Liquid–Liquid Extraction of Uranyl by an Amide Ligand: Interfacial Features Studied by MD and PMF Simulations

A comparison on the use of DEHBA or TBP as extracting agent for tetra- and hexavalent actinides in the CHALMEX Process

The Chalmers Grouped ActiNide EXtraction process is a solvent extraction process for the homogeneous recycling of spent nuclear fuel. The use of TBP for the extraction of tetra- and hexavalent actinides can be problematic for several reasons, including troublesome degradation products causing crud formation, decreased extraction yield and the possibility of explosive red oil reactions. Here, the substitution of TBP by a N,N-dialkyl monoamide, DEHBA, is investigated. The findings suggest that DEHBA can be a suitable extracting agent for use in the CHALMEX solvent, although identified drawbacks need to be further investigated.

Biphasic Behaviors of Nd3+ Bound with Cyanex272, Cyanex301, and Cyanex302: A Molecular Dynamics Simulation Study

By means of molecular dynamics simulations, this work addresses the conformational flexibility and migration of trivalent neodymium (Nd³⁺) coordinated with three or six titled (thio)phosphinic ligands and shows that the fluxionality of the complexes enables them to adapt to the solvent environment during the migration. Cyanex272 forms a more compact complex than the other two types of ligands and screens more significantly the interaction between the water solvent and the metal ion in the complex, which weakens the detainment of the aqueous environment. This results in faster motion of the Nd(C272)₃ complex both in its translation and rotation than the other complexes when migrating to the organic phase and wins over the other two ligands in transporting the metal ions from the aqueous phase to the organic phase. Depending on the solvent environment, these complexes may take two types of conformations to balance the forces from the environment benefited from their fluxionality. The migration of the M:L = 1:6 complexes, Nd[H(C272)₂]₃ and Nd[H(C301)₂]₃, was also investigated. The rich presence of the alkyl groups in the complexes screens the influence of the aqueous environment and benefits the transportation of metal ions to the interface. This work is expected to contribute to the community of inorganic chemistry interested in the coordination chemistry of metal ions and their behaviors in the condensed phase.

Hierarchical phenomena in multicomponent liquids: simulation methods, analysis, chemistry

Complex, multicomponent, solutions have often been studied solely through the lens of specific applications of interest. Yet advances to both simulation methodologies (enhanced sampling, etc.) and analysis techniques (network analysis algorithms and others), are creating a trove of data that reveal transcending characteristics across vast compositional phase space. This perspective discusses technical considerations of the reliable and accurate simulations of complex solutions, followed by the advances to analysis algorithms that elucidate coupling of different length and timescale behavior (hierarchical phenomena). The different manifestations of hierarchical phenomena are presented across an array of solution environments, emphasizing fundamental and ongoing science questions. With a more advanced molecular understanding in hand, a quintessential application (solvent extraction) is discussed, where significant opportunities exist to re-imagine the technical scope of an established technology.

Key Factors Determining Efficiency of Liquid-Liquid Extraction: Implications from Molecular Dynamics Simulations of Biphasic Behaviors of CyMe4-BTPhen and Its Am(III) Complexes

CyMe₄-BTPhen (2,9-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin-3-yl)-1,10-phenanthroline, denoted as L) has been considered as a promising extractant in lanthanide(III)/actinide(III) separation. Vast endeavors in its application put forward a compelling need on the understanding of the underlying mechanism in the liquid-liquid extraction. To address the issue of its dynamics in biphasic systems, we carried out molecular dynamics (MD) simulations of L and its complexes with a heavy f-block metal ion, americium(III) (Am³⁺) in "oil"/water binary solvents. Two types of organic phases have been considered, differing in the presence of octanol in the bulk n-dodecane or not, and the distribution of the solutes and their interfacial behaviors have been investigated. Two of the key factors that determine the efficiency of a liquid-liquid extraction protocol were delineated and discussed, that is, the appropriate ligand to enhance the lipophilicity of AmL complexes and appropriate way to form ion pairs to minimize the attraction between the complexes and aqueous phase. The simulations showed that the charge states of both ligand and AmL complexes were strongly correlated with their phase behavior, and the migration of neutral species was driven by van der Waals interactions while that of charged species by electrostatic interactions, indicating stronger lipophilicity of the former than the latter. The presence of octanol facilitated the migration of the ligand from the interface to the organic phase via hydrogen bond between its polar head and the ligand or the AmL complexes and constituted a polar core in the organic phase. This work bridged the widely used liquid-liquid extraction technique in chemistry to a fundamental chemical concept, that is, minimization of hydrophilicity and maximization of lipophilicity to facilitate phase transfer from the aqueous phase to the organic phase, and is expected to improve the understanding of dynamics of ligands and their complexes with metal ions and to contribute to the development of efficient protocols for phase transfer of target species.

Surfactant-enhanced heterogeneity of the aqueous interface drives water extraction into organic solvents

Liquid/liquid extraction (LLE) is one of the most industrially relevant separations methods. Adsorbed surfactant is demonstrated to enhance interfacial heterogeneity and lead to water protrusions that form the basis for transport into the organic phase.

Carboxylated carbon nanotubes corked with tetraalkylammonium cations: A concept of nanocarriers in aqueous solutions

An explicit water molecular dynamics simulations were used to probe (6,6) and (9,9) single-walled carbon nanotubes, functionalized with three carboxylate ion groups at each of the two openings, as potential nanocarriers in aqueous solutions. Three tetraalkylammonium cations (i.e., tetraethyl-, tetrapropyl-, and tetrabuthylammonium) were tested as corks to cap the nanotube openings. The variation of the sizes of the nanotubes (diameter) and of the cork cations (bulkiness) allowed us to select the proper corks that fit the nanotube openings best. Smaller tetraalkylammonium ions could easily fit the openings, but since they are less hydrophobic compared to their larger analogues they showed less affinity for the interior of the nanotubes. On the other hand, the hydrophobicity (and thus the affinity for the nanotubes) can be adjusted through the increase of tetraalkylammonium cation size, providing that the cork still fits the opening. Additionally, an external electric field was tested as a means of nanotube uncorking. The field is capable of disjoining corked ions from the functionalized nanotube openings, triggering in this way a potential cargo release stored inside the nanotubes.

Competitive Adsorption of Ions at the Oil-Water Interface: A Possible Mechanism Underlying the Separation Selectivity for Liquid-Liquid Solvent Extraction

Adsorption, especially competitive adsorption of ions at the interfaces, governs a wealth of physicochemical processes. Understanding the mechanism behind these interfacial behaviors is crucial for developing novel strategies to intensify reactions or transfer processes. Herein, as an example, we found that in the case of liquid-liquid transport of V(V) and Cr(VI) ions, the competitive adsorption of V(V) and Cr(VI) ions against coexisting SO₄^2- ions at the oil-water interface exhibits a significant impact on the selective separation behaviors of V(V) and Cr(VI) ions. The transport of Cr(VI) ions would be hindered by adding Na₂SO₄ into the aqueous solutions because of the competitive adsorption of SO₄^2- ions at the interface being stronger than that of Cr(VI) ions, whereas the transport of V(V) ions would not be affected because of the stronger affinity of V(V) ions to the interfaces compared to that of SO₄^2- ions. The present work provides new inspirations for developing efficient strategies to improve the separation efficiency of target ions with similar physic-chemical properties by regulating their adsorption behaviors at the interface. It is beneficial to get a deeper understanding into the microscopic nature of competitive adsorption behaviors of ions at interfaces from the interface-molecular level.

Determination of the Structures of Uranyl-Tri-n-butyl-Phosphate Aggregates by Coupling Experimental Results with Molecular Dynamic Simulations

The complex structure of a plutonium uranium refining by extraction (PUREX) process organic phase was characterized by combining results from experiments and molecular dynamics simulations. For the first time, the molecular interactions between tri-n-butyl phosphate (TBP) and the extracted solutes, as well as TBP aggregation after the extraction of water and/or uranyl nitrate, were described and analyzed concomitantly. Coupling molecular dynamics simulations with small- and wide-angle X-ray scattering (SWAXS) experiments can lead to simulated organic solutions that are representative of the experimental ones, even for high extractant and solute concentrations. Furthermore, this coupling is well adapted for the interpretation of SWAXS experiments without preliminary hypothesis on the size or shape of aggregates. The results link together previous literature studies obtained for each level of depiction separately (complexation or aggregation). Without uranium, or at low metal concentration, almost no aggregation was observed. At high uranium concentration, organic phases contain small [UO₂ (NO₃ )₂ (TBP)₂ ]_n polymetallic aggregates (with n=2 to 4), in which the 1:2 U/TBP stoichiometry is preserved.

Solvent Extraction: Structure of the Liquid-Liquid Interface Containing a Diamide Ligand

Knowledge of the (supra)molecular structure of an interface that contains amphiphilic ligand molecules is necessary for a full understanding of ion transfer during solvent extraction. Even if molecular dynamics already yield some insight in the molecular configurations in solution, hardly any experimental data giving access to distributions of both extractant molecules and ions at the liquid-liquid interface exist. Here, the combined application of X-ray and neutron reflectivity measurements represents a key milestone in the deduction of the interfacial structure and potential with respect to two different lipophilic ligands. Indeed, we show for the first time that hard trivalent cations can be repelled or attracted by the extractant-enriched interface according to the nature of the ligand.

Liquid–liquid extraction of alkali cations by 18-crown-6: complexation and interface crossing studied by MD and PMF simulations

The 18C6/M⁺Pic⁻complexes form and adsorb “right at the nano-interface” where 18C6 prefers the K⁺guest.

Uranyl extraction by N,N-dialkylamide ligands studied using static and dynamic DFT simulations

DFT/MM-MD simulations highlight the structure and dynamics of mixed uranyl/nitrato/monoamides (L) complexes at an “oil”/water interface.

A facile method of synthesizing ammonia modified graphene oxide for efficient removal of uranyl ions from aqueous medium

Adsorption of uranyl ions on NH₃ modified graphene oxide at pH 6.

Structural, energetic, and electronic properties of La(III)-dimethyl sulfoxide clusters

By using accurate density functional theory calculations, we have studied the cluster complexes of a La(3+) ion interacting with a small number of dimethyl sulfoxide (DMSO) molecules of growing size (from 1 to 12). Extended structural, energetic, and electronic structure analyses have been performed to provide a complete picture of the physical properties that are the basis of the interaction of La(III) with DMSO. Recent experimental data in the solid and liquid phase have suggested a coordination number of 8 DMSO molecules with a square antiprism geometry arranged similarly in the liquid and crystalline phases. By using a cluster approach on the La(3+)(DMSO)n gas phase isolated structures, we have found that the 8-fold geometry, albeit less regular than in the crystal, is probably the most stable cluster. Furthermore, we provide new evidence of a 9-fold complexation geometric arrangement that is competitive (at least energetically) with the 8-fold one and that might suggest the existence of transient structures with higher coordination numbers in the liquid phase.

Investigations on preferential Pu(IV) extraction over U(VI) by N,N-dihexyloctanamide versus tri-n-butyl phosphate: evidence through small angle neutron scattering and DFT studies

Straight chain amide N,N-dihexyloctanamide (DHOA) has been found to be a promising alternative extractant to tri-n-butyl phosphate (TBP) for the reprocessing of irradiated uranium- and thorium-based fuels. Unlike TBP, DHOA displays preferential extraction of Pu(IV) over U(VI) at higher acidities (≥3 M HNO3) and poor extraction at lower acidities. Density functional theory (DFT) based calculations have been carried out on the structures and relative binding energies of U(VI) and Pu(IV) with the extractant molecules. These calculations suggest that the differential hardness of the two extractants is responsible for the preferential binding/complexation of TBP to uranyl, whereas the softer DHOA and the bulky nature of the extractant lead to stronger binding/complexation of DHOA to Pu(IV). In conjunction with quantum chemical calculations, small angle neutron scattering (SANS) measurements have also been performed for understanding the stoichiometry of the complex formed that leads to relatively lower extraction of Th(IV) (a model for Pu(IV)) as compared to U(VI) using DHOA and TBP as the extractants. The combined experimental and theoretical studies helped us to understand the superior complexation/extraction behavior of Pu(IV) over U(VI) with DHOA.