Phase Behavior of Aqueous Mixtures of 2-Phenylbenzimidazole-5-sulfonic Acid and Cetyltrimethylammonium Bromide: Hydrogels, Vesicles, Tubules, and Ribbons

Alkaline cations dramatically control molecular hydrogelation by an amino acid-derived anionic amphiphile

Understanding the factors that control the formation of (supra)molecular hydrogels permits a rational tuning of their properties and represents a primary challenge for developing smart biocompatible soft materials. Hydrogel formation by molecular amphiphilic anions at millimolar concentrations is counterintuitive, considering the solubility of these species in water. Here we report hydrogel formation by a simple anionic molecular amphiphile and a rationale for the fibrillisation process observed. The studied molecule, DodValSuc, consists of a 12C alkyl chain, an l-valine unit and a terminal succinic acid moiety. Hydrogelation depends to a large degree on the nature and concentration of the alkaline cations present in the medium (Li⁺, Na⁺ or K⁺). As a result, gelation efficiency and properties like thermal stability or rheology are highly tunable using the alkaline cation present or its concentration as variables. A detailed study is reported, which includes the determination of minimum gelation concentration (MGC) by tabletop rheology, critical micelle concentration (CMC) using pyrene as a fluorescent probe, thermal stability (solubility) by ¹H NMR, the morphology of the fibres by transmission electron microscopy (TEM), crystallinity by X-ray diffraction (XRD) and gel strength by oscillatory rheology. Additionally, dynamic light scattering (DLS) was used to evaluate the size of the micelles and permitted monitoring of the fibrillisation process. Altogether, the results are consistent with the formation of micelles that experience head crystallisation and subsequent aggregation into crystalline fibres. The alkaline cations play a crucial role in providing the cement that glues together the gelator molecules, making their concentration a critical parameter for gelation efficiency and properties. Furthermore, the gelation-promoting effects are inversely correlated with the size of the cations so that the highest thermal stability and rheological strength were found for the hydrogels formed in the presence of Li^+.

Metal nanowires grown in situ on polymeric fibres for electronic textiles

A key aspect of the use of conventional fabrics as smart textiles and wearable electronics is to incorporate a means of electrical conductivity into single polymer fibres. We present the transformation of thin polymer fibres and fabrics into conductive materials by in situ growth of a thin, optically transparent gold-silver nanowire (NW) mesh with a relatively low metal loading directly on the surface of polymer fibres. Demonstrating the method on poly(lactic-co-glycolic) acid and nylon microfibres, we show that the NW network morphology depends on the diameter of the polymer fibres, where at small diameters (1-2 μm), the NWs form a randomly oriented network, but for diameters above several micrometers, the NWs wrap around the fibres transversally. This phenomenon is associated with the stiffness of the surfactant templates used for the NW formation. The NW-decorated fibres exhibit a significant increase in conductivity. Moreover, single fibres can be stretched up to ∼15% before losing the electrical conductivity, while non-woven meshes could be stretched by about 25% before losing the conductivity. We believe that the approach demonstrated here can be extended to other polymeric fibres and that these flexible and transparent metal-coated polymer fibres could be useful for various smart electronic textile applications.

Ionic liquid mediated micelle to vesicle transition of a cationic gemini surfactant: a spectroscopic investigation

In this contribution, we have examined a composition dependent self aggregated structural modification of a catanionic mixture of the surface active ionic liquid (IL) 1-butyl-3-methylimidazolium octyl sulphate and a cationic gemini surfactant (14-5-14) in aqueous medium. We have observed that the hydrodynamic diameter of the aggregates increases with increasing IL concentration and microscopic evidence (HRTEM, FESEM, and LCSM) shows the formation of vesicle like aggregates (Dh ≈ 200 nm) at XIL = 0.5. The steady state fluorescence anisotropy of the membrane binding probe DPH shows a micelle to vesicle transition at this composition. The viscosity of the solution shows a peak at XIL = 0.3, indicating the formation of a worm like micelle as an intermediate of the micelle to vesicle transition. The rotational dynamics shows a stiffer surfactant packing in the vesicles compared to the micelles, whereas, the solvation dynamics measurements indicate a higher abundance of bound type water in the vascular medium compared to that for the micelle. The formed vesicles also show stability towards temperature and biomolecules, which can be used for respective applications.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Reversible transition between SDS@2β-CD microtubes and vesicles triggered by temperature

Switching between association and dissociation is the well-known strategy for constructing responsive materials based on the host-guest complexes of cyclodextrins (CDs). In this work, we report that temperature may also trigger self-assembly transition in the supramolecular system composed of sodium dodecyl sulfate (SDS) and β-cyclodextrin (β-CD) at a molar ratio of 1:2. We reported previously that, at this ratio, SDS and β-CD form a channel-type SDS@2β-CD supramolecular unit, which further self-assembles into non-amphiphilic vesicles and microtubes driven by hydrogen bonding. Here, we report that the vesicles and microtubes can be reversibly switched between each other upon decreasing and increasing temperature. Control experiments in heavy water suggest that water molecules play a dominating role in the hydrogen bonding between SDS@2β-CD supramolecular units at lower concentration and higher temperature. Under opposite conditions, the hydrogen bonding between CDs is dominating. Therefore, for the 5% system, we observed a vesicle to microtube transition with a decreasing temperature, whereas for the 10% system, we observed the reverse process. Both processes are reversible. This is not only an example of temperature-triggered responsiveness in non-amphiphilic self-assemblies but also a new mode of responsiveness for the host-guest inclusion systems based on CDs. This temperature-responsive process is anticipated to shed light on the design and development of novel advanced materials.

Comparative studies on the crystalline to fluid phase transitions of two equimolar cationic/anionic surfactant mixtures containing dodecylsulfonate and dodecylsulfate

In this work, a cationic surfactant, dodecyltrimethylammonium bromide (DTAB), and an anionic surfactant, sodium dodecylsulfonate (SDSO(3)) or sodium dodecylsulfate (SDSO(4)), were mixed in an equimolar ratio to prepare SDSO(3)-DTAB and SDSO(4)-DTAB binary mixtures. The phase behavior, structure, and morphology of these two surfactant mixtures were investigated by differential scanning calorimetry, synchrotron X-ray scattering, freeze-fracture electron microscopy, and Fourier transform infrared spectroscopy. It was found that upon heating, both of the two systems transform from multilamellar crystalline phase to liquid crystalline (or fluid) phase. It is interesting to find that, although SDSO(3) has a lower molecular weight, the crystalline phase of SDSO(3)-DTAB shows much higher thermostability as compared with that of SDSO(4)-DTAB. Other than this, we observed a large difference in the repeat distances of the two crystalline phases. More interestingly, at 60 °C in the fluid phases, cylindrical micelles formed in the SDSO(3)-DTAB system, while spherical micelles were observed in the SDSO(4)-DTAB system. Our present work demonstrates that a subtle difference in the headgroup structure of the anionic component markedly affects the thermostability, packing structure, and morphology of the surfactant mixtures, which suggests the importance of the match of the head-head and tail-tail interactions between the cationic and anionic surfactants.

Phase behavior and rheological properties of salt-free catanionic TTAOH/DA/H2O system in the presence of hydrophilic and hydrophobic salts

In the cationic and anionic (catanionic) surfactant mixed system, tetradecyltrimethylammonium hydroxide (TTAOH)/decanoic acid (DA)/H(2)O, abundant phase behaviors were obtained in the presence of hydrophilic and hydrophobic salts. The microstructures of typical L(α) phases with the different compositions were characterized by the transmission electron microscope (TEM) images. Aqueous double-phase transition induced by addition of hydrophilic salts was observed when the cationic surfactant was in excess. Salt-induced reversible vesicle phases could be obtained when the anionic surfactant was excess, whereas the vesicle phase at lower salinity behaves highly viscoelastic but is much less viscoelastic with high salinity which was demonstrated by measuring their rheological properties. The L(α) phase with the positive membrane charges can be finally transferred into an L(1) phase with added salts. The ion specificity of hydrophilic and hydrophobic salts is discussed, and the order of cations is summarized, which is significant for the further study of the Hofmeister effects on catanionic surfactant mixed systems.

Water-soluble organo-silica hybrid nanotubes templated by cylindrical polymer brushes

We report the preparation of water-soluble organo-silica hybrid nanotubes templated by core-shell-corona structured triblock terpolymer cylindrical polymer brushes (CPBs). The CPBs consist of a polymethacrylate backbone, a poly(tert-butyl acrylate) (PtBA) core, a poly(3-(trimethoxysilyl)propyl acrylate) (PAPTS) shell, and a poly(oligo(ethylene glycol) methacrylate) (POEGMA) corona. They were prepared via the "grafting from" strategy by the combination of two living/controlled polymerization techniques: anionic polymerization for the backbone and atom transfer radical polymerization (ATRP) for the triblock terpolymer side chains. The monomers tBA, APTS, and OEGMA were consecutively grown from the pendant ATRP initiating groups along the backbone to spatially organize the silica precursor, the trimethoxysilyl groups, into a tubular manner. The synthesized core-shell-corona structured CPBs then served as a unimolecular cylindrical template for the in situ fabrication of water-soluble organo-silica hybrid nanotubes via base-catalyzed condensation of the PAPTS shell block. The formed tubular nanostructures were characterized by transmission electron microscopy (TEM), cryogenic TEM, and atomic force microscopy.