Thermal Decomposition of 2-Butanol as a Potential Nonfossil Fuel: A Computational Study

High-Temperature Pyrolysis Study of 2-Methyl-2-butanol behind Reflected Shock Wave: Shock Tube and Computational Study

Pyrolysis of a branched alcohol, 2-methyl-2-butanol (2M2BOH), was carried out behind the reflected shock wave in the temperature range of 1011-1303 K and under pressures varying from 9.3 to 14.6 atm. Qualitative and quantitative analysis of the postshock mixture was performed using gas chromatography-mass spectrometry and gas chromatography with a flame ionization detector, respectively. The rate coefficients for the C-C and C-O bond cleavage reaction pathways were calculated using the variational transition-state theory. The Rice-Ramsperger-Kessel-Marcus/Master equation was employed to calculate the rate coefficients for the H2O-elimination reactions, unimolecular dissociation, and isomerization reaction pathways. The overall decomposition rate coefficient for the 2-methyl 2-butanol (2M2BOH) was estimated to be k t o t a l e x p t ( 1011 - 1303 K ) = ( 3.29 ± 0.73 ) × 10 11 × exp [ - ( 47.41 ± 0.53 T ) ] s - 1 , where activation energy is given in kcal mol-1. The reaction path analysis was performed, which gives information regarding the contribution of individual intermediate species toward the decomposition of 2M2BOH. A set of reactions was proposed and used to simulate the combustion chemistry of 2M2BOH, which consists of 48 reactions and 39 species. The experimentally measured and simulated mole fractions for the reactant and products showed reasonably good agreement. This work additionally investigates the effect of branching on the decomposition kinetics of long-chain alcohols.

Screening Stability, Thermochemistry, and Chemical Kinetics of 3-Hydroxybutanoic Acid as a Bifunctional Biodiesel Additive

The thermo-kinetic aspects of 3-hydroxybutyric acid (3-HBA) pyrolysis in the gas phase were investigated using density functional theory (DFT), specifically the M06-2X theoretical level in conjunction with the cc-pVTZ basis set. The obtained data were compared with benchmark CBS-QB3 results. The degradation mechanism was divided into 16 pathways, comprising 6 complex fissions and 10 barrierless reactions. Energy profiles were calculated and supplemented with computations of rate coefficients and branching ratios over the temperature range of 600-1700 K at a pressure of 1 bar using transition state theory (TST) and Rice-Ramsperger-Kassel-Marcus (RRKM) methods. Thermodynamics results indicated the presence of six stable conformers within a 4 kcal mol-1 energy range. The estimated chemical kinetics results suggested that TST and RRKM approaches are comparable, providing confidence in our calculations. The branching ratio analysis reveals that the dehydration reaction pathway leading to the formation of H2O and CH3CH═CHCO2H dominates entirely at T ≤ 650 K. At these temperatures, there is a minor contribution from the simple homolytic bond fission reaction, yielding related radicals [CH3•CHOH + •CH2CO2H]. However, at T ≥ 700 K, this reaction becomes the primary decomposition route. At T = 1700 K, there is a minor involvement of a reaction pathway resulting in the formation of CH3CH(OH)•CH2 + •CHO(OH) with an approximate contribution of 16%, and a reaction leading to [•CH3 + •CH2OHCH2CO2H] with around 9%.

Pyrolytic elimination of ethylene from ethoxyquinolines and ethoxyisoquinolines: a computational study

This work reports a thermo-kinetic study on unimolecular thermal decomposition of some ethoxyquinolines and ethoxyisoquinolines derivatives (1-ethoxyisoquinoline (1-EisoQ), 2-ethoxyquinoline (2-EQ), 3-ethoxyquinoline (3-EQ), 3-ethoxyisoquinoline (3-EisoQ), 4-ethoxyquinoline (4-EQ), 4-ethoxyisoquinoline (4-EisoQ), 5-ethoxyquinoline (5-EQ), 5-ethoxyisoquinoline (5-EisoQ), 8-ethoxyquinoline (8-EQ) and 8-ethoxyisoquinoline (8-EisoQ)) using density functional theory DFT (BMK, MPW1B95, M06-2X) and ab initio complete basis set-quadratic Becke3 (CBS-QB3) calculations. In the course of the decomposition of the investigated systems, ethylene is eliminated with the production of either keto or enol tautomer. The six-membered transition state structure encountered in the path of keto formation is much lower in energy than the four-membered transition state required to give enol form. Rate constants and activation energies for the decomposition of 1-EisoQ, 2-EQ, 3-EQ, 3-EisoQ, 4-EQ, 4-EisoQ, 5-EQ, 5-EisoQ, 8-EQ, and 8-EisoQ have been estimated at different temperatures and pressures using conventional transition state theory combined with Eckart tunneling and the unimolecular statistical Rice-Ramsperger-Kassel-Marcus theories. The tunneling correction is significant at temperatures up to 1000 K. Rate constants results reveal that ethylene elimination and keto production are favored kinetically and thermodynamically over the whole temperature range of 400-1200 K and the rates of the processes under study increase with the rising of pressure up to 1 atm.

The Pincer Ligand Supported Ruthenium Catalysts for Acetylene Hydrochlorination: Molecular Mechanisms from Theoretical Insights

Pincer ligand supported RuII chloride complexes may be used for acetylene hydrochlorination as non-mercury molecular catalysts. Based on theoretical calculations, the catalytic mechanism and the interaction between catalysts and reactants has been evaluated, indicating that the (pincer)RuIICl2 platform supports electrophilic proton-ruthenation of C2H2. Energy decomposition studies further illustrate the electron-rich property of the RuII center, which can increase the negative charge of C2H2 via 4d-electron backdonation. Thus, the electrophilic reaction mechanism is favored due to lower energetic barriers. By improving the electron-donating ability of ligands, this lowering of energetic barriers can be enhanced. Therefore, non-mercury catalysts for acetylene hydrochlorination with milder reaction conditions and higher catalytic activity can be designed.

A W1 computational study on the kinetics of initial pyrolysis of a biodiesel model: methyl propanoate

This work reports on the thermochemistry and kinetics of methyl propanoate (MePr) initial pyrolysis using the high ab initio multi-level composite W1 method over the temperature range 400–2000 K.

Computational Studies on the Thermodynamic and Kinetic Parameters of Oxidation of 2-Methoxyethanol Biofuel via H-Atom Abstraction by Methyl Radical

In this work, a theoretical investigation of thermochemistry and kinetics of the oxidation of bifunctional 2-Methoxyethanol (2ME) biofuel using methyl radical was introduced. Potential-energy surface for various channels for the oxidation of 2ME was studied at density function theory (M06-2X) and ab initio CBS-QB3 levels of theory. H-atom abstraction reactions, which are essential processes occurring in the initial stages of the combustion or oxidation of organic compounds, from different sites of 2ME were examined. A similar study was conducted for the isoelectronic n-butanol to highlight the consequences of replacing the ϒ CH₂ group by an oxygen atom on the thermodynamic and kinetic parameters of the oxidation processes. Rate coefficients were calculated from the transition state theory. Our calculations show that energy barriers for n-butanol oxidation increase in the order of α ‹ O ‹ ϒ ‹ β ‹ ξ, which are consistent with previous data. However, for 2ME the energy barriers increase in the order α ‹ β ‹ ξ ‹ O. At elevated temperatures, a slightly high total abstraction rate is observed for the bifunctional 2ME (4 abstraction positions) over n-butanol (5 abstraction positions).

Thermochemistry and Kinetics of the Thermal Degradation of 2-Methoxyethanol as Possible Biofuel Additives

Oxygenated organic compounds derived from biomass (biofuel) are a promising alternative renewable energy resource. Alcohols are widely used as biofuels, but studies on bifunctional alcohols are still limited. This work investigates the unimolecular thermal degradation of 2-methoxyethanol (2ME) using DFT/BMK and ab initio (CBS-QB3 and G3) methods. Enthalpies of the formation of 2ME and its decomposition species have been calculated. Conventional transition state theory has been used to estimate the rate constant of the pyrolysis of 2ME over a temperature range of 298–2000 K. Production of methoxyethene via 1,3-H atom transfer represents the most kinetically favored path in the course of 2ME pyrolysis at room temperature and requires less energy than the weakest C_α − C_β simple bond fission. Thermodynamically, the most preferred channel is methane and glycoladhyde formation. A ninefold frequency factor gives a superiority of the C_α − C_β bond breaking over the C_γ − O_β bond fission despite comparable activation energies of these two processes.

Influence of chlorine coordination number on the catalytic mechanism of ruthenium chloride catalysts in the acetylene hydrochlorination reaction: a DFT study

Among Ru₃Cl₉, Ru₃Cl₇, Ru₅Cl₇, Ru₃Cl₃ and Ru₃ catalytic models, Ru₅Cl₇ performs best. In Ru₅Cl₇, the low chloride-coordinated Ru is responsible for activating reactants and adding H to C₂H₂, while the high coordinated is responsible for providing Cl to C₂H₃˙.

A Theoretical Study of the Mechanism and Kinetics of the Thermal Decomposition of Carbamoyl Azide

The mechanism and kinetics of the thermal decomposition of carbamoyl azide N3CONH2were studied using the B3LYP/6-311++G(d,p) level of theory. All species involved in the pyrolysis reaction were fully optimised and corrected for zero-point energies. The results showed that the initial step mainly involved the non-homolytic fission of the N–N bond. Either the imine NHCONH or the nitrene NCONH2could be formed by the release of molecular N2. Calculation confirmed that the formation of the nitrene is the dominant process. Then, extrusion of CO from the nitrene will produce NNH2which decomposes to N2and H2as the most stable products. Transition states (TSs) are obtained and characterised on the potential energy surfaces throughout the reaction. The existence of TSs on the corresponding potential energy surfaces is ascertained by performing intrinsic reaction coordinate calculations. In all steps, comparing the bond dissociation energies suggests which one is stronger during the initiation of thermolysis. The calculated rate constant using transition state theory is 1.15 × 10−28s−1at 298.15 K and 1.00 atm.