Specific Ion Effects on Adsorption of Lysozyme on Functionalized SBA-15 Mesoporous Silica

Thermoreversible and tunable supramolecular hydrogels based on chitosan and metal cations

A new thermoreversible and tunable hydrogel CS-M with high water content prepared by metal cation (M = Cu²⁺, Zn²⁺, Cd²⁺ and Ni²⁺) and chitosan (CS) was reported. The influence of metal cations on the thermosensitive gelation of CS-M systems were studied. All prepared CS-M systems were in the transparent and stable sol state and could become the gel state at gelation temperature (T_g). These systems after gelation could recover to its original sol state at low temperature. CS-Cu hydrogel was mainly investigated and characterized due to its large T_g scale (32-80 °C), appropriate pH range (4.0-4.6) and low Cu²⁺ concentration. The result showed that the T_g range was influenced and could be tuned by adjusting Cu²⁺ concentration and system pH within an appropriate range. The influence of anions (Cl^-, NO3^- and Ac^-) in cupric salts in the CS-Cu system was also investigated. Scale application as heat insulation window was investigated outdoors. The different supramolecular interactions of the -NH₂ group in chitosan at different temperatures were proposed to dominate the thermoreversible process of CS-Cu hydrogel.

Protein Adsorption onto Modified Porous Silica by Single and Binary Human Serum Protein Solutions

Typical porous silica (SBA-15) has been modified with pore expander agent (1,3,5-trimethylbenzene) and fluoride-species to diminish the length of the channels to obtain materials with different textural properties, varying the Si/Zr molar ratio between 20 and 5. These porous materials were characterized by X-ray Diffraction (XRD), N2 adsorption/desorption isotherms at -196 °C and X-ray Photoelectron Spectroscopy (XPS), obtaining adsorbent with a surface area between 420-337 m2 g-1 and an average pore diameter with a maximum between 20-25 nm. These materials were studied in the adsorption of human blood serum proteins (human serum albumin-HSA and immunoglobulin G-IgG). Generally, the incorporation of small proportions was favorable for proteins adsorption. The adsorption data revealed that the maximum adsorption capacity was reached close to the pI. The batch purification experiments in binary human serum solutions showed that Si sample has considerable adsorption for IgG while HSA adsorption is relatively low, so it is possible its separation.

Advances and Challenges in the Creation of Porous Metal Phosphonates

In the expansive world of porous hybrid materials, a category of materials that has been rather less explored than others and is gaining attention in development is the porous metal phosphonates. They offer promising features towards applications which demand control over the inorganic–organic network and interface, which is critical for adsorption, catalysis and functional devices and technology. The need to establish a rationale for new synthesis approaches to make these materials in a controlled manner is by itself an important motivation for material chemists. In this review, we highlight the various synthetic strategies exploited, discussing various metal phosphonate systems and how they influence the properties of porous metal phosphonates. We discuss porous metal phosphonate systems based on transition metals with an emphasis on addressing challenges with tetravalent metals. Finally, this review provides a brief description of some key areas of application that are ideally suited for porous metal phosphonates.

Buffer Influence on the Amino Acid Silica Interaction

Protein-surface interactions are exploited in various processes in life sciences and biotechnology. Many of such processes are performed in presence of a buffer system, which is generally believed to have an influence on the protein-surface interaction but is rarely investigated systematically. Combining experimental and theoretical methodologies, we herein demonstrate the strong influence of the buffer type on protein-surface interactions. Using state of the art chromatographic experiments, we measure the interaction between individual amino acids and silica, as a reference to understand protein-surface interactions. Among all the 20 proteinogenic amino acids studied, we found that arginine (R) and lysine (K) bind most strongly to silica, a finding validated by free energy calculations. We further measured the binding of R and K at different pH in presence of two different buffers, MOPS (3-(N-morpholino)propanesulfonic acid) and TRIS (tris(hydroxymethyl)aminomethane), and find dramatically different behavior. In presence of TRIS, the binding affinity of R/K increases with pH, whereas we observe an opposite trend for MOPS. These results can be understood using a multiscale modelling framework combining molecular dynamics simulation and Langmuir adsorption model. The modelling approach helps to optimize buffer conditions in various fields like biosensors, drug delivery or bio separation engineering prior to the experiment.

Specific Anion Effects on Lipase Adsorption and Enzymatic Synthesis of Biodiesel in Nonaqueous Media

Pseudomonas fluorescens lipase (Pfl) was adsorbed on macroporous polypropylene to obtain a heterogeneous biocatalyst. The effect of NaCl concentration and of different 100 mm sodium salts on the Pfl loading and catalytic performance toward biodiesel synthesis via the solvent-free methanolysis of triglycerides was studied. Although lipase adsorption onto polypropylene is governed by hydrophobic interactions, both salt concentration and anion type affect lipase loading. Protein loading decreased along the series: Cl^- > SO₄^2- ≈ no salt > Br^- > I^- > SCN^- > F^- > AcO^-. This nonmonotonic ion-specific trend can be the result of opposite mechanisms occurring during the adsorption step. A similar trend is observed also for triglyceride conversion and biodiesel yield. It is likely that ions affect the microenvironment of the adsorbed lipase by interacting specifically with the hydration water and polypeptide chains, thus affecting enzyme catalysis.

Mechanistic Study of Protein Adsorption on Mesoporous TiO2 in Aqueous Buffer Solutions

Protein adsorption is of fundamental importance for bioseparation engineering applications. In this work, a series of mesoporous TiO₂ with various geometric structures and different aqueous buffer solutions were prepared as platforms to investigate the effects of the surface geometry and ionic strength on the protein adsorptive behavior. The surface geometry of the TiO₂ was found to play a dominant role in the protein adsorption capacity when the ionic strength of buffer solutions is very low. With the increase in ionic strength, the effect of the geometric structure on the protein adsorption capacity reduced greatly. The change of ionic strength has the highest significant effect on the mesoporous TiO₂ with large pore size compared with that with small pore size. The interaction between the protein and TiO₂ measured with atomic force microscopy further demonstrated that the adhesion force induced by the surface geometry reduced with the increase in the ionic strength. These findings were used to guide the detection of the retention behavior of protein by high-performance liquid chromatography, providing a step forward toward understanding the protein adsorption for predicting and controlling the chromatographic separation of proteins.

Synthesis of sub-nanometer gold particles on modified silica

The deposition of gold on silica tends to give large particles when using conventional techniques.

Are specific buffer effects the new frontier of Hofmeister phenomena? Insights from lysozyme adsorption on ordered mesoporous silica

Different 10 mM buffers at the same nominal pH affect specifically the adsorption of lysozyme on ordered mesoporous silica. It emerges that specific buffer effects should be considered within ‘Hofmeister phenomena’.

Adsorption of lysozyme on hyaluronic acid functionalized SBA-15 mesoporous silica: a possible bioadhesive depot system

Silica-based ordered mesoporous materials are very attractive matrices to prepare smart depot systems for several kinds of therapeutic agents. This work focuses on the well-known SBA-15 mesoporous silica and lysozyme, an antimicrobial protein. In order to improve the bioadhesion properties of SBA-15 particles, the effect of hyaluronic acid (HA) functionalization on lysozyme adsorption was investigated. SBA-15 samples having high (H-SBA) and low (L-SBA) levels of functionalization were analyzed during the three steps of the preparations: (1) introduction of the -NH2 groups to obtain the SBA-NH2 samples; (2) functionalization with HA to obtain the SBA-HA matrices; (3) adsorption of lysozyme. All silica matrices were characterized through N2-adsorption/desorption isotherms, small-angle X-ray scattering, transmission electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The whole of the experimental data suggests that a high level of functionalization of the silica surface allows for a negligible lysozyme adsorption mainly due to unfavorable electrostatic interactions (H-SBA-NH2) or steric hindrance (H-SBA-HA). A low degree of functionalization of the silica surface brings about a very good performance toward lysozyme adsorption, being 71% (L-SBA-NH2) and 63% (L-SBA-HA) respectively, compared to that observed for original SBA-15. Finally, two different kinetic models--a "pseudo-second order" and a "intraparticle diffusion"--were compared to fit lysozyme adsorption data, the latter being more reliable than the former.

Models and mechanisms of Hofmeister effects in electrolyte solutions, and colloid and protein systems revisited

Specific effects of electrolytes have posed a challenge since the 1880's. The pioneering work was that of Franz Hofmeister who studied specific salt induced protein precipitation. These effects are the rule rather the exception and are ubiquitous in chemistry and biology. Conventional electrostatic theories (Debye-Hückel, DLVO, etc.) cannot explain such effects. Over the past decades it has been recognised that additional quantum mechanical dispersion forces with associated hydration effects acting on ions are missing from theory. In parallel Collins has proposed a phenomenological set of rules (the law of matching water affinities, LMWA) which explain and bring to order the order of ion-ion and ion-surface site interactions at a qualitative level. The two approaches appear to conflict. Although the need for inclusion of quantum dispersion forces in one form or another is not questioned, the modelling has often been misleading and inappropriate. It does not properly describe the chemical nature (kosmotropic/chaotropic or hard/soft) of the interacting species. The success of the LMWA rules lies in the fact that they do. Here we point to the way that the two apparently opposing approaches might be reconciled. Notwithstanding, there are more challenges, which deal with the effect of dissolved gas and its connection to 'hydrophobic' interactions, the problem of water at different temperatures and 'water structure' in the presence of solutes. They take us to another dimension that requires the rebuilding of theoretical foundations.

Anionic and cationic Hofmeister effects on hydrophobic and hydrophilic surfaces

Using a two-step modeling approach, we address the full spectrum of direct, reversed, and altered ionic sequences as the charge of the ion, the charge of the surface, and the surface polarity are varied. From solvent-explicit molecular dynamics simulations, we extract single-ion surface interaction potentials for halide and alkali ions at hydrophilic and hydrophobic surfaces. These are used within Poisson-Boltzmann theory to calculate ion density and electrostatic potential distributions at mixed polar/unpolar surfaces for varying surface charge. The resulting interfacial tension increments agree quantitatively with experimental data and capture the Hofmeister series, especially the anomaly of lithium, which is difficult to obtain using continuum theory. Phase diagrams that feature different Hofmeister series as a function of surface charge, salt concentration, and surface polarity are constructed from the long-range force between two surfaces interacting across electrolyte solutions. Large anions such as iodide have a high hydrophobic surface affinity and increase the effective charge magnitude on negatively charged unpolar surfaces. Large cations such as cesium also have a large hydrophobic surface affinity and thereby compensate an external negative charge surface charge most efficiently, which explains the well-known asymmetry between cations and anions. On the hydrophilic surface, the size-dependence of the ion surface affinity is reversed, explaining the Hofmeister series reversal when comparing hydrophobic with hydrophilic surfaces.

Hofmeister challenges: ion binding and charge of the BSA protein as explicit examples

Experiments on bovine serum albumin (BSA) via potentiometric titration (PT) and electrophoretic light scattering (ELS) are used to study specific-ion binding. The effect is appreciable at a physiological concentration of 0.1 M. We found that anions bind to the protein surface at an acidic pH, where the protein carries a positive charge (Z(p) > 0), according to a Hofmeister series (Cl(-) < Br(-) < NO(3)(-) < I(-) < SCN(-)), as well as at the isoionic point (Z(p) = 0). The results obtained require critical interpretation. The measurements performed depend on electrostatic theories that ignore the very specific effects they are supposed to reveal. Notwithstanding this difficulty, we can still infer that different 1:1 sodium salts affect the BSA surface charge/pH curve because anions bind to the BSA surface with an efficiency which follows a Hofmeister series.

Effect of surface wettability on ion-specific protein adsorption

We have systematically investigated the effect of surface wettability on ion-specific adsorption of bovine serum albumin (BSA) by using quartz crystal microbalance with dissipation (QCM-D) and surface plasmon resonance (SPR). The changes in frequency (Δf) and resonance unit (ΔRU) show a nonmonotonous change of the adsorbed amount of BSA as a function of molar fraction of 1-dodecanethiol (x(DDT)) of the self-assembled monolayer at pH 3.8, while the amount of adsorbed protein gradually increases with the x(DDT) at pH 7.4. The small changes of dissipation (ΔD) indicate that BSA molecules form a quite rigid protein layer on the surfaces, which results in only a slight difference in the adsorbed mass between the mass-uptake estimations from the Sauerbrey equation and the Voigt model. The difference in the adsorbed mass between QCM-D and SPR measurements is attributed to the coupled water in the protein layer. On the other hand, specific anion effect is observed in the BSA adsorption at pH 3.8 with the exception of the surface at x(DDT) of 0%, but no obvious cation specificity can be observed at pH 7.4. The ΔD-Δf plots show that the BSA adsorption at pH 3.8 has two distinct kinetic processes. The first one dominated by the protein-surface interactions is an anion-nonspecific process, whereas the second one dominated by the protein structural rearrangements is an anion-specific process. At pH 7.4, the second kinetic process can only be observed at the relatively hydrophobic surfaces, and no cation specificity is observed in the first and second kinetic processes.

Disentangling protein-silica interactions

We present the results of modelling studies aimed at the understanding of the interaction of a 7 nm sized water droplet containing a negatively charged globular protein with flat silica surfaces. We show how the droplet interaction with the surface depends on the electrostatic surface charge, and that adhesion of the droplet occurs when the surface is negatively charged as well. The key role of water and of the charge-balancing counter ions in mediating the surface-protein adhesion is highlighted. The relevance of the present results with respect to the production of bioinorganic hybrids via encapsulation of proteins inside mesoporous silica materials is discussed.

Insights into ion specificity in water-methanol mixtures via the reentrant behavior of polymer

In the present work, we have for the first time systematically investigated the ion specific reentrant behavior of poly(N-isopropylacryamide) (PNIPAM) in water-methanol mixtures. Turbidity measurements demonstrate that SCN(-) and ClO(4)(-) depress the reentrant transition, whereas other anions enhance the transition. As the anion changes from chaotropic to kosmotropic, the minimum critical phase transition temperature (T(min)) decreases and the corresponding volume fraction of methanol (X(M)) shifts to a larger value. Our results demonstrate that anion specificity is due to the anionic structure making/breaking effect on water/methanol complexes. Cations are found to have a lesser but still significant effect on the reentrant transition, and as T(min) decreases the corresponding X(M) also shifts to larger values as with the anions. Our studies show that cation specificity is induced by specific interactions between cations and PNIPAM chains. Furthermore, both anion and cation specificities are amplified as X(M) is increased due to the formation of additional water/methanol complexes. Calorimetry measurements demonstrate that the ion specificity is dominated by changes in entropy.

Measurements and theoretical interpretation of points of zero charge/potential of BSA protein

The points of zero charge/potential of proteins depend not only on pH but also on how they are measured. They depend also on background salt solution type and concentration. The protein isoelectric point (IEP) is determined by electrokinetical measurements, whereas the isoionic point (IIP) is determined by potentiometric titrations. Here we use potentiometric titration and zeta potential (ζ) measurements at different NaCl concentrations to study systematically the effect of ionic strength on the IEP and IIP of bovine serum albumin (BSA) aqueous solutions. It is found that high ionic strengths produce a shift of both points toward lower (IEP) and higher (IIP) pH values. This result was already reported more than 60 years ago. At that time, the only available theory was the purely electrostatic Debye-Hückel theory. It was not able to predict the opposite trends of IIP and IEP with ionic strength increase. Here, we extend that theory to admit both electrostatic and nonelectrostatic (NES) dispersion interactions. The use of a modified Poisson-Boltzmann equation for a simple model system (a charge regulated spherical colloidal particle in NaCl salt solutions), that includes these ion specific interactions, allows us to explain the opposite trends observed for isoelectric point (zero zeta potential) and isoionic point (zero protein charge) of BSA. At higher concentrations, an excess of the anion (with stronger NES interactions than the cation) is adsorbed at the surface due to an attractive ionic NES potential. This makes the potential relatively more negative. Consequently, the IEP is pushed toward lower pH. But the charge regulation condition means that the surface charge becomes relatively more positive as the surface potential becomes more negative. Consequently, the IIP (measuring charge) shifts toward higher pH as concentration increases, in the opposite direction from the IEP (measuring potential).

Possible origin of the inverse and direct Hofmeister series for lysozyme at low and high salt concentrations

Protein solubility studies below the isoelectric point exhibit a direct Hofmeister series at high salt concentrations and an inverse Hofmeister series at low salt concentrations. The efficiencies of different anions measured by salt concentrations needed to effect precipitation at fixed cations are the usual Hofmeister series (Cl(-) > NO(3)(-) > Br(-) > ClO(4)(-) > I(-) > SCN(-)). The sequence is reversed at low concentrations. This has been known for over a century. Reversal of the Hofmeister series is not peculiar to proteins. Its origin poses a key test for any theoretical model. Such specific ion effects in the cloud points of lysozyme suspensions have recently been revisited. Here, a model for lysozymes is considered that takes into account forces acting on ions that are missing from classical theory. It is shown that both direct and reverse Hofmeister effects can be predicted quantitatively. The attractive/repulsive force between two protein molecules was calculated. To do this, a modification of Poisson-Boltzmann theory is used that accounts for the effects of ion polarizabilities and ion sizes obtained from ab initio calculations. At low salt concentrations, the adsorption of the more polarizable anions is enhanced by ion-surface dispersion interactions. The increased adsorption screens the protein surface charge, thus reducing the surface forces to give an inverse Hofmeister series. At high concentrations, enhanced adsorption of the more polarizable counterions (anions) leads to an effective reversal in surface charge. Consequently, an increase in co-ion (cations) adsorption occurs, resulting in an increase in surface forces. It will be demonstrated that among the different contributions determining the predicted specific ion effect the entropic term due to anions is the main responsible for the Hofmeister sequence at low salt concentrations. Conversely, the entropic term due to cations determines the Hofmeister sequence at high salt concentrations. This behavior is a remarkable example of the charge-reversal phenomenon.

Charge heterogeneity of surfaces: mapping and effects on surface forces

The DLVO theory treats the total interaction force between two surfaces in a liquid medium as an arithmetic sum of two components: Lifshitz-van der Waals and electric double layer forces. Despite the success of the DLVO model developed for homogeneous surfaces, a vast majority of surfaces of particles and materials in technological systems are of a heterogeneous nature with a mosaic structure composed of microscopic and sub-microscopic domains of different surface characteristics. In such systems, the heterogeneity of the surface can be more important than the average surface character. Attractions can be stronger, by orders of magnitude, than would be expected from the classical mean-field DLVO model when area-averaged surface charge or potential is employed. Heterogeneity also introduces anisotropy of interactions into colloidal systems, vastly ignored in the past. To detect surface heterogeneities, analytical tools which provide accurate and spatially resolved information about material surface chemistry and potential - particularly at microscopic and sub-microscopic resolutions - are needed. Atomic force microscopy (AFM) offers the opportunity to locally probe not only changes in material surface characteristic but also charges of heterogeneous surfaces through measurements of force-distance curves in electrolyte solutions. Both diffuse-layer charge densities and potentials can be calculated by fitting the experimental data with a DLVO theoretical model. The surface charge characteristics of the heterogeneous substrate as recorded by AFM allow the charge variation to be mapped. Based on the obtained information, computer modeling and simulation can be performed to study the interactions among an ensemble of heterogeneous particles and their collective motions. In this paper, the diffuse-layer charge mapping by the AFM technique is briefly reviewed, and a new Diffuse Interface Field Approach to colloid modeling and simulation is briefly discussed.