Enthalpies of Formation, Bond Dissociation Energies, and Molecular Structures of the n-Aldehydes (Acetaldehyde, Propanal, Butanal, Pentanal, Hexanal, and Heptanal) and Their Radicals

Generation and Radical-Radical Cross-Coupling of Alkenyloxy Radical

Alkene-attached oxygen radicals are rarely used, as highly reactive oxygen radicals are incompatible with the alkene moiety. The direct radical-radical cross-coupling of O radicals is also challenging (limited to N-O bond formation) because of the lack of suitable persistent radical species. This study demonstrated the feasibility of using Breslow intermediate radical (BIR) as a persistent radical to capture unstable π-conjugated O radicals and allow the C-O radical-radical cross-coupling.

Visible-Light/Nickel-Catalyzed Carboxylation of C(sp2) Bromides via Formate Activation

A new visible-light-driven method for the carboxylation of (hetero)aryl/vinyl bromides has been developed using catalytic 4CzIPN, nickel, phenyl triflimide, and sodium formate as a carboxylation agent. Interestingly, we found catalytic phenyl triflimide plays an essential role in promoting the reaction. While many C(sp²) carboxylation reactions require harsh reagents or gaseous carbon dioxide, we demonstrate the mild and facile construction of carboxylic acids from readily available starting materials.

VUV/UV oxidation performance for the elimination of recalcitrant aldehydes in water and its variation along the light-path

Vacuum ultraviolet/ultraviolet (VUV/UV) oxidation using a low-pressure mercury lamp emitting dual wavelengths (185 nm (VUV) and 254 nm (UV)) significantly varies in performance along the light-path (l_P), which has not been fully characterized. Therefore, VUV/UV oxidation in solution was investigated at various l_P in terms of the degradation kinetics and mineralization pathway of representative aldehydes with various alkyl-chain lengths. Oxidative degradation of parent aldehydes with shorter alkyl chains was less efficient, specifically the pseudo-zero-order rate constant (k_obs) of formaldehyde was only 51% of that of propionaldehyde (k_obs = 0.078 μM s^-1). In contrast, the mineralization of aldehydes with longer alkyl chains was less efficient because these aldehydes underwent mineralization into more refractory carboxylic byproducts, e.g., oxalic acid. VUV was mainly absorbed by superficial water (l_P < 0.55 cm), which resulted in highly heterogeneous oxidation in homogeneous water. Thus, k_obs of acetaldehyde dramatically decreased from 0.13 to 0.033 μM s^-1 as the total l_P of solution increased from 1.0 to 3.0 cm. On the basis of mineralization pathways proposed above, an iterative kinetic model was developed to characterize the degradation of parent aldehydes and the formation of carboxylic acids along l_P. This model predicted the VUV/UV oxidaton for the first time by considering the fast diffusion of pollutants by limited diffusion of transient radical species. Thus, it realized the prediction of ^•OH concentration at specific water solution and byproduct evolution within specific water solution in turbulent flow regime, wherein ^•OH was predominantly formed in superficial water-layers wherein ^•OH in water-layers of l_P <0.16 cm and <0.81 cm contributed to 50% and 90% of the total oxidation performance, respectively. This result would help to improve the VUV-UV-reactor design in terms of optimizing the thickness of water-layer and turbulence of water-flow.

Quality Change in Camellia Oil during Intermittent Frying

Camellia oil with a high oleic acid content is widely used for frying. To comprehensively describe the quality change in camellia oil during frying, the changes in composition, deterioration indicators, and volatile profiles were investigated. The results showed that tocopherols mainly degraded in the early stage of frying, followed by unsaturated fatty acids (UFA). This caused the carbonyl value and total polar compounds level to significantly increase. Moreover, frying promoted the accumulation of volatile compounds in terms of type and abundance, especially aldehydes, which are related to the degradation of UFA. Principal component analysis showed that the frying of camellia oil was divided into three stages. First, the camellia oil with a heating time of 2.5-7.5 h showed excellent quality, where tocopherol played a major role in preventing the loss of UFA and was in the degradation acceleration stage. Subsequently, as tocopherol entered the degradation deceleration stage, the quality of camellia oil heated for 10.0-15.0 h presented a transition from good to deteriorated. Finally, tocopherol entered the degradation stagnation stage, and the quality of camellia oil heated for 17.5-25.0 h gradually deteriorated, accompanied by a high level of volatile compounds and deterioration indicators. Overall, this work comprehensively determined the deterioration of camellia oil during intermittent frying and offered valuable insights for its quality evaluation.

Photoredox-Catalyzed C-H Functionalization Reactions

The fields of C-H functionalization and photoredox catalysis have garnered enormous interest and utility in the past several decades. Many different scientific disciplines have relied on C-H functionalization and photoredox strategies including natural product synthesis, drug discovery, radiolabeling, bioconjugation, materials, and fine chemical synthesis. In this Review, we highlight the use of photoredox catalysis in C-H functionalization reactions. We separate the review into inorganic/organometallic photoredox catalysts and organic-based photoredox catalytic systems. Further subdivision by reaction class─either sp2 or sp3 C-H functionalization─lends perspective and tactical strategies for use of these methods in synthetic applications.

Quantifying acetaldehyde in astronomical ices and laboratory analogues: IR spectra, intensities, 13C shifts, and radiation chemistry

Acetaldehyde is of interest to astrochemists for its relevance to both interstellar and cometary chemistry, but little infrared (IR) spectral data have been published for the solid phases of this compound. Here we present IR spectra of three forms of solid acetaldehyde, with spectra for one form being published for the first time. Direct measurements of band strengths and absorption coefficients also are reported for the first time for amorphous aldehyde, the form of greatest interest for astrochemical work. An acetaldehyde band strength at ~1350 cm-1 that has been used as a reference for about 20 years is seen to be in error by about 80% when compared to the direct measurements presented here. Spectra and peak positions also are presented for H13C(O)13CH3, and then used for the first identification of ketene as a radiation product of solid acetaldehyde.

Temperature Dependence of the Reaction of Chlorine Atoms with CH3OH and CH3CHO

Rate constants of the reactions Cl + CH₃OH → CH₂OH + HCl ( k₁) and Cl + CH₃CHO → CH₃C(O) + HCl ( k₃) were measured at 100 Torr over the temperature range 230.3-297.1 K. Radical chemistry was initiated by pulsed laser photolysis of Cl₂ in mixtures of CH₃OH and CH₃CHO in a flow reactor. Heterodyne near-IR wavelength modulation spectroscopy was used to directly detect HO₂ produced from the subsequent reaction of CH₂OH with O₂ in real time to determine the rate of reaction of Cl with CH₃OH. The rate of Cl + CH₃CHO was measured relative to that of the Cl + CH₃OH reaction. Secondary chemistry, including that of the adducts HO₂·CH₃OH and HO₂·CH₃CHO, was taken into account. The Arrhenius expressions were found to be k₁( T) = 5.02_-1.5^+1.8 × 10^-11 exp[(20 ± 88)/ T] cm³ molecule^-1 s^-1 and k₃( T) = 6.38_-2.0^+2.4 × 10^-11 exp[(56 ± 90)/ T] cm³ molecule^-1 s^-1 (2σ uncertainties). The average values of the rate constants over this temperature range were k₁ = (5.45 ± 0.37) × 10^-11 cm³ molecule^-1 s^-1 and k₃ = (8.00 ± 1.27) × 10^-11 cm³ molecule^-1 s^-1 (2σ uncertainties), consistent with current literature values.

Low Temperature Oxidation of Cyclohexane: Uncertainty of Important Thermo-Chemical Properties

The study of the standard formation enthalpy, entropy, and heat capacity for key species relevant to the low-temperature combustion of cyclohexane has been performed by applying the group additivity method of Benson. The properties of 18 Benson groups (8 of them for the first time), and 10 ring correction factors for cyclic species were estimated through different empirical and semi-empirical methods. The method validation proceeded through comparison of predicted values for certain number of newly estimated groups and available literature data derived from quantum chemistry estimations. Further validations of the estimated properties of groups have been provided by comparing estimated properties of test species with data in literature and kinetic databases. Also the standard deviation between prediction and reported values has been evaluated for each validation case. A similar approach has been applied for validation of the estimated ring correction groups. For selected well-studied cyclic molecules the predicted values and the literature data have been compared with each other, and the standard deviations have been also reported. The evaluated properties of the cyclohexane relevant species were also compared with similar ones available in other kinetic models and in databases. At the end the estimated properties have been presented in a tabulated form of NASA polynomial coefficients with extrapolation up to 3500 K.

Characterization of 1,2-Propanediol Dehydratases Reveals Distinct Mechanisms for B12-Dependent and Glycyl Radical Enzymes

Propanediol dehydratase (PD), a recently characterized member of the glycyl radical enzyme (GRE) family, uses protein-based radicals to catalyze the chemically challenging dehydration of ( S)-1,2-propanediol. This transformation is also performed by the well-studied enzyme B₁₂-dependent propanediol dehydratase (B₁₂-PD) using an adenosylcobalamin cofactor. Despite the prominence of PD in anaerobic microorganisms, it remains unclear if the mechanism of this enzyme is similar to that of B₁₂-PD. Here we report ¹⁸O labeling experiments that suggest PD and B₁₂-PD employ distinct mechanisms. Unlike B₁₂-PD, PD appears to catalyze the direct elimination of a hydroxyl group from an initially formed substrate-based radical, avoiding the generation of a 1,1- gem diol intermediate. Our studies provide further insights into how GREs perform elimination chemistry and highlight how nature has evolved diverse strategies for catalyzing challenging reactions.

Shock Tube Measurement for the Dissociation Rate Constant of Acetaldehyde Using Sensitive CO Diagnostics

The rate constant of acetaldehyde thermal dissociation, CH3CHO = CH3 + HCO, was measured behind reflected shock waves at temperatures of 1273-1618 K and pressures near 1.6 and 0.34 atm. The current measurement utilized sensitive CO diagnostics to track the dissociation of CH3CHO via oxygen atom balance and inferred the title rate constant (k1) from CO time histories obtained in pyrolysis experiments of 1000 and 50 ppm of CH3CHO/Ar mixtures. By using dilute test mixtures, the current study successfully suppressed the interferences from secondary reactions and directly determined the title rate constant as k1(1.6 atm) = 1.1 × 10(14) exp(-36 700 K/T) s(-1) over 1273-1618 K and k1(0.34 atm) = 5.5 × 10(12) exp(-32 900 K/T) s(-1) over 1377-1571 K, with 2σ uncertainties of approximately ±30% for both expressions. Example simulations of existing reaction mechanisms updated with the current values of k1 demonstrated substantial improvements with regards to the acetaldehyde pyrolysis chemistry.

Carbon-Carbon Bond Formation and Hydrogen Production in the Ketonization of Aldehydes

Aldehydes possess relatively high chemical energy, which is the driving force for disproportionation reactions such as Cannizzaro and Tishchenko reactions. Generally, this energy is wasted if aldehydes are transformed into carboxylic acids with a sacrificial oxidant. Here, we describe a cascade reaction in which the surplus energy of the transformation is liberated as molecular hydrogen for the oxidation of heptanal to heptanoic acid by water, and the carboxylic acid is transformed into potentially industrially relevant symmetrical ketones by ketonic decarboxylation. The cascade reaction is catalyzed by monoclinic zirconium oxide (m-ZrO2 ). The reaction mechanism has been studied through cross-coupling experiments between different aldehydes and acids, and the final symmetrical ketones are formed by a reaction pathway that involves the previously formed carboxylic acids. Isotopic studies indicate that the carboxylic acid can be formed by a hydride shift from the adsorbed aldehyde on the metal oxide surface in the absence of noble metals.

Thermochemistry and Kinetic Analysis of the Unimolecular Oxiranyl Radical Dissociation Reaction: A Theoretical Study

Oxirane structures are important in organic synthesis, and they are important initial products in the oxidation reactions of alkyl radicals. The thermochemical properties (enthalpy of formation, entropy, and heat capacity) for the reaction steps of the unimolecular oxiranyl radical dissociation reaction are determined and compared with the available literature. The overall ring opening and subsequent steps involve four types of reactions: β-scission ring opening, intramolecular hydrogen transfer, β-scission hydrogen elimination, and β-scission methyl radical elimination. The enthalpies of formation of the transition states are determined and evaluated using six popular Density Functional Theory (DFT) calculation methods (B3LYP, B2PLYP, M06, M06-2X, ωB97X, ωB97XD), each combined with three different basis sets. The DFT enthalpy values are compared with five composite calculation methods (G3, G4, CBS-QB3, CBS-APNO, W1U), and by CCSD(T)/aug-cc-pVTZ. Kinetic parameters are determined versus pressure and temperature for the unimolecular dissociation pathways of an oxiranyl radical, which include the chemical activation reactions of the ring-opened oxiranyl radical relative to the ring-opening barrier. Multifrequency quantum Rice Ramsperger Kassel (QRRK) analysis is used to determine k(E) with master equation analysis for falloff. The major overall reaction pathway at lower combustion temperatures is oxiranyl radical dissociation to a methyl radical and carbon monoxide. Oxiranyl radical dissociation to a ketene and hydrogen atom is the key reaction path above 700 K.

Thermal Decomposition of 2(3H) and 2(5H) Furanones: Theoretical Aspects

The thermal decomposition reactions of 2(3H) and 2(5H) furanones and their methyl derivatives are explored. Theoretical calculations of the barriers, reaction enthalpies, and the properties of these and intermediate species are reported using the composite model chemistry CBS-QB3 and also the functional M06-2X allied to the 6-311++G(d,p) basis set. Thus, the bond dissociation enthalpies, ionization energies, and unimolecular chemical kinetic rate constants in the high-pressure limit were computed. We show that flow reactor experiments that intimated that heating the 2(3H) furanone converts it to the isomeric 2(5H) furanone occurs via a 1 → 2 H-transfer reaction to an open ring ketenoic aldehyde. The latter can then ring close to the other isomeric structure. The final products acrolein and carbon monoxide are only formed from 2(3H), and acrolein will further decompose to ethylene and CO. Comparable channels explain the interconversion of 5-methyl-2(3H) furanone to its 2(5H) isomer and to the formation of methyl vinyl ketone and CO. The influence of the methyl group at other positions on the ring is hardly of significance except in the case of 5-methyl-2(5H) furanone where a hydrogen atom transfer from the methyl group leads to the formation of a doubly unsaturated carboxylic compound, 2,4-pentadienoic acid. Studies of the UV photolysis of the parent compounds in both low-temperature inert argon matrices and in solution are broadly in accord with the thermal findings insofar as product formation is concerned and with our theoretical calculations. The dominant features of the early decomposition chemistry of these compounds are simple hydrogen transfer and simultaneous ring opening reactions, which do however result in some quite unusual species.

Products from pyrolysis of gas-phase propionaldehyde

A hyperthermal nozzle was utilized to study the thermal decomposition of propionaldehyde, CH3CH2CHO, over a temperature range of 1073-1600 K. Products were identified with two detection methods: matrix-isolation Fourier transform infrared spectroscopy and photoionization mass spectrometry. Evidence was observed for four reactions during the breakdown of propionaldehyde: α-C-C bond scission yielding CH3CH2, CO, and H, an elimination reaction forming methylketene and H2, an isomerization pathway leading to propyne via the elimination of H2O, and a β-C-C bond scission channel forming methyl radical and (•)CH2CHO. The products identified during this experiment were CO, HCO, CH3CH2, CH3CH═C═O, H2O, CH3C≡CH, CH3, H2C═C═O, CH2CH2, CH3CH═CH2, HC≡CH, CH2CCH, H2CO, C4H2, C4H4, and CH3CHO. The first eight products result from primary or bimolecular reactions involving propionaldehyde while the remaining products occur from reactions including the initial pyrolysis products. While the pyrolysis of propionaldehyde involves reactions similar to those observed for acetaldehyde and butyraldehyde in recent studies, there are a few unique products observed which highlight the need for further study of the pyrolysis mechanism.

EXPERIMENTAL AND MODELING STUDY OF PREMIXED LAMINAR FLAMES OF ETHANOL AND METHANE

To better understand the chemistry of the combustion of ethanol, the structure of five low pressure laminar premixed flames has been investigated: a pure methane flame (φ=1), three pure ethanol flames (φ=0.7, 1.0, and 1.3), and an ethanol/methane mixture flames (φ=1). The flames have been stabilized on a burner at a pressure of 6.7 kPa using argon as dilutant, with a gas velocity at the burner of 64.3 cm/s at 333 K. The results consist of mole fraction profiles of 20 species measured as a function of the height above the burner by probe sampling followed by online gas chromatography analyses. A mechanism for the oxidation of ethanol was proposed. The reactions of ethanol and acetaldehyde were updated and include recent theoretical calculations while that of ethenol, dimethyl ether, acetone, and propanal were added in the mechanism. This mechanism was also tested against experimental results available in the literature for laminar burning velocities and laminar premixed flame where ethenol was detected. The main reaction pathways of consumption of ethanol are analyzed. The effect of the branching ratios of reaction C2H5OH+OH→Products+H2O is also discussed.

JTHERGAS: Thermodynamic Estimation from 2D Graphical Representations of Molecules

JTHERGAS is a versatile calculator (implemented in JAVA) to estimate thermodynamic information from two dimensional graphical representations of molecules and radicals involving covalent bonds based on the Benson additivity method. The versatility of JTHERGAS stems from its inherent philosophy that all the fundamental data used in the calculation should be visible, to see exactly where the final values came from, and modifiable, to account for new data that can appear in the literature. The main use of this method is within automatic combustion mechanism generation systems where fast estimation of a large number and variety of chemical species is needed. The implementation strategy is based on meta-atom definitions and substructure analysis allowing a highly extensible database without modification of the core algorithms. Several interfaces for the database and the calculations are provided from terminal line commands, to graphical interfaces to web-services. The first order estimation of thermodynamics is based summing up the contributions of each heavy atom bonding description. Second order corrections due to steric hindrance and ring strain are made. Automatic estimate of contributions due to internal, external and optical symmetries are also made. The thermodynamical data for radicals is calculated by taking the difference due to the lost of a hydrogen radical taking into account changes in symmetry, spin, rotations, vibrations and steric hindrances. The software is public domain and is based on standard libraries such as CDK and CML.

Farewell to the HSAB treatment of ambident reactivity

The concept of hard and soft acids and bases (HSAB) proved to be useful for rationalizing stability constants of metal complexes. Its application to organic reactions, particularly ambident reactivity, has led to exotic blossoms. By attempting to rationalize all the observed regioselectivities by favorable soft-soft and hard-hard as well as unfavorable hard-soft interactions, older treatments of ambident reactivity, which correctly differentiated between thermodynamic and kinetic control as well as between different coordination states of ionic substrates, have been replaced. By ignoring conflicting experimental results and even referring to untraceable experimental data, the HSAB treatment of ambident reactivity has gained undeserved popularity. In this Review we demonstrate that the HSAB as well as the related Klopman-Salem model do not even correctly predict the behavior of the prototypes of ambident nucleophiles and, therefore, are rather misleading instead of useful guides. An alternative treatment of ambident reactivity based on Marcus theory will be presented.