Detection and Distinction of DNT and TNT with a Fluorescent Conjugated Polymer Using the Microwave Conductivity Technique

Polymers and Polymer-Based Materials for the Detection of (Nitro-)explosives

Methods for the remote detection of warfare agents and explosives have been in high demand in recent times. Among the several detection methods, fluorescence methods appear to be more convenient due to their low cost, simple operation, fast response time, and naked-eye-visible sensory response. For fluorescence methods, a large variety of fluorescent materials, such as small-molecule-based fluorophores, aggregation-induced emission fluorophores/materials, and supramolecular systems, have been reported in the literature. Among them, fluorescent (bio)polymers/(bio)polymer-based materials have gained wide attention due to their excellent mechanical properties and sensory performance, their ability to recognize explosives via different sensing mechanisms and their combinations, and, finally, the so-called amplification of the sensory response. This review provides the most up-to-date data on the utilization of polymers and polymer-based materials for the detection of nitroaromatic compounds (NACs)/nitro-explosives (NEs) in the last decade. The literature data have been arranged depending on the polymer type and/or sensory mechanism.

Luminescence-based detection and identification of illicit drugs

Luminescence-based sensing is capable of being used for the sensitive, rapid, and in some cases selective detection of chemicals. Furthermore, the method is amenable to incorporation into handheld low-power portable detectors that can be used in the field. Luminescence-based detectors are now commercially available for explosive detection with the technology built on a strong foundation of science. In contrast, there are fewer examples of luminescence-based detection of illicit drugs, despite the pervasive and global challenge of combating their manufacture, distribution and consumption and the need for handheld detection systems. This perspective describes the relatively nascent steps that have been reported in the use of luminescent materials for the detection of illicit drugs. Much of the published work has focused on detection of illicit drugs in solution with less work on vapour detection using thin luminescent sensing films. The latter are better suited for handheld sensing devices and detection in the field. Illicit drug detection has been achieved via different mechanisms, all of which change the luminescence of the sensing material. These include photoinduced hole transfer (PHT) leading to quenching of the luminescence, disruption of Förster energy transfer between different chromophores by a drug, and chemical reaction between the sensing material and a drug. The most promising of these is PHT, which can be used for rapid and reversible detection of illicit drugs in solution and film-based sensing of drugs in the vapour phase. However, there are still significant knowledge gaps, for example, how vapours of illicit drugs interact with the sensing films, and how to achieve selectivity for specific drugs.

A water-soluble small molecular fluorescent sensor based on phosphazene platform for selective detection of nitroaromatic compounds

Nitro-aromatic compounds have a deleterious effect on the environment and they are extremely explosive. Therefore, societal concern about exposure to nitro-aromatic compounds encourages researchers to develop selective and sensitive detection platforms for nitro-aromatic compounds in recent years. In this paper, a new 100% water-soluble cyclotriphosphazene-based bridged naphthalene material (4) was prepared as a small molecule fluorescent sensor for ultra-selective detection of nitro-aromatic compounds. The chemical structure of 4 was extensively characterized by mass spectrometry and nuclear magnetic resonance spectroscopies (³¹P, ¹³C, ¹H). The photo-physical properties of the newly developed sensing system were investigated by steady-state fluorescence and UV-Vis absorption spectroscopies. The fluorescence sensor behaviors were extensively evaluated after treatment with the most commonly used metal cations, anions, competitive aromatic compounds, saccharides, and organic acids. The developed fluorescent sensing system (4) demonstrated ultra-selective fluorescence "turn-off" signal change toward nitro-aromatic compounds while other tested competitive species caused negligible changes. To evaluate selectivity, time-resolved, steady-state 3D-fluorescence and UV-Vis absorption spectroscopies were used in fully aqueous media. Moreover, theoretical calculations (density functional theory and time-dependent density functional theory) were applied and discussed to identify fluorescence sensing mechanisms toward nitroaromatic compounds for the presented sensing system.

Protamine gold nanoclusters - based fluorescence turn-on sensor for rapid determination of Trinitrotoluene (TNT)

Determination of trace residues of 2,4,6-trinitrotoluene (TNT) is an analytical challenge as it is widely used in military, mining industry, civilian and counter-terrorism purposes. In this study, a gold nanocluster - based turn-on fluorescence sensor was developed for TNT determination. A one-pot approach was used to synthesize the fluorescent protamine - stabilized gold nanoclusters (PRT-AuNC). The proposed turn-on fluorometric sensor relies on the aggregation-induced emission enhancement mechanism. As a result of the donor-acceptor interaction between the non-fluorescent Meisenheimer anion formed from TNT and the amino groups of weakly fluorescent protamine, the PRT-AuNCs aggregate and an accompanying enhancement in fluorescence intensity is observed with a large Stokes shift (λ_ex = 300 nm, λ_em = 600 nm). The fluorescence enhancement increased linearly with TNT with an LOD of 12.44 µg/L. Similar energetic materials, common soil ions and explosive camouflage materials did not affect the proposed fluorometric sensing method. TNT in artificially contaminated soil was determined, and the results were comparable to those obtained by the HPLC-DAD system. The proposed turn-on sensor is an important tool for simple, fast, rapid and sensitive TNT determination, and has a potential to be converted to a kit format.

Constitutional isomers of dendrimer-like pyrene substituted cyclotriphosphazenes: synthesis, theoretical calculations, and use as fluorescence receptors for the detection of explosive nitroaromatics

Two constitutionally isomeric bis-pyrenyl phenol dendrons (4 and 6) and their dendrimer-like cyclotriphosphazene derivatives (5 and 7) are designed, synthesized and fluorescence detection behaviors are evaluated for nitro aromatic compounds (NACs).

Real-time fluorescence quenching-based detection of nitro-containing explosive vapours: what are the key processes?

The detection of explosives continues to be a pressing global challenge with many potential technologies being pursued by the scientific research community. Luminescence-based detection of explosive vapours with an organic semiconductor has attracted much interest because of its potential for detectors that have high sensitivity, compact form factor, simple operation and low-cost. Despite the abundance of literature on novel sensor materials systems there are relatively few mechanistic studies targeted towards vapour-based sensing. In this Perspective, we will review the progress that has been made in understanding the processes that control the real-time luminescence quenching of thin films by analyte vapours. These are the non-radiative quenching process by which the sensor exciton decays, the analyte-sensor intermolecular binding interaction, and the diffusion process for the analyte vapours in the film. We comment on the contributions of each of these processes towards the sensing response and, in particular, the relative roles of analyte diffusion and exciton diffusion. While the latter has been historically judged to be one of, if not the primary, causes for the high sensitivity of many conjugated polymers to nitrated vapours, recent evidence suggests that long exciton diffusion lengths are unnecessary. The implications of these results on the development of sensor materials for real-time detection are discussed.

Fabrication of amine and imine-functionalized isoreticular pillared-layer metal–organic frameworks for the highly selective detection of nitro-aromatics

Chemical sensors for the rapid and selective detection of explosives such as 2,4,6-trinitrotoluene (TNT) are very important.

Fluorescence based explosive detection: from mechanisms to sensory materials

The detection of explosives is one of the current pressing concerns in global security. In the past few decades, a large number of emissive sensing materials have been developed for the detection of explosives in vapor, solution, and solid states through fluorescence methods. In recent years, great efforts have been devoted to develop new fluorescent materials with various sensing mechanisms for detecting explosives in order to achieve super-sensitivity, ultra-selectivity, as well as fast response time. This review article starts with a brief introduction on various sensing mechanisms for fluorescence based explosive detection, and then summarizes in an exhaustive and systematic way the state-of-the-art of fluorescent materials for explosive detection with a focus on the research in the recent 5 years. A wide range of fluorescent materials, such as conjugated polymers, small fluorophores, supramolecular systems, bio-inspired materials and aggregation induced emission-active materials, and their sensing performance and sensing mechanism are the centerpiece of this review. Finally, conclusions and future outlook are presented and discussed.

AIE luminogen-functionalised mesoporous nanomaterials for efficient detection of volatile gases

Mesoporous silica nanoparticles functionalised with aggregation-induced emission (AIE) luminogen via a carbon-nitrogen double bond are fabricated into films by a dip-coating method. The as-made films can serve as efficient fluorescent sensors for the naked-eye detection of volatile acid gases by colour and emission changes, as well as for the detection of 2,4-dinitrotoluene vapours by fluorescence quenching.

Fluorescent thiophene-based materials and their outlook for emissive applications

An overview of fluorescent thiophene-based materials and their applications, highlighting in particular the various methods employed to achieve highly emissive materials.

Three independent channel nanohybrids as fluorescent probes

Pyrene-capped CdSe/ZnS nanohybrids permit a simple and rapid quantification of trinitrotoluene in the presence of interferents of the same chemical family.

Detection of high-energy compounds using photoluminescent silicon nanocrystal paper based sensors

Luminescent silicon nanocrystals (Si-NCs) surface functionalized with dodecyl groups were exposed to solutions of nitroaromatic compounds including nitrobenzene, nitrotoluene, and dinitrotoluene. It was found that Si-NC luminescence was quenched upon exposure to nitroaromatics via an electron transfer mechanism as indicated by Stern-Volmer analysis. This quenching was exploited and a straightforward paper-based Si-NC sensor was developed. This paper motif was found to be sensitive to solution, vapor, and solid phase nitroaromatics, as well as solution borne RDX and PETN.

Surface plasmon resonance enhanced upconversion luminescence in aqueous media for TNT selective detection

We present a novel report on a surface plasmon resonance enhanced upconversion luminescence strategy in aqueous media for highly sensitive and selective detection of 2,4,6-trinitrotoluene (TNT).

Fluorescent detection of TNT and 4-nitrophenol by BSA Au nanoclusters

Rapid and sensitive detection of 2,4,6-trinitrotoluene (TNT) and 4-nitrophenol (4-NP) has attracted considerable attention due to their wide applications as nitroaromatic explosive materials.

Molecular sensing: modulating molecular conduction through intermolecular interactions

We observe changes in the molecular conductivity of individual oligophenylene-vinylene (OPV) molecules due to interactions with small aromatic molecules. Fluorescence experiments were correlated with scanning tunneling microscopy measurements in order to determine the origin of the observed effect. Both nitrobenzene and 1,4-dinitrobenzene decreased fluorescence intensity and molecular conductivity, while toluene had no effect. The observed changes in the fluorescence and conduction of OPV correlate well with the electron withdrawing ability of the interacting aromatic molecules. These results demonstrate the potential usefulness of OPV as a sensor for aromatic compounds containing electron withdrawing groups.