Study of Micelle Formation by Fluorocarbon Surfactant N-(2-hydroxypropyl)perfluorooctane Amide in Aqueous Solution

QSPR-based prediction of air-water interfacial adsorption coefficients for nonionic PFAS with large headgroups

Air-water interfacial adsorption has been demonstrated to be an important process affecting the retention and distribution of PFAS in soil, surface waters, and the atmosphere, as well as being central to certain remediation methods. Measured or estimated air-water interfacial adsorption coefficients are needed for quantifying and modeling the interfacial adsorption of PFAS. A single-descriptor QSPR model developed in prior work for predicting air-water interfacial adsorption coefficients of PFAS was demonstrated to successfully represent more than 60 different PFAS, comprising all headgroup types and a wide variety of tail structures. However, the model overpredicted values for nonionic PFAS with very large headgroups. A revised QSPR model was developed in the present study to predict air-water interfacial adsorption coefficients for nonionic PFAS with large headgroups. A two-descriptor QSPR model employing molar volume and headgroup-to-tail molar-volume ratio successfully represented measured data for both nonionic PFAS and nonionic hydrocarbon surfactants. This new model provides a means to produce estimates of air-water interfacial adsorption coefficients for nonionic PFAS for which measured values are typically not available.

Exploring the role of polymer hydrophobicity in polymer-metal binding thermodynamics

Metal-chelating polymers play a key role in rare-earth element (REE) extraction and separation processes. Often, these processes occur in aqueous solution, but the interactions among water, polymer, and REE are largely under-investigated in these applications. To probe these interactions, we synthesized a series of poly(amino acid acrylamide)s with systematically varied hydrophobicity around a consistent chelating group (carboxylate). We then measured the ΔH of Eu³⁺ chelation as a function of temperature across the polymer series using isothermal titration calorimetry (ITC) to give the change in heat capacity (ΔC_P). We observed an order of magnitude variation in ΔC_P (39-471 J mol¹ K^-1) with changes in the hydrophobicity of the polymer. Atomistic simulations of the polymer-metal-water interactions revealed greater Eu³⁺ and polymer desolvation when binding to the more hydrophobic polymers. These combined experimental and computational results demonstrate that metal binding in aqueous solution can be modulated not only by directly modifying the chelating groups, but also by altering the molecular environment around the chelating site, thus suggesting a new design principle for developing increasingly effective metal-chelating materials.

PAMAM-Based Dendrimers with Different Alkyl Chains Self-Assemble on Silica Surfaces: Controllable Layer Structure and Molecular Aggregation

Amphiphilic poly(amidoamine) (PAMAM) dendrimers are a well-known dendritic family due to their remarkable ability to self-assemble on solid surface. However, the relationship between molecular conformation (or adsorption kinetics) of a self-assembled layer and molecular amphiphilicity of such kind of dendrimer is still lacking, which limits the development of modulating self-assembling structures and surface functionality. With this in mind, we synthesized a series of amphiphilic PAMAM-based dendrimers, denoted as G₁C _n, with different alkyl chains ( n = 8, 12, and 16), and investigated the molecular aggregation on silica surfaces by means of quartz crystal microbalance with dissipation, atomic force microscopy, and contact angle. After rinsing, remaining adsorption amounts of G₁C₁₂ were higher than those of G₁C₈ at high concentrations, suggesting that G₁C₁₂ adlayers were more stable due to the stronger intermolecular hydrophobic interactions, whereas it preferred to adopt the intramolecular hydrophobic interactions for G₁C₁₆, with low adsorption amounts and unstable adlayers. Bilayer-like structures were inferred in G₁C₈ and G₁C₁₂ adlayers with loose conformation, whereas monolayer structures were likely to exist in the sparse adsorption film of G₁C₁₆. Our results provided more detailed understanding of the effect of molecular structure on the self-assembled structures of amphiphilic dendrimers on solid surfaces, shedding light on the controlled microstructure and wettability of functional surface by modulating the length of hydrophobic chains of dendrimers and a potential application of dendrimer-substrate combinations.

Effect of counterions on anionic fluorocarbon surfactant micelles by dielectric spectroscopy

The effect of counterions on dielectric behaviors of anionic fluorocarbon surfactants solutions was insighted in the frequency of 40–110 MHz. The dielectric increments Δεof all the surfactants can be divided into different groups, the reason was analyzed and the average radiusR̄was calculated according to Grosse's model, which confirmed the reliability of dielectric analysis, and the structure of micelles was proposed as the figure.

Investigation on the aggregation behavior of photo-responsive system composed of 1-hexadecyl-3-methylimidazolium bromide and 2-methoxycinnamic acid

Mechanism of the aggregation behavior for the photo-responsive system composed of 1-hexadecyl-3-methylimidazolium bromide and 2-methoxycinnamic acid.

Study on the reutilization of clear fracturing flowback fluids in surfactant flooding with additives for Enhanced Oil Recovery (EOR)

An investigation was conducted to study the reutilization of clear fracturing flowback fluids composed of viscoelastic surfactants (VES) with additives in surfactant flooding, making the process more efficient and cost-effective. The clear fracturing flowback fluids were used as surfactant flooding system with the addition of α-olefin sulfonate (AOS) for enhanced oil recovery (EOR). The interfacial activity, emulsification activity and oil recovery capability of the recycling system were studied. The interfacial tension (IFT) between recycling system and oil can be reduced by 2 orders of magnitude to 10⁻³ mN/m, which satisfies the basic demand of surfactant flooding. The oil can be emulsified and dispersed more easily due to the synergetic effect of VES and AOS. The oil-wet surface of quartz can be easily converted to water-wet through adsorption of surfactants (VES/AOS) on the surface. Thirteen core plug flooding tests were conducted to investigate the effects of AOS concentrations, slug sizes and slug types of the recycling system on the incremental oil recovery. The investigations prove that reclaiming clear fracturing flowback fluids after fracturing operation and reuse it in surfactant flooding might have less impact on environment and be more economical.

Investigation of micelle formation by N-(diethyleneglycol) perfluorooctane amide fluorocarbon surfactant as a foaming agent in aqueous solution

A novel nonionic fluorocarbon surfactant is synthesized and indicates excellent foaming performance and super surface activity.