Methane oxidation mechanism on Pt(111): a cluster model DFT study

Phenol hydrogenation over H-MFI zeolite encapsulated platinum nanocluster catalyst

The development of catalysts with high activity and selectivity is of paramount importance for the industrial conversion of biomass. One crucial reaction in this process is the hydrogenation of phenol, a key component of phenolic resins in biomass, into cyclohexanone and cyclohexanol. In this study, density functional theory (DFT) calculations were utilized to examine phenol hydrogenation reaction mechanisms over a platinum (Pt) nanocluster encapsulated in the H-MFI zeolite, e.g., Pt6@H-MFI. Various anchoring positions of the Pt6 nanocluster on the H-MFI framework and the adsorption configurations of phenol on the Pt6@H-MFI were firstly determined. DFT calculation results demonstrate that, compared to the Pt surface, the Pt6@H-MFI catalyst shows high hydrogenation activity with a notable selectivity towards cyclohexanol. The pathway leading to the formation of cyclohexanol is both kinetically and thermodynamically more favorable over the pathway leading to the formation of cyclohexanone. The present work offers significant contributions to the strategic development of catalysts consisting of metal nanoclusters encapsulated within zeolite frameworks.

Methane Oxidation to Methanol

The direct transformation of methane to methanol remains a significant challenge for operation at a larger scale. Central to this challenge is the low reactivity of methane at conditions that can facilitate product recovery. This review discusses the issue through examination of several promising routes to methanol and an evaluation of performance targets that are required to develop the process at scale. We explore the methods currently used, the emergence of active heterogeneous catalysts and their design and reaction mechanisms and provide a critical perspective on future operation. Initial experiments are discussed where identification of gas phase radical chemistry limited further development by this approach. Subsequently, a new class of catalytic materials based on natural systems such as iron or copper containing zeolites were explored at milder conditions. The key issues of these technologies are low methane conversion and often significant overoxidation of products. Despite this, interest remains high in this reaction and the wider appeal of an effective route to key products from C-H activation, particularly with the need to transition to net carbon zero with new routes from renewable methane sources is exciting.

Theoretical characterization of zeolite encapsulated platinum clusters in the presence of water molecules

Zeolite encapsulated metal clusters have shown high catalytic activity and superior stability due to confinement effects, the synergy between acidic and metal active sites, and strong metal-zeolite interactions. In the present work, density functional theory calculations were employed to study the stability of encapsulated Pt_n (n = 1-6) clusters in the zeolitic frameworks including Silicalite-1 and H-MFI. It has been found that the metal-zeolite interaction becomes stronger with the increasing Pt_n cluster size for both zeolitic frameworks. The encapsulated Pt_n clusters in the vicinity of the Brønsted acid site (BAS) of H-MFI form more stable Pt_nH_x (x = 1, 2) clusters. The presence of water molecules around the encapsulated Pt₆ cluster further enhances its stability, while the oxidation states of the encapsulated Pt_n cluster are largely affected by the BAS site and the surrounding water molecules. As the water concentration increases, water dissociation becomes more facile on the Pt₆@Silicalite-1 cluster while an opposite trend is found over the Pt₆H₂@H-MFI cluster. The proton of the BAS site can be transferred to the encapsulated Pt₆ cluster via a hydronium cluster H⁺(H₂O)_n, leading to the formation of the Pt₆H₂@H-MFI cluster.

A Perspective on Modelling Metallic Magnetic Nanoparticles in Biomedicine: From Monometals to Nanoalloys and Ligand-Protected Particles

The focus of this review is on the physical and magnetic properties that are related to the efficiency of monometallic magnetic nanoparticles used in biomedical applications, such as magnetic resonance imaging (MRI) or magnetic nanoparticle hyperthermia, and how to model these by theoretical methods, where the discussion is based on the example of cobalt nanoparticles. Different simulation systems (cluster, extended slab, and nanoparticle models) are critically appraised for their efficacy in the determination of reactivity, magnetic behaviour, and ligand-induced modifications of relevant properties. Simulations of the effects of nanoscale alloying with other metallic phases are also briefly reviewed.

Fundamental insight into electrochemical oxidation of methane towards methanol on transition metal oxides

Electrochemical oxidation of CH₄ is known to be inefficient in aqueous electrolytes. The lower activity of methane oxidation reaction (MOR) is primarily attributed to the dominant oxygen evolution reaction (OER) and the higher barrier for CH₄ activation on transition metal oxides (TMOs). However, a satisfactory explanation for the origins of such lower activity of MOR on TMOs, along with the enabling strategies to partially oxidize CH₄ to CH₃OH, have not been developed yet. We report here the activation of CH₄ is governed by a previously unrecognized consequence of electrostatic (or Madelung) potential of metal atom in TMOs. The measured binding energies of CH₄ on 12 different TMOs scale linearly with the Madelung potentials of the metal in the TMOs. The MOR active TMOs are the ones with higher CH₄ binding energy and lower Madelung potential. Out of 12 TMOs studied here, only TiO₂, IrO₂, PbO₂, and PtO₂ are active for MOR, where the stable active site is the O on top of the metal in TMOs. The reaction pathway for MOR proceeds primarily through *CH _x intermediates at lower potentials and through *CH₃OH intermediates at higher potentials. The key MOR intermediate *CH₃OH is identified on TiO₂ under operando conditions at higher potential using transient open-circuit potential measurement. To minimize the overoxidation of *CH₃OH, a bimetallic Cu₂O₃ on TiO₂ catalysts is developed, in which Cu reduces the barrier for the reaction of *CH₃ and *OH and facilitates the desorption of *CH₃OH. The highest faradaic efficiency of 6% is obtained using Cu-Ti bimetallic TMO.

Comparison study of the effect of CeO2-based carrier materials on the total oxidation of CO, methane, and propane over RuO2

While activity and kinetics of catalytic CO and propane combustion over RuO2 depends sensitively on the carrier material, methane combustion on RuO2 is hardly affected by the carrier.

Oxidation of methane to methanol over Pd@Pt nanoparticles under mild conditions in water

Pd@Pt core–shell colloidal nanoparticles efficiently catalyse the direct oxidation of methane to methanol with high selectivity using H₂O₂ in water.

Mechanistic insight into H2-mediated Ni surface diffusion and deposition to form branched Ni nanocrystals: a theoretical study

Present work systematically investigates the kinetic role played by H2 molecules during Ni surface diffusion and deposition to generate branched Ni nanostructures by employing Density Functional Theory (DFT) calculations and ab initio molecule dynamic (AIMD) simulations, respectively. The Ni surface diffusion results unravel that in comparison to the scenarios of Ni(110) and Ni(100), both the subsurface and surface H hinder the Ni surface diffusion over Ni(111) especially under the surface H coverage of 1.5 ML displaying the lowest Ds values, which greatly favors the trapping of the adatom Ni and subsequent overgrowth along the 111 direction. The Ni deposition simulations by AIMD further suggest that both the H2 molecule (in solution) and surface dissociatively adsorbed atomic H can promote Ni depositions onto Ni(111) and Ni(110) facets in a liquid solution. Moreover, a cooperation effect between H2 molecules and surface atomic H can be clearly observed, which greatly favors Ni depositions. Additionally, in addition to working as the solvent, the liquid C2H5OH can also interact with the Ni(111) surface to produce the surface atomic H, which then favored the Ni deposition. Finally, the Ni deposition rate predicted using the deposition constant (Ddep) was found to be much higher than its surface diffusion rate predicted using Ds for Ni(111) and Ni(110), which quantitatively verified the overgrowth along the 111 and 110 directions to produce the branched Ni nanostructures.

Demystifying the Atomistic Origin of the Electric Field Effect on Methane Oxidation

Understanding the role of an electric field on the surface of a catalyst is crucial in tuning and promoting the catalytic activity of metals. Herein, we evaluate the oxidation of methane over a Pt surface with varying oxygen coverage using density functional theory. The latter is controlled by the electrode polarization, giving rise to the non-Faradaic modification of catalytic activity phenomenon. At -1 V, the Pt(111) surface is present, while at 1 V, α-PtO₂ on Pt(111) takes over. Our results demonstrate that the alteration of the platinum oxide surface under the influence of an electrochemical potential promotes the catalytic activity of the metal oxides by lowering the activation energy barrier of the reaction.

The Comparison between Single Atom Catalysis and Surface Organometallic Catalysis

Single atom catalysis (SAC) is a recent discipline of heterogeneous catalysis for which a single atom on a surface is able to carry out various catalytic reactions. A kind of revolution in heterogeneous catalysis by metals for which it was assumed that specific sites or defects of a nanoparticle were necessary to activate substrates in catalytic reactions. In another extreme of the spectrum, surface organometallic chemistry (SOMC), and, by extension, surface organometallic catalysis (SOMCat), have demonstrated that single atoms on a surface, but this time with specific ligands, could lead to a more predictive approach in heterogeneous catalysis. The predictive character of SOMCat was just the result of intuitive mechanisms derived from the elementary steps of molecular chemistry. This review article will compare the aspects of single atom catalysis and surface organometallic catalysis by considering several specific catalytic reactions, some of which exist for both fields, whereas others might see mutual overlap in the future. After a definition of both domains, a detailed approach of the methods, mostly modeling and spectroscopy, will be followed by a detailed analysis of catalytic reactions: hydrogenation, dehydrogenation, hydrogenolysis, oxidative dehydrogenation, alkane and cycloalkane metathesis, methane activation, metathetic oxidation, CO₂ activation to cyclic carbonates, imine metathesis, and selective catalytic reduction (SCR) reactions. A prospective resulting from present knowledge is showing the emergence of a new discipline from the overlap between the two areas.

Tuning the Catalytic Activity of Pd x Ni y (x + y = 6) Bimetallic Clusters for Hydrogen Dissociative Chemisorption and Desorption

Density functional theory was used to study dissociative chemisorption and desorption on Pd _x Ni _y (x + y = 6) bimetallic clusters. The H₂ dissociative chemisorption energies and the H desorption energies at full H saturation were computed. It was found that bimetallic clusters tend to have higher chemisorption energy than pure clusters, and the capacity of Pd₃Ni₃ and Pd₂Ni₄ clusters to adsorb H atoms is substantially higher than that of other clusters. The H desorption energies of Pd₃Ni₃ and Pd₂Ni₄ are also lower than that of the Pd₆ cluster and comparable to that of the Ni₆ cluster, indicating that it is easier to pull the H atom out of these bimetallic catalysts. This suggests that the catalytic efficiency for specific Pd _x Ni _y bimetallic clusters may be superior to bare Ni or Pd clusters and that it may be possible to tune bimetallic nanoparticles to obtain better catalytic performance.

Unraveling the mysterious failure of Cu/SAPO-34 selective catalytic reduction catalysts

Commercial Cu/SAPO-34 selective catalytic reduction (SCR) catalysts have experienced unexpected and quite perplexing failure. Understanding the causes at an atomic level is vital for the synthesis of more robust Cu/SAPO-34 catalysts. Here we show, via application of model catalysts with homogeneously dispersed isolated Cu ions, that Cu transformations resulting from low-temperature hydrothermal aging and ambient temperature storage can be semi-quantitatively probed with 2-dimensional pulsed electron paramagnetic resonance. Coupled with kinetics, additional material characterizations and DFT simulations, we propose the following catalyst deactivation steps: (1) detachment of Cu(II) ions from cationic positions in the form of Cu(OH)₂; (2) irreversible hydrolysis of the SAPO-34 framework forming terminal Al species; and (3) interaction between Cu(OH)₂ and terminal Al species forming SCR inactive, Cu-aluminate like species. Especially significant is that these reactions are greatly facilitated by condensed water molecules under wet ambient conditions, causing low temperature failure of the commercial Cu/SAPO-34 catalysts.

Understanding the failure of commercial Cu/SAPO-34 selective catalytic reduction (SCR) catalysts at an atomic level is vital for the synthesis of more robust catalysts. Here the authors unravel the mysterious failure of Cu/SAPO-34 SCR catalysts via application of model catalysts and 2-dimensional pulsed electron paramagnetic resonance

Cyclic-Voltammetry-Based Solid-State Gas Sensor for Methane and Other VOC Detection

We present the fabrication, characterization, and testing of an electrochemical volatile organic compound (VOC) sensor operating in gaseous conditions at room temperature. It is designed to be microfabricated and to prove the sensing principle based on cyclic voltammetry (CV). It is composed of a working electrode (WE), a counter electrode (CE), a reference electrode (RE), and a Nafion solid-state electrolyte. Nafion is a polymer that conducts protons (H⁺) generated from redox reactions from the WE to the CE. The sensor needs to be activated prior to exposure to gases, which consists of hydrating the Nafion layer to enable its ion conduction properties. During testing, we have shown that our sensor is not only capable of detecting methane, but it can also quantify its concentration in the gas flow as well as differentiate its signal from carbon monoxide (CO). These results have been confirmed by exposing the sensor to two different concentrations of methane (50% and 10% of methane diluted in N₂), as well as pure CO. Although the signal is positioned in the H_ads region of Pt, because of thermodynamic reasons it cannot be directly attributed to methane oxidation into CO₂. However, its consistency suggests the presence of a methane-related oxidation process that can be used for detection, identification, and quantification purposes.

Entrapped Single Tungstate Site in Zeolite for Cooperative Catalysis of Olefin Metathesis with Brønsted Acid Site

Industrial olefin metathesis catalysts generally suffer from low reaction rates and require harsh reaction conditions for moderate activities. This is due to their inability to prevent metathesis active sites (MASs) from aggregation and their intrinsic poor adsorption and activation of olefin molecules. Here, isolated tungstate species as single molecular MASs are immobilized inside zeolite pores by Brønsted acid sites (BASs) on the inner surface. It is demonstrated that unoccupied BASs in atomic proximity to MASs enhance olefin adsorption and facilitate the formation of metallocycle intermediates in a stereospecific manner. Thus, effective cooperative catalysis takes place over the BAS-MAS pair inside the zeolite cavity. In consequence, for the cross-metathesis of ethene and trans-2-butene to propene, under mild reaction conditions, the propene production rate over WO _x/USY is ca. 7300 times that over the industrial WO₃/SiO₂-based catalyst. A propene yield up to 79% (80% selectivity) without observable deactivation was obtained over WO _x/USY for a wide range of reaction conditions.

Fundamental limitation of electrocatalytic methane conversion to methanol

The electrochemical oxidation of methane to methanol at remote oil fields where methane is flared is the ultimate solution to harness this valuable energy resource. In this study we identify a fundamental surface catalytic limitation of this process in terms of a compromise between selectivity and activity, as oxygen evolution is a competing reaction. By investigating two classes of materials, rutile oxides and two-dimensional transition metal nitrides and carbides (MXenes), we find a linear relationship between the energy needed to activate methane, i.e. to break the first C-H bond, and oxygen binding energies on the surface. Based on a simple kinetic model we can conclude that in order to obtain sufficient activity oxygen has to bind weakly to the surface but there is an upper limit to retain selectivity. Few potentially interesting candidates are found but this relatively simple description enables future large scale screening studies for more optimal candidates.

Pt/Cu single-atom alloys as coke-resistant catalysts for efficient C-H activation

The recent availability of shale gas has led to a renewed interest in C-H bond activation as the first step towards the synthesis of fuels and fine chemicals. Heterogeneous catalysts based on Ni and Pt can perform this chemistry, but deactivate easily due to coke formation. Cu-based catalysts are not practical due to high C-H activation barriers, but their weaker binding to adsorbates offers resilience to coking. Using Pt/Cu single-atom alloys (SAAs), we examine C-H activation in a number of systems including methyl groups, methane and butane using a combination of simulations, surface science and catalysis studies. We find that Pt/Cu SAAs activate C-H bonds more efficiently than Cu, are stable for days under realistic operating conditions, and avoid the problem of coking typically encountered with Pt. Pt/Cu SAAs therefore offer a new approach to coke-resistant C-H activation chemistry, with the added economic benefit that the precious metal is diluted at the atomic limit.

First principles prediction of CH4 reactivities with Co3O4 nanocatalysts of different morphologies

Co₃O₄ nanocatalysts have been experimentally shown to have excellent performance in catalyzing CH₄ combustion. These nanocatalysts of different morphologies, such as nanoparticle/nanocube, nanorod/nanobelt, and nanoplate/nanosheet, were previously synthesized and characterized to mainly expose the (001), (011), and (112) surfaces, respectively, with distinct reactivities. In this study, rigorous first principles calculations were performed to investigate CH₄ reactivities of the above Co₃O₄ surfaces of different terminations. CH₄ dissociation was predicted to occur at the Co-O pair site on these surfaces. For each surface, the most reactive Co-O pair site was identified based on calculated energy barriers of the different active sites, which should contribute most significantly to the reactivity of that surface. The lowest energy barriers for the (001), (011), and (112) surfaces were predicted to be 0.96, 0.90, and 0.79 eV, respectively, suggesting CH₄ reactivity to increase in that order for the different Co₃O₄ surfaces, consistent with the trend found experimentally for Co₃O₄ nanocatalysts of different morphologies. Direct comparison between the estimated and experimental CH₄ reaction rates per gram of the nanocatalysts at 325 °C further indicate that their relative ratios were well reproduced by considering three main factors: the effective energy barrier for CH₄ dissociation, the surface area of the nanocatalyst, and the number of independent active sites per unit surface area. The important influence of surface area on CH₄ reactivity is also demonstrated by the significant difference in the reactivities of the nanocatalysts when exposing the same facet but with distinct surface areas.

Enhancing the catalytic activity of hydronium ions through constrained environments

The dehydration of alcohols is involved in many organic conversions but has to overcome high free-energy barriers in water. Here we demonstrate that hydronium ions confined in the nanopores of zeolite HBEA catalyse aqueous phase dehydration of cyclohexanol at a rate significantly higher than hydronium ions in water. This rate enhancement is not related to a shift in mechanism; for both cases, the dehydration of cyclohexanol occurs via an E1 mechanism with the cleavage of C_β–H bond being rate determining. The higher activity of hydronium ions in zeolites is caused by the enhanced association between the hydronium ion and the alcohol, as well as a higher intrinsic rate constant in the constrained environments compared with water. The higher rate constant is caused by a greater entropy of activation rather than a lower enthalpy of activation. These insights should allow us to understand and predict similar processes in confined spaces.

Alcohol dehydration can be challenging in aqueous phase. Here the authors show that hydronium ions confined with zeolite pores catalyse alcohol dehydration at a significantly increased rate relative to aqueous phase hydronium ions, driven by an increased association between the ion and alcohol and a greater entropy of activation.

Density functional theory studies on the skeletal isomerization of 1-butene catalyzed by HZSM-23 and HZSM-48 zeolites

This work reveals the topological effect of zeolites on both enthalpy and entropy of skeletal isomerization of 1-butene.

Catalytic conversion of CHx and CO2 on non-noble metallic impurities in graphene

Density functional theory (DFT) was applied to investigate the geometric, electronic, and magnetic properties of CHx (x = 0, 1, 2, 3, 4) species on non-noble metal embedded graphene (NNM-graphene). It was found that the different stabilities of CHx species can modify the electronic structures and magnetic properties of NNM-graphene systems. The carbonaceous reforming reactions include conversion of CHx (x = 0, 1, 2 and 3) species by hydrogen molecules (H2) to form CHx+2 species or oxidation of C atoms by oxygen molecules to form CO2. In the hydrogenation reactions, deposited C atoms can be converted easily into CHx species overcoming small energy barriers. In comparison, coadsorption of C and O2 to generate CO2 encounters relatively larger energy barriers on the NNM-graphene. Hence, the coadsorption of CHx and H2 as the starting state is energetically more favorable and formation of CHx species can reduce amounts of carbon deposition. Among the NNM-graphene substrates studied, moderate adsorption energies and low reaction barriers of CHx species are more likely to occur on the Co-graphene surface, thus the hydrogenation reaction is able to inhibit carbon deposition on the NNM-graphene surface while maintaining high activity.

Density-functional calculations of the conversion of methane to methanol on platinum-decorated sheets of graphene oxide

The calculated optimum potential-energy diagram of methane conversion on (a) Pt₂/GO, (b) Pt₂O/GO, and (c) Pt₂O₂/GO sheets.