Molecular and Electronic Structures, Brönsted Basicities, and Lewis Acidities of Group VIB Transition Metal Oxide Clusters

Reactivity of surface oxygen vacancy sites and frustrated Lewis acid-base pairs of In2O3 catalysts in CO2 hydrogenation

The effects of oxygen vacancy (VO) formation energy and surface frustrated Lewis acid-base pairs (SFLPs) on the CO2 hydrogenation activity of In2O3 catalysts were studied using density functional theory calculations. The VO formation energy of 2.8-3.3 eV was found to favor HCOO formation, whereas the presence of SFLPs is conducive to CO formation.

Binding of SO3 to Group 4 Transition Metal Oxide Nanoclusters

Transition metal oxide (TMO) clusters are being studied for their ability to absorb acid gases generated by energy production processes. The interaction of SO3, a byproduct of common industrial processes, with group 4 metal (Ti, Zr, and Hf) oxide nanoclusters, has been predicted using electronic structure methods. The calculations were done at the density functional theory (DFT) and correlated molecular orbital coupled cluster singles and doubles CCSD(T) theory levels. There is a reasonable agreement between the DFT/ωB97x-D energies with the CCSD(T) results. SO3 is predicted to strongly chemisorb to these clusters, as do NO2 and CO2. For SO3, these chemisorption processes favor binding to TMO clusters as SO42- sulfate in both the terminal and bridging configurations. It is predicted that SO3 fully extracts the bridging oxygen from the TMO lattice to form bridging SO42-. This is favorable because of the lower S-O bond dissociation energy of SO3, whereas other acid gases add across the bridging oxygen because of their higher A-O bond dissociation energy. SO3 is capable of physisorption as long as an exposed metal center is present in the lattice. If a metal center has a terminal oxo-group, then SO3 will prefer the SO42- configuration. An approximately linear relationship exists between the physisorption energy and proton affinity for rows 2 and 3 elements.

Catalytic routes towards polystyrene recycling

Polystyrene (PS) is one of the most popular plastics due to its versatility, which renders it useful for a large variety of applications, including laboratory equipment, insulation and food packaging. However, its recycling is still a challenge, as both mechanical and chemical (thermal) recycling strategies are often cost-prohibitive in comparison to current disposal methods. Therefore, catalytic depolymerization of PS represents the best alternative to overcome these economical drawbacks, since the presence of a catalyst can improve product selectivity for chemical recycling and upcycling of PS. This minireview focuses on the catalytic processes for the production of styrene and other valuable aromatics from PS waste, and it aims to lay the ground for PS recyclability and long-term sustainable PS production.

Tungsten and molybdenum oxide nanostructures: two-dimensional layers and nanoclusters

W- and Mo-oxides form an interesting class of materials, featuring structural complexities, stoichiometric flexibility, and versatile physical and chemical properties that render them attractive for many applications in diverse fields of nanotechnologies. In nanostructured form, novel properties and functionalities emerge as a result of quantum size and confinement effects. In this topical review, W- and Mo-oxide nanosystems are examined with particular emphasis on two-dimensional (2D) layers and small molecular-type clusters. We focus on the epitaxial growth of 2D layers on metal single crystal surfaces and investigate their novel geometries and structures by a surface science approach. The coupling between the oxide overlayer and the metal substrate surface is a decisive element in the formation of the oxide structures and interfacial strain and charge transfer are shown to determine the lowest energy structures. Atomic structure models as determined by density functional theory (DFT) simulations are reported and discussed for various interface situations, with strong and weak coupling. Free-standing (quasi-)2D oxide layers, so-called oxide nanosheets, are attracting a growing interest recently in the applied research community because of their easy synthesis via wet-chemical routes. Although they consist typically of several atomic layers thick-not always homogeneous-platelet systems, their quasi-2D character induces a number of features that make them attractive for optoelectronic, sensor or biotechnological device applications. A brief account of recently published preparation procedures of W- and Mo-oxide nanosheets and some prototypical examples of proof of concept applications are reported here. (MO₃)₃(M = W, Mo) clusters can be generated in the gas phase in nearly monodisperse form by a simple vacuum sublimation technique. These clusters, interesting molecular-type structures by their own account, can be deposited on a solid surface in a controlled way and be condensed into 2D W- and Mo-oxide layers; solid-state chemical reactions with pre-deposited surface oxide layers to form 2D ternary oxide compounds (tungstates, molybdates) have also been reported. The clusters have been proposed as model systems for molecular studies of reactive centres in catalytic reactions. Studies of the catalysis of (MO₃)₃clusters in unsupported and supported forms, using the conversion of alcohols as model reactions, are discussed. Finally, we close with a brief outlook of future perspectives.

Hydrolysis of Small Oxo/Hydroxo Molecules Containing High Oxidation State Actinides (Th, Pa, U, Np, Pu): A Computational Study

The energetics of hydrolysis reactions for high oxidation states of oxo/hydroxo monomeric actinide species (Th^IVO₂, Pa^IVO₂, U^IVO₂, Pa^VO₂(OH), U^VO₂(OH), U^VIO₃, Np^VIO₃, Np^VIIO₃(OH), and Pu^VIIO₃(OH)) were calculated at the CCSD(T) level. The first step is the formation of a Lewis acid/base adduct with H₂O (hydration), followed by a proton transfer to form a dihydroxide molecule (hydrolysis); this process is repeated until all oxo groups are hydrolyzed. The physisorption (hydration) for each H₂O addition was predicted to be exothermic, ca. -20 kcal/mol. The hydrolysis products are preferred energetically over the hydration products for the +IV and +V oxidation states. The compounds with An^VI are a turning point in terms of favoring hydration over hydrolysis. For An^VIIO₃(OH), hydration products are preferred, and only two waters can bind; the complete hydrolysis process is now endothermic, and the oxidation state for the An in An(OH)₇ is +VI with two OH groups each having one-half an electron. The natural bond order charges and the reaction energies provide insights into the nature of the hydrolysis/hydration processes. The actinide charges and bond ionicity generally decrease across the period. The ionic character decreases as the oxidation state and coordination number increase so that covalency increases moving to the right in the actinide period.

Characterization of Uranyl Coordinated by Equatorial Oxygen: Oxo in UO3 versus Oxyl in UO3. J Phys Chem A 2021;125:5544-5555. [PMID: 34138571 DOI: 10.1021/acs.jpca.1c03818]

Uranium trioxide, UO₃, has a T-shaped structure with bent uranyl, UO₂²⁺, coordinated by an equatorial oxo, O^2-. The structure of cation UO₃⁺ is similar but with an equatorial oxyl, O^•-. Neutral and cationic uranium trioxide coordinated by nitrates were characterized by collision induced dissociation (CID), infrared multiple-photon dissociation (IRMPD) spectroscopy, and density functional theory. CID of uranyl nitrate, [UO₂(NO₃)₃]^- (complex A1), eliminates NO₂ to produce nitrate-coordinated UO₃⁺, [UO₂(O^•)(NO₃)₂]^- (B1), which ejects NO₃ to yield UO₃ in [UO₂(O)(NO₃)]^- (C1). Finally, C1 associates with H₂O to afford uranyl hydroxide in [UO₂(OH)₂(NO₃)]^- (D1). IRMPD of B1, C1, and D1 confirms uranyl equatorially coordinated by nitrate(s) along with the following ligands: (B1) radical oxyl O^•-; (C1) oxo O^2-; and (D1) two hydroxyls, OH^-. As the nitrates are bidentate, the equatorial coordination is six in A1, five in B1, four in D1, and three in C1. Ligand congestion in low-coordinate C1 suggests orbital-directed bonding. Hydrolysis of the equatorial oxo in C1 epitomizes the inverse trans influence in UO₃, which is uranyl with inert axial oxos and a reactive equatorial oxo. The uranyl ν₃ IR frequencies indicate the following donor ordering: O^2-[best donor] ≫ O^•-> OH^-> NO₃^-.

Using anion photoelectron spectroscopy of cluster models to gain insights into mechanisms of catalyst-mediated H2 production from water

Metal oxide cluster models of catalyst materials offer a powerful platform for probing the molecular-scale features and interactions that govern catalysis. This perspective gives an overview of studies implementing the combination of anion photoelectron (PE) spectroscopy and density functional theory calculations toward exploring cluster models of metal oxides and metal-oxide supported Pt that catalytically drive the hydrogen evolution reaction (HER) or the water-gas shift reaction. The utility in the combination of these experimental and computational techniques lies in our ability to unambiguously determine electronic and molecular structures, which can then connect to results of reactivity studies. In particular, we focus on the activity of oxygen vacancies modeled by suboxide clusters, the critical mechanistic step of forming proximal metal hydride and hydroxide groups as a prerequisite for H2 production, and the structural features that lead to trapped dihydroxide groups. The pronounced asymmetric oxidation found in heterometallic group 6 oxides and near-neighbor group 5/group 6 results in higher activity toward water, while group 7/group 6 oxides form very specific stoichiometries that suggest facile regeneration. Studies on the trans-periodic combination of cerium oxide and platinum as a model for ceria supported Pt atoms and nanoparticles reveal striking negative charge accumulation by Pt, which, combined with the ionic conductivity of ceria, suggests a mechanism for the exceptionally high activity of this system towards the water-gas shift reaction.

Reaction of NO2 with Groups IV and VI Transition Metal Oxide Clusters

The addition of NO₂ to Group IV (MO₂)_n and Group VI (MO₃)_n (n = 1-3) nanoclusters was studied using both density functional theory (DFT) and coupled cluster theory (CCSD(T)). The structures and overall binding energetics were predicted for Lewis acid-base addition without transfer of spin (a physisorption-type process) and the formation of either cluster-ONO (HONO-like or bidentate bonding) or NO₃^- formation where for both the spin is transferred to the metal oxide clusters (a chemisorption-type process). Only chemisorption of NO₂ is predicted to be thermodynamically allowed at temperatures ≥298 K for Group IV (MO₂)_n clusters with the formation of surface chemisorbed NO₂ being by far the most energetically favorable. The ligand binding energies (LBEs) for physisorption and chemisorption on the TiO₂ nanoclusters are consistent with computational studies of the bulk solids. Chemisorption is only predicted to occur for (CrO₃)_n clusters in the form of a terminal nitrate containing species whereas the larger chemisorbed nitrate structures for (MoO₃)_n and (WO₃)_n were found to be metastable and unlikely to form in any appreciable amount at temperatures of 298 K and higher. NO₂ is predicted to only be capable of physisorbing to (MoO₃)_n and (WO₃)_n at lower temperatures and therefore unlikely to bind NO₂ at temperatures ≥298 K. Correlations between the (MO₃)_nNO₂ ligand bond energies and the chemical properties of the parent (MO₃)_n clusters (Lewis acidity, ionization potentials, excitation energies, and M = O/M-O bond strengths) are described.

Conceptual DFT and TDDFT study on electronic structure and reactivity of pure and sulfur doped (CrO3)n (n = 1-10) clusters

Different isomers of (CrO₃)_n (n = 1-10) cluster units have been investigated using Density functional approach. Their stability and reactivity has been analyzed by plotting chemical potential and HOMO-LUMO gap as a function of cluster size. The CrO₃, (CrO₃)₆ and (CrO₃)₉ are identified as the most reactive species. Reactivity of each atomic site in the cluster has been interpreted using local reactivity descriptors called Fukui Function plots. The clusters have been doped with sulfur by adding it as substitutional impurity, effect of sulfur doping has been understood by analyzing excitation energies and absorption wavelengths using time dependent-DFT(TDDFT) at CAM-B3LYP level of theory.

Gas-Phase Fragmentation of Host-Guest Complexes of Cyclodextrins and Polyoxometalates

Gas-phase fragmentation pathways of host-guest complexes of cyclodextrins (CDs) and polyoxometalates (POMs) were examined using collision-induced dissociation (CID). The host-guest complexes studied here were composed of two different classes of POMs-Keggin (PW₁₂O₄₀^3-) and Lindqvist (M₆O₁₉^2-, M = Mo, W)-and three types of CDs (α-, β-, and γ-CD) differing in the diameter of the inner cavity. The CD-POM complexes were generated either by mixing methanol solutions of POM and CD or through a one-step acidic condensation of tetraoxometalates MO₄^2- (M = Mo, W) with CDs for complexes with Keggin and Lindqvist anions, respectively, and introduced into the gas phase using electrospray ionization (ESI). We observe distinct differences in fragmentation pathways of the complexes of Keggin and Lindqvist POMs under high- and low-energy CID conditions. Specifically, direct dissociation and proton transfer from CD to POM accompanied by the separation of fragments is observed in CID of Keggin CD-POM complexes. In contrast, dissociation of CD complexes with Lindqvist POMs is dominated by the simultaneous loss of multiple water molecules. This unusual fragmentation channel is attributed to dissociation of the POM cluster inside the CD cavity accompanied by covalent bond formation between the fragments and CD and elimination of multiple water molecules. The observed covalent coupling of metal oxide clusters opens up opportunities for derivatization of macrocyclic host molecules using collisional excitation of gaseous non-covalent complexes.

Prediction of Bond Dissociation Energies/Heats of Formation for Diatomic Transition Metal Compounds: CCSD(T) Works

It was recently reported ( J. Chem. Theory Comput. 2015 , 11 , 2036 - 2052 ) that the coupled cluster singles and doubles with perturbative triples method, CCSD(T), should not be used as a benchmark tool for the prediction of dissociation energies (heats of formation) for the first row transition metal diatomics based on a comparison with the experimental thermodynamic values for a set of 20 diatomics. In the present work the bond dissociation energies as well as the heats of formation for those diatomics have been calculated by the Feller-Peterson-Dixon approach at the CCSD(T)/complete basis set (CBS) level of theory including scalar relativistic corrections and correlation of the outer shell of core electrons in addition to the valence electrons. Revised experimental values for the hydrides are presented that are based on new heterolytic R-H bond dissociation energies, which are needed for analysis of the mass spectrometry experiments. The agreement between the calculated bond dissociation energies and the revised experimental values of the hydrides is good. Good agreement of the calculated bond dissociation energies/heats of formation is also found for most of the chlorides, oxides, and sulfides given the experimental error bars from experiment and those of the transition metal atoms in the gas phase. Thus, reliable results can be achieved by the CCSD(T) method at the CBS limit. The use of PW91 orbitals for the CCSD(T) calculations improves the predictions for some compounds with large T₁ diagnostics at the HF-CCSD(T) level. The optimized bond distances and calculated vibrational frequencies for the diatomics also agree well with the available experimental values.

Self-assembly of (WO3)3 clusters on a highly oriented pyrolytic graphite surface and nanowire formation: a combined experimental and theoretical study

Formation of nanostructures from deposition of (WO₃)₃ clusters on HOPG and atomistic modeling of the assembly process of (WO₃)₃ clusters.

A DFT study of (WO3)3 nanoclusters adsorption on defective MgO ultrathin films on Ag(001)

The structures and electronic properties of (WO₃)₃ nanocluster adsorption on defective MgO ultrathin films supported on Ag(001) metal surfaces have been investigated by means of density functional theory (DFT) calculations including dispersion interactions.

In situ solid-state electrochemistry of mass-selected ions at well-defined electrode-electrolyte interfaces

Molecular-level understanding of electrochemical processes occurring at electrode-electrolyte interfaces (EEIs) is key to the rational development of high-performance and sustainable electrochemical technologies. This article reports the development and application of solid-state in situ thin-film electrochemical cells to explore redox and catalytic processes occurring at well-defined EEIs generated using soft-landing (SL) of mass- and charge-selected cluster ions. In situ cells with excellent mass-transfer properties are fabricated using carefully designed nanoporous ionic liquid membranes. SL enables deposition of pure active species that are not obtainable with other techniques onto electrode surfaces with precise control over charge state, composition, and kinetic energy. SL is, therefore, demonstrated to be a unique tool for studying fundamental processes occurring at EEIs. Using an aprotic cell, the effect of charge state ([Formula: see text]) and the contribution of building blocks of Keggin polyoxometalate (POM) clusters to redox processes are characterized by populating EEIs with POM anions generated by electrospray ionization and gas-phase dissociation. Additionally, a proton-conducting cell has been developed to characterize the oxygen reduction activity of bare Pt clusters (Pt₃₀ ∼1 nm diameter), thus demonstrating the capability of the cell for probing catalytic reactions in controlled gaseous environments. By combining the developed in situ electrochemical cell with ion SL we established a versatile method to characterize the EEI in solid-state redox systems and reactive electrochemistry at precisely defined conditions. This capability will advance the molecular-level understanding of processes occurring at EEIs that are critical to many energy-related technologies.

Correlation between the acid-base properties of the La2O3 catalyst and its methane reactivity

Density functional theory and coupled cluster theory calculations were carried out to study the effects of the acid-base properties of the La2O3 catalyst on its catalytic activity in the oxidative coupling of methane (OCM) reaction. The La(3+)-O(2-) pair site for CH4 activation is considered as a Lewis acid-Brönsted base pair. Using the Lewis acidity and the Brönsted basicity in the fluoride affinity and proton affinity scales as quantitative measures of the acid-base properties, the energy barrier for CH4 activation at the pair site can be linearly correlated with these acid-base properties. The pair site consisting of a strong Lewis acid La(3+) site and a strong Brönsted base O(2-) site is the most reactive for CH4 activation. In addition, the basicity of the La2O3 catalyst was traditionally measured by temperature-programmed desorption of CO2, but the CO2 chemisorption energy is better regarded as a combined measure of the acid-base properties of the pair site. A linear relationship of superior quality was found between the energy barrier for CH4 activation and the CO2 chemisorption energy, and the pair site favorable for CO2 chemisorption is also more reactive for CH4 activation, leading to the conflicting role of the "basicity" of the La2O3 catalyst in the OCM reaction. The necessity for very high reaction temperatures in the OCM reaction is rationalized by the requirement for the recovery of the most reactive acid-base pair site, which unfortunately also reacts most readily with the byproduct CO2 to form the very stable CO3(2-) species.

1,2-Ethanediol and 1,3-Propanediol Conversions over (MO3)3 (M = Mo, W) Nanoclusters: A Computational Study

The dehydration and dehydrogenation reactions of one and two 1,2-ethanediol and 1,3-propanediol molecules on (MO3)3 (M = Mo, W) nanoclusters have been studied computationally using density functional and coupled cluster (CCSD(T)) theory. The reactions are initiated by the formation of a Lewis acid-base complex with an additional hydrogen bond. Dehydration is the dominant reaction proceeding via a metal bisdiolate. Acetaldehyde, the major product for 1,2-ethanediol, is produced by α-hydrogen transfer from one CH2 group to the other. For 1,3-propanediol, the C-C bond breaking pathways to produce C2H4 and HCH═O simultaneously and proton transfer to generate propylene oxide have comparable barrier energies. The barrier to produce propanal from the propylene oxide complex is less than that for epoxide release from the cluster. On the Mo3O9 cluster, a redox reaction channel for 1,2-ethanediol to break the C-C bond to form two formaldehyde molecules and then to produce C2H4 is slightly more favorable than the formation of acetaldehyde. For W(VI), the energy barrier for the reduction pathway is larger due to the lower reducibility of W3O9. Similar reduction on Mo(VI) for 1,3-propanediol to form propene is not a favorable pathway compared with the other pathways as additional C-H bond breaking is required in addition to breaking a C-C bond. The dehydrogenation and dehydration activation energies for the selected glycols are larger than the reactions of ethanol and 1-propanol on the same clusters. The CCSD(T) method is required because density functional theory with the M06 and B3LYP functionals does not predict quantitative energies on the potential energy surface. The M06 functional performs better than does the B3LYP functional.

The First Molybdenum(VI) and Tungsten(VI) Oxoazides MO2(N3)2, MO2(N3)2⋅2 CH3CN, (bipy)MO2(N3)2, and [MO2(N3)4](2-) (M=Mo, W)

Molybdenum(VI) and tungsten(VI) dioxodiazide, MO2(N3)2 (M=Mo, W), were prepared through fluoride-azide exchange reactions between MO2F2 and Me3SiN3 in SO2 solution. In acetonitrile solution, the fluoride-azide exchange resulted in the isolation of the adducts MO2(N3)2⋅2 CH3CN. The subsequent reaction of MO2(N3)2 with 2,2'-bipyridine (bipy) gave the bipyridine adducts (bipy)MO2(N3)2. The hydrolysis of (bipy)MoO2(N3)2 resulted in the formation and isolation of [(bipy)MoO2N3]2O. The tetraazido anions [MO2(N3)4](2-) were obtained by the reaction of MO2(N3)2 with two equivalents of ionic azide. Most molybdenum(VI) and tungsten(VI) dioxoazides were fully characterized by their vibrational spectra, impact, friction, and thermal sensitivity data and, in the case of (bipy)MoO2(N3)2, (bipy)WO2(N3)2, [PPh4]2[MoO2(N3)4], [PPh4]2[WO2(N3)4], and [(bipy)MoO2N3]2O by their X-ray crystal structures.

Formation of hexagonal-molybdenum trioxide (h-MoO₃) nanostructures and their pseudocapacitive behavior

The crystallographic structure and morphology of redox active transition metal oxides have a pronounced effect on their electrochemical properties. In this work, h-MoO3 nanostructures with three distinct morphologies, i.e., pyramidal nanorod, prismatic nanorod and hexagonal nanoplate, were synthesized by a facile solvothermal method. The morphologies of h-MoO3 nanostructures were tailored by a controlled amount of hexamethylenetetramine. An enhanced specific capacitance about 230 F g(-1) at an applied current density of 0.25 A g(-1) was achieved in h-MoO3 pyramidal nanorods. Electrochemical studies confirmed that the h-MoO3 pyramidal nanorods exhibit superior charge-storage ability. This improved performance can be ascribed to the coexistence of its well exposed crystallographic planes with abundant active sites, i.e., hexagonal window (HW), trigonal cavity (TC) and four-coordinated square window (SW). The mechanism of charge-storage is likely facilitated by the vehicle mechanism of proton transportation due to the availability of the vehicles, i.e., NH4(+) and H2O. The promising, distinct and unexploited features of h-MoO3 nanostructures reveal a strong candidate for pseudocapacitive electrode materials.

The reactivity of stoichiometric tungsten oxide clusters towards carbon monoxide: the effects of cluster sizes and charge states

Density functional theory (DFT) calculations are employed to investigate the reactivity of tungsten oxide clusters towards carbon monoxide. Extensive structural searches show that all the ground-state structures of (WO3)n(+) (n = 1-4) contain an oxygen radical center with a lengthened W-O bond which is highly active in the oxidation of carbon monoxide. Energy profiles are calculated to determine the reaction mechanisms and evaluate the effect of cluster sizes. The monomer WO3(+) has the highest reactivity among the stoichiometric clusters of different sizes (WO3)n(+) (n = 1-4). The reaction mechanisms for CO with mono-nuclear stoichiometric tungsten oxide clusters with different charges (WO3(-/0/+)) are also studied to clarify the influence of charge states. Our calculated results show that the ability to oxidize CO gets weaker from WO3(+) to WO3(-) as the negative charge accumulates progressively.

On the mechanism of catalytic hydrogenation of thiophene on hydrogen tungsten bronze

Thiophene can be hydrogenated to tetrahydrothiophene on a hydrogen tungsten bronze surface with low activation energy.

Hydroxyl migration in heterotrimetallic clusters: an assessment of fluxionality pathways

Water splitting at the unsaturated metal center and subsequent hydroxyl migration are key steps toward successful H2 liberation from cheap and abundant water using transition metal cluster anions. In this report we initiate a theoretical study (DFT) to assess the efficacy of heterometallic cores instead of the widely studied and well established homometallic cores. To accomplish this goal, one tungsten center in W3O6(-) core has been replaced by different transition metals such as titanium, technetium, and osmium. Introduction of the heterometal makes the core asymmetric and electronically anisotropic. To evaluate the efficiency of these heterometallic cores, fluxionality pathways for hydroxyl migration have been studied in detail. We show that the cores W2TcO6(-) (2) and W2OsO6(-) (3) can exhibit fluxionality for hydroxyl migration and thus can potentially facilitate H2 liberation from H2O. Notably, a new class of low-energy structures generated upon oxide bridge opening process and subsequent structural rearrangement facilitates the hydroxyl migration event. To illustrate the heterometallic effect further, we show that previously inaccessible energy barriers for hydroxyl migration in a homometallic trimolybdenum core become energetically achievable when one of the metals is replaced by a 5d element osmium.

Dehydration, dehydrogenation, and condensation of alcohols on supported oxide catalysts based on cyclic (WO3)3 and (MoO3)3 clusters

The review summarizes recent synthesis and reactivity studies of model oxide catalysts prepared by the deposition of gas phase cyclic (WO₃)₃ and (MoO₃)₃ clusters.