Modeling the Nonradiative Decay Rate of Electronically Excited Thioflavin T

Matrix Dynamics and Their Crucial Role in Non-radiative Decay during Thermally Activated Delayed Fluorescence

We investigated the interplay of matrix dynamics with the molecular dynamics of a thermally activated delayed fluorescence (TADF) emitter, NAI-DMAC, to identify factors that influence the photophysical processes leading to TADF. The matrix dynamics surrounding NAI-DMAC molecules were varied continuously from the liquid to the solid state by depositing toluene solutions containing poly(methyl methacrylate) (PMMA) and NAI-DMAC onto optical substrates. We monitored changes of the NAI-DMAC emission as the liquid films dried to form solid PMMA films using temperature- and time-resolved photoluminescence spectroscopy. We observed that, in low-viscosity solutions, the proportion of delayed fluorescence from NAI-DMAC was much smaller than that of prompt fluorescence, indicating that negligible TADF occurred in the low-viscosity environment. However, as the viscosity of the environment diverged at the final stages of dry-down to form solid PMMA films, the delayed fluorescence component of NAI-DMAC emission was extended to longer time scales and increased in amplitude relative to prompt emission as the temperature increased─signatures that TADF occurred in the solid state as expected. Our findings reveal the influence that matrix dynamics have on the competition between conformational motion needed to access emissive states and undergo TADF versus larger amplitude structural fluctuations that lead to non-radiative decay. Insights from these studies will inform ongoing work to understand and predict how host matrices used in organic light-emitting devices can be designed to maximize the radiative properties of TADF emitters by allowing molecular motion needed to undergo TADF while restricting larger amplitude motion leading to non-radiative decay.

Thioflavin-T: A Quantum Yield-Based Molecular Viscometer for Glycerol-Monohydroxy Alcohol Mixtures

Molecular rotor dye thioflavin T (ThT) is almost nonfluorescent in low-viscosity solvents but highly fluorescent when bound to amyloid fibrils. This unique property arises from the rotation of the dimethylaniline moiety relative to the benzothiazole moiety in the excited state, which drives the dye from an emissive locally excited state to a twisted intramolecular charge-transfer state. This process is viscosity-controlled, and therefore, we can use the quantum yield of ThT to assess the viscosity of the environment. In this study, we have investigated the quantum yield of ThT (φThT) in various compositions of six alcoholic solvent mixtures of glycerol with methanol, ethanol, n-propanol, iso-propanol, n-butanol, and tert-butanol. We have proposed an empirical model using φThT as a function of the mole fraction of glycerol to estimate the interaction parameters between the components of the solvent mixtures. This analysis allowed us to predict the extent of nonideality of the solvent mixtures. The Förster-Hoffmann- and Loutfy-Arnold-type power law relationship was established between the quantum yield of ThT and bulk viscosity for solvent mixtures of methanol, ethanol, n-butanol, and tert-butanol with glycerol, and it was found to be similar in nature in all the four mixtures. Applying this knowledge, we proposed a methodology to quantify and predict the bulk viscosity coefficient values of several compositions of n-propanol-glycerol and iso-propanol-glycerol mixtures which have not been previously documented.

Electroabsorption and Stark Fluorescence Spectroscopies of Thioflavin T

Thioflavin T (ThT) is a typical fluorescent marker for detecting the formation of amyloid fibrils, because its fluorescence intensity increases by more than 2 orders of magnitude upon complexation with the fibrils. Strong electrostatic fields on protein surfaces are known to be a significant factor in chemical reactions and biological functions. Therefore, ThT bound to amyloid fibrils must experience strong electric fields. This study employed electroabsorption and Stark fluorescence spectroscopies to clarify the effects of external electric fields on the photophysics of ThT. The absorption spectrum shows two bands ascribed to locally excited (LE) and charge transfer (CT) states. Coupling between the LE and CT states is enhanced in the presence of an external electric field, resulting in fluorescence quenching. The electric field strength of the amyloid fibril surface was inferred from the fluorescence quenching efficiency of ThT.

Altered relaxation dynamics of excited state reactions by confinement in reverse micelles probed by ultrafast fluorescence up-conversion

Chemical reactions in confined environments are important in areas as diverse as heterogenous catalysis, environmental chemistry and biochemistry, yet they are much less well understood than the equivalent reactions in either the gas phase or in free solution. The understanding of chemical reactions in solution was greatly enhanced by real time studies of model reactions, through ultrafast spectroscopy (especially when supported by molecular dynamics simulation). Here we review some of the efforts that have been made to adapt this approach to the investigation of reactions in confined media. Specifically, we review the application of ultrafast fluorescence spectroscopy to measure reaction dynamics in the nanoconfined water phase of reverse micelles, as a function of the droplet radius and the charge on the interface. Methods of measurement and modelling of the reactions are outlined. In all of the cases studied (which are focused on ultrafast intramolecular reactions) the effect of confinement was to suppress the reaction. Even in the largest micelles the result in the bulk aqueous phase was not usually recovered, suggesting an important role for specific interactions between reactant and environment, for example at the interface. There was no simple one-to-one correspondence with direct measures of the dynamics of the confined phase. Thus, understanding the effect of confinement on reaction rate appears to require not only knowledge of the dynamics of the reaction in solutions and the effect of confinement on the medium, but also of the interaction between reactant and confining medium.

Solvent effect on excited state potential energy surfaces of Thioflavin T. Qualitatively different results by TDDFT and SA-2-CASSCF methods

Thioflavin T (ThT) is a viscosity-sensitive fluorescent dye and its emission intensity undergoes a significant enhancement upon binding to DNA or amyloid fibrils. This fluorescence light-up feature has been attributed earlier to restriction of structural rearrangements in the excited state that are coupled to an intramolecular charge transfer (ICT) reaction. In this work TDDFT (using B3LYP and CAM-B3LYP functionals) and SA-2-CASSCF calculations were carried out to obtain relaxed excited-state potential energy surfaces (PES) along twisting φ and wagging δ angles that describe mutual orientation of benzothiazole (BTZ) and dimethylaniline (DMA) fragments in ThT. For isolated ThT molecule both methods predict that during structural rearrangements of the initially excited Franck-Condon state, besides twisting along CC bond which connects BTZ and DMA fragments, a considerable wagging motion is expected to occur. Account for solvent effect using polarized continuum model showed qualitative differences in the excited state PES features calculated by SA-2-CASSCF and TDDFT methods. Single-reference TDDFT calculations failed to describe solvation of TICT state and predicted increase of its energy in more polar media.

General Approach to Coupled Reactive Smoluchowski Equations: Integration and Application of Discrete Variable Representation and Generalized Coordinate Methods to Diffusive Problems

A new and more general approach to diffusion problems with the inclusion of reactivity among different coupled diffusional states is rationalized and presented. The integration of our previous developments in such a field [Phys. Chem. Chem. Phys., 2015, 17, 17362-17374; J. Chem. Theory Comput., 2016, 12, 3482-3490] are implemented in a software package tool allowing the generic user to set up and run diffusional calculations with very low efforts. We show the applicability of the whole framework to a generic diffusional case of chemical interest that is the study case of (N,N-dimethylamino)benzonitrile (DMABN) fluorescence, whose excited state undergoes twisted intramolecular charge transfer (TICT) relaxation. The population dynamics of the excited state coupled to the ground state is followed, and a fluorescence decay spectrum is calculated. The theoretical and numerical background here presented is robust and general enough to complement a wide number of diffusional problems of current interest.

Thioflavin T fluoresces as excimer in highly concentrated aqueous solutions and as monomer being incorporated in amyloid fibrils

Fluorescence of thioflavin T (ThT) is a proven tool for amyloid fibrils study. The correct model of ThT binding to fibrils is crucial to clarify amyloid fibrils structure and mechanism of their formation. Although there are convincing evidences that ThT has molecular rotor nature, implying it's binding to fibrils in monomer form, speculations concerning ThT binding to fibrils in aggregated forms appear in literature so far. The elaborated approach for fluorescence intensity correction on the inner filter effects applied to ThT aqueous solutions with a wide range of concentration allowed characterizing ThT excimers fluorescence and showing its difference from that of ThT bound to fibrils. Obtained results experimentally prove the monomer model of ThT binding to amyloid fibrils and demonstrate wide capacity of the used approach in the spectroscopy of other fluorescent dyes for examination of concentration self-quenching and deformation of fluorescence spectra, dye molecules interaction, dimers and excimers formation.

Quantitative Viscosity Mapping Using Fluorescence Lifetime Measurements

Lubricant viscosity is a key driver in both the tribological performance and energy efficiency of a lubricated contact. Elastohydrodynamic (EHD) lubrication produces very high pressures and shear rates, conditions hard to replicate using conventional rheometry. In situ rheological measurements within a typical contact are therefore important to investigate how a fluid behaves under such conditions. Molecular rotors provide such an opportunity to extract the local viscosity of a fluid under EHD lubrication. The validity of such an application is shown by comparing local viscosity measurements obtained using molecular rotors and fluorescence lifetime measurements, in a model EHD lubricant, with reference measurements using conventional rheometry techniques. The appropriateness of standard methods used in tribology for high-pressure rheometry (combining friction and film thickness measurements) has been verified when the flow of EHD lubricant is homogeneous and linear. A simple procedure for calibrating the fluorescence lifetime of molecular rotors at elevated pressure for viscosity measurements is proposed.

Toward a General Yet Effective Computational Approach for Diffusive Problems: Variable Diffusion Tensor and DVR Solution of the Smoluchowski Equation along a General One-Dimensional Coordinate

A generalization to arbitrary large amplitude motions of a recent approach to the evaluation of diffusion tensors [ J. Comput. Chem. , 2009 , 30 , 2 - 13 ] is presented and implemented in a widely available package for electronic structure computations. A fully black-box tool is obtained, which, starting from the generation of geometric structures along different kinds of paths, proceeds toward the evaluation of an effective diffusion tensor and to the solution of one-dimensional Smoluchowski equations by a robust numerical approach rooted in the discrete variable representation (DVR). Application to a number of case studies shows that the results issuing from our approach are identical to those delivered by previous software (in particular DiTe) for rigid scans along a dihedral angle, but can be improved by employing relaxed scans (i.e., constrained geometry optimizations) or even more general large amplitude paths. The theoretical and numerical background is robust and general enough to allow quite straightforward extensions in several directions (e.g., inclusion of reactive paths, solution of Fokker-Planck or stochastic Liouville equations, multidimensional problems, free-energy rather than electronic-energy driven processes).

High Fluorescence Anisotropy of Thioflavin T in Aqueous Solution Resulting from Its Molecular Rotor Nature

Thioflavin T (ThT) is widely used to study amyloid fibrils while its properties are still debated in the literature. By steady-state and femtosecond time-resolved fluorescence we showed that, unlike small sized rigid molecules, the fluorescence anisotropy value of the free ThT in aqueous solutions is very high, close to the limiting value. This is determined by the molecular rotor nature of ThT, where the direction of the ThT transition dipole moment S₀ → S₁* is not changed either by the internal rotation of the ThT benzothiazole and aminobenzene rings relative to each other in the excited state, because the axis of this rotation coincides with the direction of the transition dipole moment, or by the rotation of the ThT molecule as a whole, because the rate of this process is 3 orders of magnitude smaller than the rate of the internal rotation which leads to the fluorescence quenching. Consequently, ThT fluorescence anisotropy cannot be directly used to study amyloid fibrils formation, as it was proposed by some authors.

Valence-bond non-equilibrium solvation model for a twisting monomethine cyanine

We propose and analyze a two-state valence-bond model of non-equilibrium solvation effects on the excited-state twisting reaction of monomethine cyanines. Suppression of this reaction is thought responsible for environment-dependent fluorescence yield enhancement in these dyes. Fluorescence is quenched because twisting is accompanied via the formation of dark twisted intramolecular charge-transfer (TICT) states. For monomethine cyanines, where the ground state is a superposition of structures with different bond and charge localizations, there are two possible twisting pathways with different charge localizations in the excited state. For parameters corresponding to symmetric monomethines, the model predicts two low-energy twisting channels on the excited-state surface, which leads to a manifold of TICT states. For typical monomethines, twisting on the excited state surface will occur with a small barrier or no barrier. Changes in the solvation configuration can differentially stabilize TICT states in channels corresponding to different bonds, and that the position of a conical intersection between adiabatic states moves in response to solvation to stabilize either one channel or the other. There is a conical intersection seam that grows along the bottom of the excited-state potential with increasing solvent polarity. For monomethine cyanines with modest-sized terminal groups in moderately polar solution, the bottom of the excited-state potential surface is completely spanned by a conical intersection seam.

Effect of acidic and basic pH on Thioflavin T absorbance and fluorescence

Thioflavin T (ThT) is a fluorescent dye able to enhance significantly its fluorescence quantum yield upon binding to protein amyloids. ThT assay is widely used to detect and quantify amyloids in a variety of conditions, including solutions with different pH levels. In the present work, the effect of acidic and basic pH on the conformation of the ThT molecule and its absorption and fluorescence properties was studied. The results show that both acidic and basic pH decrease significantly the intensity of ThT absorption in the visible region and fluorescence emission intensity. Low pHs induce an immediate "all-or-nothing" decrease in the ThT signal, while in alkaline solutions the ThT signal decreases gradually over time. pH-induced signal quenching is less in the presence of glycerol or protein aggregates. Two different mechanisms are responsible for the ThT signal quenching-the ThT hydroxylation at basic pH and protonation of the nitrogen atom of the dimethylamino group at acidic pH. ThT assays should be carefully carried out at basic or acidic pH as strong pH dependence of ThT could be responsible for misinterpretation and false positive/negative experimental results. The potential unsuitability of ThT as a probe in solutions with high pH (>9) has been shown.

Fast photoinduced reactions in the condensed phase are nonexponential

Time-resolved measurements of photoinduced reactions reveal that many ultrafast reactions in the femto- to picosecond time scale are nonexponential. In this article we provide several examples of reactions that exhibit a nonexponential rate. We explain the wide range of the nonexponential reaction by the lack of time separation between τ(s), the characteristic fast equilibration time of the population in the reactant potential well, and the longer time τ(e), the characteristic time to cross the energy barrier between the reactant and the product.

Ultrafast twisting dynamics of thioflavin-T: spectroscopy of the twisted intramolecular charge-transfer state

Understanding the excited-state properties of thioflavin-T (ThT) has been of immense importance, because of its efficient amyloid-sensing ability related to neurodegenerative disorders. The excited-state dynamics of ThT is studied by using sub-pico- and nanosecond time-resolved transient absorption techniques as well as density functional theory (DFT)/time-dependent DFT calculations. Barrierless twisting around the central C-C bond between two aromatic moieties is the dominant process that contributes to the ultrafast dynamics of the S1 state. The spectroscopic properties of the intramolecular charge-transfer state are characterized for the first time. The energetics of the S0 and S1 states has also been correlated with the experimentally observed spectroscopic parameters and structural dynamics. A longer-lived transient state populated with a very low yield has been characterized as the triplet state.

Wagging motion of hydrogen-bonded wire in the excited-state multiple proton transfer process of 7-hydroxyquinoline·(NH3)3 cluster

In this work, the dynamics of hydrogen bonds (as well as the hydrogen-bonded wire) in excited-state tautomerization of 7-hydroxyquinoline·(NH3)3 (7HQ·(NH3)3) cluster has been investigated by using time-dependent density functional theory (TDDFT). It shows that upon an excitation, the hydrogen bond between -OH group in 7-hydroxyquinoline (7HQ) and NH3 moiety would extremely strengthened in S1 state, which could effectively facilitate the releasing of the proton from the phenolic group of 7HQ moiety to the hydrogen-bonded wire and the forming an Eigen-like cationic wire (NH3···NH4(+)···NH3) in the cluster. To fulfill the different optimal angles of NH4(+) in the wire, a wagging motion of hydrogen-bonded wire would occur in excited state. Moreover, the wagging motion of the hydrogen-bonded wire would effectively promote excited-state proton transfer reaction. As the results, an excited-state multiple proton transfer (ESMPT) mechanism containing two concerted and asymmetrical processes has been proposed for the proton transfer dynamics of 7HQ·(NH3)3 cluster.

Time resolved photoelectron spectroscopy of thioflavin T photoisomerization: a simulation study

The excited state isomerization of thioflavin T (ThT) is responsible for the quenching of its fluorescence in a nonrestricted environment. The fluorescence quantum yield increases substantially upon binding to amyloid fibers. Simulations reveal that the variation of the twisting angle between benzothiazole and benzene groups (φ1) is responsible for the subpicosecond fluorescence quenching. The evolution of the twisting process can be directly probed by photoelectron emission with energies ε ≥ 1.0 eV before the molecule reaches the φ1-twisted configuration (~300 fs).

Thioflavin T and its photoirradiative derivatives: exploring their spectroscopic properties in the absence and presence of amyloid fibrils

In this work, we found that, during storage or after UV irradiation, ThT is demethylated or oxidized, forming three derivatives. These three derivatives were purified by high performance liquid chromatography and characterized by mass and nuclear magnetic resonance spectroscopy and the spectroscopic properties of pure ThT and the derivatives carefully compared. Our results show that the emission peak at 450 nm results from oxidized ThT and not from the monomeric form of ThT, as previously proposed. The partial conversion of ThT into oxidized and demethylated derivatives has an effect on amyloid detection using ThT assay. Irradiated ThT has the same lag time as pure ThT in the amyloidogenesis of insulin, but the intensity of the emitted fluorescence is significantly decreased.

Temperature and viscosity dependence of the nonradiative decay rates of auramine-O and thioflavin-T in glass-forming solvents

Both auramine-O (AuO) and thioflavin-T (ThT) behave as fluorescent molecular rotors, meaning that their (non)radiative properties are markedly affected by the intramolecular rotation of the molecule. In this article, steady-state and time-resolved fluorescence of AuO and ThT were measured in three alcohols, 1-propanol, 1-butanol, and 1-pentanol, over a wide range of temperatures (86-260 K). These solvents are glass-forming liquids, and their viscosity and dielectric relaxation time increase by more than 10 orders of magnitude as the temperature is lowered from room temperature to ~100 K. Accordingly, the fluorescence nonradiative rates constants of AuO and ThT in these solvents decrease by about 3 orders of magnitude at the latter temperature range. We found very good correspondence between the temperature dependence of the nonradiative rate constant, k(nr), of both molecules and the dielectric relaxation rate of the solvents. The k(nr) values of AuO are twice those of ThT along the whole temperature range. The temperature dependence of k(nr) is consistent with the nonradiative model suggested by Glasbeek and co-workers.

Molecular rotors: what lies behind the high sensitivity of the thioflavin-T fluorescent marker

Thioflavin-T (ThT) can bind to amyloid fibrils and is frequently used as a fluorescent marker for in vitro biomedical assays of the potency of inhibitors for amyloid-related diseases, such as Alzheimer's disease, Parkinson's disease, and amyloidosis. Upon binding to amyloid fibrils, the steady-state (time-integrated) emission intensity of ThT increases by orders of magnitude. The simplicity of this type of measurement has made ThT a common fluorescent marker in biomedical research over the last 50 years. As a result of the remarkable development in ultrafast spectroscopy measurements, researchers have made substantial progress in understanding the photophysical nature of ThT. Both ab initio quantum-mechanical calculations and experimental evidence have shown that the electronically excited-state surface potential of ThT is composed of two regimes: a locally excited (LE) state and a charge-transfer (CT) state. The electronic wave function of the excited state changes from the initial LE state to the CT state as a result of the rotation around a single C-C bond in the middle of the molecule, which connects the benzothiazole moiety to the dimethylanilino ring. This twisted-internal-CT (TICT) is responsible for the molecular rotor behavior of ThT. This Account discusses several factors that can influence the LE-TICT dynamics of the excited state. Solvent, temperature, and hydrostatic pressure play roles in this process. In the context of biomedical assays, the binding to amyloid fibrils inhibits the internal rotation of the molecular segments and as a result, the electron cannot cross into the nonradiative "dark" CT state. The LE state has high oscillator strength that enables radiative excited-state relaxation to the ground state. This process makes the ThT molecule light up in the presence of amyloid fibrils. In the literature, researchers have suggested several models to explain nonradiative processes. We discuss the advantages and disadvantages of the various nonradiative models while focusing on the model that was initially proposed by Glasbeek and co-workers for auramine-O to be the best suited for ThT. We further discuss the computational fitting of the model for the nonradiative process of ThT.