The Direct Electron Transfer of Myoglobin Based on the Electron Tunneling in Proteins

Electrogelated drug-embedded silk/gelatin/rGO degradable electrode for anti-inflammatory applications in brain-implant systems

Implantable electrodes have raised great interest over the last years with the increasing incidence of neurodegenerative disorders. For brain implant devices, some key factors resulting in the formation of glial scars, such as mechanical mismatch and acute injury-induced inflammation, should be considered for material design. Therefore, in this study, a new biocompatible flexible electrode (e-SgG) with arbitrary shapes on a positive electrode was developed via electrogelation by applying a direct electrical voltage on a silk fibroin/gelatin/reduced graphene oxide composite hydrogel. The implantable flexible e-SgG-2 film with 1.23% rGO content showed high Young's modulus (11-150 MPa), which was sufficient for penetration under dried conditions but subsequently became a biomimetic brain tissue with low Young's modulus (50-3200 kPa) after insertion in the brain. At the same time, an anti-inflammatory drug (DEX) incorporated into the e-SgG-2 film can be electrically stimulated to exhibit two-stage release to overcome tissue inflammation during cyclic voltammetry via degradation by applying an AC field. The results of cell response to the SF/gelatin/rGO/DEX composite film showed that the released DEX could interrupt astrocyte growth to reduce the inflammatory response but showed non-toxicity toward neurons, which demonstrated a great potential for the application of the biocompatible and degradable e-SgG-D electrodes in the improvement of nerve tissue repair.

Synergistic Osteogenesis of Biocompatible Reduced Graphene Oxide with Methyl Vanillate in BMSCs

Methyl vanillate (MV), a recently characterized small molecule, can promote the Wnt/β-catenin signaling pathway and induce osteoblast differentiation both in vitro and in vivo. On the other hand, graphene-based materials have been introduced into the field of biomedical sciences in the past decade, and graphene oxide (GO), which serves as an efficient nanocarrier for drug delivery, has attracted great attention for its biomedical applications in tissue engineering. This study aimed to develop a biocompatible gelatin-reduced graphene oxide (GOG) for MV delivery so as to realize the effective osteogenesis for bone repair. First, GOG was prepared, and its morphology as well as properties were then characterized using scanning electron microscope (SEM), transmission electron microscopy (TEM), atomic force microscope (AFM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA), respectively. In addition, the endocytosis of GOG in bone marrow stromal cells (BMSCs) was also investigated with the treatment of Rhodamine 6G (R6G)-labeled GOG. Our results found that GOG could be easily absorbed by cells and was distributed in both nucleus and cytoplasm, thus suggesting the favorable biocompatibility of GOG. Moreover, the effect of MV on osteogenesis was also tested, the results of which indicated that MV could promote BMSC osteogenesis in a concentration-dependent manner, and significant enhancement could be achieved at the concentration of 1 μg/mL. In addition, the complex containing different concentrations of GOG and an optimal concentration of MV was used to investigate the synergistic effect between GOG and MV on pro-osteogenesis. The results revealed that the weight ratio of MV/GOG of 1:1000 could attain remarkably enhanced osteoinduction in BMSCs, as evaluated by alkaline phosphatase (ALP) assay, alizarin red S (ARS) staining, immunofluorescence staining, and gene expression of related osteogenic markers. Taken together, these data had provided strong evidence that the complex of MV and GOG could induce osteogenesis, which was promising for bone tissue engineering.

Highly sensitive fluorogenic sensing of L-Cysteine in live cells using gelatin-stabilized gold nanoparticles decorated graphene nanosheets

A highly sensitive and selective fluorogenic sensing of L-Cysteine (L-Cys) was implemented based on gelatin stabilized gold nanoparticles decorated reduced graphene oxide (rGO/Au) nanohybrid. The rGO/Au nanohybrid was prepared by the one-pot hydrothermal method and well characterized by different physiochemical techniques. The nanohybrid exhibits a weak fluorescence of rGO due to the energy transfer from the rGO to Au NPs. The rGO/Au nanohybrid shows enhanced fluorescence activity due to the restoration of quenched fluorescence of rGO/Au nanohybrid in presence of L-Cys. The rGO/Au nanohybrid exhibits much lower detection limit of 0.51 nM for L-Cys with higher selectivity. The fluorescence sensing mechanism arose from the fluorescence recovery due to the stronger interaction between Au NPs and L-Cys, and consequently, the energy transfer was prevented between rGO and Au NPs. The practicability of rGO/Au sensor was implemented by invitro bioimaging measurements in Colo-205 (colorectal adenocarcinoma) and MKN-45 (gastric carcinoma) cancer live cells with excellent biocompatibility.

Protein bioelectronics: a review of what we do and do not know

We review the status of protein-based molecular electronics. First, we define and discuss fundamental concepts of electron transfer and transport in and across proteins and proposed mechanisms for these processes. We then describe the immobilization of proteins to solid-state surfaces in both nanoscale and macroscopic approaches, and highlight how different methodologies can alter protein electronic properties. Because immobilizing proteins while retaining biological activity is crucial to the successful development of bioelectronic devices, we discuss this process at length. We briefly discuss computational predictions and their connection to experimental results. We then summarize how the biological activity of immobilized proteins is beneficial for bioelectronic devices, and how conductance measurements can shed light on protein properties. Finally, we consider how the research to date could influence the development of future bioelectronic devices.

Stability, Scalability, and Reusability of a Volume Efficient Biocatalytic System Constructed on Magnetic Nanoparticles

This report investigates for the first time stability, scalability, and reusability characteristics of a protein nano-bioreactor useful for green synthesis of fine chemicals in aqueous medium extracting maximum enzyme efficiency. Enzyme catalysts conjugated with magnetic nanomaterials allow easy product isolation after a reaction involving simple application of a magnetic field. In this study, we examined a biocatalytic system made of peroxidase-like myoglobin (Mb), as a model protein, to covalently conjugate with poly(acrylic acid) functionalized magnetic nanoparticles (MNPs, 100 nm hydrodynamic diameter) to examine the catalytic stability, scalability, and reusability features of this bioconjugate. Application of the conjugate was effective for electrochemical reduction of organic and inorganic peroxides, and for both peroxide-mediated and electrocatalytic oxidation of the protein substrate 2, 2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) with greater turnover rates and product yields than Mb prepared in solution or MNP alone. Mb-attached MNPs displayed extensive catalytic stability even after 4 months of storage compared to Mb present in solution. Five- and ten-fold scale up of MNPs in the bioconjugates resulted in two- and four-fold increases in protein-catalyzed oxidation products, respectively. Nearly 40% of the initial product was present even after four reuses, which is advantageous for synthesizing sufficient products with a minimal investment of precious enzymes. Thus, the results obtained in this study are highly significant in guiding cost-effective development and efficient multiple uses of enzyme catalysts for biocatalytic, electrocatalytic, and biosensing applications via magnetic nanomaterials conjugation.

A biomemory chip composed of a myoglobin/CNT heterolayer fabricated by the protein-adsorption-precipitation-crosslinking (PAPC) technique

In this study, a biomemory chip consisting of a myoglobin/carbon nanotube (CNT) heterolayer is fabricated via the protein-adsorption-precipitation-crosslinking (PAPC) technique for electrochemical signal enhancement, long-term stability, and improved memory function. The PAPC technique is used to fabricate a myoglobin/CNT heterolayer with a CNT core and a high-density myoglobin-shell structure to achieve efficient heterolayer formation and improved performance of the heterolayer. The fabricated myoglobin/CNT heterolayer is immobilized onto a Au substrate through a chemical linker. The surface morphology of the deposited heterolayer is investigated via transmission electron microscopy and atomic force microscopy. The redox properties of the myoglobin/CNT heterolayer are investigated by cyclic voltammetry, and the memory function of the heterolayer, including the "write step" and "erase step," is measured by chronoamperometry. Compared with the myoglobin monolayer without CNT, the myoglobin/CNT heterolayer fabricated by the PAPC technique exhibits greater electrochemical signal enhancement, long-term stability at room temperature, and improved memory function. The results suggest that the proposed myoglobin/CNT heterolayer produced via the PAPC technique can be applied as a platform for bioelectronic devices to achieve improved signal intensity and durability.

Electrochemical method assisted immobilization and orientation of myoglobin into biomimetic brij 56 film and its direct electrochemistry study

A simple cyclic voltammetric method was applied to assemble and orient a model protein, namely, myoglobin (Mb), into a biocompatible Brij 56 film. Ultraviolet-visible and circular dichroism spectra indicated that Mb in Brij 56 matrix preserved its secondary structure. Fourier transform infrared spectra confirmed the formation of hydrogen bonds between Mb and Brij 56. These hydrogen bonds acted as the electron tunnel to transfer electrons from Mb's active sites to the underlying glassy carbon electrode. Effective direct electron transfer of Mb was realized with the presence of a couple of quasi-reversible and well-defined redox peaks at -310 mV (vs standard calomel electrode) in the studied potential range. The peaks were attributed to the redox couple of heme Fe(II)/Fe(III) of the well-oriented Mb in Brij 56 matrix. The surface coverage and the electron transfer rate (ks) of Mb immobilized into the Brij 56 film was ∼4.9×10(-11) mol cm(-2) and 72.6±3.0 s(-1), respectively. An excellent electrocatalytic response of the immobilized Mb toward nitrite in the absence of electron transfer mediators was observed. These results emphasized that the biomimetic Brij 56 could be used as an attractive material for immobilizing proteins and constructing biosensors.

Hierarchical Co3O4/Co(OH)2 Nanoflakes as a Supercapacitor Electrode: Experimental and Semi-Empirical Model

In this research, facile and low cost synthesis methods, electrodeposition at constant current density and anodization at various applied voltages, were used to produce hierarchical cobalt oxide/hydroxide nanoflakes on top of porous anodized cobalt layer. The maximum electrochemical capacitance of 601 mF cm(-2) at scan rate of 2 mV s(-1) was achieved for 30 V optimized anodization applied voltage with high stability. Morphology and surface chemical composition were determined by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analysis. The size, thickness, and density of nanoflakes, as well as length of the porous anodized Co layer were measured about 460±45 nm, 52±5 nm, 22±3 μm(-2), and 3.4±0.3 μm for the optimized anodization voltage, respectively. Moreover, the effect of anodization voltage on the resulting supercapacitance was modeled by using the Butler-Volmer formalism. The behavior of the modeled capacitance in different anodization voltages was in good agreement with the measured experimental data, and it was found that the role and contribution of the porous morphology was more decisive than structure of nanoflakes in the supercapacitance application.

Graphene-CNT nanohybrid aptasensor for label free detection of cardiac biomarker myoglobin

We report a label free electrochemical detection of cardiac bio-marker myoglobin (Mb) on aptamer functionalized rGO/CNT nanostructured electrodes by measuring its direct electron transfer (DET). Configured as a highly responsive aptasensor, the newly developed biosensing platform exhibits synergistic effect of the nano-hybrid functional construct by combining good electrical properties and the facile chemical functionality of nanohybrid for the compatible bio-interface development. The specific anti-Mb aptamer was generated by five iterative SELEX (Systematic evolution of ligands by exponential enrichment) rounds, showing high senstivity (KD ~65 pM). The aptamer functionalized rGO/CNT nanostructured electrodes demonstrated a significant increase in signal response with a detection limit of ~0.34 ng/mL in the dynamic response range between 1 ng/mL and 4 µg/mL for Mb. The newly developed DET assay format presents a promising candidate in point-of-care diagnosis for routine screening of Mb in patient's samples.

Long-range electron transfer with myoglobin immobilized at Au/mixed-SAM junctions: mechanistic impact of the strong protein confinement

Horse muscle myoglobin (Mb) was tightly immobilized at Au-deposited ~15-Å-thick mixed-type (1:1) alkanethiol SAMs, HS-(CH₂)₁₁-COOH/HS-(CH₂)₁₁-OH, and placed in contact with buffered H₂O or D₂O solutions. Fast-scan cyclic voltammetry (CV) and a Marcus-equation-based analysis were applied to determine unimolecular standard rate constants and reorganization free energies for electron transfer (ET), under variable-temperature (15-55 °C) and -pressure (0.01-150 MPa) conditions. The CV signal was surprisingly stable and reproducible even after multiple temperature and pressure cycles. The data analysis revealed the following values: standard rate constant, 33 s⁻¹ (25 °C, 0.01 MPa, H₂O); reorganization free energy, 0.5 ± 0.1 eV (throughout); activation enthalpy, 12 ± 3 kJ mol⁻¹; activation volume, -3.1 ± 0.2 cm³ mol⁻¹; and pH-dependent solvent kinetic isotope effect (k(H)⁰/k(D)⁰), 0.7-1.4. Furthermore, the values for the rate constant and reorganization free energy are very similar to those previously found for cytochrome c electrostatically immobilized at the monocomponent Au/HS-(CH₂)₁₁-COOH junction. In vivo, Mb apparently forms a natural electrostatic complex with cytochrome b₅ (cyt-b₅) through the "dynamic" (loose) docking pattern, allowing for a slow ET that is intrinsically coupled to the water's removal from the "defective" heme iron (altogether shaping the biological repair mechanism for Mb's "met" form). In contrary, our experiments rather mimic the case of a "simple" (tight) docking of the redesigned (mutant) Mb with cyt-b₅ (Nocek et al. J. Am. Chem. Soc. 2010, 132, 6165-6175). According to our analysis, in this configuration, Mb's distal pocket (linked to the "ligand channel") seems to be arrested within the restricted configuration, allowing the rate-determining reversible ET process to be coupled only to the inner-sphere reorganization (minimal elongation/shortening of an Fe-OH₂ bond) rather than the pronounced detachment (rebinding) of water and, hence, to be much faster.

Synthesis of gelatin-stabilized gold nanoparticles and assembly of carboxylic single-walled carbon nanotubes/Au composites for cytosensing and drug uptake

Gelatin-stabilized gold nanoparticles (AuNPs-gelatin) with hydrophilic and biocompatible were prepared with a simple and "green" route by reducing in situ tetrachloroauric acid in gelatin. The nanoparticles showed the excellent colloidal stability. UV-vis spectra, transmission electron microscopy (TEM), and atomic force microscopy revealed the formation of well-dispersed AuNPs with different sizes. By combination of the biocompatibility of AuNPs and excellent conductivity of carboxylic single-walled carbon nanotubes (c-SWNTs), a novel nanocomposite was designed for the immobilization and cytosensing of HL-60 cells at electrodes. The immobilized cells showed sensitive voltammetric response, good activity, and increased electron-transfer resistance. It can be used as a highly sensitive impedance sensor for HL-60 cells ranging from 1 x 10(4) to 1 x 10(7) cell mL(-1) with a limit of detection of 5 x 10(3) cell mL(-1). Moreover, the nanocomposite could effectively facilitate the interaction of adriamycin (ADR) with HL-60 cells and remarkably enhance the permeation and drug uptake of anticancer agents in the cancer cells, which could readily lead to the induction of the cell death of leukemia cells.