Experimental and Molecular Modeling Study of the Three-Phase Behavior of (n-Decane + Carbon Dioxide + Water) at Reservoir Conditions

Interfacial properties of the hexane + carbon dioxide + water system in the presence of hydrophilic silica

Molecular dynamics simulations were conducted to study the interfacial behavior of the CO₂ + H₂O and hexane + CO₂ + H₂O systems in the presence of hydrophilic silica at geological conditions. Simulation results for the CO₂ + H₂O and hexane + CO₂ + H₂O systems are in reasonable agreement with the theoretical predictions based on the density functional theory. In general, the interfacial tension (IFT) of the CO₂ + H₂O system exponentially (linearly) decreased with increasing pressure (temperature). The IFTs of the hexane + CO₂ + H₂O (two-phase) system decreased with the increasing mole fraction of CO₂ in the hexane/CO₂-rich phase x_CO2 . Here, the negative surface excesses of hexane lead to a general increase in the IFTs with increasing pressure. The effect of pressure on these IFTs decreased with increasing x_CO2 due to the positive surface excesses of carbon dioxide. The simulated water contact angles of the CO₂ + H₂O + silica system fall in the range from 43.8° to 76.0°, which is in reasonable agreement with the experimental results. These contact angles increased with pressure and decreased with temperature. Here, the adhesion tensions are influenced by the variations in fluid-fluid IFT and contact angle. The simulated water contact angles of the hexane + H₂O + silica system fall in the range from 58.0° to 77.0° and are not much affected by the addition of CO₂. These contact angles increased with pressure, and the pressure effect was less pronounced at lower temperatures. Here, the adhesion tensions are mostly influenced by variations in the fluid-fluid IFTs. In all studied cases, CO₂ molecules could penetrate into the interfacial region between the water droplet and the silica surface.

Interfacial behavior of the decane + brine + surfactant system in the presence of carbon dioxide, methane, and their mixture

Molecular dynamics simulations are carried out to get insights into the interfacial behavior of the decane + brine + surfactant + CH₄ + CO₂ system at reservoir conditions. Our results show that the addition of CH₄, CO₂, and sodium dodecyl sulfate (SDS) surfactant at the interface reduces the IFTs of the decane + water and decane + brine (NaCl) systems. Here the influence of methane was found to be less pronounced than that of carbon dioxide. As expected, the addition of salt increases the IFTs of the decane + water + surfactant and decane + water + surfactant + CH₄/CO₂ systems. The IFTs of these surfactant-containing systems decrease with temperature and the influence of pressure is found to be less pronounced. The atomic density profiles show that the sulfate head groups of the SDS molecules penetrate the water-rich phase and their alkyl tails are stretched into the decane-rich phase. The sodium counterions of the surfactant molecules are located very close to their head groups. Furthermore, the density profiles of water and salt ions are hardly affected by the presence of the SDS molecules. However, the interfacial thickness between water and decane/CH₄/CO₂ molecules increases with increasing surfactant concentration. An important result is that the enrichment of CH₄ and/or CO₂ in the interfacial region decreases with increasing surfactant concentration. These results may be useful in the context of the water-alternating-gas approach that has been utilized during CO₂-enhanced oil recovery operations.

Bulk and Interfacial Properties of the Decane + Water System in the Presence of Methane, Carbon Dioxide, and Their Mixture

Molecular dynamics simulations are carried out to study the two-phase behavior of the n-decane + water system in the presence of methane, carbon dioxide, and their mixture under reservoir conditions. The simulation studies were complemented by theoretical modeling using the perturbed-chain statistical associating fluid theory (PC-SAFT) equation of state (EoS) and density gradient theory. Our results show that the presence of methane and carbon dioxide decreases the interfacial tension (IFT) of the decane + water system. In general, the IFT increases with increasing pressure and decreasing temperature for the methane + decane + water and carbon dioxide + decane + water systems, similar to what has been found for the corresponding decane + water system. The most important finding of this study is that the presence of carbon dioxide decreases the IFT of the methane + decane + water system. The atomic density profiles provide evidence of the local accumulation of methane and carbon dioxide at the interface, in most of the studied systems. The results of this study show the preferential dissolution in the water-rich phase and enrichment at the interface for carbon dioxide in the methane + carbon dioxide + decane + water system. This indicates the preferential interaction of water with carbon dioxide relative to methane and decane. Notably, there is an enrichment of the interface by decane at high mole fractions of methane in the methane/decane-rich or methane/carbon dioxide/decane-rich phase. Overall, the solubility of methane and carbon dioxide in the water-rich phase increases with increasing pressure and temperature. Additionally, we find that the overall performance of the PC-SAFT EoS and the cubic-plus-association EoS is similar with respect to the calculation of bulk and interfacial properties of these systems.