at a water-to-surfactant ratio (W value) of 10. At a W value of 6, the particle size can be tuned from 7.0 to 1.5 nm in the same density range. In the case of CdS nanocrystals, the size varied from 7.1 to 2.0 nm when the W value was 10 and from 4.0 to 1.3 nm when the W value employed was 6, in the same density range. Monodispersive CdS and ZnS nanoparticles were synthesized by chemical reaction of cadmium or zinc nitrate with sodium sulfide, using two water-in-supercritical CO2 microemulsions as nanoreactors followed by protection with a fluorinated-thiol stabilizer. The stabilizer is introduced at 6 and 16 minutes after the mixing of the two microemulsions where the intensity of the characteristic absorption peak due to the quantum confinement properties of the CdS and ZnS nanoparticles (280 and 360 nm) reaches a maximum, respectively. The supercritical CO2 microemulsion method represents a simple approach to use a density-tunable solvent for synthesizing size-controlled semiconductor nanoparticles over a broad range of values.

Effect of Compressed CO2 on the Critical Micelle Concentration and Aggregation Number of AOT Reverse Micelles in Isooctane

The effect of compressed CO2 on the critical micelle concentration (cmc) and aggregation number of sodium bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles in isooctane solution was studied by UV/Vis and fluorescence spectroscopy methods in the temperature range of 303.2-318.2 K and at different pressures or mole fractions of CO2 (X(CO2)). The capacity of the reverse micelles to solubilize water was also determined by direct observation. The standard Gibbs free energy (DeltaGo(m)), standard enthalpy (DeltaHo(m)), and standard entropy (DeltaSo(m)) for the formation of the reverse micelles were calculated by using the cmc data determined. It was discovered that the cmc versus X(CO2) curve and the DeltaGo(m) versus X(CO2) curve for a fixed temperature have a minimum, and the aggregation number and water-solubilization capacity of the reverse micelles reach a maximum at the X(CO2) value corresponding to that minimum. These results indicate that CO2 at a suitable concentration favors the formation of and can stabilize AOT reverse micelles. A detailed thermodynamic study showed that the driving force for the formation of the reverse micelles is entropy.