Understanding Three Hydration-Dependent Transitions of Zwitterionic Carboxybetaine Hydrogel by Molecular Dynamics Simulations

Self-Adhesive, Strong Antifouling, and Mechanically Reinforced Methacrylate Hyaluronic Acid Cross-Linked Carboxybetaine Zwitterionic Hydrogels

Hyaluronic acid and zwitterionic hydrogels are soft materials with poor mechanical properties. The unique structures and physiological properties make them attractive candidates for ideal hydrogel dressings, but the crux of lacking satisfying mechanical strengths and adhesive properties is still pendent. In this study, the physical cross-linking of dipole-dipole interactions of zwitterionic pairs was utilized to enhance the mechanical properties of hydrogels. The hydrogels have been prepared by copolymerizing methacrylate hyaluronic (HAGMA) with carboxybetaine methacrylamide (CBMAA) (the mass ratio of [HAGMA]/[CBMAA] is 2:5, 1:5, 1:10, or 1:20), obtaining HA-CB2.5, HA-CB5.0, HA-CB10.0, or HA-CB20.0 hydrogel. Therein, the HA-CB20.0 hydrogel with a high CBMAA content can generate a strong dipole-dipole interaction to form internal physical cross-links, exhibit stretchability and low elastic modulus, and withstand 99% compressive deformation and cyclic compression under strain at 90%. Moreover, the HA-CB20.0 hydrogel is adhesive to diverse substrates, including skin, glass, stainless steel, and plastic. The synergistic effect of HAGMA and CBMAA shows strong anti-biofouling, high water absorption, biodegradability under hyaluronidase, and biocompatibility.

Three-Dimensional Printable, Highly Conductive Ionic Elastomers for High-Sensitivity Iontronics

The development of hydrogels and ionic gels for applications in fields such as soft electronics and wearable sensors is limited by liquid evaporation or leakage. Ionic conductors without volatile liquids are better choices for flexible and transparent devices. Here, a liquid polymer electrolyte (LPE) is prepared from a mixture of lithium bis(trifluoromethane)sulfonimide and polyethylene glycol (PEG) above the melting point of PEG. A three-dimensional (3D) printable solvent-free ionic elastomer (IE) is introduced by photopolymerization of ethyl acrylate and hydroxyethyl acrylate in the prepared LPE. The conductivity is significantly improved by the presence of a high content of the lithium salt. Dynamic cross-linking networks improve the stretchability and resilience of the elastomer. The pattern design capability of the IE is provided by light-curing 3D printing. These features demonstrate that the IE has broad application prospects in flexible sensors, ion skins, and soft robots.

Molecular simulations and understanding of antifouling zwitterionic polymer brushes

Zwitterionic materials are an important class of antifouling biomaterials for various applications. Despite such desirable antifouling properties, molecular-level understanding of the structure-property relationship associated with surface chemistry/topology/hydration and antifouling performance still remains to be elucidated. In this work, we computationally studied the packing structure, surface hydration, and antifouling property of three zwitterionic polymer brushes of poly(carboxybetaine methacrylate) (pCBMA), poly(sulfobetaine methacrylate) (pSBMA), and poly((2-(methacryloyloxy)ethyl)phosporylcoline) (pMPC) brushes and a hydrophilic PEG brush using a combination of molecular mechanics (MM), Monte Carlo (MC), molecular dynamics (MD), and steered MD (SMD) simulations. We for the first time determined the optimal packing structures of all polymer brushes from a wide variety of unit cells and chain orientations in a complex energy landscape. Under the optimal packing structures, MD simulations were further conducted to study the structure, dynamics, and orientation of water molecules and protein adsorption on the four polymer brushes, while SMD simulations to study the surface resistance of the polymer brushes to a protein. The collective results consistently revealed that the three zwitterionic brushes exhibited stronger interactions with water molecules and higher surface resistance to a protein than the PEG brush. It was concluded that both the carbon space length between zwitterionic groups and the nature of the anionic groups have a distinct effect on the antifouling performance, leading to the following antifouling ranking of pCBMA > pMPC > pSBMA. This work hopefully provides some structural insights into the design of new antifouling materials beyond traditional PEG-based antifouling materials.

From Microscale to Macroscale: Nine Orders of Magnitude for a Comprehensive Modeling of Hydrogels for Controlled Drug Delivery

Because of their inherent biocompatibility and tailorable network design, hydrogels meet an increasing interest as biomaterials for the fabrication of controlled drug delivery devices. In this regard, mathematical modeling can highlight release mechanisms and governing phenomena, thus gaining a key role as complementary tool for experimental activity. Starting from the seminal contribution given by Flory-Rehner equation back in 1943 for the determination of matrix structural properties, over more than 70 years, hydrogel modeling has not only taken advantage of new theories and the increasing computational power, but also of the methods offered by computational chemistry, which provide details at the fundamental molecular level. Simulation techniques such as molecular dynamics act as a "computational microscope" and allow for obtaining a new and deeper understanding of the specific interactions between the solute and the polymer, opening new exciting possibilities for an in silico network design at the molecular scale. Moreover, system modeling constitutes an essential step within the "safety by design" paradigm that is becoming one of the new regulatory standard requirements also in the field-controlled release devices. This review aims at providing a summary of the most frequently used modeling approaches (molecular dynamics, coarse-grained models, Brownian dynamics, dissipative particle dynamics, Monte Carlo simulations, and mass conservation equations), which are here classified according to the characteristic length scale. The outcomes and the opportunities of each approach are compared and discussed with selected examples from literature.

Blood-Compatible Surfaces with Phosphorylcholine-Based Polymers for Cardiovascular Medical Devices

For the acquisition of blood-compatible materials, various hydrophilic polymers for surface modification have been examined. Among them, polymers with a representative phospholipid polar group, the phosphorylcholine (PC) group, are a successful example. These polymers were designed from inspiration of the cell membrane surface and provide protein adsorption resistance even following contact with plasma. This important property is based on the unique hydration state of water molecules surrounding hydrated polymer; in other words, water molecules weakly interact with the polymers and maintain their favorable cluster structure through hydrogen bonding. These polymers are not only hydrophilic, but also electrically neutral, important characteristics which make hydrogen bonding with water molecules less likely to occur and avoid hydrophobic interactions. Phosphorylcholine groups and other zwitterionic structures are significant as hydrophilic functional groups meeting these important requirements. In this review, blood compatibility of a polymer having a PC group is introduced in relation to its hydration structure, followed by a description of the applications of this polymer to cardiovascular medical devices.

Understanding hydrogelation processes through molecular dynamics

Molecular dynamics (MD) is currently one of the preferred techniques employed to understand hydrogelation processes for its ability to include large amounts of atoms in computational calculations, since substantial amounts of solvent molecules are involved in gel formation.

Salt-Responsive Bilayer Hydrogels with Pseudo-Double-Network Structure Actuated by Polyelectrolyte and Antipolyelectrolyte Effects

Development of stimuli-responsive, shape-transformable materials is fundamentally and practically important for smart actuators. Herein, we design and synthesize a bilayer hydrogel by assembling a polycationic (polyMETAC/HEAA) layer with polyelectrolyte effect and a polyzwitterionic (polyVBIPS) layer with antipolyelectrolyte effect together. The bilayer hydrogels adopt a pseudo-double-network structure, and both polyelectrolyte and polyzwitterionic layers have salt-responsive swelling and shrinkage properties, but in a completely opposite way. The resulting polyMETAC/HEAA-polyVBIPS bilayer hydrogels exhibit bidirectional bending in response to salt solutions, salt concentrations, and counterion types. Such bidirectional bending of this bilayer hydrogel is fully reversible and triggered between salt solution and pure water multiple times. The bending orientation and degree of the bilayer hydrogel is driven by the opposite volume changes between the volume shrinking (swelling) of polyMETAC/HEAA layer and the volume swelling (shrinking) of polyVBIPS layer. Such cooperative, not competitive, salt-responsive swelling-shrinking properties of the two layers are contributed to by the polyelectrolyte and antipolyelectrolyte effects from the respective layers. Moreover, an eight-arm gripper made of this bilayer hydrogel is fabricated and demonstrates its ability to grasp an object in salt solution and release the object in water. This work provides a new shape-regulated, stimuli-responsive asymmetric hydrogel for actuator-based applications.