Time-Resolved EPR Study of Singlet Oxygen in the Gas Phase

Singlet Oxygen Photophysics: From Liquid Solvents to Mammalian Cells

Molecular oxygen, O2, has long provided a cornerstone for studies in chemistry, physics, and biology. Although the triplet ground state, O2(X3Σg-), has garnered much attention, the lowest excited electronic state, O2(a1Δg), commonly called singlet oxygen, has attracted appreciable interest, principally because of its unique chemical reactivity in systems ranging from the Earth's atmosphere to biological cells. Because O2(a1Δg) can be produced and deactivated in processes that involve light, the photophysics of O2(a1Δg) are equally important. Moreover, pathways for O2(a1Δg) deactivation that regenerate O2(X3Σg-), which address fundamental principles unto themselves, kinetically compete with the chemical reactions of O2(a1Δg) and, thus, have practical significance. Due to technological advances (e.g., lasers, optical detectors, microscopes), data acquired in the past ∼20 years have increased our understanding of O2(a1Δg) photophysics appreciably and facilitated both spatial and temporal control over the behavior of O2(a1Δg). One goal of this Review is to summarize recent developments that have broad ramifications, focusing on systems in which oxygen forms a contact complex with an organic molecule M (e.g., a liquid solvent). An important concept is the role played by the M+•O2-• charge-transfer state in both the formation and deactivation of O2(a1Δg).

Singlet oxygen is an emissive ligand

Unprecedented experimental evidence shows that gaseous singlet oxygen (1O2) acts as an emissive ligand following collisional photosensitization. This evidence was obtained by monitoring 1O2 phosphorescence intensity at ≈1275-1280 nm and the excited state lifetime of singlet oxygen generated by known tetraphenylporphyrin photosensitizers, while varying the atmospheric environment.

Singlet Oxygen and Superoxide Anion Radical Detection by EPR Spin Trapping in Thylakoid Preparations

Reactive oxygen species (ROS) are produced by energy transfer and electron transport in plant chloroplast thylakoids at non-toxic levels under normal growth conditions, but at threatening levels under adverse or fluctuating environmental conditions. Among chloroplast ROS, singlet oxygen and superoxide anion radical, respectively, produced by photosystem II (PSII) and PSI, are known to be the major ROS under several stress conditions. Both are very unlikely to diffuse out of chloroplasts, but they are instead capable of triggering ROS-mediated chloroplast operational retrograde signalling to activate defence gene expression in concert with hormones and other molecular compounds. Therefore, their detection, identification and localization in vivo or in biological preparations is a priority for a deeper understanding of their role in (concurrent) regulation of plant growth and defence responses. Here, we present two EPR spin traps, abbreviated as TEMPD-HCl and DEPMPO, to detect and identify ROS in complex systems, such as isolated thylakoids, together with some hints and cautions to perform reliable spin trapping experiments.

Tuning the 1O2 Oxidation of a Phenol at the Air/Solid Interface of a Nanoparticle: Hydrophobic Surface Increases Oxophilicity

Although silica surfaces have been used in organic oxidations for the production of peroxides, studies of airborne singlet oxygen at interfaces are limited and have not found widespread advantages. Here, with prenyl phenol-coated silica and delivery of singlet oxygen (¹O₂) through the gas phase, we uncover significant selectivity for dihydrofuran formation over allylic hydroperoxide formation. The hydrophobic particle causes prenyl phenol to produce an iso-hydroperoxide intermediate with an internally protonated oxygen atom, which leads to dihydrofuran formation as well as O atom transfer. In contrast, hydrophilic particles cause prenyl phenol to produce allylic hydroperoxide, due to phenol OH hydrogen bonding with SiOH surface groups. Mechanistic insight is provided by air/nanoparticle interfaces coated with the prenyl phenol, in which product yield was 6-fold greater on the hydrophobic nanoparticles compared to the hydrophilic nanoparticles and total rate constants (ASI-k_T) of ¹O₂ were 13-fold greater on the hydrophobic vs hydrophilic nanoparticles. A slope intersection method was also developed that uses the airborne ¹O₂ lifetime (τ_airborne) and surface-associated ¹O₂ lifetime (τ_surf) to quantitate ¹O₂ transitioning from volatile to non-volatile and surface boundary (surface···¹O₂). Further mechanistic insights on the selectivity of the reaction of prenyl phenol with ¹O₂ was provided by density functional theory calculations.

Porphyrin-Containing MOFs and COFs as Heterogeneous Photosensitizers for Singlet Oxygen-Based Antimicrobial Nanodevices

Visible-light irradiation of porphyrin and metalloporphyrin dyes in the presence of molecular oxygen can result in the photocatalytic generation of singlet oxygen (¹O₂). This type II reactive oxygen species (ROS) finds many applications where the dye, also called the photosensitizer, is dissolved (i.e., homogeneous phase) along with the substrate to be oxidized. In contrast, metal-organic frameworks (MOFs) are insoluble (or will disassemble) when placed in a solvent. When stable as a suspension, MOFs adsorb a large amount of O₂ and photocatalytically generate ¹O₂ in a heterogeneous process efficiently. Considering the immense surface area and great capacity for gas adsorption of MOFs, they seem ideal candidates for this application. Very recently, covalent-organic frameworks (COFs), variants where reticulation relies on covalent rather than coordination bonds, have emerged as efficient photosensitizers. This comprehensive mini review describes recent developments in the use of porphyrin-based or porphyrin-containing MOFs and COFs, including nanosized versions, as heterogeneous photosensitizers of singlet oxygen toward antimicrobial applications.

Porphyrin-based MOFs as heterogeneous photocatalysts for the eradication of organic pollutants and toxins

Water and air pollution are among the major environmental challenges of this era. Waste management, economic sustainable development and renewable energy are unavoidable concomitant considerations. Over the past five years, nanosized metal-organic frameworks (nano-MOFs) have been developed for the elimination of pollutants in wet media and air-born toxins using the highly efficient reactive oxygen species (ROS) of type I (H2O2, •OH, O[Formula: see text] and of type II (1O[Formula: see text]. The ROS are catalytically and efficiently generated through photosensitization, and porphyrins and metalloporphyrins are pigments of choice for this purpose. This short review summarizes the fundamentals of ROS generation by porphyrin-based nano-MOFs (mainly through the formation of ROS type II) and their composites (leading to ROS type I), which includes energy and electron transfer processes, and their applications in these environmental issues.

Interparticle Delivery and Detection of Volatile Singlet Oxygen at Air/Solid Interfaces

An interparticle system has been devised, allowing airborne singlet oxygen to transfer between particle surfaces. Singlet oxygen is photogenerated on a sensitizer particle, where it then travels through air to a second particle bearing an oxidizable compound-a particulate-based approach with some similarities to reactive oxygen quenching in the atmosphere. In atmospheric photochemistry, singlet oxygen is generated by natural particulate matter, but its formation and quenching between particles has until now not been determined. Determining how singlet oxygen reacts on a second surface is useful and was developed by a three-phase system (particle-air-particle) interparticulate photoreaction with tunable quenching properties. We identify singlet oxygen quenching directly by near-IR phosphorescence in the airborne state and at the air/particle interface for total quenching rate constants (k_T) of adsorbed anthracene trapping agents. The air/solid interface k_T of singlet oxygen by anthracene-coated particles was (2.8 ± 0.8) × 10⁷ g mol^-1 s^-1 for 9,10-dimethylanthracene and (2.1 ± 0.9) × 10⁷ g mol^-1 s^-1 for 9,10-anthracene dipropionate dianion, and the lifetime of airborne singlet oxygen was measured to be 550 μs. These real-time interactions and particle-induced quenching steps open up new opportunities for singlet oxygen research of atmospheric and particulate processes.

Lifetime and diffusion distance of singlet oxygen in air under everyday atmospheric conditions

Singlet oxygen is a toxic chemical but powerful oxidant, exploited in many chemical and biological applications. However, the lifetime of singlet oxygen in air under atmospheric conditions is yet to be known. This has limited safe usage of singlet oxygen in air, despite being a strong antimicrobial agent with the unique property of relaxing to breathable oxygen after serving its purpose. Here, we solve this long-standing problem by combining experimental and theoretical research efforts; we generate singlet oxygen using a photosensitizer at a local source and monitor the time-dependent extent of singlet oxygen reaction with probe molecules at a detector, precisely controlling the detector distance from the source. To explain our experimental results, we employ a theoretical model that fully accounts for singlet oxygen diffusion, radiative and nonradiative relaxations, and the bimolecular reaction with probe molecules at the detector. For all cases investigated, our model, with only two adjustable parameters, provides an excellent quantitative explanation of the experiment. From this analysis, we extract the lifetime of singlet oxygen in the air to be 2.80 s at 23 °C under 1 atm, during which time singlet oxygen diffuses about 0.992 cm. The correctness of this estimation is confirmed by a simple mean-first-passage time analysis of the maximum distance singlet oxygen can reach from the source. We also confirm the sterilization effects of singlet oxygen for distances up to 0.6-0.8 cm, depending on the bacteria strain in question, between the bacteria and the singlet oxygen source.

Understanding and controlling the efficiency of Au24M(SR)18 nanoclusters as singlet-oxygen photosensitizers

Singlet oxygen, 1O2, can be generated by molecules that upon photoexcitation enable the 3O2 → 1O2 transition. We used a series of atomically precise Au24M(SR)18 clusters, with different R groups and doping metal atoms M. Upon nanosecond photoexcitation of the cluster, 1O2 was efficiently generated. Detection was carried out by time-resolved electron paramagnetic resonance (TREPR) spectroscopy. The resulting TREPR transient yielded the 1O2 lifetime as a function of the nature of the cluster. We found that: these clusters indeed generate 1O2 by forming a triplet state; a more positive oxidation potential of the molecular cluster corresponds to a longer 1O2 lifetime; proper design of the cluster yields results analogous to those of a well-known reference photosensitizer, although more effectively. Comprehensive kinetic analysis provided important insights into the mechanism and driving-force dependence of the quenching of 1O2 by gold nanoclusters. Understanding on a molecular basis why these molecules may perform so well in 1O2 photosensitization is instrumental to controlling their performance.

Direct EPR detection of atomic nitrogen in an atmospheric nitrogen plasma jet

In this study, an atmospheric nitrogen plasma jet generated by a custom-built micro-plasma device was analyzed at room temperature by continuous wave and pulse EPR spectroscopy in real time. Transiently formed nitrogen atoms were detected without the necessity to use spin-traps or other reagents for their stabilization. In contrast to results from optical emission spectroscopy, only signals from the ⁴S ground state of ¹⁴N and ¹⁵N could be detected. EPR data analysis revealed an isotropic g value of 1.9971 and isotropic hyperfine coupling constants of a(¹⁴N) = (10.47 ± 0.02) MHz and a(¹⁵N) = (14.69 ± 0.02) MHz. Moreover, lifetime and relaxation data could be determined; both are discussed in terms of spectral widths and actual concentrations of the transiently formed nitrogen species within the plasma jet. The data show that the lifetimes of atomic nitrogen and charged particles such as N⁺ must be different, and for the latter below the observation time window of EPR spectroscopy. We demonstrate that the real-time (pulsed) EPR technique is a fast and reliable alternative to detect atomic nitrogen in atmospheric pressure plasma jets. The method may be used for a continuous monitoring of the quality of plasma jets.

Oxidative damage and antioxidative system in algae

Reactive oxygen species (ROS) typically produce in algae and act as secondary messengers in numerous cellular processes. Under abiotic stresses, the balance between production and suppression of ROS disappears and causes increase of ROS. Increasing excessive ROS can cause damage to various cellular components comprising cell membranes, proteins and lipids. Algae have an antioxidant defense system to overcome on oxidative damage. Antioxidant defense mechanisms are of two types, namely enzymatic and non-enzymatic antioxidants. The enzymatic antioxidants include superoxide dismutase, catalase, ascorbate peroxidase and glutathione reductase. The non-enzymatic antioxidants include carotenoids, tocopherol, ascorbic acid, glutathione, flavonoids and phenolic compounds. In this review, we describe the various types of ROS and their production, and antioxidant defense mechanisms for ROS suppression.

Photochemical C-H oxygenation of side-chain methyl groups in polypropylene with chlorine dioxide

The chlorine dioxide radical (ClO2˙) was found to act as an efficient oxidizing agent for the aerobic C-H oxygenation of the side-chain methyl groups in polypropylene under photoirradiation and ambient conditions (298 K and 1 atm). The oxygenated side-chain methyl groups were selectively converted to carboxylic acid and hydroxy groups.

A novel characteristic of salicylate UV absorbers: suppression of diethylhexyl 2,6-naphthalate (Corapan TQ)-photosensitized singlet oxygen generation

40% of the quantum yield of DEHN-photosensitized singlet oxygen generation is decreased by adding 32 mmol dm⁻³ EHS.

Reactive oxygen species: Reactions and detection from photosynthetic tissues

Reactive oxygen species (ROS) have long been recognized as compounds with dual roles. They cause cellular damage by reacting with biomolecules but they also function as agents of cellular signaling. Several different oxygen-containing compounds are classified as ROS because they react, at least with certain partners, more rapidly than ground-state molecular oxygen or because they are known to have biological effects. The present review describes the typical reactions of the most important ROS. The reactions are the basis for both the detection methods and for prediction of reactions between ROS and biomolecules. Chemical and physical methods used for detection, visualization and quantification of ROS from plants, algae and cyanobacteria will be reviewed. The main focus will be on photosynthetic tissues, and limitations of the methods will be discussed.

The preparation of tubular heterostructures based on titanium dioxide and silica nanotubes and their photocatalytic activity

Tubular heterostructures based on titanium dioxide (TiO2) and silica nanotubes (SNTs) with high photocatalytic activity have been successfully obtained by a simple combination of an electrospinning technique and a solvothermal process. The as-prepared products were characterized by field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and N2 absorption-desorption experiments. The results confirmed that SNTs with high specific surface area were obtained by efficiently controlling the phase separation and solvent evaporation during the process of electrospinning and calcination, and TiO2 was successfully grown on the SNT substrates. The obtained titanium dioxide/silica nanotubes (TiO2/SNTs) heterostructures showed high photocatalytic activities to degrade Rhodamine 6G because of the formation of heterostructures, which might improve the separation of photogenerated electrons and holes. Furthermore, the TiO2/SNTs heterostructures could be easily recycled without an evident decrease in photocatalytic activity.