Effect of Electrolyte Concentration on the Dynamic Surface Tension and Dilational Viscoelasticity of Adsorption Layers of Chitosan and Dodecyl Chitosan

Interfacial Properties of Chitosan in Interfacial Shear and Capsule Compression

The time-dependent behavior of surface-active adsorption layers at the oil/water interface can dictate emulsion behavior at both the micro- and macroscale. In addition, self-healing behavior of the adsorption layer may benefit emulsion stability subject to large deformation under processing or during final application. We explore the behavior of chitosan, a known hydrophilic emulsifier, which forms nanoparticle aggregates when the concentration of acetate buffer exceeds 0.3 M. We observe a Pickering adsorption layer building and strain-dependent behavior of the chitosan at the medium chain triglyceride oil/water interface. We compare this to the behavior of identical chitosan layers coated on oil droplets via atomic force microscopy colloidal probe compression in both linear and oscillatory compressions. In both interfacial shear rheometry and the capsule compression, a thick, elastic layer with strong time-dependent recovery behavior is observed, suggesting that the layer has some self-healing capabilities.

Probing the adsorption/desorption of amphiphilic polymers at the air-water interface during large interfacial deformations

Hydrophobically modified polymers are good candidates for the stabilization of liquid interfaces thanks to the high anchoring energy of the hydrophobic parts. In this article we probe the interfacial anchoring of a series of home-made hydrophobically modified polymers with controlled degree of grafting by studying their behavior upon large area dilations and compressions. By comparing the measured interfacial tension to the one that we expect in the case of a constant number of adsorbed monomers, we are able to deduce whether desorption or adsorption occurs during area variations. We find that the polymer chains with the longest hydrophobic grafts desorb at larger compressions compared to the polymers with the shortest grafts, because of their larger desorption energy. Furthermore, for a given graft length, we observe more desorption for polymers with the highest grafting densities. We attribute this counter intuitive result to the fact that at high grafting densities, the length of the polymer loops is shorter, and hence the elastic penalty upon compression is larger for these layers, leading to a faster desorption. Comparing the elastic penalty to thermal energy, k_BT, enables deducing a critical grafting density above which desorption of grafts is expected upon compression, which is consistent with our experimental results. In the case of large area dilations, the experiments reveal that the number of adsorbed anchors remains constant in the case of chains with a low grafting density while chains with the highest degree of grafting seem to show some degree of adsorption during the dilatation. Therefore, in these highly grafted chains there may be unadsorbed grafts remaining in the vicinity of the interface, which may adsorb quickly at the interface upon dilatation.

Distilled pyroligneous liquor obtained from Eucalyptus grandis and chitosan: physicochemical properties of the solution and films

The pyroligneous liquor is a product obtained during the production of charcoal, with well-known antimicrobial activity. In this work, we characterized the physical chemistry properties of a formulation composed of distilled pyroligneous liquor (DPL), obtained from Eucalyptus grandis, and chitosan. A good interaction between the polymer and the solvent was observed. Auto-supported films were prepared with these systems and characterized with respect to their structure and photo-protection properties, water vapor permeability, and resistance to water and to thermal degradation. They present a semi-crystalline structure and are hygroscopic, but are stable under immersion for up to 7 days. The swelling degree in water is 300% in weight and the permeability to water vapor was between 30 and 45 g m^-1 h^-1 (for films with 80 to 10 μm, respectively). The obtained films are able to efficiently block the incident UVB and UVC radiation; the molar absorptivity decreases exponentially with increasing wavelength and is stable up to 300 °C. These properties confer desirable properties to the films, obtained from these precursors of a renewable source, to be used as coatings.

Wall slipping behavior of foam with nanoparticle-armored bubbles and its flow resistance factor in cracks

In this work, wall slipping behavior of foam with nanoparticle-armored bubbles was first studied in a capillary tube and the novel multiphase foam was characterized by a slipping law. A crack model with a cuboid geometry was then used to compare with the foam slipping results from the capillary tube and also to evaluate the flow resistance factor of the foam. The results showed that the slipping friction force F FR in the capillary tube significantly increased by addition of modified SiO2 nanoparticles, and an appropriate power law exponents by fitting F FR vs. Capillary number, Ca, was 1/2. The modified nanoparticles at the surface were bridged together and formed a dense particle "armor" surrounding the bubble, and the interconnected structures of the "armor" with strong steric integrity made the surface solid-like, which was in agreement with the slip regime associated with rigid surface. Moreover, as confirmed by 3D microscopy, the roughness of the bubble surface increased with nanoparticle concentration, which in turn increased the slipping friction force. Compared with pure SDBS foam, SDBS/SiO2 foam shows excellent stability and high flow resistance in visual crack. The resistance factor of SiO2/SDBS foam increased as the wall surface roughness increased in core cracks.

Effect of salt content on the rheological properties of hydrogel based on oligomeric electrolyte

Dynamic light scattering and oscillatory rheology experiments were performed to study the effects of various salts on the hydrogel consisting of an oligomeric electrolyte gelator, poly(pyridinium-1,4-diyliminocarbonyl-1,4-phenylenemethylene chloride) (1-Cl). Sol-gel transition temperature increased with increasing salt concentration that suggested the salt-in behavior. The concentration dependence of the dynamic shear moduli showed power-law scaling behavior and was compared with the predictions made by the fractal gel model. The brittleness was increased by increasing salt concentration, indicating that 1-Cl hydrogel became better packed into stronger networks in ionic solutions. After certain salt concentrations, 1-Cl hydrogel started precipitation that might be due to the excessive network formation resulting in collapse of the network structure. The recovery of the mechanical properties of 1-Cl hydrogel was completely reduced in the presence of salts.

Experimental study on energy dissipation of electrolytes in nanopores

When a nonwetting fluid is forced to infiltrate a hydrophobic nanoporous solid, the external mechanical work is partially dissipated into thermal energy and partially converted to the liquid-solid interface energy to increase its enthalpy, resulting in a system with a superior energy absorption performance. To clarify the energy dissipation and conversion mechanisms, experimental infiltration and defiltration tests of liquid/ion solutions into nanopores of a hydrophobic ZSM-5 zeolite were conducted. The characteristics of energy dissipation were quantified by measuring the temperature variation of the immersed liquid environment and compared against that estimated from pressure-infiltration volume isotherms during infiltration and defiltration stages of the test. Both stages were observed to be endothermic, with the temperature of the liquid phase showing a steady increase with changes in liquid saturation. The confinement of the molecular-sized pore space causes the liquid molecules/ions to transit between statuses of orderly and disorderly motions, resulting in dissipation behaviors that vary with liquid infiltration/defiltration rates and the types and concentrations of additive electrolytes in the liquid-both factors of which alter the characteristics of the nanofluidic transport behavior.

Relaxation processes of PGPR at the water/oil interface inferred by oscillatory or transient viscoelasticity measurements

The rheological properties of PolyGlycerol PolyRicinoleate (PGPR) at the oil/water interface were studied using a drop-shaped tensiometer. Small deformation oscillations of the drop area allow the measurement of the interfacial viscoelasticity spectrum, that is, the elastic and viscous moduli as a function of frequency. Another way to obtain such a spectrum is to perform a transient relaxation measurement from which the relaxation modulus as a function of time is deduced and interpreted. Several models containing one or more relaxation times were considered, and their resulting spectra were compared to the oscillatory ones. Similar results suggest that one could in principle use oscillatory or transient relaxations indifferently. However, the transient relaxation technique proved to be more adapted for the determination of the relaxation times. At low PGPR concentrations in oil, the behavior is controlled by long relaxation times, whereas short ones take over when approaching and exceeding the saturation interfacial concentration. This was understood as a shift from a diffusion-dominated regime to a rearrangements-dominated regime.